Find Verified Welded Wire Mesh Suppliers, Manufacturers and Wholesalers

3D welded wire mesh fence system offers security but without an oppressive and intimidating appearance.

The mesh is 50x200mm, fully welded at every intersection.

The width of the panels suits post centre of approx. 2500mm

Welded wire mesh fence is available in a galvanized finish; in addition they can be colour coated in a wide choice of colors.

height width thickness size
Mesh panel 1.8m 2m/2.5m 4mm/5mm
Square post 1.8m/2m 1.5mm 60mm*60mm
Peach post 1.8m/2m 1.2mm 50mm*70mm70mm*100mm
Round post 1.8m/2m 1.5mm/2mm 48mm/60mm
Hole opening 50mm*200mm , 50mm*100mm
support leg 300mm
Post cap Plastic cap or Steel cap
Clamps Plastic clamps or steel clamp
Bolts&Nuts According to need
Single arm or double arm On request
Tension wire or barbed wire On request
Concertina razor wire On request
Anti-corrosion

Folded security fence panels are fully welded and 100% hot dip galvanized offering great strength , protection against corrosion and an incredibly long product life.

Easy to install

product installation without special accessories the use of propulsion installation , easy to hold grip simple and quick , reduce costs.

Safe fashion

The Folded panels are electric galvanized and can be powder coated any color to provide you with a stylish , and exceptionally long lasting fence

Welded Wire Mesh Is Made Of High Quality Iron Wire Through Automatic Process And Sophisticated Welding Technique, Laid Horizontally And Vertically, Individually Welded At Every Intersection. The End Products Is Level And Flat With Sturdy Structure.

Welded Wire Mesh Is Extensively Used In Industry And Agriculture, Building, Transportation And Mining For All Such Purposes As Poultry Houses, Egg Baskets, Runway Enclosures, Draining Rack, Fruit Drying Screen, Fence.
For Finish,We Can Supply The Following Kinds:
*Hot-Dipped Galvanised After Welding
*Hot-Dipped Galvanised Before Welding
*Eletric-Galvanised Aftre Welding
*Electric-Galvanised Before Welding
*Pvc-Coated
*In Stainless Steel

Standard Mesh IN ROLL OF 5M,10M,25M,30M AND 45M LONG AND 0.5M-1.8M WIDE

MESH

Wire Gauge

Inch

MM

(BWG)

1/4*1/4

6.4MM*6.4MM

22, 23, 24-25

3/8*3/8

10.6MM*10.6MM

19, 20, 21, 22

1/2*1/2

12.7MM*12.7MM

16, 17, 18, 19, 20, 21, 22, 23, 24

5/8*5/8

16MM*16MM

18, 19, 20, 21

3/4*3/4

19.1MM*19.1MM

16, 17, 18, 19, 20, 21

1*1

25.4MM*25.4MM

14, 15, 16, 17, 18, 19, 20

Packing:
Each Roll Packed By Water Proof Paper
Each Roll Shrink Wrapped
Other Packing Method May Be Accepted After Confirmation
Other Sizes Be Produced After Confirmation

3D welded wire mesh fence system offers security but without an oppressive and intimidating appearance.

The mesh is 50x200mm, fully welded at every intersection.

The width of the panels suits post centre of approx. 2500mm

Welded wire mesh fence is available in a galvanized finish; in addition they can be colour coated in a wide choice of colors.

height width thickness size
Mesh panel 1.8m 2m/2.5m 4mm/5mm
Square post 1.8m/2m 1.5mm 60mm*60mm
Peach post 1.8m/2m 1.2mm 50mm*70mm70mm*100mm
Round post 1.8m/2m 1.5mm/2mm 48mm/60mm
Hole opening 50mm*200mm , 50mm*100mm
support leg 300mm
Post cap Plastic cap or Steel cap
Clamps Plastic clamps or steel clamp
Bolts&Nuts According to need
Single arm or double arm On request
Tension wire or barbed wire On request
Concertina razor wire On request
Anti-corrosion

Folded security fence panels are fully welded and 100% hot dip galvanized offering great strength , protection against corrosion and an incredibly long product life.

Easy to install

product installation without special accessories the use of propulsion installation , easy to hold grip simple and quick , reduce costs.

Safe fashion

The Folded panels are electric galvanized and can be powder coated any color to provide you with a stylish , and exceptionally long lasting fence

Welded Mesh from Armstrong Wires and Engineers comes in different Various forms and sizes Inquiries are welcome

Application
Hongcong gasoline welding-cutting machine features an energy-saving rating over 80%, namely, 3 liter gas consumed in the machine equals to that of 1 bottle£¨40liter£©of acetylene, while the operation is the same to the acetylene torch with a higher performance, the fire may reach 2800-3000¡æ (adjustable) via mixture of aero explosion-proof material, atomized quadratic nanometer gasoline molecule and oxygen molecule, and available to cut steel, cast iron, stainless steel, cast aluminum, wrought aluminum and copper material. Hongcong gas welding-cutting machine also characterizes an easy operation, high speed, smooth welding, tiny cutting seam, flat slot, no slag, no flashback with an extensive cutting thickness between 0.5-400mm to eliminate the danger in operation, high cost, low efficiency, heavy waste and severe pollution of the acetylene torch. Hongcong gasoline welding-cutting machine has been ever more extensively used in iron & steel, shipbuilding, railway, petroleum, metallurgy, mining, machinery and other manufacturing industries to rate a longevity up to 15 years, it also features easy operation, explosive-proof installation, fine cutting, speed welding and cutting, convenient and extensively-adopted.
Packing list
HCQZ30 type Handgrip gasoline cutting torch¡­¡­¡­¡­¡­1pcs
HCQZ30 type cutting nozzle 1#~3#..................................... 3pcs
3 cutting nozzles:
1#- can cut steel sheet 3~10mm thickness
2#- can cut steel sheet 10~20mm thickness
3#- can cut steel sheet 20~40mm thickness
HC20-1 type handgrip welding torch¡­¡­¡­¡­¡­¡­¡­¡­¡­1pcs
HC20 welding nozzle(1#~3#)¡­¡­¡­¡­.¡­¡­¡­¡­¡­¡­¡­..1set
11Liter gasoline tank explosion-proof¡­¡­¡­¡­¡­¡­¡­¡­..1pcs
10m oil-resistant and fire proof rubber hose (optional longer add $2.00 per meter)
A tool box with relational tools and spare parts
Instruction and certification and Warranty sheet

Optional configuration
1- HCQZ100 type Handgrip gasoline cutting torch 1pcs with 3 cutting nozzles (cut range 30~100mm)
2- HCQZ300 type Handgrip gasoline cutting torch 1pcs with 4 cutting nozzles (cut range 100~300mm)
3- HC-50 type semi-automatic cutting torch 1pcs without nozzle
(Which can be refitted to the acetylene semi-automatic cutting machine of Chinese standard instead the acetylene cutting torch.)
4- HC-80 type profile cutting torch 1pcs without nozzle
(Which can be refitted to the acetylene CNC cutting machine of Chinese standard instead the acetylene cutting torch.)
5- HC-60 type Handgrip gasoline heating torch 1pcs with 2 cutting nozzles (hard flame and soft flame)
6- Nozzle

Oxy-gasoline handgrip cutting machine

Packing list:
A gasoline handgrip cutting torch ff qz30optional+
A gasoline handgrip cutting torch ff qz100optional+
A gasoline handgrip cutting torch ff qz300+
An explosion suppression gasoline tank;
10 meters oil-resistant rubber hoselonger hose optional;
4 cutting nozzles:
Qz30-1- can cut steel sheet 3~10mm thicknessoptional
Qz30-2- can cut steel sheet 10~20mm thicknessoptional
Qz30-3- can cut steel sheet 20~30mm thicknessoptional
Qz100-1- can cut steel sheet 20~40mm thicknessoptional
Qz100-2- can cut steel sheet 40~60mm thicknessoptional
Qz100-3- can cut steel sheet 60~100mm thicknessoptional
Qz300-1- can cut steel sheet 100~150mm thickness
Qz300-2- can cut steel sheet 150~200mm thickness
Qz300-3- can cut steel sheet 200~250mm thickness
Qz300-4- can cut steel sheet 250~300mm thickness
A set tip drills;

Packing list:
A gasoline semi automatic cutting torch·
An 10liters explosion suppression gasoline tank(No semi automatic car and track, the userf+s original acetylene semi-automatic roadster can still be used);
10 meters oil-resistant rubber hose·+longer hose
4 cutting nozzles:
* can cut steel sheet 3~10mm thickness·
* can cut steel sheet 10~20mm thickness·
* can cut steel sheet 20~30mm thickness·
* can cut steel sheet 20~40mm thickness·
* can cut steel sheet 40~60mm thickness·
* can cut steel sheet 60~100mm thickness·
* 0-1#- can cut steel sheet 100~150mm thickness
* 0can cut steel sheet 150~200mm thickness
* 0can cut steel sheet 200~250mm thickness
* 0-4#- can cut steel sheet 250~300mm thickness
A set tip drills;
A set o-ring·+spare parts·
Instruction;
A set certification.
Performance Overview
Thank you for your identify purchased the TONGTAI gasoline welding & cutting machines by your talents, the products have significant energy-saving effects and excellent cutting performance, itf+s magic laminated cutting, underwater cutting, drilling on the thick plate and other features are no matched by other flame cutting:
* Easy operation: No electricity, no pressure in gasoline tank, overcome the tedious work before using.
* Good cutting quality: The cutting slotted smooth, no undercut and burning sink in upside, no nodulation and no hung bits in downside.
* Small heat-affected zone: Particularly for carbon steel, itf+s cut surface will not appear hardening phenomenon, so greatly reduced processing difficulties of under procedures.
* It can cut layers, a dozen stacked with the plate, the cutting speed is same with the same thickness of the plate and can cut 10 mm thickness laminated steel which is the product of a magical function, but need to choice bigger a size than the normal cutting nozzle, it is because gasolinef+s weight is four times than acetylene gasf+s. The secondary combustion was generated on the lower surface of the plate when cutting.
* As long as the bigger preheating flame was choice, this product can smoothly cut the plate even which was very dirty on the surface (rust, paint, concrete, etc.).
* The thick steel sheet can be punched security and fast, the most depth is up to250 mm thickness.
* The combustion tube is not backfire.
* Can press the igniting torch nozzle on the plate surface and immerse in water, it will not be extinguished.
* Itf+s normal working temperature range is -40 f¦ to 50 f¦.
* A cutting torch and cutting nozzle with cooling water can cut high temperature steel plate.
Metal welding & cutting revolution
Dear customer:
If you are using the expensive acetylene gas to cut or weld the metal, here I recommend my company's energy-saving products to you.
Patent (Patent No.: 992098149)
Through the National Machinery

Spare Parts Of Tig & Mig Welding Machines

1 BlackBEAR ARC 200
2 BlackBEAR ARC 250
3 BlackBEAR ARC 300
4 BlackBEAR ARC 300L
5 BlackBEAR ARC 300HD
6 BlackBEAR ARC 400
7 BlackBEAR TIG 200
8 BlackBEAR TIG 300
9 BlackBEAR TIG 400
10 BlackBEAR TIG AC/DC 200P
11 BlackBEAR MIG 250
12 BlackBEAR MIG 400
13 BlackBEAR MIG 500 PRO

Welding Machine

Price : Rs 7 Lakh / Unit
Minimum Order Quantity: 1 Unit

Brand : Ador
Output Current : 300-400 A
Diesel Engine Welding Set (Skid Mounted) Power source coupled with simpson make water cooled Diesel Engine Along With A) Output Socket (Built in Machine Front Panel) B) Remote Control Unit (10 Mtrs) C) Uncharged Battery (12 V) D) Engine Starter Key E) Tool Kit

Miller Dimension 652 Three Phase Multiprocess Welder Welder

Machine - 567250
Meter Reading - Not Available
Region - West South Central
Asking Price - $2,750
Description - MILLER DIMENSION 652 WELDERS - MIG/TIG - Over 200 units available - Special pricing on 5 or more units - Refurbished--------------------------------------------------- FULL MACHINE DESCRIPTION - Miller Dimension 652 welders, MIG/TIG Welders, and Miller Suitcase X-treme 12Vs Wire Feeders. â?¢ All units (power source and feeder) are tested and calibrated by SWAT in Rockdale, TX (a certified Miller repair facility)
Any repairs needed are done by SWAT Package comes with a Dimension 652 power source, a Miller Extreme 12Vs wire feeder for $2750.00 welding guns and gougers available as well. ------------------------------------------------------------------------------------- PRODUCT LINKS Below is a detailed video of how we get this equipment Job Ready and some additional pictures: http://rhinomachinery.com/welders/en/index.html --------------------------------------------------------------------------------------------- PRICING --Power Source - tested and serviced by a certified Miller Repair facility; Individual and small package price is $2250 --Miller Extreme 12VS Suitcase wire feeder - tested and serviced by a certified Miller Repair facility, Individual and small package price is $900 --We have remotes, guns and gougers available as well. We also have a panel line, plate rollers, and 230 ton to 825 ton Manitowoc crawler cranes available. ----

MIG, TIG, Brazing, Spot, Resistance, Stud, & Projection welding to weld Mild steel, Stainless steel, Galvanized steel, Copper & Aluminium alloys.

Semi-automatic N95 mask sealing machine is composed of a mask sealing frame, welding mold and ultrasonic welding unit.

Welding is one of the most critical operations in fabrication of sheet steel fabrication of assemblies. To some extent the strength of the assemblies depend on the quality of welding. Hence, we take utmost care in welding operation.

We have wide range of welding equipments of reputed brands like L&T, Esab & Mogora Cosmic. We can carry out different types of welding depending on the type of fabrication. The availability of such varied equipments ensures that we meet all your welding needs.

MIG/MAG/TIG, Projection Welding, CO Welding, Arc Welding

Make: Mogora Cosmic, ESAB, L&T

Earth Clamp

Amperage: 400
Cable Size: 95 mm2
Jaw: Brass/Copper
Shunt: Copper.

Welding Electrode Holder


Amperage: 600
Electrode Size: 6.3 mm
Cable Size: 95 mm2
Main Body: Brass.

Auto Darkening Helmet

Technical specifications:
Filter Dimension: 100x90x10 mm
Shade: 4/9 - 13 (out side adjuster)
Viewing Window: 98x43 mm
Response Time: 0.1ms
Sensitivity: Adjustable
Ultra Voilet Protection: <0.0001% (210 - 365 nm)
Infrared Protection: 0.01% (780 - 2000 nm)
Delay Time: 0.3 TO 0.7 sec (auto regulated)
Battery: Lithium (Chargeable) with Solar Cell
Operating Temp.: -5 to 55.

Welding Electrode Oven

Technical Specifications:
Capacity: 225kg
Voltage: 415V, 50Hz, 3 Ph
Kilo-Watts: 5.8 Kw 3 tubular Heater of 1.6 KW
Electrode length: 18"
Temperature: 50-450¦C (selectable) with DRO
Inner Body: All inner parts of Stainless Steel,
Construction: Heavy duty, pressed sheet metal, Square shape,
Number of shelve: Three Stackable
Insulation: 50mm Fibre Glass Blanket type
Thermocouple: K type with digital Pre set digital controller

Special Feature:
* Overload Cut off
* Indicator Light
* Used for C.S & SS Electrode
* Calibration port
* Capillary Type thermostat in Electrical Panel for safety.
* Vent
* Spring Loaded Door Handle.

Gouging Torch

Amperage: 1000
Electrde Size: Round - 4 -12.7 mm, Flat - 9.5 - 15.9 mm
Main Body: Brass
Cable: Copper.

BX1-C Technical Specification
Single-phase, on-portable, fan-cooled stick electrod welding machines for mma welding in alternating current (ac) stepless regulation of welding current withthemostatic protection. Use the normal welding rod.
this welder has two kinds, one can only working under the 220v only, the another can not only working under 220v but also under 380v (this is abnormal use)

Product Name: Welding

Detailed product parameter description:

Product model: Welding Our company has multiple DC welding machines, AC welding machines and argon arc welding machines, which can weld various steel structures, steel processed parts, and perform high-quality welding of various stainless steels, high-alloy steels, and non-ferrous metals. We welcome supplied materials for processing.

Spot welding machine, since we started our business as SJ Tech in July of 2017.

Bidirectional automatic welding machine, since we started our business as SJ Tech in July of 2017.

"* Power ON self-test (POST). when machine switched on , the system does full inspection and testing on welder conditions, that protect components especially key components like IGBT, diode , capacitors , circuit board, etc .
* Full functions with thermal protection , over load protection , anti-stick , arc force , VRD .
* Suitable for a wide range of voltage from 160V-260V .
* Energy saving . if the welder not in use for few minutes , the welder will automotically swtich to sleep mode . if still not use after sleep mode , the welder will swtich off automatically .
* Can be used to welder acid electrode rod and alkaline (basic ) electrode rod .
* Accessories 200A electrode holder+16mm*1.6M 200A earth clamp+16mm²*1.3* CABLE CORD SIZE / LENGTH: 3*1.5mm² , OUTSIDE 1.6M ;VDE euro two pins plug COPPER CABLE
* Output cable size/length: 16mm²*1.6M 16mm²*1.3M
* DUTY CYCLE: 60%
* Usable electrode (mm): 1.6-4.0mm
*FREQUENCY: 50/60Hz
* VOLTAGE: AC 160-260V
* Output current range (A): 20-300
* POWER: 5.5KW
* CE Standard

"* Digital displayer
* Thermal protection
* Built-in arc force
* Anti-stick
* Hot start
* 200A electrode holder+16mm²*1.6M
* 200A earth clamp+16mm²*1.
* Face mask Brush
* CABLE CORD SIZE / LENGTH: 3*1.5mm² , OUTSIDE 1.2M ;VDE euro two pins plug COPPER CABLE
* Output cable size/length: 16mm²*1.6M 16mm²*1.3M
*DUTY CYCLE: 30%
* Usable electrode (mm): 1.6-4.0mm
* FREQUENCY: 50/60Hz
* VOLTAGE: AC 220-240V
* Output current range (A): 20-250
* POWER: 5.0KW
* CE Stander "

"1.Power ON self test (POST). when machine switched on , the system does full inspection and testing on welder conditions , that protect components especially key components like IGBT , diode , capacitors , circuit board , etc .
2. Full functions with thermal protection , over load protection , anti-stick , arc force , VRD .
3. Suitable for a wide range of voltage from 160V-260V . 50-60 Hz
4. energy saving . if the welder not in use for few minutes , the welder will automotically swtich to sleep mode . if still not use after sleep mode , the welder will swtich off automatically .
5.can be used to welder acid electrode rod and alkaline (basic ) electrode rod .
Accessories 200A electrode holder+25mm²*1.6M
300A earth clamp+25mm²*Brush
6.Product power: 6.5 KW
Output cable size/length: 25mm²*1.6M 25mm²*1.3M
CABLE CORD SIZE / LENGTH:3*2.5mm² , OUTSIDE 1.6M ;VDE euro two pins plug COPPER CABLE"

"*Digital displayer
*Thermal protection
* Built-in arc force
* Anti-stick hot start
* 200A electrode holder+14mm²*1.6M
* 200A earth clamp+14mm²*1.3M
* Face mask, Brush
* CABLE CORD SIZE / LENGTH: 3*1.5mm² , OUTSIDE 1.2M ;VDE euro two pins plug COPPER CABLE
* Output cable size/length: 14mm²*1.6M 14mm²*1.3M
* DUTY CYCLE: 60%
* Usable electrode (mm): 1.6-3.2mm
* FREQUENCY: 50/60Hz
* VOLTAGE: AC 220-240V
* Output current range (A): 20-200
* POWER: 4.5KW
* CE Standard

Welding machines
- Mig welding
- Tig welding
- Stick welding
- Welding machine accessories
- Multi-process Welders

- One-touch fastening with integral structure Cooling effect by -CO2 gas flow

- Reduced failure rate by more than 50%

* It works in connection with the main body of welding machine and the power line communication. An extra power line is not necessary.

Adaptor Terminal Time
General Welding - 60 Minutes
All in one adaptor - 10 Minutes

Cooling Type
General Welding - Natural air - conditioning
All in one adaptor - Forced air - conditioning
* Shape of terminal

General Welding - Fork-type structure
All in one adaptor - Straight line - type structure

Length of terminal handling
General Welding - 1 ~ 2M
All in one adaptor - Within 10cm

Connection type
General Welding - 3 Step individual connection
All in one adaptor - 1 Step Simultaneous connection

The height and rim diameter of the cup can be customized according to your requirements.

Ultrasonic welding machine manufactured by Suzhou Jfortune Precision Machinery Co., Ltd. for welding plastic parts. The machine uses ultrasonic vibrations to join thermoplastic components, and is suitable for automotive plastic parts and other plastic products. CE certified. We have been exporting since 2010 and serve customers including Mercedes-Benz, BMW, Audi, Volkswagen and General Motors.

1. Rapid spot welding, especially suitable for thin
2. Smart control, synergic adjustment
3. The weld seam is full, smooth and beautifully formed
4. With manual welding, can weld galvanized sheets and stainless steel
5. Concentrated current, strong penetration, and good penetration
6. The arc is soft and the arc starting easily
7. Accurate control of current waveform and good arc stability
8. Many function adjustments, various welding parameters can be preset
9. High-power and high-speed wire feeding motor the 5-meter welding gun can still feed wire quickly

Application
Hongcong gasoline welding-cutting machine features an energy-saving rating over 80%, namely, 3 liter gas consumed in the machine equals to that of 1 bottle£¨40liter£©of acetylene, while the operation is the same to the acetylene torch with a higher performance, the fire may reach 2800-3000¡æ (adjustable) via mixture of aero explosion-proof material, atomized quadratic nanometer gasoline molecule and oxygen molecule, and available to cut steel, cast iron, stainless steel, cast aluminum, wrought aluminum and copper material. Hongcong gas welding-cutting machine also characterizes an easy operation, high speed, smooth welding, tiny cutting seam, flat slot, no slag, no flashback with an extensive cutting thickness between 0.5-400mm to eliminate the danger in operation, high cost, low efficiency, heavy waste and severe pollution of the acetylene torch. Hongcong gasoline welding-cutting machine has been ever more extensively used in iron & steel, shipbuilding, railway, petroleum, metallurgy, mining, machinery and other manufacturing industries to rate a longevity up to 15 years, it also features easy operation, explosive-proof installation, fine cutting, speed welding and cutting, convenient and extensively-adopted.

Packing list
HCQZ30 type Handgrip gasoline cutting torch -1pcs
HCQZ30 type cutting nozzle 1#~3#..................................... 3pcs
3 cutting nozzles:
1#- can cut steel sheet 3~10mm thickness
2#- can cut steel sheet 10~20mm thickness
3#- can cut steel sheet 20~40mm thickness
HC20-1 type handgrip welding torch¡­¡­¡­¡­¡­¡­¡­¡­¡­1pcs
HC20 welding nozzle(1#~3#)¡­¡­¡­¡­.¡­¡­¡­¡­¡­¡­¡­..1set
4Liter gasoline tank explosion-proof¡­¡­.. ¡­¡­¡­¡­¡­¡­..1pcs
4Liter aluminum alloy oxygen cylinder¡­¡­ ¡­¡­¡­ ¡­¡­1pcs
Oxygen pressure relief valve¡­¡­¡­¡­¡­¡­¡­¡­¡­¡­¡­¡­.1set
5m oil-resistant rubber hose (optional longer add $2.00 per meter)
A tool box with relational tools and spare parts
Instruction and certification and Warranty sheet

Optional configuration
1- HCQZ100 type Handgrip gasoline cutting torch 1pcs with 3 cutting nozzles (cut range 30~100mm) adds $39.99
2- HCQZ300 type Handgrip gasoline cutting torch 1pcs with 4 cutting nozzles (cut range 100~300mm) adds $39.99
3- HC-60 type Handgrip gasoline heating torch 1pcs with 2 cutting nozzles (hard flame and soft flame) add $38.99
4- Nozzle per one add $4.99
Shipment
UPS Worldwide Expedited discounted price to USA $195.00
DHL Worldwide Expedited discounted price to USA $165.00(recommendation)

PLS CONTACT ME IF YOU ARE OTHER COUNTRY, SO I WILL SELECT THE SECURITY AND CHEAPER EXPRESS FOR BUYER.

AGENT: We seek the business agent in the world, who wish to join, are welcome to my company to negotiate or by email to consult.

32 bitmicom of STM32 series is used so it is possible to realize perfect digital control fast.

Monitoring overheat, over current and over voltage by microprocessor, Input power disconnection protective circuit built in.

Stable output is maintained even at +_15% change in input power.

Parameter is applied at the time of arc starting and closing, so soft arc is made and neatly welded .

Digital current and voltage feedback circuit is applied so a stable bead pattern is realized.

Interface, which can transmit the welding conditions by wire or wireless on a real - time basis, is built in it so it is possible to monitor on a real time basis.

The time of using welding machine is saved in the main PCB by situation and the function of managing welding facilities is built in it.

A power socket for the connection of a working light in a wire feeder is available so it is convenient to work at night.

Wedge wire screen panels with continuous slots for screening, dewatering, and intake protection. Slot opening, panel size, and support rods can be matched to drawing. Suitable for water, mining, and industrial screening. Price negotiable. MOQ 50. Lead time negotiable. Custom packing. Custom OEM available. Specs per inquiry.

Johnson wedge wire screen tubes with continuous slot openings for liquid-solid separation, well screens, and process filtration. Slot size, diameter, and end fittings can be matched to drawing. Suitable for water, mining, and industrial intake service. Price negotiable. MOQ 50. Lead time negotiable. Custom packing. Custom OEM available. Specs per inquiry.

Conical wedge wire screen basket, also known as Johnson screen, is welded from stainless steel profile wire and support rods. The uniform V-shaped slot delivers high filtration accuracy and excellent self-cleaning performance.
Its tapered design is ideal for centrifugal separation, facilitating fast material discharge. We can customize slot size, diameter, height and material (SS304, SS316L) according to your requirements.
Widely used in solid-liquid separation for wastewater treatment, pulp & paper, mining, chemical and food industries.

Traditional Welding in Furniture Manufacturing
https://www.jybwelding.com/furniture-welding-factory/welding-automation-solution-for-furniture-industry.html

Pain Points of Traditional Welding in Furniture Manufacturing

Traditional welding operations are plagued by several industry-wide pain points, which have become major obstacles to the production, operation and development of enterprises:


1.Severe labor turnover & difficulty in recruiting welders

Welding work features harsh working conditions with occupational hazards such as arc light and fumes, making it hard to attract young practitioners. Senior welders are prone to resignation, leaving enterprises with a perennial labor shortage and great difficulty in both recruiting and retaining welders.


2.High training investment & long onboarding cycle

Welding is a skilled trade with strict requirements for operational proficiency. New employees need long-term practical training to be competent for the job. The training process incurs huge consumption of consumables and equipment wear, leading to persistently high time and capital costs for talent development.


3.Unstable welding quality & lack of unified standards

Welding quality is entirely dependent on welders' personal experience and operational state, with human factors exerting a tremendous impact. Obvious quality differences exist between operations by different welders or the same welder at different times, failing to form a standardized welding quality system.

No-Code Teaching Welding Robot
https://www.jybwelding.com/8-axis-automatic-welding-machine/yb-08-jc.html

YB-08-JC No-Code Teaching Welding Robot
This system supports eight-axis linkage, enabling precise adaptation to the welding requirements of various complex weld seams, with particularly outstanding performance in thin plate welding. Utilizing a square track combined with lead screw and rack transmission, it offers higher rigidity and motion stability compared to the belt drive of traditional robotic arms, achieving high inertia and zero-error welding, thus significantly improving yield. Structurally, it adopts a Cartesian configuration, leveraging its linear motion characteristics, resulting in significantly superior rigidity compared to articulated robots with multiple joints connected in series. This effectively suppresses posture errors and vibrations, ensuring a stable and reliable welding process.

https://www.jybwelding.com/news/a-list-of-best-10-robotic-welding-company-brands.html

Robotic welding has transformed modern manufacturing by improving welding accuracy, production efficiency, and operational consistency. From automotive production to heavy machinery, metal fabrication, aerospace, and furniture manufacturing, robotic welding systems help manufacturers reduce labor costs while increasing productivity and weld quality.

Below is a list of 10 leading welding robot manufacturer brands recognized for their technology, reliability, automation capabilities, and industry applications.

1. FANUC
FANUC is one of the worldâ??s best-known industrial robotics manufacturers, offering highly reliable robotic welding solutions. Its Arc Mate robotic systems are widely used for arc welding, spot welding, and automated manufacturing.

Key strengths:

High reliability and long service life
Strong global service network
Advanced welding precision and motion control
Widely adopted in automotive manufacturing

Furniture Welding Factory
https://www.jybwelding.com/furniture-welding-factory/

In modern furniture manufacturing, welding is a key process that directly determines product strength, appearance quality, and production efficiency. As market demand shifts toward higher consistency, faster delivery, and lower labor dependency, welding robots for furniture factories have become an essential solution for automated metal furniture production.

Our welding robot systems are specifically designed for COâ?? gas shielded welding and laser welding, making them ideal for metal frame furniture production lines that require stable quality and scalable output.



Why Furniture Factories Need Welding Robots


Traditional manual welding in furniture production often faces several challenges:

Inconsistent weld quality between operators
High labor cost and skilled welder shortage
Slow production speed for batch orders
Deformation issues in thin metal structures
Difficult quality control in large-scale production
Welding automation solves these problems by ensuring stable, repeatable, and efficient production.

YB-06-KS 6-Axis Industrial Robotic Arm
https://www.jybwelding.com/6-axis-automatic-welding-machine/yb-06-ks.html

YB-06-KS 6-Axis Industrial Robotic Arm
The dual-station rotary welding system achieves seamless welding process integration through precise coordination between the robotic arm and the worktable. This system integrates complex processes such as overhead welding, flat welding, and reverse flow welding into a highly efficient three-dimensional welding operation, ensuring not only a single weld joint but also neat and aesthetically pleasing weld bead formation. While improving production efficiency, it also guarantees high-quality processing under complex processes, truly achieving simultaneous improvement in efficiency and quality.

Laser plastic welding machine manufactured by Suzhou Jfortune Precision Machinery Co., Ltd. for welding plastic parts. The machine uses a laser beam to join thermoplastic components, and is suitable for automotive plastic parts and other plastic products. CE certified. We have been exporting since 2010 and serve customers including Mercedes-Benz, BMW, Audi, Volkswagen and General Motors.

Hot plate welding machine manufactured by Suzhou Jfortune Precision Machinery Co., Ltd. for welding plastic parts. The machine uses a heated plate to melt and join thermoplastic components, and is suitable for automotive plastic parts and other plastic products. CE certified. We have been exporting since 2010 and serve customers including Mercedes-Benz, BMW, Audi, Volkswagen and General Motors.