Find Verified Copper Coils Suppliers, Manufacturers and Wholesalers

Classification : Copper Coil
Copper coil is a highly stable, low maintenance roofing and curtain wall material that is environmentally friendly, safe to use, easy to process and highly resistant to corrosion. Copper coil classification: aluminum bronze coil, brass coil, beryllium bronze coil, tungsten copper coil, copper coil and so on.

Commonly used copper coil brands: H62, H65, H68, H70, H80, H90, C2600, C2680, C2700, C5210, etc.

Classification : Copper Coil
Copper coil is a highly stable, low maintenance roofing and curtain wall material that is environmentally friendly, safe to use, easy to process and highly resistant to corrosion. Copper coil classification: aluminum bronze coil, brass coil, beryllium bronze coil, tungsten copper coil, copper coil and so on.

Commonly used copper coil brands: H62, H65, H68, H70, H80, H90, C2600, C2680, C2700, C5210, etc.

Classification : Copper Coil
SGS Copper coil is a highly stable, low maintenance roofing and curtain wall material that is environmentally friendly, safe to use, easy to process and highly resistant to corrosion. Copper coil classification: aluminum bronze coil, brass coil, beryllium bronze coil, tungsten copper coil, copper coil and so on.

Commonly used copper coil brands: H62, H65, H68, H70, H80, H90, C2600, C2680, C2700, C5210, etc.

High purity Pure Copper Foil / strip / Tape For PWE(PCE) using
99.9% Pure copper tape / strip / foil
Cu%99.90 C11000 Cu ETP
Min thickness:0.001mm
little order can accept
Specification of red copper strip we supply:
Strip: thick:0.15-3.0mm width:610mm
Plate:thick:0.5-3mm width:610mm Length:2500mm

High purity Pure Copper Foil / strip / Tape For PWE(PCE) using
99.9% Pure copper tape / strip / foil
Cu%99.90 C11000 Cu ETP
Min thickness:0.001mm
little order can accept
Specification of red copper strip we supply:
Strip: thick:0.15-3.0mm width:610mm
Plate:thick:0.5-3mm width:610mm Length:2500mm

High purity Pure Copper Foil / strip / Tape For PWE(PCE) using
99.9% Pure copper tape / strip / foil
Cu%99.90 C11000 Cu ETP
Min thickness:0.001mm
little order can accept
Specification of red copper strip we supply:
Strip: thick:0.15-3.0mm width:610mm
Plate:thick:0.5-3mm width:610mm Length:2500mm

Copper Coils :

Incredible gaugecontrol
More concentric andconsistent tube
Bigger/virtuallydefect-free coils
Improved tubesurface
Higher yields

The above benefitsascertain superior quality tubes for a superior quality end product, more tubefootage per kilogram, reduced tooling problems, reduced chance of costlyleakages, increased productivity and fast manufacturing setup times.

Copper Coil: High-purity copper coils with excellent electrical conductivity (58 MS/m) and thermal conductivity (80 W/(m·K)), widely used in electronic wires, electrical components, and automotive radiators. Complies with ASTM B152, GB/T 2040.
Aluminum Coil: Lightweight aluminum coils (density 2.7 g/cm) with good corrosion resistance and formability, suitable for building facades, packaging materials, and industrial heat exchangers. Complies with ASTM B209, GB/T 3880. Exported to 40+ countries (Europe, North America, Southeast Asia, South America) with 15+ years of metal coil export experience.
Copper Coil Advantages: High electrical conductivity (T2 copper 58 MS/m), good ductility (elongation 30%), easy welding; Brass coil: Wear-resistant (H62 hardness 85 HB), cost-effective.
Aluminum Coil Advantages: Lightweight (1/3 of steel), corrosion-resistant (natural oxide film), recyclable; Alloy coil: High strength (6061 tensile strength 290 MPa), good machinability.

Classification : Incoloy Alloy
Incoloy Coil is a nickel-iron-chromium alloy with molybdenum and copper added.Incoloy Coil has excellent resistance to both reducing and oxidizing acids, to stress-corrosion cracking and to pitting and crevice corrosion. Incoloy Coil is Especially resistant to sulfuric and phosphoric acids.

Copper Raw Materials

Produced specifically for the industrial air conditioning system, the industrial copper tube Class 0 is a superior product line of Abc Tube Company which is suitable for the R410A, R32, withstand high working pressure.

The industrial copper tube Class 0 is in conformity with the American standard ASTM B280 for Air Conditioning and Refrigeration Field. The minimum thickness of the product is 0.81mm for the tube with OD: 6.35mm, 9.52mm v  12.70mm and is 1.00mm for the tube with OD: 15.88mm, 19.05mm.

Packing:
Each coil is packed in one single bag with grain moisture inside. The copper tube is printed with the companys name: along with the size and ASTM B280 standard.

Copper is found in natural ore deposits around the world. The most abundant ore are chalcopyrite and bornite, which contain both copper and iron sulphides. These account for about 80% of the worlds known ores. We supply ores with copper content within fairly narrow ranges of specifications to satisfy our customer needs

Level-wound copper tube coils for OEM buyers feeding tube-cutting, bending and heat-exchanger production lines. This offer focuses on production coil configuration rather than small installation coils.

APPLICATION AND SPECIFICATION
Send actual outside diameter, wall thickness, copper grade, temper, target coil weight and coil inner/outer diameter limits. State whether plain-bore or internally grooved tube is required so feasibility can be reviewed; the photos do not establish the internal tube profile. Include unwinding direction, joint restrictions and surface/cleanliness requirements.

SPECIFICATION AND ORDER DETAILS
Material: copper; exact grade, temper and manufacturing specification confirmed in the quotation. Minimum order quantity: 500 kg. Dimensions, tolerances and packing configuration are agreed per size. Photos supplied for this listing show product and packing examples; final delivered dimensions and configuration follow the confirmed order.

REQUEST A QUOTATION
Send outside diameter x wall thickness x length/coil length, quantity and destination port, or attach your specification sheet. Please include any required standard and inspection documents. Inspection scope can cover dimensions, surface condition, ends and other agreed checks; availability of certificates and test reports is confirmed before order acceptance.

PRICE AND DELIVERY
Indicative listing range: USD 13-17 per kilogram, FOB, for enquiry purposes. Final quotation depends on copper price, grade, dimensions, quantity, packing and agreed inspection scope. Freight and insurance are quoted separately if required. Sample arrangements and production/dispatch timing are confirmed in the quotation. Contact ZSB Metal with your specification list for a tailored offer.

Copper cathode is the primary raw material input for the production of copper rod for the wire and cable industry. Brat supplies cathodes that are produced with ISA Technology and comply with the cathode standards LME Grade A and Copper Cathodes Grade 1 (ASTM B115).

We supply Copper scrap that is procured directly from scrap yards. These are processed in a manner to suit the requirement of the buyer.

1. SPECIFICATION:

1) Grade: AISI 304/SUS 304 / S30400 / 1.4301

2) Shape: Coil / Roll / Strip

3) Treatment: Hot Rolled and Cold Rolled

4) Surface: No.1 / 2B / No.4 / HL / Brushed / BA / 8K Mirror / Embossed / Etched etc. (With Paper or PVC film to protection)

5) Thickness Range:

0.3 - 3mm ( Cold Rolled Process )

3 - 12mm or more (Hot Rolled Process)

6) Edge: Slit edge & Mill edge

7) Width Range: 10 - 2000mm

8) Length Range: Coil or as your request

9) Standard Size:

1000mm x coil mm

1500mm x coil mm

4' ----------1220mm x coil mm

5' ----------1524mm x coil mm

Above is our normal size of 304 and 304L stainless steel coil, but are capable of shearing or custom leveling to your required lengths and widths.

10) Available Standard:

ASTM, AISI, SUS, JIS, EN, DIN, GB, ASME, etc.

In general, ASTM A240/A240M or as your requirements

11) Certification: MTC and SGS and Any third party inspection

12) Package: Standard Export Sea-Package (Waterproof Kraft Paper + Bundle with steel strip)

13) Brand: TISCO, BAO STEEL, BAOXIN, ZPSS, LISCO, JISCO, etc.( main mills)

14) Containers:

20ft GP:5898mm(Length)x2352mm(Width)x2393mm(High)

40ft GP:12032mm(Length)x2352mm(Width)x2393mm(High)

40ft HC:12032mm(Lengh)x2352mm(Width)x2698mm(High)

20' container load 25tons goods whose length is under 5.8m

40' container load 25tons goods whose length is under11.8m

2. TYPICAL APPLICATIONS:
Chemical equipment and piping, heat exchanger components, dairy and food handling equipment and utensils, cryogenic vessels and components, architectural and structural applications exposed to non-marine atmospheres

3. CHEMICAL COMPOSITION:
Element Carbon Manganese Sulfur Phosphorus Silicon Chromium Nickel Nitrogen
Type 304 0.07% 2% 0.03% 0.45% 0.75% 17.5-19.5% 8-10.5% 0.1%
ElementCarbonManganeseSulfurPhosphorusSiliconChromiumNickelNitrogenType 304.L 0.03% 2% 0.03%0.45% 0.75%18.0-20.0%8.0-12.0% 0.1%
4. MECHANICAL PROPERTIES:

Type Yield Strength 0.2% offset (KSI) Tensile Strength (KSI) % Elongation(2�³ Gauge length) Hardness Rockwell
304 Ann 30 min. 75 min. 40% min. HRB 92 max.
304 Hard 75 min. 125 min. 12% min. 25 -32 HRC (typical)
304 Hard 110 min. 150 min. 7% min. 32 -37 HRC (typical)
304 Hard 25 min. 70 min. 40% min. HRB 92 max.
304L Hard 75 min. 125 min. 12% min. 25-32 HRC (typical)
304L Hard 110min 150 min 6% min 32 -37 HRC (typical)

5. PROCESSING:
Types 304 and 304L cannot be hardened by thermal treatment. Annealing: Heat to 1850o F to 2050 o F and cool at sufficiently high rates through 1500oF to 800oF to avoid precipitation of chromium carbides. Stress Relief Annealing: Cold worked parts should be stress relieved at 750oF for ½ to 2 hours.

Copper Pipe Coil Form

* Copper
- Tough Pitch Copper : C1100
- Phosphorus Deoxidized Copper : C1201 / C1220 / C1221
- Oxygen Free : C1010 / C1020
- Oxygen Free with Ag Copper : C1040 / C1050 / C1070

* Beryllium Copper : C17510 / C17410 / C17200 / C17300

* Bronze
- Phosphor Bronze : C5111 / C5102 / C5191 / C5212
- Aluminium Bronze : C6140 / C6300

* Brass
- Red Brass : C2100 / C2200 / C2300
- Yellow Brass : C2600 / C2680 / C2720 / C2800

* Nickel Silver: C7570 / C7451 / C7521 / C7541 / C7701

A stainless steel coil is a continuously rolled, coiled ribbon of stainless steel alloy. Produced by passing slabs through hot-rolling or cold-rolling mills, these coils serve as the primary raw material form factor for high-speed automated manufacturing, continuous roll-forming, and slit-strip production.

Advantages

Excellent corrosion and oxidation resistance
High strength, durability, and dimensional stability
Good weldability, formability, and machinability
Available in cold-rolled and hot-rolled forms
Continuous coil format helps support efficient cutting and fabrication
Available in multiple grades, thicknesses, widths, and surface finishes
Suitable for industrial, construction, automotive, food-processing, and fabrication applications

Copper pancake coils for air-conditioning installers, HVAC distributors and project buyers sourcing repeat installation materials.

APPLICATION AND SPECIFICATION
Tell us the equipment application, actual outside diameter, wall thickness, coil length and required temper. Also specify whether bare tube or an insulated assembly is required; this listing shows bare copper tube coils. Confirm refrigerant, design conditions, cleanliness, end-sealing and applicable standard requirements before quotation.

SPECIFICATION AND ORDER DETAILS
Material: copper; exact grade, temper and manufacturing specification confirmed in the quotation. Minimum order quantity: 500 kg. Dimensions, tolerances and packing configuration are agreed per size. Photos supplied for this listing show product and packing examples; final delivered dimensions and configuration follow the confirmed order.

REQUEST A QUOTATION
Send outside diameter x wall thickness x length/coil length, quantity and destination port, or attach your specification sheet. Please include any required standard and inspection documents. Inspection scope can cover dimensions, surface condition, ends and other agreed checks; availability of certificates and test reports is confirmed before order acceptance.

PRICE AND DELIVERY
Indicative listing range: USD 13-17 per kilogram, FOB, for enquiry purposes. Final quotation depends on copper price, grade, dimensions, quantity, packing and agreed inspection scope. Freight and insurance are quoted separately if required. Sample arrangements and production/dispatch timing are confirmed in the quotation. Contact ZSB Metal with your specification list for a tailored offer.

We hold immense expertise in making available Copper in many forms
including LME registered and non registered cathodes, billets, rods,
cakes, bars, foil, sheet, granules, plates, powder, shot, turnings, wire,
insulated wire, mesh and “evaporation slugs”.
Copper is one of the most important metals. Copper is reddish with a bright metallic
lustre. It is malleable, ductile, and a good conductor of heat and electricity (second
only to silver in electrical conductivity). Its alloys, brass and bronze, are very important.
Monel and gun metals also contain copper. The most important compounds are the
oxide and the sulphate, (blue vitriol

One of the largest integrated primary producer of aluminium in Asia. With a pan-Indian presence that encompasses the entire gamut of operations, from bauxite mining, alumina refining, aluminium smelting to downstream rolling, extrusions and recycling, Hindalco enjoys a leadership position in aluminium and downstream value-added products in India.

Our Indian aluminium operations are integrated and consist of bauxite mining, alumina refining, smelting and converting primary metal into value-added products. We have dedicated sources for critical raw materials such as bauxite, power and coal. We also have committed supply sources for auxiliary chemicals.

Our finished products include alumina, primary aluminium in the form of ingots, billets and wire rods, value-added products such as rolled products, extrusions and foils. Metallurgical alumina is used for our own captive needs. Chemical alumina and hydrates are used in range of industries including water treatment, fillers in cables and plastics, refractories and ceramics, glass among others.

Our facilities are in regions close to raw material sources, low cost and available labour and demand markets. This helps in reducing costs and improving profit margins. The technology upgrade has resulted in higher utilisation rates at our plants and improved efficiency.

We believe implementation of superior technology not only reduces costs but also provides superior and customised products, thus, improving our sales.

Hindalcoâ??s integrated complex at Renukoot, in Uttar Pradesh, India, houses an alumina refinery, an aluminium smelter and facilities for the production of semi-fabricated products. Power is sourced from our Renusagar power plant, located about 45km from Renukoot. Our facilities also include an aluminium smelter and an aluminium FRP facility (for rolled products, extrusions products and wire rods) at Hirakud (Odisha) with a captive power plant and coal mine, and alumina refinery at Muri (Jharkhand). Our Chemical grade alumina plant is located at Belagavi (Karnataka), and rolling mills at Belur (West Bengal), Taloja near Mumbai and Mouda near Nagpur (Maharashtra). Foil rolling facility is situated at Mouda near Nagpur (Maharashtra) and our extrusion plant at Alupuram (Kerala).

Hindalco's new age smelters at Aditya (Odisha) and Mahan (Madhya Pradesh), operating on state-of-the-art AP36 technology, have not only resulted in expansion of our capacities but also improved cost-efficiency of our operations. These smelters have their own captive power plants and source alumina from Utkal, our 100% subsidiary.

Utkal Alumina (Odisha) is a world class refinery with one of the lowest cost structure in the world. The bauxite for Utkal is sourced from Baphlimali mines by a 18 kilometer long conveyor, one of its kind in the world.

PPGI is galvanized color plate, PPGL is galvanized color plate, both are color plates, the substrates are different, one is galvanized structure, the other is galvanized structure, the substrate is different, which determines the difference in performance.

Advantages: It not only has the mechanical strength and easy forming properties of steel plates, but also has good decorative properties and corrosion resistance of organic materials. The coating has strong adhesion and can keep the color fresh for a long time. Application: Widely used in various fields such as construction, home appliances, furniture, public facilities and transportation.



Galvanized Coils

Manufacturer JIS DIN high-quality electro-galvanized steel coil

Product name:

Galvanized Coils

Place of Origin:

China

Type:

Steel Coil

Standard:

AiSi, ASTM, bs, DIN, GB, JIS

Certificate:

ISO9001

Grade:

SPCC,SPCD,SPCE/DC01.DC02.DC03/ST12,Q195 .Etc

Thickness:

0.1-5.0mm

Surface structure:

anti-finger print /skin pass/oiled/ dry/chromated

Size:

Customized according to customer needs

Tolerance:

±1%

Processing Service:

Bending, Welding, Decoiling, Cutting, Punching, Welding

Invoicing:

by actual weight

Delivery Time:

8-14 days

Technique:

Hot Rolled Based, Cold Rolled

Port:

Tianjin Qindao or according to customer needs

Packaging Details

in bundles, in bulk, customized packing

Galvanized coil is a surface galvanized sheet with yield strength of 235MPa.

Galvanized coil, a thin steel sheet that is dipped into a molten zinc bath to adhere a layer of zinc to its surface. It is mainly produced by the continuous galvanizing process, in which rolls of steel sheet are continuously dipped into a bath of molten zinc to make galvanized steel sheet; alloyed galvanized steel sheet. This steel sheet is also manufactured by the hot dipping method, but immediately after leaving the bath, it is heated to about 500�?�°C to produce an alloyed coating of zinc and iron. This type of galvanized coil has good paint adhesion and weldability.



Galvanized Coils

Manufacturer JIS DIN high-quality electro-galvanized steel coil

Product name:

Galvanized coil

Place of Origin:

China

Type:

Steel Coil

Standard:

AISI, ASTM, BS, DIN, GB, JIS

Certificate:

ISO9001

Grade:

SPCC,SPCD,SPCE/DC01.DC02.DC03/ST12,Q195 .Etc

Thickness:

0.1-5.0mm

Surface structure:

anti-finger print /skin pass/oiled/ dry/chromated

Size:

Customized according to customer needs

Tolerance:

�±1%

Processing Service:

Bending, Welding, Decoiling, Cutting, Punching, Welding

Invoicing:

by actual weight

Delivery Time:

7-15 days

Technique:

Hot Rolled Based, Cold Rolled

Port:

Tianjin Qingdao or according to your requirement

Packaging Details

in bundles, in bulk, customized packing

Aluminum coil is a kind of metal plate, melted by aluminum ingots, plus different alloys, through casting or rolling or hot rolling, cold rolling, annealing, transverse shear and other processes into aluminum coil, aluminum coil has low density, light weight, easy to handle, can be strengthened, plasticity, good thermal conductivity. So widely used in power plant and chemical plant pipeline insulation, heat exchanger, evaporator, heating appliances, cooking utensils and so on.

Product Name : Aluminum coil

Price range : $1000-$2000 Discounts are available for large orders

Minimum order quantity : 1 ton

Specifications

Thickness 0.1-10mm, width 600-1500,or according to requirements

Standard : ASTM, JIS, DIN, GB,

Steel Grade : ASTMB209 JIS H4000 EN573 GB/T3880

Test : Chemical Component Analysis, Mechanical Properties, Technical Properties, Exterior Size Inspection, , X-ray Test.

Product : certification

ISO,SGS,BV,TUV,

Processing Service : Welding, Drilling, Cutting, Bending,
Stamping,Embossing

Application : Roof , car building,curtain wall, Shelter ,oil tank,mould

Packing : Wooden pallet or according to customer's request

Lead time : 7 to 15 working days

Payment terms : T/T ,LC

Exporting country : Southeast Asia: Philippines, Vietnam, Laos

Northern Europe: Finland, Sweden, Norway, Iceland

South Africa: Zambia, Angola, Zimbabwe

Warehouse Storage : Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project

Classification : Inconel Alloy
Inconel Coil It has good high-temperature corrosion resistance and oxidation resistance, excellent cold and hot processing and welding process performance, and satisfactory thermal strength and high plasticity below 700. Alloys can be strengthened by cold working, and can also be joined by resistance welding, fusion welding, or brazing.

Cold Rolled Coil

Product - Steel Coils

Product Name
Galvanized steel coil
Metal Base
SPHCï¼?SPCC, SPCD, SPCE, ST12-15, DC01-06, Q195A(B)-Q345A(B)
Thickness
0.9mm/1mm/1.2mm
Width
600mm to 1500mm
Length
According to Customerâ??s Requirement or Cut into Sheet
Zinc Coating
20-275g/m2



Color Series
RAL Color Number
Coil Weight
2MT----10MT/Coil
Coil Internal Diameter
508----610mm
Application
Roofing Sheets, Home Electrical Appliance, Structural Materials, Commercial Use, Industry.
Package
Standard Export Package (Plastic film in the first layer,second layer is Kraft paper. Third layer is galvanized sheet)
Place of Origin
Durban, South Africa

Full Specifications

Electro copper Cathode Grade A 99.99%
Dimension : 914mm x 914 x 12mm (appr.) (+/-1%) (LME Standard)

1. Weight of each sheet: 125kgs (+/- 1%)

2. Net weight of each pallet: 2mts (+/- 1%)

3. Min. weight in each container: 20mts approx.

4. Gross weight of each container: 22.20mts approx.

5. Copper (Cu) min% 99.99%-99.97% min

Packing: Palletized banded by aluminum bands

Inter packing: Polyethylene film vacuum packaging for copper cathode for sale.
Outer packing: carton/plywood case.

Copper cathode Grade A
Purity: Purity 99.99%-99.97% min
Weight per Sheet: 125kg
Copper cathode, Cu 99.95%
3. Copper cathode Grade A Cu 99.95- 99.99 %
(1). Weight of each sheet: 125kgs (+/- 1%)
(2). Net weight of each pallet: 2mts (+/- 1%)
(3). Min. Weight in each container: 20mts approx.
(4). Gross weight of each container: 22.20mts approx.
Copper (Cu) min% 99.99%-99.97% min
(5) size: : 914mm x 914mm x 12mm (appr.)(36 x 36 x 0.5

Product : Electrolytic Copper Cathodes
Purity : Minimum 99.99%, LME Standards, Grade A
Usage : Used primarily in the electrical industry for manufacturing high-quality copper wire, power cables, and transmission components where superior electrical conductivity and corrosion resistance are critical.

Copper Concentrate is a high-quality mineral concentrate produced through the beneficiation and flotation of copper-bearing ores. It contains valuable copper minerals with copper content typically ranging from 20% to 30%, making it suitable for smelting and refining operations. Our copper concentrate is processed under strict quality control standards and supplied to metal refineries, smelters, and industrial manufacturers worldwide. Available in bulk quantities with customized specifications to meet buyer requirements.

High-purity electrolytic copper (LME Grade A 99.97% - 99.99%) used in electrical wiring, EV infrastructure, and industrial manufacturing.
Produced in compliance with ASTM B115 standards, ensuring consistent conductivity, traceability, and global acceptability.

Origin: DRC Congo
Transit Route: DRC Congo - Zambia - Dar es salaam Port
Destination: Upon client request

Copper concentrate is a processed form of copper ore that contains a high percentage of copper minerals, typically produced through crushing, grinding, and flotation processes. It serves as an important raw material for copper smelters, where the metal is extracted and refined into pure copper. Copper concentrate usually contains copper, iron, sulfur, and trace amounts of other valuable metals such as gold and silver. It plays a vital role in the global copper supply chain, supporting industries such as construction, electronics, renewable energy, and transportation.

Origin: Zambia
Transit Route: Zambia to Dar es salaam Port
Destination Port: Upon Client Request

Copper Cathode is a high-purity form of copper metal, typically containing 99.99% copper (Cu), produced through electrolytic refining or electrowinning processes. It is cast into flat plates and serves as the primary raw material for manufacturing copper rods, wires, cables, tubes, and other industrial products. Due to its excellent electrical conductivity, corrosion resistance, and ductility, copper cathode is widely used in the electrical, electronics, construction, automotive, and renewable energy industries. It is the internationally traded benchmark product for refined copper.

Origin: DRC Congo
Transit Routes: Zambia to Dar es Salaam Port
Destination: Upon client request


Copper Ore is a naturally occurring mineral deposit that contains copper-bearing minerals such as chalcopyrite, bornite, malachite, and chalcocite. It is extracted from mines and processed to produce copper concentrate, which is then refined into pure copper metal. Copper ore is a vital raw material for industries including construction, electrical wiring, electronics, transportation, and renewable energy due to copper's excellent electrical and thermal conductivity. The grade of copper ore varies depending on the deposit and determines its economic value and processing requirements.

Processed copper concentrate ready for smelting operations

Available Grades:
Premium
Standard
Commercial

Key Specifications:
Cu Content: 20-30%
Moisture: 8% max
Arsenic: 0.5% max

High-grade copper ore with excellent copper content

Available Grades:
High Grade
Medium Grade
Low Grade

Key Specifications:
Cu Content: 15-25%
Moisture: 8-12%
Size: 0-50mm

99.99% pure copper cathodes meeting LME Grade A standards

Available Grades:
Grade A (LME)
Grade B
Industrial Grade

Key Specifications:
Purity: 99.99% min
Weight: 125kg ±2%
Dimensions: 914x914x12mm

Copper Cathodes are high purity refined copper products widely used in industrial and manufacturing applications. They are produced through advanced electrolytic refining to ensure consistent quality high conductivity and excellent performance for bulk industrial supply. This product is suitable for large volume buyers seeking stable composition and reliable material for further processing

Product Specification
1 Copper content 99.97% minimum
2 Impurity level 0.03% maximum
3 Electrical conductivity 100% IACS
4 Surface quality smooth uniform bright finish
5 Form standard rectangular cathode sheets

Key Features
1 High purity copper with stable chemical composition
2 Excellent electrical and thermal conductivity
3 Clean surface suitable for direct industrial use
4 Consistent weight and thickness for bulk handling
5 Ideal for large scale manufacturing and export orders

Specification Item Details
Product Name Copper Cathodes
Material Electrolytic Copper
Grade Grade A
Purity 99.99 Percent
Copper Content Cu Minimum 99.97 Percent
Shape Flat Rectangular Plates
Standard Size 914 x 914 mm
Thickness Approximately 10 mm
Weight Per Sheet Approximately 125 kg
Surface Finish Smooth Bright Clean
Electrical Conductivity Very High
Application Electrical Industrial Manufacturing
Packaging Type Bundled on Wooden Pallets
Storage Condition Dry Cool and Ventilated Area

Premium-grade copper concentrate sourced from reliable mining operations, suitable for smelting and refining industries requiring high metal recovery efficiency.

High-purity copper cathodes widely used in electrical manufacturing, construction, power transmission, and industrial applications with consistent quality and excellent conductivity.

Taian Henson Metal Co lTD 420J2 Stainless Steel Strip For Razor Blade
201 j3 stainless steel strip
CR Stainless Steel Coil Stainless Steel Strip
201 stainless steel strip price
Sus ss420 420j1 ss420j2 stainless steel strip
ASTM SS 201 202 301 304 304L 309S 316 316L 409L 410S 410 420J2 430 440 Stainless Steel Strips/band/Belt/Coil
Factory Price 420j1 420j2 Stainless Steel Coil Strip Factory In Stock For Sale
420J2 1mm Thickness Stainless Steel Strip
Bright Mirror Finished Surface 420j2 Stainless Steel Coil/Sheet/Strip for Blade Razor
Modified 420 420J2 Stainless Steel Divider Strip For HDD Components
Stainless Steel strap02mm 4mm Thick 14404 420j2 309s Brush BA Price Stainless Steel Strip For Razor Blade 401 406 410 420J2 good price

Shg Zinc Coil
Rejected Material for Sale
Copper 0.10 to 0.25%
Titanium 0.06 to 0.10%
Shg Zinc Reminder

Metal base - Cold rolled steel coil
Thickness - 0.14mm-1.2mm
Width - 600mm-1250mm
Coil ID - 508mm,according to request
Zinc Coating - 40-275g/m2
Coil weight - 3-5 tons,according to request
Finish - Hot dipped galvanized
Hot sale size -750mm,762mm,800mm,900mm,914mm,1000mm,1200mm,1220mm,1250mm

Factory Price Prepainted Galvanized Steel Coil Gi Ppgi Coils

Standard:AISI, ASTM, BS, DIN, GB, JIS
Grade:DX51D
Thickness:0.12-1.2mm
Coil Weight:3-5tons
Effective width:600mm-1250mm
Coil ID:508/610mm
Base Material:Cold rolled steel coils
Steel zinc range:30-275g/m2
Hardness:Soft-full Hard

Copper Cathodes (DRC Origin) LME -17% | Trial + 2% PB + DLC MT700


We are pleased to introduce Candour Agency, Mumbai (India), a trade-facilitating company specializing in structured international metals transactions.
We hereby offer Copper Cathodes (LME Grade A), origin: Democratic Republic of Congo, under the following commercial terms:
Commercial Terms:
Trial Shipment: Available (200-500 MT)
Contract Quantity: 2,000-5,000 MT per month
Price: LME 17% (net to buyer)
Performance Bond: 2% issued by Seller against operative DLC
Payment Terms:
100% Irrevocable, Non-Transferable DLC (MT700)
Payable at the destination port post SGS/CIQ inspection
Settlement via MT103 / TT
Alternative Supply Option - Bonded Warehouse: Copper Cathodes are also available ex-bonded warehouse in Zambia / Tanzania, where buyers may:
Open the DLC and physically inspect the material at the yard before lifting
Purchase on Ex-Bonded Warehouse basis
Or opt for FOB / CIF shipment to the destination of their choice

Intermediaries: We welcome collaboration with intermediaries having direct buyer mandates.
Commissions are protected and can be mutually agreed upon based on the deal structure.
Further documentation, technical specifications, and supporting details shall be shared with prospective buyers upon progression of the transaction.

Serious buyers are requested to share LOI/ICPO along with bank details to proceed with FCO and SPA documentation.

We look forward to establishing a long-term and mutually beneficial business relationship.

Taian Henson Metal Co lTD 420J2 Stainless Steel Strip For Razor Blade
201 j3 stainless steel strip
CR Stainless Steel Coil Stainless Steel Strip
201 stainless steel strip price
Sus ss420 420j1 ss420j2 stainless steel strip
ASTM SS 201 202 301 304 304L 309S 316 316L 409L 410S 410 420J2 430 440 Stainless Steel Strips/band/Belt/Coil
Factory Price 420j1 420j2 Stainless Steel Coil Strip Factory In Stock For Sale
420J2 1mm Thickness Stainless Steel Strip
Bright Mirror Finished Surface 420j2 Stainless Steel Coil/Sheet/Strip for Blade Razor
Modified 420 420J2 Stainless Steel Divider Strip For HDD Components
Stainless Steel strap02mm 4mm Thick 14404 420j2 309s Brush BA Price Stainless Steel Strip For Razor Blade 401 406 410 420J2 good price
ASTM 201 202 301 302 304 304L 309S 316 316L 2304 254Mo 409L 410S 410 420J2 430 440 Stainless Steel Strips/band/Belt/Coil

Standard Technique Surface finish Grade Thickness Width*Length
JIS Aisi ASTM DIN EN bs Hot rolled No.1 201, 202, 301, 304, 304J1, 304L, 321, 316, 316L, 309S, 310S, 317L, 409L, 410, 410S, 420J1, 420J2, 430, 444, 441, 436, 439, 904L, 2520, 2205, 2507 etc 4.0mm-16mm,17-150mm
1250*3000mm(4.1*10ft)

1500*3000mm(5*10ft)

1250*6000mm(4.1*19.6ft)

1500*6000mm(5*19.6ft)

1800*6000mm(5.9*19.6ft)

2000*6000mm(6.5*19.6ft)

Cold rolled 2B 201, 202, 301, 304, 304J1, 304L, 321, 316, 316L, 309S, 310S, 317L, 409L, 410, 410S, 420J1, 420J2, 430, 444, 441, 436, 439, 904L, 2520, 2205, 2507 etc 0.2mm-3.0mm
1000*2000mm(3.2*6.5ft)

1219*2438mm(4*8ft)

1500*3000mm(5*10ft)

1800 available

2000 available

No.4
Hairline
8K
BA
Hot rolled or cold rolled embossed similar to the above info.
colored
Customized We can customize surface treatment, grade, thickness, width, length etc according to customer\'s requirements.
Send us inquiry to get cost-effective price and details within 1 hour.

Chemical Composition Mechanical Character
Grade C Si Mn P S Ni Cr Mo Cu N Hardness
201 0.15 1 5.50-7.50 0.045 0.03 3.50-5.50 16.00-18. 00 ? 0.05-0.25 HB 241, HRB 100, HV240
304 0.08 1 2 0.045 0.03 8.00-11.00 18.00-20. 00 HB 187, HRB 90, HV 200
310s 0.08 1.5 2 0.045 0.03 19.00-22. 00 24.00-26. 00 HB 187, HRB 90, HV 200
316L 0.03 1 2 0.045 0.03 10.00-14. 00 16.00-18. 00 2.00-3.00 HB 187, HRB 90, HV 200
321 0.08 1 2 0.045 0.03 9.00-12.00 17.00-19. 00 HB 187, HRB 90, HV 200
430 0.12 1 1 0.04 0.03 (b) 16.00-18. 00 HB 183, HRB 88, HV 200

Copper Cathodes High-Purity Copper for Industrial Manufacturing

Our copper cathodes are high-purity refined copper sheets produced through electrorefining processes. Typically conforming to LME Grade A standards, they contain a minimum copper content of 99.99%, ensuring excellent electrical and thermal conductivity.

Copper cathodes serve as the primary raw material for producing a wide range of copper products, including electrical wires, cables, rods, tubes, and industrial components. They are widely used in power transmission, electronics, construction, and manufacturing industries due to their superior conductivity and reliability.

Key Features:

High-purity copper (minimum 99.99% Cu content)
Electrorefined to meet international standards (LME Grade A)
Excellent electrical and thermal conductivity
Uniform rectangular sheets with consistent weight and composition
Free from impurities and suitable for direct industrial use
Primary raw material for copper wire, rods, and tubing production
Widely used in electrical, construction, and industrial sectors
Available in bulk for wholesale and export supply
Carefully handled and packaged to maintain quality and integrity