Find Verified Electric Power Meters Suppliers, Manufacturers and Wholesalers

Condition:

New

Support:

Boschh, Densoo and Delphhi

Model:

CR1000

Type:

Rail Injector Tester

Features:

Modulated driving signal to ensure the safety of the solenoids of the injectors

Injector driving signal Adjustable frequency and pulse width

Short circuit protection for solenoid driving signals

Rich accessories, Fit for Boschh, Densoo and Delphhi injectors

3ADT313900R1501 SDCS-CON-4 Three Phase Control Card

Input Phase : Three Phase
Brand : ABB
Model Name/Number : SDCS-CON-4
Warranty : 1 Year
Part Number : 3ADT313900R1501
Availability : In Stock

Name: single phase electricity meter case
Material: PC, ABS
Can be customized

Name: meter box, meter cabinet
Material: PC, ABS
Can be customized

Feature

* DDSU1877 is used to measure the rated frequency of 50Hz, Rated voltage below 265V, single phase AC smart power.

* Made of fine quality ABS material, impact resistance, heat-resistant, cold-resistant, and with fine insulating effect.

* Alarm when low energy/overload/fraud.

* With RS485, GPRS, 4G, or other communication functions for reading meter and setting parameters.

* The smart meter adopts the special large scale integrated circuit and special technology to ensure the accuracy and reliability of measurement.

* 5+1 bit wide temperature LCD display, real-time display voltage, current, power, total energy kWh.

* Comfortable guide rail installation mode 35-36 mm.

* Calculate total consumption, real-time view of power consumption via mobile phone.

* APP remote control. You can easily control your devices when you leave your home or fast-forward your home, easily control the status of your home device at any time via the mobile APP.

* Long service time by high brightness LED indicator.

* It can realize the functions of automatic tripping when the balance is exhausted.

* After you pay for the electricity, the energy meter could display the remaining electricity.

* It could realize remote manual closing and open the energy meter.

* The Single phase WiFi energy meter will update the Kwh data when disconnect with wifi. It will not lose the historical data if there is a power outage.

Rs 1.2 Lakh / Unit
Minimum Order Quantity: 1 Unit

Voltage V
Fuel Type Gasoline, Diesel
Phase Three Phase
Automation Grad Manual
Frequency 60 Hz
Number of Cylinder 1
Weight 920 Kg
Rated Current Capacity 5000 V A (1 phase / 3 phase)
We are offering Portable Power Generator to our clients

Single phase WiFi energy meter is din rail type smart remote control electric meter. People could easily install it and monitor energy consumption anytime and anywhere by Linshu APP, to control and save energy and get a better and more comfortable life.
Feature
* DDSU1877 is used to measure the rated frequency of 50Hz, Rated voltage below 265V, single phase AC smart power.
* Made of fine quality ABS material, impact resistance, heat-resistant, cold-resistant, and with fine insulating effect.
* Alarm when low energy/overload/fraud
* With RS485, GPRS, 4G, or other communication functions for reading meter and setting parameters.
* The smart meter adopts the special large scale integrated circuit and special technology to ensure the accuracy and reliability of measurement.
* 5+1 bit wide temperature LCD display, real-time display voltage, current, power, total energy kWh.
* Comfortable guide rail installation mode 35-36 mm.
* Calculate total consumption, real-time view of power consumption via mobile phone.
* APP remote control. You can easily control your devices when you leave your home or fast-forward your home, easily control the status of your home device at any time via the mobile APP.
* Long service time by high brightness LED indicator..
* It can realize the functions of automatic tripping when the balance is exhausted.
* After you pay for the electricity, the energy meter could display the remaining electricity.
* It could realize remote manual closing and open the energy meter.
* The Single phase Wi-Fi energy meter will update the Kwh data when disconnect with Wi-Fi. It will not lose the historical data if there is a power outage.

Specification
Name: Single Phase Wifi Energy Meter
Rated current: 5(60) A
Reference voltage: 130V-250V
Frequency: 50 Hz
Pulse frequency: 1000imp/kWh
Installation: 36mm Din Rail
Power rate: 2W/10VA
Item size: 103 * 26 * 70mm/ 4.06 * 1.02 * 2.76 in

High accuracy:
It is a high sensitivity water meter that detects a little flow with R200 high accuracy.

Anti-freezing:
we solved the problem of freeze-break in winter by using unique internal design.

Name Moving Iron Ammeter-Voltmeter

Model Analog meter

Type LY-100Y

Accuracy: class 2.5/1.5
Specification: 30V 50V 75V 100V 120V 150V 200V 250V 450V 500V 600V, if over 600V, meters can be connected potential transformer with secondary voltage 100V

Function Measuring Range Accuracy
DC Voltage 200mV-500V +/-(0.5%+2dgt)
AC Voltage 200V-500V +/-(1.2%+10dgt)
DC Current 200uA-10A +/-(1%+2dgt)
Resistance 200-20MOHM +/-(0.8%+2dgt)
Battery Test 1.5V/9V/12V +/-(2.5%+2dgt)
Diode Test YES
Data Hold YES
Low Battery Indication YES
Back Light YES
Input Impedance 10MOHM
LCD Size 48*16mm
Power Supply 9V Battery (6F22)
Max. Display 1999
Dimensions 130*73.5*35mm
Product Net Weight 156g
Standard Accessories Test Leads, Battery, Manual

Sensitivity: (25 cents (USD)) 60mm; (Iron pipe-tube) 120mm
Operating current: <20mA
Operation Condition: -10~50 ípC below 75% RH.
Battery: 9V (6F22)*1
Dimension: ª¦135mm
Weight: 230g (including battery)

Function Measuring Range Accuracy
DC Voltage 600V +/-1.0%
AC Voltage 450V +/-1.2%
AC Current 20-200-400A +/-2.0%
Resistance 200KOHM +/-1.0%
Diode Test YES
Data hold YES
Buzzer YES
Power Supply (AAA)1.5*2
Max. Display 1999
Dimensions 150*63*28mm
Weight 160g
Standard Accessories Test Leads, Manual.

Model J0408 DC Voltmeter is suitable for students to measure the voltage in a DC circuit in laboratory.
Measuring Range: -1~0~3V -5~0~15V
Accuracy: 2.5%f.s.
Sensitivity:1mA
Dimensions: 138*100*97mm

Model 5050T/1010T Resistance Meter
The Model 5050T/1010T is applicable for measuring insulating resistance of electronic motor cable, voltage transformers, domestic electronic facilities etc.
Model Measuring range
5050T 0~500
1010T 0~1000
Dimensions 205*120*145mm

Range:-50_1200 degree celsius
Accuracy: +/-3%
Low Battery Indication: YES
Overload Protection: YES
Power Supply: 6F22,9V
Max. Display:1999
Dimensions: 105*70*20mm
Standard Accessories: Test Leads, Battery, Manual, Thermocouple wire

Main usages:
Designed for timesharing electricity metering of new or reconstructed single-phase users. With prepayment function, it is particularly suitable to solve payment-collecting difficulties in residential area, organization, factories, mines and schools excite is preferable in promoting the management level at demand side, inducting the users to better power consumption style to improve power efficiency and electric sources collocation.

Main Functions
1.Both-way electric energy metering. Provides precise positive-negative active energy metering and one-way accumulating. Used for power metering and advance purchase of AC single-phase current rated.
2.Advance purchase quantity, preset maximum load-limit and IC card password. IC card transfers data and realizes data including total consumption, remaining quantity, accumulated quantity and total purchases etc.)backward reading.
3.Storage of leave-factory serial number, meter constants, initial data and the user's name and address etc..
4.Alarm and switch off when overload. Alarm at low remaining power to remind user of timely purchasing.

Main Characteristics:
1.High accuracy and import special metering chip. High accuracy, sensitivity and reliability, wide overload endurance, low power consumption, small volume and light in weight; easy installation, convenient auto-control and function expanding.
2.Long service life. With SMT technology and world famous, long-life components employed, its accuracy is not affected by frequency, temperature, voltage and higher order harmonics. Random installation location. No adjustment is needed if it leaves the factory as complete machine. Checkout period can be extended. Hence the workload of Watt-hour Meter testing and checking-out of electric departments is considerably reduced. Obviously better reliability than its similar.
3.Stable operation. Better stability for its wide range working voltage.
4.LED display, bright and clear prevent counter data from Losing at any times.
5.Single-phase,3-phase and multi-functional prepayment Watt-hour Meter can share a single electricity supply system.
6.With meter reading card and a portable computer, once about 1500 meters can be read.

Three Phase Digital Submersible Stater Control Panel With Digital Dry Run Protection, Overload Protection, Short Circuit Protection, Phase Failure Protection, Phase Sequence Protection, Phase Unbalance Protection, Over Voltage Protection, Low Voltage Protection, Water Level On/Off, Cycle Timer On/Off 1min.999min

Thermal mass flow meter

Variable area flow Meters

Features and Benefits
Orifice calculated and processed according to international standard BS7350
Standard device dispense with extra proofread

Applicable Standards
Design standard: BS EN1042,
Face to face standard: BS EN1092

Technical Data
Nominal Diameter:DN65~DN600 (21 2"~24") Nominal Pressure: PN16
Temperature Range: -5C~85C
Suitable for: Water, ethylene glycol, non correction medium, etc.

Three Phase Energy Meter with following features
- Dual Source
- Prepaid Function with inbuilt relays
- Whole Current
- Load Curtailment
- Modbus/RS485 Protocol Communication
- 10-60 Amps

Customization as per requirement also possible

Product: DD28 MECHANICAL kWH METER

Specifications:
Model Number: DD28
Accuracy: Class 2.0
Rated Voltage: 220 Volt
Rated Current: 10(30-40) Amp
Starting Current: 0.5%Ib
Rated Frequency: 50 Hz
Constant: 600 rev/kWH
Power Loss( Under no current): 2W
Meter Base: Black Clock Steel
Meter Main Cover: Non Transparent( Black Cover)
Meter Terminal: Short or Extended
Meter Terminal Material: Copper
Voltage Coil Material: Copper
Current Coil Material: Copper
Wire Protection: The Voltage and current coil connecting wire must be insulated with a cover on it
Magnet: Big Size Magnet suitable for 30 A to balance the rotation of the wheel.
Size and Dia. of Voltage and Current Coil: As per IEC design to bear 30 Amp continuous current
Meter Terminal Size: As per IEC norms with continuous current bearing capacity of 30 Ampere
Meter Register: 5 Digits ( 4 Integer , 1 Decimal)
Meter Bearing: Jewell
Quality: Excellent
Serial Number: Each DD 28 must have serial number on its name plate
Design Standard: GB/T15283-2008 & IEC 521

SM2100 is a high-precision millivolt meter designed for accurate measurement of small voltage signals. This versatile millivolt meter is suitable for both AC and DC applications, making it a reliable choice for various testing scenarios. For AC voltage measurements, the SM2100 functions as an efficient AC millivolt meter, while its digital DC millivolt meter mode ensures precise readings for direct current signals. As a digital millivolt meter, it offers advanced features for enhanced usability and accuracy. Whether you need an AC millivolt meter or a milli voltmeter for specific applications, the SM2100 delivers exceptional performance. Additionally, its compatibility as a millivolt multi meter adds versatility, making it a valuable tool for professionals and enthusiasts alike.



Application

Factory, Lab, R&D institution, Troops, Colleges and Universities



Design Features

1. LED display, dual independent channels

2. Auto/Manual ranging can be selected.

3. Multi display result with different units.

4.Standard interface USB device and optional LAN interface

Flow meter for various medium with request

Acrel ADW series iot based 3 phase industrial meter compared with smart energy meter has the biggest advantage is that it can be controlled by wireless communication and combined with software system to facilitate users to monitor, copy and manage electricity consumption. It can be flexibly installed in the distribution box to realize energy metering, statistics and analysis of different areas and different loads.

ADW Series iot power consumption meter For Sale
wireless communcation, multi function optional, din rail easily mounted, able to connect IOT paltfrom.

ADW Series IOT web energy meterDatasheet

How Does A DW Series energy meter using iot Work?
Acrel ADW Series IOT wifi enabled energy meter has two solutions to work. First, it can be connected to the gateway through RS485, and then the gateway uploads the data in the meter to the IOT cloud platform through 4G signal. The client can monitor the data in real time through PC or mobile APP. Solution 2 is ADW300 directly upload the data in the table to the IOT platform through 4G/WIFI signals, this solution does not need to pass through the gateway, more convenient installation.

Acrel ADW300 wireless acrel energy meter is mainly used to measure three-phase active electric energy of the low-voltage networks. With RS485 communication and 470MHz wireless communication function, our ADW300 4g smart meter is convenient for users to monitor, collect and manage electricity consumption.

Acrel ADW300 3-phase wireless smart energy meter moniter can be flexibly installed in the distribution box to realize the measurement, statistics and analysis of sub-item electric energy of different regions and different loads.

Measurement: 3 Phase voltage, current, power, power factor, etc.

Communication: RS485, LoRa, 4G, WIFI, LoRaWan

Max demand measure

Accuracy: Class 1.0

Acrel ADW300 Wireless Smart Energy Meter Parameters

Acrel ADW300 Wireless Smart Energy Meter Monitor Video

Acrel ADW300 3-Phase Wireless Energy Meter Monitor Diagram

ADL Series Din Rail Energy Meter FAQs

How To Calculate Maximum Demand In Energy Meter?

We will write the maximum demand function into the program of the energy meter, just need to click the button to turn the page to view the maximum demand.

How Energy Meter Calculate Power Factor?

Our 1 phase kwh meter has the function of measuring the power factor, and the corresponding power factor can be directly viewed on the display interface.

How Energy Meter Works?

When the energy meter is connected to the circuit under test, it will sample the voltage, current and other signals on the line to the chip, and then send to MCU through pulse, and then complete the calculation and display of various power parameters.

ADL Series Din Rail Energy Meter Solutions
All types of ADL Series 3 phase kwh meter din rail fits your needs.

For more info about 3 phase power meter modbus contact us.

We can also provide kinds of measure current transformer for sale, if you are interested, please contact us.

An electric meter, or energy meter, is a device that measures the amount of electric energy consumed by a building, tenant space, or electrically powered equipment. Electric utilities use electric meters installed at customers' premises to measure electric energy delivered to their customers for billing purposes

Instruments and apparatus for physical or chemical analysis (for example, polarimeters, refractometers, spectrometers, gas or smoke analysis apparatus); instruments and apparatus for measuring or checking viscosity, porosity, expansion, surface tension or the like; instruments and apparatus for measuring or checking quantities of heat, sound or light (including exposure meters); microtomes Gas Or Smoke Analysis Apparatus.

As a specialized energy meter supplier, Acrel provides a range of programmable energy meters and energy management devices. Acrel power meters and energy management systems are developed for low-voltage distribution systems to support energy-consumption analysis, energy saving, emission reduction, and cost control.

Energy Management Devices for Sale
Power meters for energy management are mainly used to measure complete electrical parameters in circuits. Acrel offers various power meter types that can measure voltage, current, power, power factor, phase angle, unbalance, harmonics, and other parameters.

APM Series Multifunction Meter
î?¢ APM800 Three-Phase Multifunction Power Meter
î?¢ APM801 Three-Phase Multifunction Power Meter
î?¢ APM810 Three-Phase Multifunction Power Meter
î?¢ APM830 Three-Phase Multifunction Power Meter

ADF400L Multi-Circuit Energy Meter

ADL Series DIN Rail Energy Meter
î?¢ Acrel MID ADL200N-CT Single-Phase DIN Rail Energy Meter
î?¢ Acrel ADL200W Single-Phase Wireless Anti-Backflow Meter
î?¢ Acrel ADL400N-CT Single-Phase DIN Rail Energy Meter
î?¢ ADL3000-E Three-Phase Multifunction Energy Meter

ADL Series Prepayment Energy Meter
î?¢ ADL200-NK Single-Phase WiFi Billing Energy Meter
î?¢ ADL300-EY Three-Phase Prepaid Energy Meter
î?¢ ADL100-EY Single-Phase Prepaid Energy Meter

AEW Series Wireless Energy Meter
î?¢ AEW100 Wireless Energy Meter

ADW Series IoT Power Meter
î?¢ ADW200 Wireless Multi-Circuit Energy Meter
î?¢ ADW210 Wireless Multi-Circuit Energy Meter
î?¢ ADW220 Wireless Multi-Circuit Energy Meter
î?¢ ADW300 Wireless Energy Meter

DJSF Series DC Energy Meter
î?¢ DJSF1352-RN DIN Rail DC Energy Meter

DTSD1352-C Solar Inverter Sungrow Smart Meter
Acrel Energy Management Working Principle

Acrel Electrical Monitoring & electric meter protection Device provide solutions for 0.4kv-35kv power distribution system, which include programmable panel energy meter, dc energy meter, remote terminal unit, smart motor protector relay, temperature and humidity controller, directional overcurrent protection relay, wireless temperature monitor, resdual current relay etc. To Guarantee your electricity safety and stability, choose Acrel electrical overload protection devices.

Types Of Electrical Protection & Safety Devices For Sale
Electrical monitoring & electric protective device involves many aspects of the distribution system, include Measurement and monitoring of electrical parameters, Motor protection and alarm, Temperature and humidity monitoring and control of power distribution environment, High precision, fast response, reduce accidents and reduce operation and maintenance costs.

AMC Series Programmable Power Meter
î?¢AMC72L-AI3 Three Phase Programmable AC Ammeter
î?¢AMC72L-AV3 Three Phase Programmable AC Voltmeter
î?¢AMC72L-E4 / KC Three Phase Multifunction AC Power Meter
î?¢AMC96L-E4 / KC Three Phase Multifunction AC Power Meter

DOF6000 Series, with Clamp-on, Portable and Low power comsumption models.
Suitable for Dirty water;
Snesor: It has 6 sensors: conductivity, ultrasonic depth, pressure depth, Velocity, and there have a temperature sensor inside.

Used for enterprises, residential areas, with current 3 x 220/380V. It is capable of prepaid and control overload. Solve default energy charge, prevent pilferage effectively. Control and debug the electric network running. Remote control and IC card prepayment.