Akfix G400 is a two component marble and natural stone adhesive based on polyester resin.
Resistant to UV
Resistant to alkalis and diluted acid solutions
Temperature resistance of cured adhesive is between -10 C and +100 C
Bonded surfaces are ready to be used after 2 hours
No color change, cracking or shrinkage during hardening period
An adhesive set which consists of high viscosity cyanoacrylate adhesive and activator.
High bonding strength.
Suitable for use on vertical surfaces as it will not drip or slump.
It is particularly suited to bonding difficult substrates which have a porous or uneven nature since it increases bonding strength by preventing the adhesive to be absorbed by the surface.
One-component, fast curing liquid polyurethane adhesive. It possesses high water resistance and bonding strength.
Fast curing.
Low press time.
Transparent.
Extremely high bond strength on numerous substrates.
Conforms to D4 according to DIN EN 204.
Easy to use.
Very good resistance to chemicals.
Excellent resistance to moisture and weather conditions.
Nonshrinking.
Low odour.
Useable in slightly wet substrates.
PVA glue iAdPro 1051 is best used for cardboard, light wood, paper, and other such materials. It does form a strong bond, it dries quite quickly and remains flexible once dry.
The multipurpose high polymer modified thin-set adhesive offering vast application for interior & exterior areas . It is comentitious power to be mix only with water to install various types of medium & large format tiles & stone on variety of substrates using thin-set compliance.
The double wall semi-rigid heat shrinkable end is composed of semi-rigid polyolefin and hot melt adhesive. The outer layer is radiation crosslinked polyolefin and the inner layer is hot melt adhesive. One end of the product has been pre contracted and sealed, which has double effects of insulation and sealing. It is used for mechanical protection, sealing, waterproof and moisture-proof and environmental protection of power cables, wires and harness ends.
Product features
shrinkage temperature: 80
 Final shrinkage temperature: 125
 Service temperature - 45 ~ 110
Heat shrinkable ratio: 4:1
Standard color: Black
Voltage class: medium and low voltage power cable (35kV and below)
Purpose: radiation crosslinking heat shrinkable sealing cap is suitable for the end waterproof, insulation and protection treatment of power cable or communication cable. The mouth end is coated with high-performance hot-melt adhesive. When heated, the sealing cap can shrink, and the glue melts. It is tightly bonded to the surface of the cable, playing an excellent waterproof, insulation and protection effect.
Hotmelt adhesives are one of the most important raw materials when making a diaper or sanitary napkins. The correct adhesive will increase machine performance and end-product quality.
We may supply: Construction, Elastics, Positioning, and Wetness Indicator Adhesives.
Description
VOG is one component, premixed, modified polymer cement based tile adhesive
used for bonding ceramic tile on the surfaces of wall, ground and floor. It is easily applied and can achieve an excellent adhesion.
Where to use:
- For wall surface: To bond ceramic tile (maximum is 60X60cm) on the concrete or cement sand rendering.
- For floor and ground: To bond ceramic tile or building stone.
Advantages
- Stable performance, use directly after mix it with water;
- Good flexibility
- Nontoxic, non-radiant, no irritative odor;
Application
Surface Preparation:
- The surface should be vertical, flat, smooth and free of dust, grease and other contaminants.
Mixing
Add clean water to suitable mixing bucket. Mix slowly and continuously to form a homogeneous mixture
- VOG 25kg barrel required approximately 5 - 6,0 litres of clean water
- VOG 5kg barrel required approximately 1 - 1,2 litres of clean water
The mixed materials is immediately ready to use and should be used within 25-30 minutes after mixing.
Storage Conditions: Keep in cool and dry places
Packaging: 25kg/barrel and 5kg/ barrel
SHELF LIFE: 09 months
Hightit line of UV light cure adhesives for disposable medical equipments instantly cure under UV light. They will become shock resistance, heat-resistant flexible films. They can bond a variety of substrates, such as PVC, polycarbonate, ABS, acrylic, polyether ketone, polystyrene, nylon, polyimide, glass, metal. They are widely used in medical device industry.
our glue pass the ISO10993 medical grade certification.
As a polymer viscoelasticity admixture in construction additives,SLEO VAE Redispersible Polymer Powder is a water dispersible vinyl acetate / ethylene copolymer powder with anti saponification properties. Because of its relatively high ethylene content, latex powder has excellent flexibility.
It improves the important application properties of dry mortars, like longer opening time, better adhesion with difficult substrates, lower water consumption, better abrasion and impact resistance
* Convenient for all drywall joint repairing, filing and finishing works
* Easier to apply and sand due to less weight (up to 25%)
* Minimizes coats over corner bead thanks to less shrinkage
* Net weight: 17L
* Color: white powder
* Drying time: 12-24 hours
Water-resistant cement-based tile adhesive for fixing ceramic glazed tiles for both floors and walls for internal applications. It can also be used for external areas or fixing homogenous vitrified tiles, glass mosaic and natural stones when mixed with CMI Mortar Admix 380.
USES:
Fixing of ceramic tiles, glass mosaic, stones onto concrete slab, screed / render, RC walls, blockwall. For other areas not specified, please consult CMI Technical Representatives for more information.
