Find Verified Asphalt Suppliers, Manufacturers and Wholesalers

Feldspar is a naturally occurring anhydrous, inorganic, igneous rock. It is a complex aluminum silicate containing varying amounts of sodium, potassium, and calcium.
They are used as coarse aggregate in the production of asphalt and concrete. In addition, they are also used in the manufacture of enamel, scouring powder and glass.
Our specification is SiO2 69.4%,Al2O3 16.86%,Fe2O3 0.18%,TiO2 0.05%,CaO 0.19%,MgO 0.02%,K2O 10.8%,Na2O 2.43%,
L.O.I (1100 C) 0.3%, Fraction Retained on 75 um sieve 12, Moisture > 0.5, Hardness (Mohs) 7,pH 6.5 ~ 7.
Size As per client requirement
Packing As per client requirement

Size:
- (2-1) mm.
- (4-1) mm

This rubber is certified by FIFA.
- Water resistant, UV resistant and Heat tolerance is 70.
- Lightweight and durable.

- This rubber is recommended for use in Roofing or Road Flooring.
- sport Flooring,
- Automotive industry, construction and Geotechnical/Asphalt Applications

Material: automotive and truck scrap tire
Relative density @ 15 : 02. 0 �± 1.14 gm/cm�³
Color: Black

Silica Sand

Silica Sand is quartz that over time, through the work of water and wind, has been broken down into tiny granules.
Commercial Silica Sand is widely used as a proppant by companies involved in oil and natural gas recovery in conventional and unconventional resource plays. The resource is also used in industrial processing to make everyday items such as glass, construction materials, personal care products, electronics, and even renewable materials.

Industrial sand is a term normally applied to high purity silica sand products with closely controlled sizing. It is a more precise product than common concrete and asphalt gravels.

Bitumen , All Grades

Dolomite as a mineral has very few uses the most common is in the construction industry. It is crushed and sized for use as a road base material, an aggregate in concrete and asphalt, railroad ballast, glass industry also used as refractory, ramming, and fettling material in steel melting shop, and as fluxing material in blast furnace.

GS are one of the major Dolomite producers in Egypt, our Dolomite is characterized by moderate percent of MgO (20 -25%), and up to 28-30% for glass manufacturing
We can supply Dolomite in lumps or powder form, as per the required micron size, and by any quantities, packages and sizes

Russia, Venezuela, Iraq, Iran
TYPE 30/40
40/50
50/60
60/70
80/100
85/100
100/120

CALCIUM CARBONATE
Applications of calcium carbonate:
1. Crushed Limestone.
a) Aggregates (Concrete, Construction, Landscaping, Roadstone & Roof Chippings).
b) Chemical use (Flue Gas Desulphurization, Glass Manufacture, Iron Smelting.

2. Dimensional Stone.
a) Large / Massive (Building and Walling Stone, Monumental Stone, Dimensional Cut Stone & Paving Stones.
b) Ground Calcium Carbonate (GCC).
i. Course to medium ground (Agriculture, Animal & Pet Feeds, Asphalt Filler, Carpet-backing, Ceramics, Mining, Pre-Cast Concrete, Synthetic Floor Tiles, Water & Waste Treatment.
ii. Fine/ultrafine ground (Adhesives & Sealants, Food, Household Products, Paper, Paints, Pharmaceuticals, Plastics & Rubber.

3. Calcined Limestone.
a) Lime (Burnt lime, quicklime).
Aerated Concrete Blocks, Contaminated Land, Calcium Silicate Bricks, Chemicals, Biosolids, Iron and Steel Manufacture, Limewash &, Motor Oil Additives,
b) Hydrated Limestone.
Seawater, magnesia water purification & Swage & Effluent Treatment.
c) Precipitated Calcium Carbonate (PCC).
Paper, Paints, Rubber, Plastics, Food & drinks, Pharmaceutical & Polymers.
d) Calcined Limestone with Clay.
Cement industry.

SRYSTAL MOUNT CO. FOR MINING & SUPPLYING provide all types for calcium carbonates with quality assurance and Commitment to delivery dates.

Egypt is one of the best places which you can find the Highest and purist Quality Silica-sand, CairoMinerals offer Quality Products with Competitive Prices since 2004 but we are not only in the market, you can find many companies in Egypt as well deal with white silica-sand

What is silica sand ?
Silica (SiO2) sand is generally the sand which you can get all over a beach and it also happens to be the most commonly used sand. It is most commonly composed by either crushing sandstone or else it is most commonly taken from natural occurring points or locations, such as beaches and river beds. The fusion point of purest form of silica is 1,760 �°C (3,200 �°F), however the sands which is used for extraction of silica exhibits a lower melting point due to impurities. For casting which requires high melting point, such as steels, at least 98% pure should be used; however for metals having lower melting points, like cast iron and non-ferrous metals, the sand have low purity can be used (between 94 and 98% pure).

Silica-sand happens to be the most commonly used sand because it is found in abundance, and thus it costs low (therein being its greatest advantage). However there are some disadvantages of sand as well. The disadvantages of silica are high thermal expansion, which can result in casting defects in metals having high melting point, and low thermal conductivity, which can very easily result in defective casting. Apart from there that, there comes some more barriers with it. It also cannot be used in sync with some of the basic metals because it will chemically react with the metal, resulting in surface defects. Finally, it releases silica particles during the pour, risking silicosis in foundry workers.

Silica Sand for Sale
Commercial Silica-Sand is most commonly used as a means of proppant by companies which deals in oil and natural gas recovery in conventional and unconventional resource plays. The resource is also utilized in industrial processing to manufacture regular use items such as glass, construction materials, personal care materials, electronics, and even renewable materials.

Industrial sand happens to be a word which normally refers to silica-sand-products having extremely high purity with closely controlled sizing. It generally happens to be a clearer product than common concrete and asphalt gravels.

The name Silica (SiO2) is provided to a handful of minerals solely made up of silicon and oxygen. Mostly it is found in the crystalline state. It is also found in an amorphous form which comes as a result of weathering or plankton fossilization

Silica-sand deposits are generally mined and dig out in open pit processes. Extracted ore is subjected a lot of processing to enhance the silica content by reducing impurities. After that it is dried and sized to manufacture the best sized particle size distribution for the intended application.

Pure Fine powder of various sizes below 1 mm free of steel, textile and any impurities.
This product is used in many applications such as rubberized asphalt, speed bumps, rubber car stopper and as a raw material for reclaimed rubber production. Different sizes can be produced as per clients specifications.

TALC ROCK
Talc has the ability to absorb moisture, oils, odor, serve as a lubricant, and produce an astringent effect on human skin. These properties have made talcum powder an important ingredient in many baby powders, foot powders, first aid powders, and a variety of cosmetics.
Uses of Talc
1 Plastics
It is mainly used as a filler. Increase the stiffness of products such as polypropylene, vinyl, polyethylene, nylon, and polyester .It can also increase the heat resistance of these products and reduce shrinkage.
2 Ceramics
In the manufacturing of ceramics products such as bathroom fixtures, ceramic tile, pottery, and dinnerware. Improve the firing characteristics of the green ware and the strength of the finished product.
3 Paint
Talc is used as an extender and filler in paints. The platy shape of talc particles improves the suspension of solids in the can and helps the liquid paint adhere to a wall without sagging.
Talc an excellent filler in paint because it simultaneously serves to whiten and brighten the paint.
4 Paper
Talc as a mineral filler can improve the opacity, brightness, and whiteness of the paper. Talc also can also improve the paper�¯�¿�½?�?�¢??s ability to absorb ink.
5 Cosmetics and Antiperspirants
Talc is used as the powder base of many cosmetic products. The tiny platelets of a talc powder readily adhere to the skin but can be washed off easily.
Talc�¯�¿�½?�?�¢??s softness allows it to be applied and removed without causing skin abrasion.
The ability of talc to absorb moisture, absorb odor, adhere to the skin, serve as a lubricant, and produce an astringent effect in contact with human skin make it an important ingredient in many antiperspirants..
6 Roofing Materials
Talc is added to the asphaltic materials used to make roofing materials to improve their weather resistance. It is also dusted onto the surface of roll roofing and shingles to prevent sticking.
7 Dimension Stone
A rock is known as �¯�¿�½?�?�¢??soapstone�¯�¿�½?�?�¢?? is a massive variety of talc with varying amounts of other minerals such as micas, chlorite, amphiboles, and pyroxenes.
It is a soft rock that is easy to work, and that has caused it to be used in a wide variety of dimension stone and sculpture applications.
8 It is used for countertops, electrical panels, hearthstones, figurines, statuary, and many other projects.
9 Ground talc is used as a lubricant in applications where high temperatures are involved.
10 It is able to survive at temperatures where oil-based lubricants would be destroyed.
11 Talc powder is used as a carrier for insecticides and fungicides.
12 It can easily be blown through a nozzle and readily sticks to the leaves and stems of plants.
13 Its softness reduces wear on application equipment.

CRYSTAL MOUNT CO. FOR MINING & SUPPLYING (limited) provide talc rock in different types with high quality and commitment in delivery.

We can supply bitumen (asphalt) 60/70 , Iranian origin FOB UAE
With very competitive price
Packed in drums
Payment : L/C or T/T

Please contact us for a detailed offer

Best regards,
Chemist. Rasha Galal

Bitumen 60/70 in Old Barrels
Description
Bitumen 60-70 is high quality penetration grade asphalt derived from crude petroleum reefing. It is dark in colour and possesses waterproofing and adhesive properties. It is substantially non-volatile and softens gradually when heated.

Uses
Bitumen 60 û 70 is used as a binder of mineral aggregates in asphalt concrete and hot laid plant mix for highways, airports, parking areas, driveways and curbs.

Technical data
Test test method results
Penetration @ 25¦c, 100gm, 5sec. 1/10mm astmd-5 60.0-70.0
Softening point by ring and ball method ¦c astmd-36 (min) 48.0
Ductility @ 25 ¦c cm astmd-113 (min) 100.0
Flash point (Cleveland open cup) ¦c astmd-92 (min) 300.0
Viscosity kinematic @ 135 ¦c cst astmd2170 (min) 350.0
Solubility in trichloroethylene %mass astmd-2042 (min) 99.5
ôThin film oven test. (3.2mm).@163¦c.5hrs: astmd1754
Loss on heating %mass (max) 1.0
Penetration of residue % of original ( min ) 52.0
Ductility of residue (@25 ¦c . 5 cm/min) cm ( min ) 50.0

Available quantity
5000 mt monthly
Backing
Bitumen 60-70 In Old drums.
Time of delivery : 45 days for barrel
Delivery : any port all over the world.

Payment method
* by cash
* Issuance confirmed letter of credit at sight Irrevocable transferable Expiry date will be 3 month from date of issuance the letter of credit place Egypt Docs Required
* Original invoice
* Full set of bill of lading.
* Certificate of Egyptian origin
* Packing list
* Weight list
* SGS or any inspection co..

Instruction
* 100 % payment letter of credit at sight.
* Bill of lading showing not clean on board is acceptable
* Bill of lading showing additional cost is acceptable
* Bill of lading showing name of issuing bank in two fields (consignee and notifying) is acceptable
* Freight forwarder bill of lading is acceptable
* Late presentation or stale docs. Are acceptable
* Presentation period 21 days
* Third part docs. Acceptable
* comm. Of the applicant bank will be paid from the applicant and comm. Of negotiation bank will be paid from the benef..
* Our bank swift code nbegegcx
* Language or spelling mistakes are acceptable.

Wood pellets is one type of biofuels, made from compressed organic,it is used for all sorts of Boiler,
die-casting machine, industrial furnace, incinerator, melting furnace,kitchen equipment,drying equipment,
food drying equipment, ironing equipment, paint equipment, road construction machinery and equipment,
industrial annealing furnace, asphalt heating equipment.
Length: 30mm
Diameter: 6mm~8mm
Shape: columnar pellets
Density: 640kg/3, 640±20kg/m3
Calory (J): 4500
Moisture (%): 6.51
Ash Content (%): 1.35
Packaging Details: PE bag /WEAVE BAG / TON BAG

BITUMEN GRADE: 40/50, 60/70 AND 80/100: 80/100
Quantity: min 50,000MT 200,000MT X 12 months with R/E Price: CIF ASWP, Gross $230/Net $222 per MT
FOB Rotterdam/Houston, Gross $220/Net $212 per MT

EXPORT BITUMEN 60/70
Minimum Quantity: 50,000 Metric Tons per Month Maximum Quantity: 200,000 Metric Tons Per Month CIF PRICE: GROSS US $ 300.00 USD / NET US $ 290.00 USD per Metric Tons
FOBPRICE: US$260.00GROSS/US$250.00NETPERMT
Total Commission: US $ 10/BBL, Buyer side $ 5, Seller side $ 5
PORT: Any Safe World Port INSPECTIONS: SGS or Equivalent

Ask about your requirements

Pallets, rolls of 1m w x 10m l

BITUMEN 80/100

TECHNICAL DATA:
SAMPLE NO. SPECIFICATION

Penetraction Grade
MIN.
MAX

Penetraction 25 ¦c (100g.5s)0.1mm
80 100
Penetration (AFTER RTFOT )% of original pen
50
Softening Point (Ring and Ball ) ¦c (NEAT)
45 52
Softening Point (R & B) after loss on heating (5hrs 163 ¦c) ¦c

Softening Point (AFTER RTFOT ) ¦c
45
Flashpoint (Cleveland Open Cup ) ¦c
225
Viscosity at 135¦c (VIRGIN ) cst

Viscosity at 135¦c(AFTER RTFOT) cst
CHANGE
300%
Ductility at 25¦c cm
100
Ductility at 25¦c (AFTER rtfot)cm
75
Specific gravity at 25¦c g/cc
1.00 1.05
Thin Film Oven Test (TFOT) (5hrs at 163¦c)%
0.5
Solubility in Trichloroethylene %
99
Loss on heating (5hrs.163¦c) % max.
0.5
Penetration on residue(100g -5s)% of initial Pen Min.
80

Our product is used as the main structural component in a number of construction products. Flooring, mortars, cement, roofing shingles, asphalt, and other industrial materials all use silica to improve durability and structural integrity. As silica is resistant to weather, wear and corrosion, it is often used as a caulk or sealant.
Our plants have capacity of 100,000 Ton per Month at this phase. We are expanding our plants capacities to reach 1 Million Ton Per month.

We are Royal Egypt the best quality supplier for Silica Sand in Egypt. We supply the top quality Silica Sand all over Egypt with the highest standards. We are expanding our partnership to overseas partners with the best offer in terms of price and quality. Our partners are the core business and their satisfaction is our goal.
Our product is used as the main structural component in a number of construction products. Flooring, mortars, cement, roofing shingles, asphalt, and other industrial materials all use silica to improve durability and structural integrity. As silica is resistant to weather, wear and corrosion, it is often used as a caulk or sealant.

Safety rubber mat
Size: 45 x 90 cm
Thickness: 1.5 : 2.0 cm
Fall height: 60 : 90
Substructure: cement, asphalt
Adhesive: glue
Colors:
Basic: black, red and dark green
Lively: gray, yellow, light green, blue and purple

Safety Rubber Borders
Size: 100 x 10 x 10 cm
Substructure: Cement, asphalt
Adhesive: Glue
Colors:
Basic: Black, red and dark green
Lively: Gray, yellow, light green, blue and purple

Safety Rubber Corners
Size:100 x 9.0 x 9.0 cm
Thickness: 2.5 cm
Substructure: Cement, asphalt
Adhesive: Glue
Colors:
Basic: Black, red and dark green
Lively: Gray, yellow, light green, blue and purple

Safety Rubber Staircases
Size: 32 x 50 cm
Thickness: 2.5 cm
Substructure: Cement, asphalt
Adhesive: Glue
Colors:
Basic: Black, red and dark green
Lively: Gray, yellow, light green, blue and purple

The best solution to sell bitumen liquid & hot . This is called Bitutainer . It can take up to 25 MT .
We can supply any quantity and kind and deliver to anywhere in the world .
You can purchase : in new steel drums 180 kg , in bitutanier 25MT and in Vessel tanker 3000 tons.
just drop me email or send me by what's app and I will respond you with price within 24 hours.

The dolomite powder caters to the needs of various industries like glass, chemical, ceramics, etc. The dolomite powder is acquired by us from the well-known sources to ensure its higher grade. Our dolomite powder is offered at the most competitive prices.

Uses

• Used as a fluxing agent for glass manufacturing, desulfurization, filler, extender, asphalt roofing, plastering, adhesives, and coatings


Ton