Original, Like a New/Excellent Working Condition, all Tested. it's separated from New equipment. Surface Condition(Dimpes/Embossing) : Excellent (Never used : It is the same as the Original New Condition ).
Realization of optimal environment
Alternative for Metal Halide Lamp 175W, 250WAlternative for High voltage mercury lamp 300WUsed for factory, industrial site, canopy, etc.Maintain the uniformity of brightness at the height of 12MVarious light distribution angles : 55, 110
High efficiency ¡¤ High feasibility
52% cost reduction against metal high ceiling lampHeatproof system for long service life. The system considering waterproof, dustproof, fallout aspects, etc.
Reduce the cost of maintenance . By low power and high efficiencyLong service life: max. 50,000 hr.
Differentiated design and safety
Eco-friendly lighting product with no harmful substance to respond to RoHSSlim & Simple design (design application).
Installation type of Bracket with safe structureRealization of light-weight less than 6Kg.
We have an extensive stock of surplus parts and 2nd source parts, largely for AMAT, Centura, Endura, HDP Ultima Plus, Novellus, LAM, Mattson, TEL Parts, IMP Parts, etc.
This stock changes regularly as we gain excess items from our many equipment refurbishment projects.
Only defects that cannot be refurbished are defects on the puck, like, cracks and fractures of ceramic parts. There are heat wires inside the ceramic puck and if the puck is broken, it is very probable that heat wires are damaged, which cannot be repaired.
In case of all Mca e-chuck, Mca heater, ESC, ALN Heater, Magnet Assy, products used in PVD manufacturing process, we offer a various services of refurbishment that are conducted by our own engineers and in-house. Or if customers ask, we provide new one.
The Ceramic Heater is ideal for spot heating or area heating of remote locations, farm buildings, shops, service areas, pump houses or other hard-to-heat spaces, providing both fuel efficiency of radiant heat and installation flexibility not recommended for car washes.
This is a Millivolt Standing Pilot heater and does not require an external power or electricity to operate, so it's great for use during power outages. Requires Millivolt thermostat for SGM sold separately. May require the following second stage regulators prior to the heater based on gas supply pressure
Ceramic heater are widely used in pre-heating of plastic sheets for vacuum forming & thermoforming, drying paints, lacquer & varnish curing, drying printing inks, drying textiles, activating adhesives, removing surface water from objects or moisture removal from fabric and paper, animal husbandry and rearing.The ceramic IR heaters are highly efficient.Ceramic infrared heater offers precise targeting and control with minimal peripheral heat. It is possible to apply heat only where and when it is required.
MCA ESC is a key consumable part of the PVD equipment used in the deposition process in the semiconductor manufacturing process that should be replaced regularly due to high temperature/ high pressure conditions and quality problems because of impurities in the chamber.
Roller Hearth Kiln is a furnace that loads the product on the roller and make continuous production. It is used in various processes, including plastic working, firing, drying and degreasing, for a variety of production.
It is designed to implement continuity of automated production system and show excellence in speed variation by roller running per zone and rapid heat-up capability.
Pusher Furnace, a representative equipment in the firing process, is designed to push the conveyor using the pusher to move the product. It is used for the firing process of various types of products and it shows excellent heat resistance, insulation efficiency and wear resistance against the conveyor. Designed as a tunnel type, Pusher Furnace implements continuity of automated production system and uniform production based on ambient per zone and temperature control.
Batch Type Furnace can be comprised of several types, such as rack, roller or elevator, and pre-process product input and post-process product output is made in 1 cycle.
Batch Furnace is used for plastic working, firing, drying and degreasing of various products.
Unlike the continuous furnace, it can be installed in an independent location, with advantages of convenient layout and excellent price competitiveness.
Magnet Assy is located behind target, activated electronic motion in the plasma that improved efficiency by improving the uniformity of the deposition. Cathode role of the target material (Ti, Al, W, Ta, Cu, etc.) to be deposited on a substrate, pulls the Arion in plasma.
- Magnet assemblies are made up of steel parts and a ceramic magnet, bonded together with epoxy.
- Max pull is tested on a ½� thick and flat machined steel plate. But the actual pull should be much smaller if your steel is thinner, rough, rusty, coated or not very flat. For any critical applications, three-time safety factor is strongly recommended.
- Besides standard models listed bellow, we can make assemblies based on custom designs.
- Applications include magnetic holding, lifting, antenna mounting, positioning, retrieving and more.
Faster drying lead time with High-Performance Heaters and our proprietary Dual Torque Converter reduce the overall
lead time by grinding food waste with a powerful force.
Product nameAuto fan Insect Control Sprayer (new)
ModelSOL-Power300-2
Standard75 A Body-Auto
Motor 2.2 (kw)
Autofan 0.75 (kw) x one each
Tank 400 (L)
Frost-Proof Control Box System
Weight 120 (kg)
Dimension70 cm (L) x 110 cm (W) x 150 cm (H)
ApplicationPest control sprayer for foot and mouth disease prevention, emergency disease prevention, facility houses, barns, etc.
FeaturesWalk-carrier, fan and moveable type are integrated for easy installation; available for all year round
Product name75A Motor Mounted Spray Cart
ModelSOL-AM103-4
Standard 75ABody-Auto
Motor2.2 (kW)
High-pressure hose 10 x 200M
Walk-Carrier
Dimension100 mm (L) x 50 mm (W) x 110 mm (H)
Application Used for pest control
in the barns, washing, forest-fire
fighting, pesicides spraying, and
fruits peeling
MaterialSteel square circular pipe and square pipe /high- pressure Hose with 100 kg/cm2 rupture pressure, 75A autopowered sprayer, motor ac 220 V, 3hp, Fixed wheel
FeaturesMotor driven sprayer, injection with 20~30kg/cm2 pressure by adjusting autopressue control valve
Appearance A high-pressure sprayer, a motor, and high- pressure hose integrated equipment with wheels
75A Engine Set
ModelSOL-E810-5
Standard Four-cycle Gasoline Engine-
Key Start-Up 4.8(KW)
75 A Body-Auto
High Pressure Hose(10 x 200M)
Tank 400 (L)
Dimension 110cm (L) x 45cm (W) x 70cm (H)
Weight60(kg)
Application Used for pest control over the entrances of barns, floor- cleaning, forest-fire fighting, pine xylophilus control, pesticides spraying, peeing
MaterialSteel circular pipe and square pipe,high-pressure hose, 100 kg/cm2 rupture pressure
FeaturesGasoline powered engine 75 A sprayer integra- ted equipment, pressurized injection, pressure controller
Product nameFour Seasons Unattended Pest Control Sprayer for Vehicles (New)
ModelSOL-A1004-2
StandardMachine Room with Thermal
Insulation Panel
Sensor Control Box
Motor 2.2 (kw)
Built-in hot wire U Type Nozzle 1SET
Windbreak *two each
Tank 400 (L) 75 A Body-Auto two sets
DimensionBody : 1000 x 1200 x 1500
Windbreak : 1100 x 1800(2SET)
(L x W x H)(cm)
Weight110(kg)
FeaturesAvailable all year round under the condition of temperature from 0 to -20¡ÆC due to the frost-proof equipment Water tank temperature is always maintained above 30¡ÆC by specially designed machine room device Clogging due to waste of nozzles and freezing is completely removed by the powerful automatic generation of water Moveable machine room can be installed anywhere users want
Product nameAuto Sensor Fan Insect Control Sprayer (new)
ModelSOL-Power300-3
Standard75 A Body-Auto
Autofan for Spraying two each
Frost-Proof Control Box System
Tank 400 (L)
Four-cycle Key Start-Up Engine 4.8 (kw)
Hose Reel Set- 10 x 100(M)
Dimension70 cm (L) x 110 cm (W) x 150 cm (H)
Eco-friendly Nonpollution Compressed Insect Control Sprayer
ModelSOL-B1004-2
StandardStainless Steel Tank 70(L)
Auto Adjustable Air Compressor
Remote Control Carrier (operation for four to six hours per charge)
Spray Method: dc 12 (V) / 90 (AH)
Air-Compressed
Dimension110 x 45 x 70 (L x W x H)(cm)
ISO 9001 : 2008 (Q329711)
Intererson Steriliser (existing)
ModelSOL-COCOFAN
Standard Sandwich Panel
Stainless Steel
Compressor (220 V)
Autosensor
Thermostatic Heater
Dimension 1200 x 1100 x 2300
(L x W x H)(cm)
Weight95(kg)
Features The interpersonal sterilizer blocks
pathogens and harmful bacteria
carried by the clothes, hats,
shoes, etc., of visitors
EffectsIt provides sanitary and
safe environment as well as
the image of cleanness by
blocking pathogens
carried by visitors and workers
ApplicationFarms, businesses,
government offices, government
agencies, multi-ue facility.
Kindergartens, schools, various
institutes, hospitals, and other
sanitary requirements
Product name75A Engine Mounted Spray Carrier
ModelSOL-AE117-4
Standard Four-cycle Gasoline Engine
Key Start-Up 4.8 (kW)
75ABody-Auto
High-Pressure Hose(10 x 100M)
Tank 200 (L)
Dimension 1200cm x 1000cm (W) x 1300cm (H)
Weight115(kg)
Application Used for forest-fire fighting, sterilizing barns, facility houses, government offices, and floor cleaning
MaterialSteel square pipe, antirust painting treatment, FRP tank
FeaturesA tank and a high-pressure sprayer integrated equipment and moveable type
Fixed front wheel 12 rear wheels-powered sprayer mounted with autopressure controller, eight pieces of rotating bearings, Keyang 710 Key
Start-Up engine, FRP tank
Towed trailersSOL- GAMMA 400 SET
Size(L x W x H) (mm) BODY3600 x 1800 x 550
Load Weight (kg)3500
Pump flow(L/min)0~300
Pump pressure (bar)0~25
Suction diameter(mm)65
Discharge diameter (mm)40~65
Power (H.P)23, 4 stroke aircooled 4cycle
Pump set size(L x W x H)(mm)800 x 1100 x 950
Pump set Weight (kg)110
Manual hosereel10(mm) x 100(m)
Water tank (L)3000
Water tank Size (L x W x H) (mm)(2000)
1420 x 1490 x 1250(1000)
1100 x 1300 x 960
Aerial lift size (L x W x H) (mm)1000 x 800 x 1500
Lift hight size Hi(mm) x Low(mm)Hi (1000) x Low (500)
Nozzle Spray Maximum(m)Middle (m)
Lowest (m)
Middle (m)
Lowest (m)
Spray nozzle away0~35
ISO 9001 : 2008 (Q329711), ISO - 14001 , ABS, NEP, CE,
TS16940
Plunger type: 3-plunger type
Dimension(l x w x h) mm: 400 x 270 x 410
Weight kg: 21
Plunger size mm: 26 x 30
Diameter of v-pulley mm: 254(b-2)
Lubricantion oil capacity l: 0.9
Rpm continuous rpm: 800
Max rpm: 1300
Pressure continuous kg/cm2: 25
Max kg/cm2: 35
Discharge capacity continuous l/min: 38
Max l/min: 62
Power continuous p.S: 3.5
Max p.S: 1.5
Tank cap acity l l
Iso-14001, iso9001:2000
using undiluted solution.
Very stable and quick effect occures when undiluted solution sprayed.
The product is very light in weight wise so it can be used anywhere with less labor.
ISO 9001 : 2008 (Q329711)
High performance high pressure Sprayer does a to and fro motion 900 times in a minute.
It has to eb added oil and greek to prevent the heat.
non-greek ceramic sprayer blocks the impurities mixed with the original one.
All are Basic features.
When using the remote control, only use the wind/stop button.
when manually operated, only use the wind/stop button
The company obtained the patent for its no clutch power transmission.
4 cycle gasolin use, less noise and vibration, none polution, can be used in sealed room.
light weight because of Chemical tank and all in one.
Strong suction force.
The chemical is not supplied to coil for the coil component life increased. It supplies through "The Chemicals supply pipe" into "the bundled discharge", in order to avoid to combustion in the Coil inside.
