Industrial GPRS data collection device for digital signals of industrial systems and pulse signals of residential meters
Cost-effective, C-rail mountable industrial modem for receiving digital signals and collecting pulse signals of residential meters.
The modem is capable of continuously counting the pulse signals of up to 4 meter systems.
The device transmits the calculated input signal values through Modbus TCP protocol to query servers Modbus TCP.
The queries of the data sets are performed periodically (e.g. in every 15 minutes) depending on the server value set.
When it has to receive signals from more than 4 devices, we suggest using the M2M IO/RS485 CONCENTRATOR�® which has 32 input lines.
In this case the device requests the concentrator input counter status through the modems RS485 interface, and fowards the received Modbus RTU reply through Modbus TCP protocol to query the servers Modbus TCP.
The modem can initiate queries through its RS485 interface towards several concentrators input lines.
Furthermore, the modem can switch external devices (optionally) with the help of its 2 relay outputs.
Communication
Supporting GSM/GPRS (Gemalto�® industrial module)
4 inputs (digital or pulse/voltage)
2 relay outputs (optional)
Software/Configuration
Modbus protocol communication
Modbus Gateway
Consumption meter compatibility (receiving and counting pulse signals)
Configuration software (on RS232 or RS485 port)
Extras
Memory for storage of applications, data (with ftp possibility)
External IO-expansion (optional for receiving 32 inputs per module)
Firmware upgrades (ftp server)
Safety
External battery connection (spare power supply)
Watchdog circuit and system monitoring, log
Automatic mobile network connection recovery
Application
Data collection (digital or pulse signal)
Forwarding data of industrial systems
Smart metering (remote readout)
Measurement and data collecting systems
Remote monitoring of devices
Monitoring of input lines
Remote control (optional)
Scalable, smart street lighting switcher with remote control and NB-IoT (Narrow-Band) Cat.M1 & LTE-M access
Cost-effective smart modem with lighting monitoring, remote and central switching control of street lighting units (street lamps).
Using a switch box and smart metering router â?? as one device.
The device is capable of receiving the P1 customer interface data of the WM-E3S electricity metering modems. Also counts switches and the amount of lighting hours, using daylight saving time â?? according to the current time zone.
The device is connecting via Narrow-Band mobile network â?? via OSLP protocol â?? to the server through secure authentication and it serves relay switch requests.
The lighting switch can be initiated remotely from the head-end centre, on-demand or in scheduled intervals (according the current daylight savi
ng). It provides reports from the daily events (immediately/pre-defined intervals â?? due to the local event storage feature).
Secure and future-proof solution, which offers reliable and efficient services due to central monitoring, control. Low investment solution, while decrease the outages, saving cost (optimize the lightin operation hours). You donâ??t need to mess with routers, control boxes anymore â?? maintain a clear and simple smart grid!
The scalable, flexible M2M Device Manager® provides remote management and monitoring features of the devices for the everyday operation of the street lighting, firmware updates, assures remote configuration for the devices.
Features
- Central switching for authorized persons only
- 4pcs relay for control (two switch modes)
- Light switching by schedules, depending on weekdays/sunset/geo-position â?? or by on-demand
- Event and operation monitoring and reporting
- Remote parametring, fw updates, reboot
- Supercapacitor against outages
- Security features
Application
- Energy service providers
- Utility companies
- Street Light providers
- Energy suppliers
- Smart Grid operators
- Lighting maintenance
- Smart city
Easy to configure wireless Narrow-Band/IoT pulse counter, voltage/contact signal transmitter with Modbus RTU, remote monitoring and output control for utilities, companies, industry
Cost-effective wireless pulse counter, input signal transmitter for industrial companies and utility providers.
It is receiving and counting incoming digital signals (contact/voltage/pulse) of connected meters (1 to 8 water or gas meters), measurement devices â?? through IO port.
The communicator is providing wireless data transmitting through the Narrow-Band mobile network to the data center.
Suitable for answering Modbus RTU request of a Scada system, where it is responsing meter count data towards to the centre.
It is also useful for remote monitoring of inputs (external device current status) and for output control (remote switch or gate opening).
Easy to configure (remote, local by a free tool), easy to use. The communicator can be accessed remotely.
The data evaluation on server side, where we offer our EMR Metering® platform. Remote management due to the M2M Device Manager®.
Versatile and professional LTE 450 router with WiFi, Dual-SIM and further expansion options
DIN rail mountable, versatile, wireless DUAL SIM industrial LTE router with WiFi, Ethernet port and several expansion possibilities.
The device uses the open source OpenWRT® operation system, supporting web admin interface.
The following expansion options can be chosen: RS232/RS485, Wireless MBus or IO-expansion.
Communication
Supporting the LTE 450 (450MHz Cat.4 module)
Usage of Dual SIM cards
WiFi (for the connected devices)
It can be extended with the listed modules
Self-developed expansion modules to integrate
Ethernet LAN/WAN
Software/Configuration
Easy to use open source OpenWRT® software
Opportunity for the developers to implement and use self-developed system or applications
The device can be parameterized on its web page by the local/remote interface
Firmware & software updates and parameterizing remotely by the M2M Device Manager® software
Security
System monitoring, auto restart mode
High availability
Extended tests during the development
Protection from network attack, traffic monitoring helps to reduce data usage
Application
Wireless data transmission, routing
Secondary/backup route
Industrial M2M machines (to a Scada)
Utility smart meters (remote readout)
Safety camera, DVR
Data concentrator with 32 digital inputs and Modbus RTU communication
Cost-effective industrial solution for reading out the data of consumption metering devices (e.g. water, gas, electricity meters) equipped with contact or pulse output line.
Furthermore, the concentrator can connect to any kind of measurement devices, PLCs, controlling machines, data collection system, automata or a network analyzer.
The device is capable of collecting and storing data of up to 32 endpoint devices through the input lines.
The M2M Modem Plus IO® device is connected through the RS485 port to read out the input values with Modbus RTU protocol.
Connection
32x digital inputs (4 segment x 8 isolable inputs, operation mode selection by jumper)
Receiving and counting the contact/pulse signals
Dry/wet contact relay
Open collector input
Receiving the output signals as input signals (alternate wiring)
Receiving reed/hall sensor outputs
RS485 output (ModBus RTU protocol towards the modem)
Software/Configuration
Modbus protocol communication
Readout of Modbus counters, registers
PLC compatibility
Configuration software (locally on serial port)
Security
Watchdog circuit and system monitoring
Data storage into non-volatile memory
Application
Data collection and counting
Measurement and data collection systems
Forwarding industrial system or PLC data
Monitoring industrial or measurement devices
Remote control
DIN-rail mountable, universal 4G LTE router with wireless data forwarding capabilities, Ethernet port and industrial design.
The device uses the open source OpenWRT® operation system and provides web admin interface.
Communication
Supporting the 4G LTE Cat.3 (Telit® module)
Ethernet LAN/WAN
Software/Configuration
Easy to use open source OpenWRT® software with webadmin interface
Opportunity for the developers to implement and use self-developed system or applications
Firmware & software updates and parametrizing remotely by the M2M Device Manager® software
Security
System monitoring, auto restart mode
High availability and stable IP connection
Protection from network attack, traffic monitoring helps to reduce data usage
Application
Wireless data transmission, routing
Secondary/backup route
Industrial M2M and measurement, data collecting devices, PLCs (to a Scada)
Remote access, monitoring, maintenance
Utility smart meters (remote readout)
Safety camera, DVR
1. Main
The H685 series Cellular Router designed for establish a 2G/3G/4G cellular and Wi-Fi wireless network and share a cellular broad band Internet connection. The H685 series Cellular Router enables users to quickly create a secure Wi-Fi (802.11 b/g/n) network and provide access to the Internet using a cellular network. By connect to cellular mobile network; an Internet connection can be accessed and shared virtually anywhere within a wireless broadband network.
2. Hot Spot
Built-in 2G/3G/4G industrial cellular module and sim card slot, insert SIM/UIM card to work directly.
Auto-dial feature, keep alive link
Built-in watch dog
1 WAN RJ45 port + 1 LAN RJ45 port (WAN RJ45 can convert into LAN RJ45 to get 2 LAN RJ45)
VPN (PPTP, L2TP, IPSec, GRE, Tunnel), SNMP
standard SMA antenna can be replaced with high gain type
Terminal port for DTU feature (Serial to Cellular Gateway feature,RS232 or RS485 option)
WiFi 802.11b/g/n 150Mbps (optional), can choose 300Mbps.
RJ45 WAN (xDS L) and Cellular backup each other (Route Fail Over Feature)
Two H685 can backup each other if one H685 line failed. (to be Dual sim dual module feature)
Always online, Reboot if the connection is failed.
WiFi can be used as WiFi client
Cellular, WAN RJ45 and WiFi Client can failover backup each other redundancy.
SMS/Voice call to control router to be online and offline (optional)
GPS (optional)
VRRP
RIP OSPF BGP (optional)
I/O port *2 (optional)
POE support (optional)
3. Wireless M2M Application
Remote Data Monitor and Control
CCTV, security surveillance
Water, gas and oil flow metering and schedule
AMR (automatic meter reading)
Power station monitoring and control
Remote POS (point of sale) terminals, ATM,
Traffic signals monitor and control, Traffic info guidance
Oil field, weather forecast, environmental protection, street lamp monitoring and control
Early Warning of Mountain Torrent
Fleet management
Power distribution network supervision
Central heating system supervision
Weather station data transmission
Hydrologic data acquisition
Vending machine
Telemetry, SCADA
Vehicle logistics and diagnostics controlling
Parking meter and Taxi Monitor
Telecom equipment supervision (Mobile base station, microwave or optical relay station)
OS
Windows, Linux, Mac OS, IOS, Symbian, Android, other OS support web browser;
Physical
Operating Temperature:
Work temperature: -30°C to 70°C option for -30°C to 80°C
Storage temperature: -40°C to 85°C
Humidity: 95% Maximum (Non-condensing)
Dimensions:
PCBA: 96mm x 56mm x 14mm
With case: 100mm x 60mm x 21mm
Weight:
220g (not including the antenna)
330g (including the antenna)
650g (including all accessories, without package)
The float switch is application in all those cases where it is necessary to control the level of non-aggressive liquids, both in civil and industrial facilities (wells, cisterns, cesspools, sewers). Has a high resistance to most acids and bases mineral up to 10% concentration. The housing of the float is made of polypropylene copolymer: it is impact resistant, suitable for contact with food and nickable by solvents at room temperature. Degree of protection to "CEI 64-8" - IP 67 (immersion up to 20 meters). Maximum operating temperature: 70 C. The neoprene cable H07 RN-F 3 1 mm is IMQ and T V approved.
Buy Float Switch 2 Mtr online in India at wholesale rates. If you have been looking for Float Switch 2 Mtr dealers, your search ends here as you can get the best Float Switch 2 Mtr distributors in top cities such as Delhi NCR, Mumbai, Chennai, Bengaluru, Kolkata, Chennai, Pune, Jaipur, Hyderabad and Ahmedabad. You can purchase Float Switch 2 Mtr of the finest quality and rest assured to get the best in terms of both durability and performance. If you are bothered about the Float Switch 2 Mtr prices, you can be totally sure to get the best rates as Industrybuying brings you genuine Float Switch 2 Mtr rates and quality assured products only from the best of brands with exclusive brand discounts you wont find anywhere else. Procure Float Switch 2 Mtr today and avail the best offers on your purchase.
1. Main
The H685 series Cellular Router designed for establish a 2G/3G/4G cellular and Wi-Fi wireless network and share a cellular broad band Internet connection. The H685 series Cellular Router enables users to quickly create a secure Wi-Fi (802.11 b/g/n) network and provide access to the Internet using a cellular network. By connect to cellular mobile network; an Internet connection can be accessed and shared virtually anywhere within a wireless broadband network.
E-Lins¡¯ mobile data products are widely used in more than 50 countries and regions, and more than twenty industrial fields, such as power control, water schedule, traffic, oil field, weather forecast, environmental protection, street lamp control, post, bank and many other areas..
2. Hot Spot
Built-in 2G/3G/4G industrial cellular module and sim card slot, insert SIM/UIM card to work directly.
Auto-dial feature, keep alive link
Built-in watch dog
1 WAN RJ45 port + 1 LAN RJ45 port (WAN RJ45 can convert into LAN RJ45 to get 2 LAN RJ45)
VPN (PPTP, L2TP, IPSec, GRE, Tunnel), SNMP
standard SMA antenna can be replaced with high gain type
Terminal port for DTU feature (Serial to Cellular Gateway feature,RS232 or RS485 option)
WiFi 802.11b/g/n 150Mbps (optional), can choose 300Mbps.
RJ45 WAN (xDSL) and Cellular backup each other (Route Fail Over Feature)
Two H685 can backup each other if one H685 line failed. (to be Dual sim dual module feature)
Always online, Reboot if the connection is failed.
WiFi can be used as WiFi client
Cellular, WAN RJ45 and WiFi Client can failover backup each other redundancy.
SMS/Voice call to control router to be online and offline (optional)
GPS (optional)
VRRP
RIP OSPF BGP (optional)
I/O port *2 (optional)
POE support (optional)
3. Wireless M2M Application
Remote Data Monitor and Control
CCTV, security surveillance
Water, gas and oil flow metering and schedule
AMR (automatic meter reading)
Power station monitoring and control
Remote POS (point of sale) terminals, ATM,
Traffic signals monitor and control, Traffic info guidance
Oil field, weather forecast, environmental protection, street lamp monitoring and control
Early Warning of Mountain Torrent
Fleet management
Power distribution network supervision
Central heating system supervision
Weather station data transmission
Hydrologic data acquisition
Vending machine
Telemetry, SCADA
Vehicle logistics and diagnostics controlling
Parking meter and Taxi Monitor
Telecom equipment supervision (Mobile base station, microwave or optical relay station)
Wireless Radio Band:
3G UMTS/HSPA/HSUPA/HSPA/HSPA+ (WCDMA/FDD) 2100Mhz or 850/1900/2100MHz or 850/900/1900/2100Mhz;
2G GSM 900/1800Mhz dual band or 850/900/1800/1900Mhz quad-band;
CDMA1x/EVDO: 800/1900Mhz or 450Mhz option;
3G TD-SCDMA 2010~2025MHz/1880~1920MHz;
4G FDD LTE:
Band 17--700(B17)/AWS
Band 13--700(B13)MHz
Band 20--DD800Mhz
Band 8--900Mhz
Band 12¡ª700Mhz
Band 3--1800Mhz
Band 1--2100Mhz
Band 7--2600MHz
4G TDD LTE:
Band 40 -- 2300Mhz
Band 39 -- 1900Mhz
Band 38 --2600Mhz
Main:
SMS/Voice (optional): SMS/Voice call to control router to be online, offline and reboot;
GPS (Optional): Yes;
DTU (Optional):
With DTU feature (Serial to Cellular Gateway feature, RS232 or RS485 port option).
Details:
Serial Baudrate: 300bps, 600bps, 1200bps, 2400bps, 4800bps, 9600bps, 19200bps, 38400bps, 57600bps, 115200bps;
Serial Parity: none, even, odd;
Serial Databits: 7, 8;
Serial stopbits: 1, 2;
Serial flow control: none, hardware, software;
Mode: Server (up to 4 server centre, can OEM to be more), Client;
Protocol: TCP, UDP ;
Heart Beat : Yes;
VPN: PPTP, L2TP, IPSec, GRE, Tunnel
VRRP: Optional
BGP, OSPF: Optional
SNMP: Support V1, V2. V3
VLAN: Support multi-LAN IP address, support two IP address
Wi-Fi: Optional, 802.11b/g/n; 150Mbps default. 300Mbps optional.
Frequency from 2.4GHz to 2.483GHz,Access Points, Routers and Gateway Server Applications, wireless up to 254 PC users
Fail Over Redundancy (network Backup feature):
Auto-dial feature, keep alive link;
Built-in watch dog;
Cellular (2G/3G/4G), RJ45 WAN (xDSL, DHCP, Fixed IP), WiFi client three line redundancy;
Two H685 dual sim same network(Network1+ Network1);
Two H685 dual sim two network (Network2+ Network 2);
Two H685 dual sim dual mode network (WCDMA+CDMA2000, WCDMA+LTE, CDMA2000+LTE);
LAN/WAN
1X 10/100M LAN port (RJ45 interface)
1X 10/100M WAN port (RJ45 interface)
(WAN RJ45 can convert into LAN RJ45 to get 2 LAN RJ45)
Antenna
2 antenna for Wi-Fi (detachable, SMA interface * 1, Internal *1)
3 antenna for Cellular and GPS (detachable, 50¦¸ SMA female interface), Cellular support diversity receiving (MIMO) option
Led
SYS*1, VPN*1, Signal*1, Cell*1, WAN*1, LAN*1, WiFi*1
Button: Reset
Console: 1 console port
Serial port: RS232 or RS485 built-in terminal block interface
IO Port: 2
Configuration Interface: Web/Telnet/CLI, support remote management
At command: support
UIM/SIM Card Slot: Support 1.8V/3V UIM/SIM
DC Jack:
Two types of input jack for DC
2.5mm DC jack * 1
Terminal Block * 1
Power supply:
DC5V-50V, typical DC 9V1A or 12V1A, 12v CAR USE; DC5V~40V is the default, DC5V~50V is the option;
Power consumption
Idle: 22mA@12VDC
Max: 208mA@12VDC
Average:125mA@12VDC
OS
Windows 8, 7, Vista, XP, 2000
Mac OS
Linux
Other OS support internet browser
Physical
Operating Temperature:
Work temperature: -30¡ãC to 70¡ãC option for -30¡ãC to 80¡ãC
Storage temperature: -40¡ãC to 85¡ãC
Humidity: 95% Maximum (Non-condensing)
