Taurus Piping Solutions is a leading manufacturer of branch fitting, buttweld pipe olets, socket weld and threaded pipe olets in all material grades and in compliance with international standard MSS-SP-97. Our production range includes pipe olets such as weldolet, sockolet, threadolet, laterolet, elbolet, nipolets and sweepolets. Weldolet is one of the most commonly used branch connection fitting. It is widely considered a buttweld fitting, as it is welded onto the outlet of the pipe. A welding outlet helps in minimizing the stress concentrations and provides integral reinforcement without the need for reinforcing the weld. SIZE : 1/8" To 36" (As Per Customer Requirement) CLASS & SCHEDULE : In All Class & Schedule FORM : Socket-weld & Butt-weld STANDARD : ASME 16.11, MSS SP- 83 MATERIAL GRADE : Carbon Steel Branch Fittings : ASTM A105 & A105N , SA234 WPB, SA234 WPC,SA42 WPL6, SA42 WPL3, WP1. MSS-SP75 WPHY,WPHY 46,WPHY 52,WPHY 56,WPHY 60,WPHY 65, WPHY 70 DIN 1629 St37, RST37.2 St52 Low Temperature Carbon Steel Branch Fittings : A350 LF2/A350 LF3 Copper Alloys Branch Fittings : ASTM / ASME SB 61 / 62 / 151 / 152 C 70600 (CU -NI- 90/10) C 71500 (CU -NI- 70/30) UNS NO. C 92200, UNS NO. C 83600,UNS NO C 10100 C 10200, C 10300, C 10800, C 12000, C 12200 Nickel Alloys Branch Fittings : Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22, C276 Duplex Branch Fittings : ASTM A 182 UNS F 44, F 45, F51, F 53, F 55, F 60,F 61 Stainless Steel Branch Fittings : ASTM 182 F 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L Alloy Steel Branch Fittings ASTM SA 182 F1/F5/F9/F11/F22/F91:
Material : Stainless Steel / Duplex Steel / Nickel Alloys Grade : A2 , A4 , 200 Series Standard : Metric - DIN 125 , IS 2016 , DIN 9021 , B18.22.1 Size In Dia : Metric- 2 MM ~ 100 MM Manufacturing By : Cold Forming
Material : Stainless Steel / Duplex Steel / Nickel Alloys Grade : A2-70 , A2-80 , A4-70 , A4-80 , 200 Series Standard : Metric - Din 934 , Iso 4032 , Is 1363 , Is 1364 Inches - Bs 1083 , Ansi B18.2.2 Size In Dia: Metric - M2 ~ M100 Inches - 1/8" ~ 4" Manufacturing By: Cold Forming Hot Forming
Product Description - Stainless Steel:AISI 304, 304L,3 l 6, 316L, 31 O, 317, 3 l 7L, 321, 34 7, 41 O, 420,904Letc. Alloy Steel: 4.6, 5.6, 6.6, 8.8, 10.9 & 12. 9 /'R', 'S', 'T' Conditions. Carbon Steel: Bare Condition, Galvanized, Phosphetised, Cadium Plated, Hot Deep Galvanized, Bloodied, Nickel Chrome Plated,etc. Key Specifications/Special Features - Non Ferrous Metal: Copper, Brass, Aluminium, Titanium, Nichrome, Al.Bronze Phosphorous Bronze, etc. Types: Baits, Nuts, Washers, Anchor Fasteners, Stud Bolts, Eye Bolt, Stud, Threaded Rod, Cotter Pin, Socket Head Screw,, Fine Fasteners & Spares, Foundotion,Fasteners, etc.
We are the leading supplier for the Glass Fitting Hardware as follows - Patch Fitting - Floor Spring - 3D Hinges - Glass Door handle - Silicon Saleant - PVC bar for Glass Door - Routels - And more... Feel free to contact us on
Technical Specification The latest technology used in construction of buildings and bridges. They are used as a major element in the composite structure. Excellent quality, high load bearing capacity, durability, faster speed of construction, etc. are some of the reasons why it is gaining popularity in the construction industry. Shear connector means headed steel studs. These are welded to a structural member for achieving composite action with concrete. Shear connector is one of the major elements in the composite structure. Features Installation and welding process is quick and simple; Provides little obstruction to the slab reinforcement; Allows more satisfactory compaction of the concreate around the connectors; It provides equal shear strength in all directions.
Technical Specification Threaded Rod ASTM 193 SS 304/304L, Stainless Steel ASTM 193 316L/316H/316Ti Threaded Rod Stud, Threaded Rod Stud SS 317/317L, Carbon Steel B7/B7M Threaded Rod Stud, Duplex Steel S31803/S32205 Threaded Rod Stud, Incoloy 800/800H/800HT Threaded Rod Stud, Inconel 600/601 Threaded Rod Stud, Monel 400/K500 Threaded Rod Stud manufacturer, Hastelloy B2/B3/C22 Threaded Rod Stud
Carbon steel and ductile iron backing rings / backing-up rings used for the HDPE pipe and other plastic pipes. Welcoming your detailed inquiry! The outcoating can be Painting, FBE ( Fuson Bonded Epoxy), DC , ETC. QQ: 2235192007 EMAIL: email@example.com
Noise barriers products supplied to projects by Vinh Hung IP meet all the current standards, enable to minimize the noise volume affecting the surrounding area (residential areas, hospitals, schools, industrial parks and so on) and offer the beautifulness. The noise barrier walls are windproof, increases the concentration for drivers, which increases the safety for people and vehicles on roads Absorptive noise barrier wall: Using materials capable of absorbing the sound, punching plates and so on, which prevents the sound reflection. Sound absorption Standards: Noise Reduction Coefficient Ã¢?? NRC indicates the amount of noise power absorbed by the noise absorbing barrier wall. For the absorptive noise barrier wall, the NRC will be within 0.6 to 0.9 range (FHWA highway noise barrier design handbook). Reflective noise barrier wall: Using the good noise insulation materials like Polycarbonate panels (PC), Polymethyl methacrylate panels (PMMA), Glass laminate. Sound reflective Standards: Transmission loss coefficient Ã¢?? TL will measure the sound power hit on or transmitted through the walls. For the reflective noise barrier wall, the TL coefficient is >25 dB at 500HZ and >30 dB at 1000HZ (refer to KS F4770 standards). ALLATION METHODS Preparation: Gather materials, accessories and installation Check the surface of the basement system: Check the distance among the anchor Check the dimensions of post flanges, positions of bolt holes and anchor
1. Product Overview VHF finger expansion joints made by Vinh Hung Investment and Production Co., Ltd (VinhHung IP), include 2 types: Cantilever VHF-C and over-gap VHF-O, according to: AASHTO LRFD standards ASTM D 3542 92 (2003) standards VHFC and VHFO are synchronously manufactured with high accuracy finger plates and accessories like bolts, rubber sheets-water prevention steel plates that bring profitability to new construction as well as inspection and maintenance work in service. VHFC and VHFO accommodate the medium movement to big movement and can be used for both straight and skew bridges. 2. PRODUCT CHARACTERISTICS Totally accommodate the medium and large longitudinal movements, and also vertical and transverse movement if any... Simple installation, maintenance and replacement, which allows to replace the individual finger plates in short period of time and for each lane. High loading resistance capacity, especially the impact load. Also available for skew bridges. Rubber seal system is designed to be totally water-tight and prevent dust and debris. Can be designed to compatible with different thicknesses of bridge decks. To ensure the long-lasting durability, VHF finger expansion joints are protected from corrosion with methods like: paint with 2-component epoxy coating, PU-based painting (Polyurethane).., zinc coating according to ASTM A123, and especially Al-Mg coating (Al 5% and Mg 95% ratio) which ensures the durability of 100 years. This method is proved by the brine spraying test in 6000 hours (dry-wet 8hour cycles) according to ASTM B117 standards.
1. PRODUCT OVERVIEW VHR joints made by VinhHung Investment and Production Co., Ltd (Vinh Hung IP) is the steel strip-seal joint comprising of two steel rails with anchor bars connected to embedded bars in the pier cap of the headwall of the abutment, elastomeric strip serves as the trough for drainage and debris, nosing materials: non-shrinkage mortar or concrete with minimum compressive strength of 40MPa. There are 2 main types of VHR expansion joints identified by the cross-section of the steel rails: VHR-C steel rail expansion joint and VHR-F steel rail expansion joint. 2.PRODUCT CHARACTERISTICS Totally accommodate to longitudinal movement up to 100mm, and also vertical and transverse movement if appear. Simple in design and installation, high load bearing and durability. The joints are designed suitably for curb and median structures. Totally water-tight. To ensure the long-lasting durability, VHF-steel strip expansion joints are protected from corrosion with methods like: coat with 2-component epoxy painting, PU-based paint (Polyurethane).., zinc-coating according to ASTM A123, and especially Al-Mg coating (Al 5% and Mg 95% ratio) which ensures the durability of 100 years. This method is proved by the brine spraying test in 6000 hours (dry-wet 8-hour cycles) according to ASTM B117 standards