Supplier : Polyurethane pu foams, sealants mastics
waterproofing membranes, industrial adhesives, glues, technical aerosols
anaerobics
polyurea systems
rigid polyurethane pu spray foam
systems
surface preparation and repair systems
epoxy primers and floorings
Established: 2001
Standards: CE, ISO9001, REACH, IFT, TEBAR, DIN
Thermcoat Thermal & Acoustic Insulation Pu Spray Foam (Gun Use)
A PU Foam for top quality heat and sound insulation at buildings and houses. Provides a unique, monolithic thermal insulation application without junctures, seams and gaps. An innovative alternative to traditional building insulation methods such as polystyrene heat insulation boards, glass wool and rock wool. Single-component product used with an applicator gun. It does not contain any propellant gases which are harmful to the ozone layer.
Excellent adhesion to all kind of building materials,
Can be applied easily to uneven, hard to reach surfaces where it is not possible to use traditional insulation materials,
Excellent thermal insulation value (0.025 W/(m.K),
Elimination of thermal bridges,
Elimination of the dew point,
Yield up to 3meter with 1.5cm thickness for one layer if applied from a distance of ~40cm with normal application speed,
No need to use mechanical fastening elements after use,
Over paintable,
Akfix 805 is a single-component, moisture-curing and self-expanding aerosol polyurethane foam. It is designed for easy dispensing through the straw adapter included with each can. It does not contain any propellant gases that are harmful to the ozone layer.
Excellent adhesion & filling capacity and high thermal & acoustical insulation value.
Excellent mounting capacity and stability.
Adheres to almost all building materials with the exception of surfaces such as polyethylene, Teflon, silicone and surfaces contaminated with oils and greases, mold release agents and similar materials.
Mould-proof, water-proof, over paintable.
Cured foam dries rigid and can be trimmed, shaped and sanded.
Polyurethane Windshield Adhesive is a component, moisture curing polyurethane based adhesive for direct glazing in Automotive Glass Replacement.
One component formulation
Good non-sag properties
Short cut-off string
Cold application
Fast curing â?? Rapid strength development
High mechanical performance
High Modulus
High initial bond strength
Can be overpainted
Akfix G400 is a two component marble and natural stone adhesive based on polyester resin.
Resistant to UV
Resistant to alkalis and diluted acid solutions
Temperature resistance of cured adhesive is between -10 C and +100 C
Bonded surfaces are ready to be used after 2 hours
No color change, cracking or shrinkage during hardening period
An adhesive set which consists of high viscosity cyanoacrylate adhesive and activator.
High bonding strength.
Suitable for use on vertical surfaces as it will not drip or slump.
It is particularly suited to bonding difficult substrates which have a porous or uneven nature since it increases bonding strength by preventing the adhesive to be absorbed by the surface.
One-component, fast curing liquid polyurethane adhesive. It possesses high water resistance and bonding strength.
Fast curing.
Low press time.
Transparent.
Extremely high bond strength on numerous substrates.
Conforms to D4 according to DIN EN 204.
Easy to use.
Very good resistance to chemicals.
Excellent resistance to moisture and weather conditions.
Nonshrinking.
Low odour.
Useable in slightly wet substrates.
Spray Paint
Designed for numerous application possibilities. Special spray system, which is even used by famous graffiti artists. Available in a broad range of the bestselling colours, mainly matching to RAL.
High-grade nitro-combi quality.
Very good coverage.
Excellent adhesion on many surfaces.
Good flow, smooth surface.
Quickdrying.
Suitable for indoor and outdoor applications.
The surface is polishable.
Weather-resistant, light-proof, UV-resistant.
Scratch-, shock- and impact-resistant.
Quick-drying (The drying time depends on surrounding temperature, air humidity and thickness of the applied coat).
AS606 is one-component acrylic emulsion based sealant reinforced with silicone emulsion. It has superior adhesion and good elasticity.
Sealing of low movement joints between various construction materials(wood, concrete, brick etc.)
Sealing joints between windows, walls, doors etc.
Filling cracks in walls and on ceilings.
100E Universal Silicone Sealant
100E is an one-component acetoxy cure silicone sealant for a range of general sealing and glazing applications. It provides a strong adhesion and suitable for use on common non-porous building materials.
Stays permenantly elastic after curing.
Remains flexible in low and high temperatures.
Resistant to temperature exteremes.
Resistance to aging, cracking and discoloring.
905N a neutral cure, premium performance silicone sealant designed for gap filling and sealing in a wide range of use in building and construction. It combines the advantages of outstanding adhesion to building materials and non-corrosive and odorless
100% solventless silicone.
Excellent weatherproof and UV resistant.
No Cracking or Shrinking,Water resistant.
Very low odor and noncorrosive.
Excellent flexibility and adhesion to numerous porous and non-porous.
Substrates for large scale construction and glazing applications.
Resistant to temperature extremes (-60 C to +180 C)
Fast curing, low modulus, high elasticity.
High viscosity non slump formula.
