Silent Hangers are fixed by a threaded rod to hold the main channel in silent ceiling systems. They are used in cinema ceiling systems and have high performance in sound insulation.
Advantages:
Ceiling System
Gframe L-bracket is a simple rigid structure in the form of an L. It is used in dry lining and external cladding.
Advantages:
Lining System
Partition System
The furring channel joiner is used in ceiling application where connection between two consecutive furring channels is needed. This joiner is easy to install and does not require any special tool to be installed.
Advantages:
Ceiling System
Lining System
The perforated corner bead is used for exterior corner jointing. It allows the jointing compound to be fully settled on the jointing area; the compound goes through the bead and strongly fix the corner to the boards. It is used in dry lining and drywall partitioning to give a smooth and impact resistant finishing.
Advantages:
Partition System
Lining System
The control joint is a combination of two perforated beads that interlock with a PVC rubber joint. It may be used as a control joint in suspended ceilings, drywall, and lining based on project requirements. The control joint is designed to allow up to 4 mm movement in each direction.
Advantages:
Partition System
Lining System
Ceiling System
Wafer head screws are self-drilling steel screws used for metal-to-metal fixation. They are used to fix the metal frames of the drywall systems.
Advantages:
Partition System
Lining System
Ceiling System
Wire connection clips are used in suspended ceiling systems to fasten the secondary furring channel to the main C- 38 channel. GaccessoriesTM wires are designed to have a thickness of 2 to 3mm and can bear up to 25 kg.
Advantages:
Ceiling System
Laminating screws are used to fasten multiple layers of gypsum board to metal profiles. They can be used in partitions, shaft walls, lining and suspended ceilings.
Advantages:
Partition System
Lining System
Ceiling System
The drop-in anchor is characterized by its ease of installation, anti-rust, and high pullout strength. It is used in suspended ceilings.
Advantages:
Ceiling System
The C-Clamp is used as a bracket to hold the C-38 channel in suspended ceiling applications. It is mainly used for moderate loads, attached to 6 - 8 mm threaded rods.
Anchor bolt is a heavy-duty anchor made of galvanized steel suitable for fixing hangers, brackets, channels, or other metal profiles to concrete walls. It is used for high heights and loads.
Advantages:
Partition System
Lining System
Ceiling System
Anchor bolt is a heavy-duty anchor made of galvanized steel suitable for fixing hangers, brackets, channels, or other metal profiles to concrete walls. It is used for high heights and loads.
Advantages:
Partition System
Lining System
Ceiling System
Anchor bolt is a heavy-duty anchor made of galvanized steel suitable for fixing hangers, brackets, channels, or other metal profiles to concrete walls. It is used for high heights and loads. Its characteristics include a torque-controlled expansion, a high load capacity in
solid material, and no harm coming from removing fixtures as they do not affect the anchor.
Advantages:
Partition System
Lining System
Ceiling System
Phosphate Self-Tapping and anti-corrosion screws are used for drywall fastening. They are used to fix plasterboards to light gauge steel framings of up to 0.7mm in thickness. The length of screw used should allow for a nominal 10mm penetration into metal framing.
Advantages:
Partition System
Lining System
Ceiling System
Self-drilling and anti-corrosion screws are used for drywall fastening. They are perfect for fixing plasterboards to light gauge steel framing greater than 0.7mm thick. The length of the screw used should allow for a nominal 10mm penetration into metal framing.
Advantages:
Partition System
Lining System
Ceiling System
Stopping Bead is a squared corner metal frame that slides onto the board for a smooth finish in a suspended ceiling application. The finishing coats are applied up to the edge of the bead.
Advantages:
Ceiling System
Gaccessories Perforated Shadow Line Stopping Angle corner bead is used for exterior corner jointing. It allows the jointing compound to be fully settled on the jointing area; the compound goes through the bead and strongly fixes the corners to the boards. It is used in suspended ceiling and false ceiling applications.
Advantages:
Ceiling System
* Helical wire diameter : 1.30mm - 1.50mm.
* Coils per m2 : 100-225 Units.
*Bonnell spring end ring : 62mm - 95mm.
*Bonnell spring wire diameter 1.80mm - 2.40mm.
*Bonnell spring turns : 4-7 turns.
*Bonnell spring height :70-210mm.
*Frame :round wire 4.5 - 5.00mm.
*Packing : press packed ( with frame, 15-25 unit per pallet pack )
or roll packed ( without frame, 5 - 15 unit per roll )
* Pocket spring diameter : 35mm - 70 mm.
* Pocket spring wire diameter : 1.20mm - 2.20mm.
* Coils per m2 : 200- 700 Unit ( according to customer request ).
* Pocket spring height : 50mm - 210mm.
* Top and bottom with / without Nonwoven.
* Packing : roll Packed ( 5-10 Units, Roll Pack ).
