e equipment was manufactured by Jeffrey Rader AB, Sweden in 1995 and it is in very good operational condition. It consist of two heavy duty rolls with removable profilied surfaces which rotate towards each other and presses overzised wood chips between the profiles. Roll drives 2 x 110 kW / 1500 rpm connected with two gearboxes. Hydraulic pump 7.5 kW, capacity 220 m3/h wood chips.
The equipment was manufactured by Jeffrey Rader Inc, Sweden in year 1995, manufacturers type is DynaYield 80-300 and it is in good operational condition. The Chip Conditioner consists of two heavy duty rolls with removable profiled surfaces. They rotate towards each other and pull the oversize chips between them. The profiled surfaces are aligned so that the pyramid apexes on one roll travel in the valleys of the apexes on the adjacent roll. With normal oversize wood, the Conditioner typically generates less than 1% fines and 3% pins
The normal application for the Chip Conditioner is in a chemical pulping process, processing the oversize materials by fissuring the wood chips parallel with the grain to allow the cooking liquors to penetrate the chip, and allow the oversize chip to cook as an acceptable size chip. Another application is in a thermo-mechanical pulping process (TMP), as a preconditioning
An important feature of this machine is its ability to handle small portions of tramp without going off-line. With the so called Dynagage Conditioner, the dynamic roll is allowed to move away from the static roll, and once the tramp is through the unit, the roll automatically moves back to the proper set point without shutting down the flow and together with slow rotation speed enable were low down time and maintenance costs. Roll distance movements are made with a hydraulic system build on the equipment and controlled by 3 position sensors
More information on requests, for spam protection please introduce yourself properly.
Technical data:
Model: RDY 80-300
Manufacturing year: 1995
Capacity (throughput): 220 m3/h loose wood chips
Press roll diameter: 915 mm
Roll length: 2440 mm
Roll motors: 2 x 110 kW / 1500 rpm / 690 V – 50Hz
Press distance between the rolls: 2.2 mm
Gearboxes: 2 x Kipo Benzler TV 512
Hydraulic pump: Rexroth 200 bar with Mecman syliders
Electric motor for hydraulic pump: ASEA 7.5 kW
Weight: 33 000 kg
Length: 5083 mm
Width: 2550 mm
Height: 2400 mm.
Quantity now available in warehouse is 50.000 kgs +/- 10%
After this can be 50 mt per month or more.
Ultra High grade Tantalite with 55-57% Ta2O5.
- Full docs available for your DD.
- The CCIC earlier assay result. Videos I can send via Skype or WhatsApp.
- Location bonded warehouse in Zambia.
- weight list of packing (steel drums) https://www.agsmovers.com/frasers/
- Price : 142,00 USD/kg Ta2O5 ex-warehouse
- Payment 100% paid in warehouse after client final inspection.
Totally two identical 145 kW wind turbine units, made in 1988 by Danish A/S Nortank, total operating hours approx 75000. The equipment have been dismatled since 2008 and inspected and serviced for operation condition and they are ready for immediate delivery
We have totally 2 units of uninstalled complete wind turbines manufactured by Danish A/S Nordtank in year 1988, manufactures type NTK 130 with rated power of 2 x 145 kW. The mills are in good operational condition and ready for immediate shipment. The hubs are heat treated MEEHANITE hubs made by company SABROE and are equipped with cast iron construction which allows adjustment for blade pitch angle. The blades are made by Danish company LM- Glasfiber, material is glass fiber reinforced polyester and they have self-supporting structure with bushing roots. The blades have also hydraulically activated tip brakes which automatically rotate the tips to a 90 degree break angle when wind is lost or it can be used for maintenance stoppage. The gear box in made by German Lohman & Stolterfoht and it is two step planetary gear type with high AGMA rating of 302 kW. The break system is 100% fail safe Nortank’s own hydraulically / mechanically activated brakes. Both units have they own Motorola 6809 multi-microprocessor operated control units which are housed in dust proof steel cabinets.
More information on requests, for spam protection please introduce yourself properly.
Main data of one mill:
Manufacture’s type: NTK 130F/LM
Year of manufacture 1988
Total operating hours: approx. 75000
Rated capacity, max: 145 kW
Number of blades: 3 pcs
Rotor diameter: 22 m
Rotor speed: 44.5 rpm
Cut-in wind speed: 4.0 m/sec
Cut-out wind speed: 53 m/sec (120 mph)
Hub height: 26 m
Generator: ASEA 145 kW / 1500 rpm / 50 Hz
Blade type: LM 9.7 m H/H/T diam. 21 m
Gear box type: Lohman & Stolterfort GPC 145
Clutch type: Lohr & Brokamp Universal Joint No 105
Total weight: 15200 kg.
Krones Toptronic K 719-555 Rotary Empty Bottle Inspector
The Toptronic inspector is made for inspecting empty returnable PET bottles and empty non-returnable and returnable glass bottles. It utilizes state-of-the-art camera technology to provide precision empty container inspection. The sophisticated inspection modules detect even the tiniest damage or contamination – both in glass and PET returnable bottles.
General design features
Modular design
Table top cover and stand cladding in stainless steel
Safe bottle guidance with Raptec handling parts
Blower for removing foam and lubricant residues from the container base
Enclosed and air-conditioned electronics cabinet
Electronic function monitoring
Stop function upstream of machine infeed in response to fallen-over containers
Rejection unit with retaining bar or clamping starwheel
This unit has been in operation only with PET bottles sizes 0.5 liter (four different types), 1.5 liter ( two different types) 1.0 and 1.25 liter bottles and it has been in operation since 2002 and is still in very good operational condition. Handling tools for above mentioned PET bottles will be a part of delivery.
Technical specification:
Manufactured by: Krones AG, Germany
Manufactured in: 2002
Model: K 719-555
Nominal output: up to 72000 bph
Actual output: 35000 bph (with clamping starwheel)
Inspection units (PET)
For foreign containers P.E sensor and camera
Base 1 Camera
Variostation 1 Camera
- sealing surface
Residual liquid High frequency + infrared
Side wall Camera
Optimized scuffing Camera
Variostation 2 Camera
- Base 2
- inner side wall
- full thread
Variostation 3 Camera
- full thread
- lateral neck finish
- inner side wall
Variostation 4 Camera
- sealing surface
- lateral neck finish
Equipment for SaleGeneral Industry Textile Machinery Process Equipment Energy & Power Wood Working.
The vacuum evaporator is made by Italian Ecoteck in year 2003 and operation was stopped in early 2009 and it is in very good operational condition. This unit is made for concentrate acidic liquid wastes and therefore all liquid touching parts are made of acid proof steel ( SS 2353) or PVC. The evaporation capacity of the unit is 5000 liters / day. The unit is a complete working unit and it includes evaporator, boiler, heat pump, centrifugal pump, water-air cooler, steam ejector, control unit and all other necessary equipment to complete the unit.
Operation principle:
Steam rises from the boiler through a drop dispenser to the cooling unit where it condensates. The condensate drops with the gravity down to vacuum system. In-build heat pump heats up the cooling media and simultaneously cools down the condensate. Water – air cooler cools down the extra heat from the process. Necessary vacuum is generated with a centrifugal pump and a steam ejector. Condensate rejection takes place in accordance with prescheduled frequency.
Technical data:
Manufacturer: ECOTECH Srl Italy / Vilokan Ren Miljöteknik Sweden
Type: ECO 5000 VS-HP, R407C
Year made: 2003
Evaporation capacity: 5000 liters / 24 hour (pure water)
Electricity consump.: about 0,15 kWh / liter pure wateri)
Control unit: Siemens Micromaster 420
Compressor: Bitzer Kuhlmachinenbau GmbH,
Compressor type: 6G-40,2
Compressor capacity: 126.8 m3/h, 19/28 bar
Refrigenerant: R 407 C
Main dimensions: 2.8 m x 1.3 m x 2.9 m
Weight: 1500 kg.
Compressors units (totally 4 pcs) are built by York Sabroe in 2002 and 2003 and they operate with R22 refrigerant. Two identical SAB 128 HF screw compressor units are built on a common base frame with an integrated horizontally mounted oil separators, oil circulation pumps and local operating panels. Common (for two compressors) plate type Freon / Glycol evaporator, internal glycol circulating pump and one large Freon buffer tank is also build on the same base frame. Delivery includes also evaporative condenser and LV / Control cabinet and external glycol circulating pump.
Above described 2 x SAB 128 HF packages we have two for sale, one made in year 2002 and the other year 2003. Both packages are still installed and can be tested in mutually agreed time. Units have been in operation approx 6 years and 5 years and they are in very good condition.
Technical data
Number of compressors - 4 pcs
Compressor type - SAB 128 HF
Refrigerant - R 22
Cooling capacity - 4 x 379 kW ( 0 /+40C)
Swept volume - 4 x 454 m3/h
Electric drives (compressor) 4 x 110 kW - 400/690 V 50Hz (also suitable for 60Hz)
Freon buffer tank -2 x 1650 liters
Plate evaporators - Alfa-Laval M10-BW FGR
Evaporative condensers - 2 x BAC VXC 116 Closed Circuit
Condenser fans - 1 x 17 kW and 1 x 4 kW for each
Condenser circulating pumps- 2 x Grundfors LP80 - 25/133
Glycol pumps - 2 x Grundfors LP 80 - 25/133
2 x Hilge Mahana 65-160
GEA Varitherm VT-20 Plate Heat exchanger is made of several Varitherm-design stainless steel plates which are combined to form one effective heat transfer unit. Within each plate package the heat exchanger plates support each other at the metal-on-metal profile cross points, which ensure the stable behavior of the plate gap. The plate gasket has so called glue less sealing system. VT-20 is specially designed for cooling and heating of fluids with particle content up to a particle size of 2 mm as well as condensation of vapors, gas cooling and gas dehumidifying. This unit is in good operational condition.
Manufacturer: GEA Ecoflex GmbH
Type: VT 20 BC-12
Serial no: 170/12982
Year of manufacture: 2000
Frame material: Stainless Steel AISI 4571
Plate material: Stainless Steel
Max. operating pressure: 16 Bars
Max. operating temp. 100 C
Max flow volume: 90 m3/h
Width: 337 mm
Length: 999 mm.
Manufacturer: GEA Ecoflex GmbH
Type: VT 20 BC-12
Serial no: 170/12982
Year of manufacture: 2000
Frame material: Stainless Steel AISI 4571
Plate material: Stainless Steel
Max. operating pressure: 16 Bars
Max. operating temp. 100 C
Max flow volume: 90 m3/h
Width (plates) 337 mm
Length (plates): 1370 mm.
Rotary Lube Blower / Vacuum compressor KAESER EB 420 C û 38 m3/min, 53 kPa
There are two identical sets of oil-free, 2 lobe rotary blowers, made by Germand Kaeser Kompressoren GmbH in year 2005 with accessories. Manufactures type is Kaeser ED 420 Compact Omega Pluss 53 and accessories include a control cabinet with two inverters and programmable Kaeser Start Control STC 30 unit, totally 6 preliminary intake air filters and 3 final air intake filters with their steel supports. The rotary blower units have removable sound enclose for noise insulation. Operation of the equipment was stopped in year 2007, total running hours approx 7000 and therefore they are in excellent operational condition. In addition, we can offer you service maintenance by the manufacturer at separate cost.
This equipment is suitable for demanding dust collection and pneumatic transportation of various products due to oil free operation. For pneumatic transport application some changes in filters and other parts are needed.
The rotary lobe has two blower shafts with high efficiency Omega profile in a blower block. The rotary lobe and the block have a very small distance and they are not touching each other's and therefore there is no need for lubrication oil. The rotors are driven by high efficiency electric motor via belt connection and they both are installed on the same base frame. . The inlet and discharge silencers are designed to be effective at all frequencies and are eminently suited to variable speed . Higher rotational blower speeds produce high volumetric efficiencies, which in turn lower discharge temperatures and power consumption. The Compact Range ensures that all serviceable items are accessed from the front panels of enclosures.
The preliminary intake air filters are combination of cyclone and bag filter and it removes most of the dust from inlet air. Fine filter is a combination of cyclone and 138 ceramic fine filters which removes fine dust very effectively.
Technical Data
Manufacture's type: EB 420 Compact Omega plus 53
Manufactured in year: 2005
Suction capacity with max vacuum:38,0 m3/min
Power demand max: 40,3 kW
Rotor's rotation speed 4120 rpm
Max suction vacuum: 0,53 bar (abs.)
Discharge pressure: 1,0 bar (abs.)
Max pressure increase: 470 mbar
Temperature rise max -t: 82 K
Electric motor: 45 kW û 50 Hz / 400/690V û 83/48 A
Electric motor nominal speed:2965 rpm
Protection class: IP 55
Inverters: Mitsubishi FR-F740-01160-EC
Case ventilation fan: 370 W û 50 Hz / 230 / 400V
Weight blower with the case:1120 kg
Blower case main dimensions:1.8 x 1.7 x 1.8 m (K x L x S)
Noise level: 99 dB (A)
Noise level with the case: 84 dB (A).
49 Other Type Of Woods Suppliers
Short on time? Let Other Type Of Woods sellers contact you.
