Voltage V
Fuel Type Gasoline, Diesel
Phase Three Phase
Automation Grad Manual
Frequency 60 Hz
Number of Cylinder 1
Weight 920 Kg
Rated Current Capacity 5000 V A (1 phase / 3 phase)
We are offering Portable Power Generator to our clients
Stc generators are to be used in town, the countryside, worksites, mountain and pasture lands as a electric power source for lighting purpose, it can also be used as a reserved power source for emergent case.The generators are of drip-poof with rotary field type and with the adoption of harmonic excitation system, that allow your easy operation and simple maintenance.The generators are of three-phase four-wire type, making use of star connection with neutral point.The rated line voltage is 400v.Phase voltage 230v.Frequency 50hz.Power factor 0.8(lag).It can provide 60hz and the other voltage generator according to necessary.
This series generators adopt with the jb/t8981-1999 standard, also accord with the iec34-1 standard.
Environment conditions:
Under the following conditions, the generators could continuously run and output the rated power:
1. Above sea level: not exceed 1000m
2. Cooling air temperature: 258 ~ 313 k
3. Relative air damping:90%
VFP series intelligent three-phase variable-frequency power supply is a new generation with precise and steady ac voltage and frequency, which is developed and manufactured by china's domestic manufacture.
CFP series variable-frequency power source can be used as power supply ideally for high-precision equipment. Cfp series is widely used in special power supply environment for equipment imported for domestic use or export of domestically produced equipment.,
VFP series can simulate various power supply environment around the globe and it is ideal to provide test power supply for the domestic exported equipment.,
VFP series provides stable frequency, high voltage accuracy, fast response, good impact resistance, three-phase voltage self-balancing, and many other advantages.
The portable Three-phase standard power source is suitable for metering departments, power distribution terminals, power management, reactive power compensation devices and enterprise production.
To set up and take the load regulation of voltage, current, phase angle, frequency and power factor, also can be used as AC current source, AC voltage source or power source.
To set 2-128 times of the amplitude and phase harmonics, and it can be added to the base wave in every harmonic output.
Frequency value is adjustable (AB and phase C).
Voltage, current output a wide range, big power, high stability, waveform distortion degree is small.
Strong with load ability, but it can take capacitive, sensibility, resistance of composite type load or load and load regulation is higher than 0.01%.
To apply the 32 bit MPU + DSP + FPGA, powerful flexible.
To use hardware PID, fast response, the change of load will not cause output volatility.
Industrial frequency waves as high as 50000 points a week of the wave kneading, signal output without filter, precise output waveform, the harmonic output precision, harmonic distortion degree is small.
Range switching automatically
To use software calibration, simple operation, stable and reliable.
To have big screen, 320 x 240 LCD display, Chinese or English interface, operating simply.
To have perfect over-current, over-voltage, heat, a shorts-and-opens, overload protection, failure detection automatically.
With RS232 interface, and PC connection
To take place machine software, it can be output through the PC software program.
FEATURES
3s statistical interval, continuously record 168h
Support multi-brand current transformer
Up to 32G data storage space
Record up to 461 power energy parameters simultaneously
Up to 10000 screenshots saved
Support periodic recording function
Up to 3.9M/s USB high-speed transfer
Recording wave
FUNCTIONS
Energy loss calculator: classic active and reactive power measurements, unbalance and harmonic power, are quantified to pinpoint true system energy losses in dollars (other local currencies available).
Power inverter efficiency: simultaneously measure AC output power for power electronics systems.
Power wave data capture: GF438II analyzers capture fast RMS data, show half-cycle and waveforms to characterize electrical system dynamics (generator start-ups, UPS switching etc.).
Waveform capture: GF438II capture 50/60 cycles (50/60Hz) of each event that is detected in all modes, without set-up
Automatic transient GF438II analyzers capture 200 kHz waveform data on all phases simultaneously up to 1000V.
Fully class-A compliant: GF438II analyzers conduct tests according to the stringent international IEC 61000-4-30 class-A standard.
Mains signaling: GF438II analyzer measure interference from ripple control signals at specific frequencies.
Troubleshoot: analyze the trends using the cursors and zoom tools.
Highest safety rating in the industry: 600 V CAT IV/1000 V CAT III rated for use at the service entrance.
Measure all three phases and neutral: with included four flexible current probes with enhanced thin flex designed to fit into the tightest places.
Automatic trending: every measurement is always automatically recorded, without any set-up.
System-monitor: ten power quality parameters on one screen according to EN50160 power quality standard
Logger function: configure for any test condition with memory for up to 600 parameters at user defined intervals.
View graphs and generate reports: with included analysis software.
Battery life: up to 5 hours operating time per charge on Li-ion battery pack.
Especially developed for indication and
supervision of the three-phase circuit. Provide
three-phase active power, reactive power,
power factor measurement and display, can
expand the measurement range, replaces old
analogical meter, reducing installation
manpower and optimizing the used one of
spaces in the panel.
Ideal for protection of three-phase networks is
monitored and generally to own alarm superior
and inferior. Protection of the parameters of
programming by password.
