Find Verified Fly Ash Bricks Suppliers, Manufacturers and Wholesalers

Fly Ash Bricks :

We are manufacture of fly ash bricks. Our fly ash are best replacement of conventional red clay bricks and are 100% eco-friendly and does not create any sort of pollution during manufacturing process and can save up to 30%-40% of initial and overhead cost along with other advantages over burnt red clay bricks.

Currently we are manufacturing bricks of size 230/110/75 mm as per is standards and do guarantee the quality and finish of the bricks. Are certified by laboratory department of jadavpur university.

Fly Ash Brick Machine Power Pack

by-product sourced from fuel powered energy plants

Fly ash - Class F

Application Of Fly Ash

In as a supplementary cementitious material

Cement production PPC

In concrete as mineral admixture

As a partial replacement for cement in cement mortar

As fine aggregates

As a raw material in brick/Block Making

In roller compacted concrete

In soil stabilisation

In roads/pavements

AGRICULTURAL USE OF FLY-ASH

It is used as a soil modifier and enhances moisture retaining capacity of land.

FLY ASH AS FILL MATERIAL

As a landfill material

AS A ADSORBENT OF HEAVY METALS

It binds heavy metals to concrete

KEY BENEFITS IN CONCRETE

Reduced Water demand

Increased workability

Improve permeability

Improve durability

Low heat of hydration

Filler effect

Ball bearing effect

Pozzolonic reaction

Pore refinement

Pore blocking effect

Chemical effect

We are provide good quality of Ultrafine fly ash material with best rate Guru Corporation has strong position to supply Fly ash at different grades for different usages on a global scale.

Fly Ash generated from Power Plants.

Coal Fly Ash
CFA could be used in huge quantities in two areas: ash dyke construction and low-lying region filling [26,27,28]. In several affluent countries, CFA has been utilized successfully as a structural filler.

Fly ash is a finely divided residue made from the combustion of pulverized coal that can be used to increase concrete durability and workability, while reducing permeability.
fly ash has a wide variety of applications and uses, though it is primarily known for improving the durability and workability of concrete mixes. Fly ash is also a filler in paints, adhesives, and metal and plastic composites. It's commonly used as structural fill for road construction and fly ash can be used to make bricks, ceramic tiles, plaster, Portland cement, and ready-mix cement.

Fly Ash is a fine, powdery by-product generated during the combustion of pulverized coal in power plants. It is widely used as a supplementary cementitious material and in the production of cement, concrete, bricks, blocks, and other construction products.

Fly Ash ( Our Product ) & Grade is Class F or Class C

Price of product: To be discussed with the direct international customers.

Product origin: India

Key Specifications/Special Features: ASTM C 618

Minimum Order Size: 500 MT

Packaging details: 1.4 MT or 1.5 MT Jumbo Bags or Break Bulk

Advantages
Pozzolanic material suitable for cement and concrete applications
Helps improve workability and durability of concrete
Can reduce conventional cement consumption
Suitable for bricks, blocks and other construction products
Consistent fine-powder form for industrial processing
Useful for large-scale infrastructure and construction projects
Available for bulk domestic and export supply

Fly Ash:

Fly Ash is by product generated during combustion of coal, and comprises the fine particles that rise with the flue gases. Ash which is collected from the bottom is termed bottom ash. Fly ash is collected by electrostatic precipitators or other particle filtration equipment before the flue gases reach the chimneys of coal-fired power plants and together with bottom ash removed from the bottom of the furnace is in this case jointly known as coal ash. Depending upon the type of coal being used, the specification of Fly Ash varies considerably, but Fly Ash contains substantial amounts of silicon dioxide and calcium oxide (CaO), both being endemic ingredients in many coal-bearing rock strata. We are a reputed Fly Ash Exporter based in India and are supplying Fly Ash different cement, ready mix concrete, steel, refractories and construction industries.

The Major Utilization Areas Of Fly Ash :
- Manufacture of Portland Pozzolanic Cement & Performance improver in Ordinary Portland cement (OPC).
- Part replacement of OPC in cement concrete.
- High volume Fly Ash concrete.
- Roller Compacted Concrete used for dam & pavement construction.
- Manufacture of ash bricks and other building products.
- Construction of road embankments, structural fills, low lying area development.
- As a soil amender in agriculture and wasteland development.

Types of Fly Ash:
- According to the type of coal used fly is classified into two types. Anthracite and bituminous coal produces Fly Ash classified as class F. Class C Fly Ash is produced by burning lignite or sub-bituminous coal. Class C Fly Ash has self-cementing properties.

- Class F and Class C Fly Ash are products of the combustion of coal in large power plants. Fly Ash is collected in electrostatic precipitators or baghouses, and then transferred to large silos for shipment. When needed, Fly Ash is classified by precise particle size requirements, thus assuring a uniform, quality product.

- Class F Fly Ash is available in the largest quantities. Class F is generally low in lime, usually under 15 percent, and contains a greater combination of silica, alumina and iron (greater than 70 percent) than Class C Fly Ash.

- Class C Fly Ash normally comes from coals which may produce an ash with higher lime content generally more than 15 percent often as high as 30 percent. Elevated CaO may give Class C unique self-hardening characteristics.

Minimum Order Quantity : 1 container

Dry Class F Fly Ash powder from thermal power plants is a fine, pozzolanic material rich in silica, alumina, and iron oxide, with low calcium content. It is widely used in cement, concrete, bricks, and soil stabilization due to its strength-enhancing, eco-friendly, and cost-saving properties.

�?�°??? Product Overview
Origin: By-product of coal combustion in thermal power plants.

Collection: Captured dry from electrostatic precipitators (ESP) or bag filters.

Appearance: Fine powder, light grey to dark grey in color.

Nature: Pozzolanic material reacts with calcium hydroxide in cement hydration to form cementitious compounds.

Our Fly Ash is pure and free from impurities, Our Fly Ash is perfectly suitable for the making of Fly Ash bricks and for building and construction industries and it is cost effective.
Fly Ash is available in two grades such as:

CLASS F CLASS C

Based on customers requirements we can customize the size, grade and packing.

Item No.: 7190-25

Size: 5-11

Soles: Dip Pu Single Density

OVERVIEW
Product Name: Flying Boot

Sizes : 5-11

Colors: Black

STANDARD FEATURES
Abrasion Resistant
Anti Skid
Anti Static
Cushionong Effect
DIP PU Construction
Dual Zipper for smooth Donning & Diffing
Extra Ankle Protection
Genuine Soft Cow Leather
High Flexing
Light Weight
Odour Free
Oil and Acid Resistant
Sweat Absorption

Optional Features
High Voltage Insulation

INDUSTRY
Aviation
Defence and Security

BOOT CARE
* Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents.

* When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage.

* To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort.

* The shoe should be used for the purpose for which it has been designed.

Some facts about feet-

* Most of the muscles are in your feet. Thus you should wear comfortable shoes.

* The body temperature is regulated through your feet

* Maximum number of nerves go through your feet.

100% COMFORT GUARANTEED
* Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free.

* Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort.

* Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort.

* Cushioned Insoles providing better comfort.

* Shock absorbing PU midsole with low density providing uniform cushioning and comfort.

* Light Weight PU for a featherlite feel even during high stress working conditions.

Soda ash
Sodium carbonate in scientific name, soda soda in common name, stone alkali, washing alkali, chemical formula Na2CO3, belonging to In salts, sodium carbonate containing ten crystal water is colorless crystal, crystal water is unstable, easy to weathering,
It becomes a white powder Na2CO3, a strong electrolyte, with salt connectivity and thermal stability, easily soluble water, its aqueous solution is basic.

Gremlog Trading DMCC emerges as a pioneering force in the recycling landscape, offering recycled silica sand in sizes ranging from 0-1mm to 1-4mm. Leveraging the inherent advantages of repurposed silica-based spent foundry sands, Gremlog Trading DMCC champions sustainable practices within the metal casting industry. By providing recycled silica sand, Gremlog Trading DMCC contributes to energy conservation, reduces reliance on virgin materials, and delivers cost-effective solutions for both producers and end users. Gremlog Trading DMCC's recycled silica sand stands as a versatile resource, poised to revolutionize not only traditional applications but also industry-specific needs.
At Gremlog Trading DMCC, we're proud to offer a sustainable alternative for spent refractory bricks. Instead of discarding them, we recycle these bricks into valuable raw materials with various applications.Our recycled refractory bricks can be used in powder coating, road-base aggregate, metallurgical processes, as slag conditioners, and even as feedstock for cement production. This not only reduces waste but also provides cost-effective options for industries.Moreover, these recycled materials can be directly reused in the manufacturing of new refractory bricks, closing the loop on sustainability.Join us in our mission to promote environmental responsibility while meeting your industrial needs. Contact Gremlog Trading DMCC today to learn more about our Recycled Spent Refractory Bricks.

Refractory bricks are indispensable in various industries for lining high-temperature equipment such as furnaces, kilns, and reactors. The utilization of recycled refractory bricks contributes to environmental sustainability by reducing waste and minimizing the demand for virgin resources. Moreover, recycling materials can lead to cost savings compared to sourcing and processing raw materials from scratch, making recycled refractory bricks a cost-effective option for industries. Despite being made from recycled materials, these bricks offer comparable performance to conventional refractory products, providing excellent thermal insulation and resistance to high temperatures. Additionally, recycled refractory bricks can be customized to meet specific requirements, allowing for flexibility based on the application and performance needs of different industries.
Recycled refractory bricks find applications in various industries, including steel manufacturing, cement production, foundries, and glass manufacturing. They offer a sustainable solution for lining high-temperature equipment while maintaining performance and durability.

At Gremlog Trading DMCC, we're proud to offer a sustainable alternative for spent refractory bricks. Instead of discarding them, we recycle these bricks into valuable raw materials with various applications.Our recycled refractory bricks can be used in powder coating, road-base aggregate, metallurgical processes, as slag conditioners, and even as feedstock for cement production. This not only reduces waste but also provides cost-effective options for industries.Moreover, these recycled materials can be directly reused in the manufacturing of new refractory bricks, closing the loop on sustainability.Join us in our mission to promote environmental responsibility while meeting your industrial needs. Contact Gremlog Trading DMCC today to learn more about our Recycled Spent Refractory Bricks.

Wonder fix, is thin bed high Strength, premixed quality assured mortar comprising of ordinary port land cement, Specially graded sand and polymers. It is specially formulated and easily applied giving a Better bonding with AAC Blocks, Hollow Blocks, Flyash Bricks.

Area Of Applications
To join AAC block, fly ash bricks, cement blocks, hollow blocks etc.

Features & Benefits
1) Pre - Mixed Ready to use, only need to add water at site
2) High water retention capability
3) High bonding strength due to polymer modification of mortar
4) Self - Curing
5) Thin bed joints
6) No Shrinkage cracks at joints

Maxx plast is a cementious ready mix plaster used for plastering work in a clean and speedy manner. Due to its high content in additive it allows better shrinkage control as well as improved workability.

Area of Applications
Maxx Plast is recommended for External & Internal plastering of AAC Blocks, Fly ash Bricks, Ceiling and Concrete Surface. Highly Recommended for well- prepared walls requiring thickness of plaster upto 15mm in single layer.

Features & Benefits

1) Well Graded slit free sand
2) Replacement to conventional Plaster
3) Lesser Rebound loss than conventional plaster
4) Fibre reinforced
5) Clean & Speedy work
6) Minimal wastage.

Zinc Ash

Light / Dense Soda Ash
Sodium Carbonate (Na2CO3), commonly known as Soda Ash, may well have been the third "industrial chemical" used by man; perhaps employed sometime after salt (NaCl) and lime (CaO).

Total Alkalinity (as Na2CO3) % by mass 99.0
Chloride (as NaCl) % by mass 0.30-0.40
Iron (as Fe2O3) % by mass â?¤0.005
Matter insoluble in water % by mass 0.08
Sulphates (as Na2SO4) % by mass 0.07
Bulk Density gm/liter (Light Ash) 540-630
Bulk Density gm/liter (Dense Ash) 950-1200