Sodium tripolyphosphate is an inorganic substance with chemical formula Na5P3O10. It is a kind of amorphous water-soluble linear polyphosphate. It is used as water retention agent, quality improver, pH regulator and metal chelator
Main Application:
Industrial use Used as detergent, auxiliary, also used in petroleum, metallurgy, mining, paper making, water treatment, etc.. Mainly used as synthetic detergent additives, synergist for soap and soap to prevent a fat separation and bloom. It has a strong emulsifying action on lubricating oils and fats and can be used to regulate the pH of buffer soap solutions. Water softener for industrial water. Tanning agent. Dyeing assistants. Paint, kaolin, Magnesium Oxide, calcium carbonate and other industries in the preparation of suspension as a dispersant. Drilling mud dispersant. The paper industry is used as an anti oil agent. Canned food, for the food industry in fruit juices, dairy products, soy milk and other quality improvement agent, water retention agent. Mainly for canned ham tender, broad beans in the skin softening, it can also be used as a thickening agent and softener.
Capron Magnatec Plus is a premium-quality four-season gasoline engine oil produced with semi-synthetic base oil and high-quality additives that features excellent anti-rust and anti-corrosion properties.
Engine Oil 10W-40 is a multi-grade lubricant formulated to provide reliable engine protection across a wide range of operating temperatures. It helps reduce friction and wear, maintain engine cleanliness, and support smooth engine performance. It is commonly used in passenger cars, commercial vehicles, motorcycles, and other compatible gasoline or diesel engines, depending on the formulation and OEM requirements.
Advantages
Excellent protection against engine wear
Good cold-start performance
Maintains viscosity at high operating temperatures
Helps reduce sludge and deposit formation
Supports smooth and efficient engine operation
Good oxidation and thermal stability
Suitable for a variety of automotive applications
Super Lube Engine Assembly Grease is a soft White NLGI 0 grease.
Super Lube Engine Assembly Grease is waterproof and is an excellent lubricant for anti-seize and engine assembly applications.
Super Lube Engine Assembly Grease can be used on all types of metal for coating moving parts and engine rebuilding applications.
Super Lube Engine Assembly Grease provides a lubricant film to the engine that prevents scoring and reduces heat until the motor oil located in the crankcase has sufficient time to lubricate the engine.
Petroleum Lubricant Oil is a high-performance lubricant formulated from premium base oils and advanced additive packages to provide superior protection against wear, corrosion, oxidation, and thermal degradation. It is suitable for automotive engines, industrial machinery, hydraulic systems, compressors, gearboxes, and heavy-duty equipment.
Our lubricants are manufactured under strict quality control standards to ensure consistent performance, extended equipment life, reduced maintenance costs, and improved operational efficiency. Available in various viscosity grades and formulations to meet specific customer requirements and international standards.
Applications include automotive, marine, industrial, mining, construction, power generation, and manufacturing sectors.
KaHLUB 360 G is a GTL based Carbide grinding oil. KaHLUB 360 G is clear in appearance, has low odour, low viscosity and high flash point. KaHLUB 360 G contains specially designed antirust, extreme pressure & anti-wear additives. It prevents cobalt leaching for a long period of time thereby increasing fluid life and making it very economical.
Applications- Carbide-Tungsten, cemented and silicon grinding, Light to medium duty cutting operations
Material Compatibility- Tungsten carbide, High speed steel, Cermet, Stainless Steel and Mild Steel, Copper, Magnesium etc.
PFPE KING P-BARRIERTA I S-402 is a premium perfluoropolyether (PFPE) based high temperature lubricating fluid developed for demanding industrial lubrication applications. Designed with highly refined PFPE synthetic base oil, this lubricant provides outstanding thermal stability, low evaporation characteristics, excellent chemical resistance and reliable lubrication performance under severe operating conditions. The product is suitable for industrial equipment operating under high temperatures, continuous loads and aggressive chemical environments where conventional mineral oils or standard synthetic lubricants may not provide sufficient performance. Its stable molecular structure helps maintain lubrication over extended service periods, contributing to reduced maintenance intervals and improved equipment reliability.
PFPE KING P-BARRIERTA I S-402 offers excellent resistance to oxidation and thermal degradation. Even when exposed to elevated temperatures, the lubricant maintains consistent viscosity and lubricating performance, making it suitable for equipment requiring long-term operation. Its low volatility minimizes lubricant loss at high temperatures while helping maintain stable lubrication films on moving components. This characteristic also makes the product suitable for applications where clean operation and low residue formation are important.
The PFPE formulation demonstrates broad compatibility with many engineering plastics and elastomer materials commonly used in industrial machinery. This allows the lubricant to be applied in equipment containing plastic gears, seals, guides and other polymer components. Compatibility testing under actual operating conditions is still recommended before large-scale use.
PFPE KING P-BARRIERTA I S-402 performs effectively across a wide operating temperature range from approximately -25�°C to +260�°C. This enables smooth equipment operation during both low temperature start-up and continuous high temperature service.
PFPE KING YM 3-65 N is a premium lubricating oil formulated with high-quality perfluoropolyether (PFPE) base oil for long-term lubrication of friction points involving metals, thermoplastics, and elastomer components. The lubricant is specifically developed for applications requiring excellent wetting performance, higher lubricating film strength, and reliable operation over an extended service life. Its optimized formulation helps improve lubrication efficiency while supporting smooth assembly and long-term component protection.
The lubricant features excellent wetting properties that enable rapid and uniform spreading across contact surfaces. This creates a stable thin lubricating film that reduces friction between moving components and supports consistent operation. The efficient wetting behavior also helps minimize lubricant consumption during production while maintaining reliable coverage of friction points.
PFPE KING YM 3-65 N is designed for applications requiring long-term or lifetime lubrication. The PFPE base oil provides outstanding resistance to ageing, allowing the lubricant to maintain stable physical properties throughout prolonged operating periods. This helps reduce maintenance frequency, extend lubrication intervals, and improve equipment reliability.
The formulation demonstrates excellent compatibility with numerous material combinations, including metals, thermoplastics, and many elastomer materials. Its broad compatibility makes the lubricant suitable for precision assemblies where different engineering materials operate together. Material compatibility should be verified under actual operating conditions before large-scale production.
PFPE KING YM 3-65 N has a low-odor formulation, making it suitable for production environments where clean operation and operator comfort are important. In addition, the lubricant is resistant to many chemicals and remains insoluble in most commonly used cleaning agents, helping preserve lubrication performance in demanding industrial applications.
Compared with lower-viscosity products in the same series, PFPE KING YM 3-65 N provides a thicker lubricating film due to its kinematic viscosity of approximately 60 mm�²/s at 40�°C and 8.5 mm�²/s at 100�°C. This makes it especially suitable for applications requiring improved load-carrying capability and enhanced wear protection.
The product operates across a temperature range of -40�°C to 120�°C, maintaining stable lubrication characteristics under both low-temperature startup conditions and elevated operating temperatures. Its density is approximately 1.90 g/cm�³ at 20�°C, ensuring reliable lubricant distribution and consistent application performance.
Capron Eco Magnatec is a four-season gasoline engine
oil produced with mineral base oil and good-quality
additives which features proper anti-rust and anti-corrosion properties.
Capron Eco Magnatec is a four-season gasoline engine
oil produced with mineral base oil and good-quality
additives which features proper anti-rust and anti-corrosion
properties.
Capron Eco Magnatec is a four-season gasoline engine
oil produced with mineral base oil and good-quality
additives which features proper anti-rust and anti-corrosion
properties.
Capron Eco Magnatec is a four-season gasoline engine
oil produced with mineral base oil and good-quality
additives which features proper anti-rust and anti-corrosion
properties.
Procured from castor seeds by using cold extraction technique, the Castor Oil (Various Grades) is reckoned for its anti inflammatory and anti oxidant properties. This pale yellow coloured viscous liquid has numerous health benefits. This oil is used as one of the key ingredients of beverage and baked items. As per medical research, this oil acts as a natural remedy for arthritis.
INTRODUCTION
The product is a high molecular 30 TBN Calcium Sulphonate. The increased oil solubility of the organic portion of this Sulphonate enables the product to provide rust protection and acts as a dispersant for graphite and molybdenum disulfide. It can be used as an additive in lubricating oils, greases, rust inhibition, antiwear and hydraulic fluids.
SPECIFICATION
Test Method Minimum Maximum
Appearance Visual Brown liquid Brown liquid
Colour ASTM D 1500 2 5
Sp. Gravity @ 15.6 C ASTM D 1298 0.95 1.05
Flash Point C (COC) ASTM D 92 175 -
Viscosity @ 100 C, cst ASTM D 445 40 70
Avg. Molecular wt. ASTM D 3712 1000 1100
TBN (mg KOH/gm) ASTM D 974 28 35
Calcium Content %[w/w] GL EDTA 1A 2.8 3.0
FORMULATION
The product is recommended for use at 0.5% to10.0%wt. In suitable base stocks to provide
detergency & anti-rust performance characteristics to oils. It is compatible with mineral base oils, white oils, and synthetic base stocks.
APPLICATION
Imparts excellent rust prevention, detergency and Anti oxidant Properties.
Corrosion inhibitor in mill oils, short-term rust preventatives, coatings and greases.
Dispersant and corrosion inhibitor in engine oil.
Provides excellent resistance to coated Cold Rolled Steel for antirust applications.
Works in extremely hostile conditions like highly acidic environment as well as highly humid atmosphere.
It is non-staining having detergent, dispersant properties.
Environmental Friendly, Biodegradable without side effect.
HANDLING AND STORAGE
Calcium Sulphonate is normally handled at room temperature. For general purposes, the following storage and handling temperatures are recommended: Storage Handling 50-70C
(122-158F).
For more extensive information on the safe handling and use of this product, see the Material
Safety Data
6223 Lubricating Oil Suppliers
Short on time? Let Lubricating Oil sellers contact you.
