Powering your journey with efficiency and reliability. Our premium diesel fuel is designed to optimize engine performance while minimizing emissions. With a blend engineered for maximum power output and fuel efficiency, it\'s the smart choice for drivers seeking both performance and environmental responsibility. Whether you\'re hitting the highway or navigating city streets, trust our diesel to keep your engine running smoothly mile after mile.
Vessel loaded with EN 590 10 ppm 100,000 MT diesel en route Singapore ETA end March 2026.
STS Operation in Singapore, no upfront payment, no re-routing fees, no deposit, buyer to submit CPA for approval by seller prior to ATB, please act fast before prices go up.
Table Top Meeting (Ttm) & Physical Verification Jurong, Rotterdam,
Singapore, Fujairah, Qingdao, Houston
1. Buyer Submission Of ICPO & CIS:
The Buyer Submits An Irrevocable Corporate Purchase Order
(ICPO) And Customer Information Sheet (cis) Addressed To The Seller.
The Submission Must Include:
Buyer's Passport Data Page
Details Of An Individual Who Will Attend The Ttm And Product
Verification.
2. Seller Issues A Commercial Invoice (CI):
The Seller Provides A Commercial Invoice (ci) To The Buyer,
Which The Buyer Must Sign And Return.
Along With The Invoice, The Seller Will Provide:
Passport Product Data Page
Certificate Of Origin
Commitment To Supply
Tank Storage Receipt Tsr
Issuance Of Service Fee Invoice And Terminal Access
Authorization - Which Include: NON-Ground Terminal Inspection Fees (AMSPEC
OR SGS) Terminal Digital Access Control Card Port/harbor
Oxidation/contamination Control Unit Fees (EPA Compliance) Handling And
Logistics Charges
3. Table Top Meeting (ttm) & Physical Verification:
The Seller Schedules A Ttm In Allocation Port With The Buyer
And Their Team.
During This Meeting, The Physical Verification Of The Product
Takes Place.
4. Proof Of Product (pop) & Initial Payment:
After Ttm And Verification, The Seller Presents A Fresh SGS
Inspection Report To The Buyer.
The Buyer Then Remits 10% Of The Product Value To The Sellers
Account.
In Return, The Seller Provides:
SGS Inspection Report
Title Ownership Of The Product
5. Injection & Delivery:
The Buyer Begins Injection Of The Product Into Their Designated
Storage Tank Or Vessel.
6. Commission Payment:
The Seller Pays Commissions To All Involved Intermediaries
According To The Non-circumvention, Non-disclosure Agreement (NCNDA) Terms.
Refinery offer EN590 diesel CIF with Escrow/Fiduciary account payment:
Seller / Buyer Financial Commitment * The Buyer Physically Visits The Seller's *Escrow/fiduciary Office* In **United Arab Emirates,Indonesia, China OR Rotterdam
** * The Buyer Deposits A
5% Financial Guarantee* Into The Seller's Escrow/fiduciary Account
To Cover The First Or Annual Shipment As A Performance Guarantee.
The Seller Issues A Corresponding *5% Performance Bond* INTO The Same Escrow/fiduciary
Account.
Failure By The Seller To Issue The 5% Performance Bond Within The Contractually Agreed Timeframe Constitutes A Breach, And The Seller Shall Pay An
Aagreed Security Guarantee Fee*
To The Buyer As A Penalty
725 Fuel Energy Resources Suppliers
Short on time? Let Fuel Energy Resources sellers contact you.
EN590 CIF Price is $430/MT including $5 to buyers side.
**Transaction Procedure (CIF) ESCROW/Fiduciary**
### STEP 1: Buyer Initiates The Process
* The Buyer Issues An **Irrevocable Corporate Purchase ORDER (ICPO)** Upon Receipt And
Acceptance Of The Seller's
**Soft Corporate Offer (SCO)
** Issued By The Seller Or Seller's
Authorized Representative.
### STEP 2: Contract Agreement
* The Seller Issues A
**Draft Sales And Purchase Agreement (SPA)
** To The Buyer.
* The Buyer Reviews, Signs, And Returns The Executed Spa To The Seller.
### STEP 3: Pre-shipment Documentation * The Buyer And Seller Mutually Agree On The
**Final Discharge Destination** For The First
Shipment.
* The Seller Provides **partial Proof Of Product (POP) ** Documents, Including:
* Refinery Commitment To Supply
* Certificate Of Origin
* Seller's Certificate Of Incorporation
* Product Passport (quality & Quantity Report)
* Statement Of Product Availability
### STEP 4: Seller / Buyer Financial Commitment * The Buyer Physically Visits The Seller's **ESCROW/Fiduciary Office** In **united Arab Emirates,
Indonesia, China Or Rotterdam** * The Buyer Deposits A **5% Financial Guarantee** Into The Seller's Escrow/fiduciary Account
To Cover The First Or Annual Shipment As A Performance Guarantee.
* The Seller Issues A Corresponding **5% Performance Bond
** Into The Same ESCROW/FIDUCIARY
Account.
* Failure By The Seller To Issue The 5% Performance Bond Within The Contractually Agreed Timeframe Constitutes A Breach, And The Seller Shall Pay An **agreed Security Guarantee Fee**
To The Buyer As A Penalty.
### STEP 5: Full Pop Release & Title Transfer
* Within **48 Hours** Of Confirmation Of Both Buyer's And Seller's Deposits, The Seller Releases
**Full Proof Of Product (pop) ** Documents, Including:
* Ship Certificates
* Cargo Declaration
* Fresh Quality & Quantity (q&q) Report
* Charter Party Agreement
* Ownership Certificate
* Title Transfer Affidavit
* Product Allocation Certificate
* Ullage Report
* Notice Of Readiness (NOR)
* Customs Declaration Certificate
* Bill Of Lading
* Vessel Q88
### STEP 6: Shipping & Payment Terms
***NCNDA / IMFPA (Non-circumvention, Non-disclosure & Fee Protection Agreement) ** Is Executed By All Parties Involved.
* Cargo Is Fully Insured, And Shipment Commences In Accordance With The Spa.
* Upon Vessel Arrival At The Destination Port, The Buyer Conducts **CIQ Inspection** To Verify Quality And Quantity.
* Within **48 Hours Of Vessel Arrival**
, The Buyer Releases **Full Payment Via Mt103**
Deducting Any Previously Paid Expenses.
### Step 7: Payment To Intermediaries
* The Seller Pays All Intermediaries Involved In The Transaction In Accordance With The Executed **IMFPA**.
EN590 10ppm diesel available:
PG Non-Negotiable Tank-to-vessel - FOB - Rotterdam, Houston, Jurong, Qingdao, Ningbo, Fujairah
1. Buyer's Initial Submission
Buyer Submits Icpo (Irrevocable Corporate Purchase Order) AND CPA (Charter
Party Agreement) After Receiving The Seller's Soft Corporate Offer (SCO).
2. Seller Issues Commercial Invoice (CI)
Seller Provides A Commercial Invoice (CI).
Buyer Signs And Returns The Ci, Along With A Signed IMFPA/NCNDA (Irrevocable
Master Fee Protection Agreement / NON-Circumvention, Non-disclosure Agreement).
3. Seller Issues Dip Test Authorization (DTA)
Seller Provides A Dip Test Authorization (DTA).
Buyer And Buyer's Vessel Operator (or Ttvia) Must Endorse The DTA.
4. Seller Releases Proof Of Product (pop) Documents
Within Three (3) Days Of Receiving The Endorsed DTA, The Seller Provides:
Tank Storage Receipt (TSR) With Full Terminal DETAILS, Barcode & GPS
Injection Report
Fresh SGS Report (Issued Within The Last 48 Hours)
Unconditional DTA In The Buyer's Name
Authorization To Verify (ATV)
Authorization To Sell & Collect Funds (ATSC)
Commitment To Supply (CTS)
Product Passport & Analytical Report (PP)
Attestation Of Allocation (AOA)
Legalized Commercial Invoice
5. Buyer Verifies Pop & Conducts Dip Test
Buyer Verifies And Confirms The Proof Of Product (POP) Documents.
Buyer Orders Sgs Inspection For A Dip Test In The Seller's Tanks.
6. Seller Issues Full Injection Schedule
Upon Successful Dip Test, Seller Provides The Full Injection Schedule To The Buyer.
7. Buyer Makes Payment
Buyer Pays The Total Product Cost Via MT103 Within 48 Hours After A Successful DIP Test.
IF Payment Is Delayed, the buyer covers the daily tank storage extension costs.
8. Seller Transfers Ownership & Export Documents
Upon Payment Confirmation, Seller Transfers THE Title Of Ownership Certificate
And All Export Documentation To The Buyer.
9. Intermediary Payments
Seller Pays All Intermediaries Involved In The Transaction.
10. Long-term Contract Agreement
Seller And Buyer Sign A One-year Supply Contract For Continued Shipments.
Harnessing the energy of the earth. Our high-quality coal is a reliable source of power, heating, and industrial use. Mined with precision and processed for optimal performance, it delivers consistent heat output and long-lasting burn times. Whether for electricity generation, steel production, or residential heating, our coal provides the energy you need with efficiency and dependability.
Vessels for TTO/STS EN590 available on regular basis
TERMS OF NEGOTIATION
INCOTERMS: TTO/STS
ORIGIN: EUROPEAN
INSPECTION: SGS, IQS,CIQ OR SIMILAR
INSURANCE: PAID BY SELLER, COVERING 110% OF SHIPMENT VALUE
ACCEPTABLE PAYMENT TERM: MT103/TT WIRE/USDT
COMMODITIES:
DIESEL FUEL EN590 USLD-10PPM/50PPM/500PPM GASOLINE
MINIMUM QUANTITY: 50,000 MT per Month
MAXIMUM QUANTITY: 400,000 MT Per Month
TTO/STS PRICE: USD $470 PER MT GROSS / USD 460 PER MT Net
NON-NEGOTIABLE TITLE/TANKER TAKE OVER PROCEDURE (TTO)/ SHIP
TO SHIP (STS)
1.The Buyer shall issue an Irrevocable Corporate Purchase Order (ICPO),
accompanied by the company's registration certificate and a Guarantee Letter confirming its intention to assume legal title of the product.
2.The Seller shall prepare and submit a draft Memorandum of Understanding
(MOU) to the Buyer. The Buyer shall review, countersign, and return the
executed MOU to the Seller.
3. Upon receipt of the countersigned MOU, the Seller shall provide the Buyer
with the following documentation for verification and confirmation:
A. Vessel Declaration
B. Bill of Lading
C. Loadline Report (Ullage Report)
D. Q&Q Analysis Report at Loading Port
E. Payment Invoice for Title Transfer Approval
F. Cargo Manifest
4. Upon verifying that the submitted documents, Buyer shall proceed to remit
the statutory governmental fee for Ttitle Transfer Approval in the amount of 95,000 via T/T wire transfer within two (2) international banking days. This
amount shall be deducted from the final purchase price.
5. If vessel rerouting is required, Buyer shall authorize the shipping company to
redirect the vessel to the Buyer's preferred port of discharge. The Seller shall
complete the transfer of product title to the Buyer through the relevant
governmental authority and shall issue the following documents to the Buyer:
Freshly dated Dip-Test Authorization (DTA)
Authority to Board (ATB)
Authority to Verify (ATV)
The Buyer shall then appoint SGS or an equivalent inspection agency to carry out the Q&Q analysis.
6. Upon successful completion of the dip test and once the vessel/tanker is
securely moored at the designated dock, the Buyer shall remit the remaining
balance of the purchase price via MT103 wire transfer. Following confirmation
of payment, the Seller shall issue the official Certificate of Ownership to the
Buyer, thereby finalizing the legal transfer of title. Trans-loading shall begin
immediately thereafter.
7. Trans-loading operations shall commence without delay upon confirmation of payment and title transfer.
8. The Seller shall release commissions and any agreed payments to intermediaries involved in the transaction within forty-eight (48) hours of receipt of full payment from the Buyer's bank.
7. Trans-loading commence immediately.
8. Seller will release payments to the intermediaries involved within 48 hours of receiving the Payment for the product from the Buyer's bank.
EN590 FOB TTV Seller Procedure
Origin : Kazakhstan
Loading port: Singapore port
UNIT PRICE : USD 490/MT
PAYMENT TERMS : MT103
TRANSACTION TERM : FOB
1. Buyer accepts seller working procedure and issue ICPO
2. Seller's issues commercial invoice (CI), Buyer signs and returns back commercial invoice.
3. Seller issue TSR with GPS coordinate to Buyer Company,
4. Buyer contacts the Seller's storage facility for tank extension to enable Buyer approval to gain access to the facility and execute the Quality & Quantity Inspection in Seller Tank Farm for FRESH Analytical Report/Result by SGS. ( Note* One day extension fee is 78,000 usd and will be deduct when buyer is paying total amount )
5. After successful DIP test, (NCNDA/IMFPA) will be signed by all parties.
6. Seller injects product into Buyer's vessel or injects into Buyer's tanks Buyer or buyer take over the storage tanks, within maximum 48 hours Buyer pays via MT 103/TT for the spot transaction and seller issues all export documents to buyer.
7. Upon conclusion of first lift transaction seller pays all intermediaries involved in the Transaction and proceeds with the signing of contract with Buyer.
En590 10ppm Diesel
Vopak-to-vopak Procedure:
1- Buyer Sends Cis + Cp
2- Conference Call /meeting Between Buyer & Seller Where Both The Parties Exchanges
Vopak Tank Coordinates
3- Seller Release Ci, Buyer Counter Signs
4- Seller Releases Full Pop With Fresh Sgs Report
5- Buyer Makes Full Payment Via Mt 103
6- Seller Transfers Title To Buyer
7- Buyer Pays Commission To Intermediaries
8- Seller Issues Spa Contract For 12 Months
Platts {-} Minus 50 U$d Nwe And U$d 10.00 Commission Payable By The Buyer. Hence Net Cost To
The Buyer Will Be Nwe Platts {-} Minus 40 U$d
Product: En590-10ppm
Quantity: 100,000 Mt
Availability: Fob Rotterdam {vopak Tank/s}
Monthly Deliveries In Annual Contract
Conditions: Ncnda { Attached} And Intermediary Services CONTRACT {ATTACHED} will be signed
by the Buyer once their CIS + CP is accepted by the Seller.
EN590 10ppm ULSD Diesel available. Vessel to Tank transaction in Jurong port Singapore.No upfront payment.
VTT price $460/MT including $10 commission to buyer's side.
1. Buyer send ICPO with TSA
2. Seller issue CI
3. Seller sends to Buyer the following documents for Buyer's confirmation.
A. Q88
B. Bill of Lading
C. Estimated Time of Arrival E.TA.
D. Q&Q Analysis Report by IQS at loading Port.
E. Ullage/load line report
F. Cargo Manifest.
4. Buyer receives documents and sends Tank Storage Receipt for injection of
product to buyers tanks.
5. Seller injects products to buyers tanks and Buyer order SGS or Equivalent
inspection team for Q&Q inspection.
6. Upon the successful completion of Dip-test inspection, Buyer makes payment
by MT103 wire transfer for the total goods value, Seller transfers Title of ownership Certificate to buyer's name as the legitimate owner of the goods.
7. Seller will release payments to the intermediaries involved within 48 hours of receiving the Payment for the product from the Buyer's bank.
FOB TRANSACTION PROCEDURES
1. Buyer Issues ICPO, Company Registration Certificate and Tank Storage Agreement(TSA)for
seller approval.
2. Seller issues COMMERCIAL INVOICE (CI), STATEMENT OF PRODUCT AVAILABILITY, and
COMMITMENT to SUPPLY the available quantity in the Storage Tank and then program the
injection. THIS USUALLY DEPENDS ON THE LOCATION.
3. Buyer countersigns Commercial Invoice (CI) & Warning Letter with NCNDA/IMFPA signed
by all Buyer groups with commission structures.
4. Send the below proof of product (Documents) via email If Necessary.
Fresh SGS (Q&Q report) less than 48 hours.
Tank storage receipt. (TSR).
Authorization to verify (ATV).
Injection report Shore Tank (IR).
Certificate of Origin.
Product passport.
Authorization to Sell and collect (ATSC).
5. After the successful verification of the product existence, buyer order SGS to conduct their
Dip-Test in the seller tank on buyer expense and then issues buyer.
â?¢ Unconditional Dip Test Authorization (UDTA).
â?¢ ATSC authorization to Sell/Collect.
â?¢ Title of Ownership Certificate, (on seller expense).
6. Upon the successful dip test, Buyer presents their tank storage receipt (TSR), Seller issues
all export Documentation.
7. Buyer makes payment by MT103 or TT wire transfer for the total product and lifts the
product and seller pays all Intermediary involved on the transaction.
En590 procured from Russia, Kazakhstan, Turkmenistan, and other countries that are rich in unrefined oil resources.
We currently have access to reliable EN590 Diesel 10PPM supply and are looking to establish long-term cooperation with refineries, major fuel distributors, and large-volume suppliers.
TRANSACTION WORKING PROCEDURES CIF DELIVERY
1 Buyer issues Irrevocable Corporate Purchase Order (ICPO).
2. Seller issues SPA to Buyer. Within 48 hours Buyer signs seals and returns the SPA to seller.
3. Seller notarizes the contract, at its own expenses and submits Partial Proof of Product (via email) as follows:
A) Refinery Commitment to Supply
B) Product Passport
C) Certificate of Origin
D) Export license
E) Proforma invoice for the first month of value
f) Statement of Availability of Product
h) Company Registration
4. Within 5 banking days, Buyer's bank sends Irrevocable Operative SBLC via MT760 or DLC via MT700 according to seller's fiduciary bank
verbiage to seller nominated fiduciary offshore bank account for first month shipment,
5. Seller's Bank issues Full POP Documents to the Buyer's Bank alongside with 2% Performance Bond (PB 2%).
6. All parties finalized the signing of the NCNDA/IMFPA. The buyer will be invited by the seller to witness the loading of the product (At
Buyers Cost, Maximum of Five Personals/Representatives, Optional).
7. Seller clears vessels from the commercial's terminal (Loading Port), the buyer confirms shipping documents with ship master while
seller effects delivery to buyer destination
8. Upon the arrival of cargo at the discharge port, and after SGS/Q&Q at discharge port buyer's bank release to seller's bank payment by
TT/MT103 within 7 (Seven) banking days. Seller release payment to all intermediaries as per signed NCNDA IMFPA within 48 hours.
Excellent raw material for manufacturing of Activated carbon and coconut shell charcoal briquettes. We work with the farmers for the production of coconut shell charcoal.
