Find Verified Electronic Semi Conductor Devices Other Components Suppliers, Manufacturers and Wholesalers

Sell mother board, ldpe films scrap, nylon fishing net scrap, hdpe bottles scrap, abs computer scrap, pu foam scrap, mill berry copper scrap, aluminum 6063 scrap, used conveyor belt, pp ropes scrap, pp bags scrap, eps block, eva film scraps, bopp films&roll, pa scrap, baby diaper in bales used rails, hms 1&2, pet bottles, fridge compressor and ac, electric motor, pvc pipe scrap copper scrap, flakes, pet flakes, brass scrap, used condoms, used glooves, battery scrap, used tyres, shredded iron steel, millberry scrap, scrap flat screen television, scrap stabilizers, used wires..


As per customer request

2835 ordinary flexible LED strip lights is an economical main product. The light bar has strong deformability and can be cut and wound at will. It has high flexibility and strong variability in engineering applications. The product adopts DC12V direct current low-voltage power supply mode, with high safety factor and simple engineering acceptance procedures. It has the characteristics of high brightness, low light attenuation, energy saving and environmental protection.

Product Name Model Parameter Color CCT/Wavelength
60led/m SMD 2835 Flexible Led Strip LC-BB2835WW60 Voltage: DC12V/DC24V Power: 14.4W/M
10MM Width PCB
5M/Roll
IP20/IP65/IP67/IP68 available Warm White 22-24LM/Led
2800-3200K
LC-BB2835W60 White 22-24LM/Led
6000-6500K










Packaging & Shipping
Packaging:

5m per roll ,One roll in one Package bag

Anti-static bags+Neutral packing carton box

Shipment:

1.Ship Way:Door to Door express or by Air and Sea

2.Shipping port: Shenzhen, Mainland China

3.Leadtime:Sample can be delivered in 3-5days

4. Production lead time for 10000M:7-10days

Our Services
1.Reply you in 24 hours

2.Customized design,ODM/OEM Customized Service are available
3.Professional engineer team provide full support in the whole control system solutions.
4.Experienced sales consultant to cooperate with your work





Warranty:

1.All products we sell are in good quality and have been tested before they are shipped out.

2.We offer 3 years Warranty.

Company Information
Shenzhen LED Color Co., Ltd. is a leading manufacturer of digital LED packaging and LED strip lighting products in China. The company was established in 2012 and is a national high-tech enterprise specializing inthe design and manufacturing.We have a standard factory building of more than 8,000 square meters and more than 100 employees. And set up a professional and precise LED strip dust-free workshop, with 30 LED encapsulation production lines, multiple LED strip automatic production lines, 4 high-speed SMT assemble machines, various advanced instruments and equipments.

With 10 years of R&D and production experience technical team,we have successfully launched the addressable LED Chip, ordinary SMD LED, digital LED strips, ordinary flexible LED strip lights, COB LED strips, LED flex neon, CCT adjustable strip, RGBW led tape, constant voltage led strip lights and so on.We can provide customers wit a complete product line and OEM/ODM,customized production solutions.

THY Precision Medical Micro Molding offers medical micro molding services meets ISO 13485 certified and Class 100K clean room requirements.


At THY Precision, we understand that molding for the medical industry requires the highest levels of repeatability, accuracy and quality. We are prepared to satisfy our medical clients' exacting needs:

1. Apply for disposable medical consumables and laboratory supplies.
2. Medical device qualification ISO 13485 certified and Class 100K injection clean room to ensure high and steady quality.
3. Highest quality medical micro plastic injection molded components.
4. Medical grade titanium alloy used to manufacture highly specialized medical implants.
5. CNC equipment enables manufacturing high quality, precise medical devices and components.


THY Precision provides OEM medical plastic micro parts:
As the medical field demands smaller and smaller sizes, it is our goal to continue to provide a wide range of minimally invasive micro medical components. We specialize in plastic medical devices including chamber filters, dialyzer filters, caps and pump connectors, intravenous infusion drip components, bacteria filters, laboratory consumables, injector cartridge for IOL surgery... etc.


THY Precision manufactures custom medical grade implants:
Titanium medical devices we have made include: spinal implants, bone plates, surgical instruments, artificial joint, knee replacement, blood collection needle, medical shell, medical sterilization accessories, etc.


THY Precision Introduction Video:
[ https://youtu.be/aLFL4EFKoy0 ]

Do1200 and do1200tc dissolved oxygen sensors

Item no.: do1200/h, do1200/t, do1200tc/h, do1200tc/t, 971598, 971598tc

Reliable galvanic sensing technology
Compact 12mm design
For portable, laboratory or on-line use
Optional integral atc element
Easy to use pre-membraned replacement caps

The do1200 and do1200tc feature dependable galvanic technology. No warm up period is required. Sensors are supplied with fast responding hdpe membrane caps for portable or lab use. Optional ptfe membrane caps are available for on-line or heavy uv exposure applications. Fill solution is replaceable when required.

The do1200 is supplied without internal temperature compensation. The do1200tc can be supplied with a variety of user defined atc elements. Standard cable length is 2.5 feet with a tinned lead termination. Longer cable lengths and connectors are available for an additional charge. For on-line use, our fc75p 3/4 inch in-line fitting may be ordered to provide for mounting into 3/4 inch fnpt threaded tees.

Do1200 laboratory dissolved oxygen sensor specifications
Range: 0-20 mg/l
Body material: epoxy and noryl
Max temperature: 50 degrees c
Saturation output:
Hdpe = 47mv +/- 9mv,
Ptfe = 33mv+/-9mv
Pressure: 0-100 psig (7.5 bar)
Calibration: single point in air
Response time: after equilibration, hdpe 1 minute for 2mv, ptfe 2 minutes for 2mv

We offer fine quality CFL Cap with wire. These caps are used to make CFL Bulbs and other accessories. These are also made available in customized dimensions. We use high quality raw material for manufacturing these Caps under the supervision of the skilled team of professional they ensure its durability and working ability.

available in
aluminum type
nickle type
chineese type

We are the manufacturer of rotating led bub, which are available in standard size and are available in competitive price. We give value to our esteemed customers and we strive to know their requirements as well as needs in the best possible way. For more details contact us.

We are the manufacturer of rotating led bub, which are available in standard size and are available in competitive price. We give value to our esteemed customers and we strive to know their requirements as well as needs in the best possible way.

INFRARED SENSOR WITH SILICON LENS SMTIR9902SIL

Typical Applications
* Contactless measurement of surface temperatures
* Temperature measurement of moving objects
* Remote measurement due to small angle of view
* Climate control
* Medical instruments

Introduction
The Smartec infrared sensor type SMTIR9902SIL is a standard Smartec SMTIR9902 sensor equipped with a silicon lens for measuring radiation temperatures within a small angle of view (7.27'). The SMTIR9902SIL contains a NI1000 temperature sensor for measuring the temperature of the sensor itself. The temperature range of this internal sensor is -20 to 100 'C. The sensor is mounted in a modified TO-05 encapsulation.

INFRARED SENSORS SMTIR9901/02

Typical applications
* contactless measurement of surface temperatures or infrared radiation
* temperature measurement on moving objects
* continuous temperature control of manufacturing
* thermal alarm systems
* climate control
* medical instruments
* home appliances

Features
High accuracy
High sensitivity (110 V/W)
Low resistance (50 Kohm) and therefore
Very good signal-to-noise-ratio
Good response time (40 ms)
Low cost thin film technology

Introduction
The Smartec infrared sensors SMTIR9901 and SMTIR9902 are sophisticated full silicon infrared sensors which can be used in measuring the radiation temperature without any contact. For the different radiation temperature ranges various filters are available. The sensor type SMTIR9902 contains a temperature sensor for measuring the temperature of the sensor itself. The temperature range of the sensor-element is between - 40 to 100 'C. The sensor is available in a standard TO-05 encapsulation and with a 5.5. µm. high pass filter.

Easy and accurate measuring of the sensors temperature by means of a built-in temperature sensor (only for type SMTIR9902).

Overall size of lamp: 140 140 20mm
Light source type: LED
Power/W: 3W
Voltage range: 5V, 0.5A
Surface treatment: original wood color & cloth cover primary color
Material type: rubberwood + cloth cover

Overall size of lamps: 230 170 100/230 170 120mm
Light source type: LED
Power/W: 3W
Voltage range: 15V, 0.5A
Surface treatment: log color & white
Material type: rubberwood + PVC

Smoke Visibility Tester:

Smoke Detection The test device is comprised of a plywood chamber with an inner side painted with heat-resistant paint and a hole in the ceiling that allows a light metre cell to be held while being tested. The chamber's bottom has a hole that lines up with the hole in the ceiling. The bottom hole has a clear glass bulb installed in it. A hole is present on the chamber's left side, and an exhaust fan has been mounted there. A hole on the right side allows air to circulate when smoke is being expelled into the chamber. A hinged door with a transparent glass pane is on the front of the chamber. The right-side and left-side holes of the chamber each have shutters. An electronics regulator installed in the instrument panel is used to control the LUX of the bulb. The black drape covered the front glass window and the hole in the ceiling. On the section stand, the chamber was mounted. The device comes with a LUX metre for measuring the LUX of the light. The device also comes with a stainless steel plate and an aluminium silicate plate. A stainless steel specimen frame with provisions to hold the specimen and slide the specimen frame is slanted at a 20�° angle to the vertical. On the chamber's bottom, a burner is fixed at a 45-degree angle. For the purpose of adjusting the gas supply, a flow metre, pressure gauge, and pressure regulator are installed on the section frame. For long-lasting corrosion resistance, all the pieces have been coated or polished. No gas will be included with the instrument from our end.

Product Description


Product Name Smart led bathroom mirror
Light Color White light color&warm light color&double light color
Mirror Material 5mm silver mirror with waterproof LED light strips,with optional functional switch
Size
600 800, 700 900, 750 1000, 750 1200, 800 1300, 900 1500mm (or customized size)

Application
hotel bathroom decoration; washing/toliet; house, hotel, school, hospital , apartment, etc.

Lens
Environmental protection mirror safety and explosion-proof treatment.

Defog
PET degogging film, power 160-180w, natural aging 20 years

Light color
6000-6500 white, 3000-3200 warm white

Switch type
Touch Sensor Button

Installation methods
Wall mounted and embeded

Voltage
AC110-240,50 60Hz

Warranty
3 years guarantee after delivery

Packing details
Coner protection PE foam protection 5 layers corrugated

carton honey comb carton


Advantages

1. Steel mirror safety explosion-proof

2. Copper-free high definition environmental mirror

3. Intelligent touch, one touch defogging with time display, bluetooth speaker

4. Special anti-corrosion mirror treatment

5. Low energy consumption, long life

6. Damage consumption

7. Fast delivery time

8. Accept customized services, any shape you want can have

Overall size:L180 W130 H80
Light source:LED
Power:3W
Voltage:  5V
Finish:White Stripes/Yellow Stripes/Red Stripes/Orange Stripes/Pink Stripes/Blue Stripes/Green Stripes/Glossy White/Pure Pink
Material:Glass

Type 1: Turbine
The large diameter manual valves and the valves used in high pressure applications come equipped with a reduction gear to ease the operation. Manual valves can also be fitted with a chain wheel and extended stem.

Type 2: Electric actuator
ELECTROMECHANICAL ACTUATORS (E)
The standard electromechanical actuator types are AUMA Norm SA-series and Rotork IQ-series actuators equipped with build-in limit switches and manual handwheel. The standard voltage is 380V 50Hz, others on request.

Type 3:
Electromechanical actuator
Electric linear actuator
Electromechanical actuator with electronic positioner (EO)
The standard actuators are Auma Norm SA-series with RWG, Auma Matic SAM series or Rotork IQ-series. The standard incoming signal for the electromechanical positioner is 4-20 mA. All electromechanical actuators are supplied complete with manual override.

Type 4:
Pneumatic actuators
WIDE VARIETY OF PNEUMATIC ACTUATORS (A)
The pneumatic actuator is a double acting cylinder. The standard supply pressure for the pneumatic cylinder is min. 6 bar. The cylinder size is determined according to the process line pressure.
The pneumatic actuator is also available in special materials for aggressive conditions.

Pocket fob wireless kinetic switch application self-powered technology can control the lights, turn on the TV, manage temperature, close the blinds and gates and open the door.
Your valuable assistant
Wireless kinetic switch gives you smart control in the palm of your hand easy to set up, no wires, no batteries. Place it next to your couch or bed so you can control the light and mood without getting up.
No wires no batteries
Completely wireless. Powered by kinetic energy generated from simply pressing the switch.
Easy to carry
The Button is so tiny it can be put and carried around anywhere.
Easy to operate
Control any number of lights or devices as needed in four individually controllable channels, using the smart group function to control all connected lights devices simultaneously.
Pleasant press
Ensures you a press feeling always pleasant. A discree click allows you to have a good feedback.
add switches wherever you like
renovation for adding ambiance to your home
switch the lights off with one click
close the roller shutters from your bed
control a garage door or a gate
Make houses more affordable
You can save energy every with dimmer everytime you use your lights
Electrical energy savings
Turn a wall plug smart and connected
The minimalist solution for garden lighting
Fantastic evening on the terrace

We have following ship spare parts for Sale

Product-Module Alarm

Maker-Selco

Product Code-M300

Feel free to contact us if any requirement on this number

Soft Head Touch Dimmer Table Lamp Rechargeable Silicone Animal Veilleuse Night Light For Kids,Indoor Bedroom Touch Motion Sensor Wall Toilet Light Wireless,children toy

function Bluetooth, remote control, sensor, alarm clock
shape Animal and other shape
Light Color Warm Light and RGB
Power supply USB Charge
style Christmas,birthday gifts

Feature
External type dipole antenna
2.4GHz/5GHz of frequency
SMA Pluginterface
Plastic rod of black
RoHS compliance
Application
2.4GHz/5GHz Wireless Communication
WLAN device, WLAN Router, e.g., AP, PIC Wireless Card
Description
This miniature antenna is designed for 2.4GHz/5GHz applications and can be easily built-in portable devices with MHF processes. It has excellent stability and sensitivity to consistently provide high signal reception efficiency

Brief introduction
HYM750 UHF RFID reader uses R2000 chip, which complies with EPC C1G2
protocol, its working frequency is 840~960MHz,with LBT function. It supports dense
reader working mode(DRM).With standard 12dBi antenna,the reading distance can
reach 24 meters, maximum identifying speed can reach 400/S; with simple power
supply and interface circuit, a high-performance RFID system can be established. It is
suitable for logistics, apparel, medical industry, and complex assets management, etc
Technical Data

No
Item
Technical data
Unit
Remark
1
Fixed current
1.2
A
Max power output
2
Standby current
¡¨¹1
mA
EN pin low level
3
Frequency range
840~960
MHz

4
Default working
frequency
Frequency hopping
MHz
Frequency interval 250KHz
5
Channel bandwidth
¡¨¹250
KHz

6
Frequency hopping
speed
¡¨¹2
s

7
Fixed power
30
dBm

8
Stepping interval
1~2
dB
5~30dBm, adjustable by
software
9
Label protocol
EPC C1G2
/ISO18000-6C


10
Communication
protocol
Asynchronous serial
ports protocol


11
Starting time
¡¨¹50
ms

12
Radio-frequency
power rising time
¡¨¹500
|¨¬s

13
Radio-frequency
power dropping time
¡¨¹500
|¨¬s

14
Adjacent channel
power leaking ratio
¡¨¹-40
dB
¡¨¤1CH
¡¨¹-60
dB
¡¨¤2CH
15
Frequency
stabilizing ratio
¡¨¤10
ppm
-25¡æ~+40¡æ
¡¨¤20
ppm
-40¡æ~+60¡æ
16
Max reading range
24
m
12dBi antenna
17
Multi-tags
>400/s








PCB LAYOUT
Drawing3 Pin connector

interface 1.jpginterface 2.jpg
HYM740c.jpg1_meitu_1.jpg4-port-rfid-uhf-embedded-reader-module-hym750.jpg

Packaging & Shipping
professional delivery .jpgwhy chose us.jpg
Our certificates

Certificate_.jpg
1. Any inquries can be replied within 24hours
2. Professional manufacturer.
3. OEM/ODM available:
we provide the ideal design program as customized;also can provide excellent OEM service to customers. 4. High quality, fashion design. Reasonable &competitive price. Fast lead time.
5. After-sale service:
All products will have been strictly quality checked in house before packing
All products will be well packed before shipping.
All our products have 1 year warranty. And we sure the product will be free from maintenance within warranty period.
FAQ

How to order?
1) Provide your specific requirements and artwork with format of PDF;
2) Quotation; Alien Passive Rfid Tag
3) Confirm to place the order for target product;
4) Our designer will make the bleed on your artwork or do a design according to your requirements;
5) Send you the confirmation draft and a Proforma Invoice;
6) Signed the confirmation draft and send it back, then make payment;
7) Start production after confirmation and payment;



55.9*35.6*9 mm