Find Verified Rubber Items Suppliers, Manufacturers and Wholesalers

Properties white powder , inodorous , atoxic , soluble in water , insoluble in gasoline application it can be 50 : 50 blended with accelerator m or dm to eliminate the discoloration and blooming of m or dm in rubber compound , erpecially in white or light rubber compound

Pe bag lined with pe film

Non-polluting antioxidant TH1520 macromolecule material antioxidant
Chinese Name: 2,4-bis (n-octylthiomethyl) -6-methylphenol
English Name: 2,4-Bis (octylthiomethyl) -6-Methylphenol
CAS No. 110553-27-0
Molecular formula: C25H44OS2
Molecular weight: 424.7
Physical property:
Melting point: 20 C
Appearance: White crystals or colorless to yellowish liquids
Specific gravity: 0.975-0.979 (20 C)
Viscosity: 80-90 mPa.s (20 C)
Technical Indicators:
Content (>98%)
Transmittance: 425 nm 95%
Antioxidant 1520 is a new high molecular weight liquid antioxidant, which has certain effect on the stability of rubber and adhesive compound. 1520, it can effectively prevent gel formation and prevent rubber color, molecular weight and viscosity changes during isolation, drying, storage and shipping. 1520 is effective even in rubber processing without the addition of phosphite (TNPP). But if necessary, adding phosphite will make the effect better. At the same time, 1520 can also be used in polymer or organic matrix, including thermoplastic elastomer, synthetic oil, etc.
Purpose:
This product is a rubber antioxidant. Mainly used in cis-butadiene rubber, styrene-butadiene rubber, ethylene propylene rubber, nitrile rubber, thermoplastic elastomer and other synthetic rubber, its dosage is small, antioxidant effect is good, can improve the stability of plastics or synthetic plastics. It belongs to environmental protection antioxidant, and realizes the transformation of rubber products from general type to environmental protection type. This product can also be used in lubricants, plastics and other polymer polymers, with excellent oxidation resistance.
Packing, storage, transportation and precautions:
Galvanized drum packing, net weight 200 kg;
The product should be stored in a clean and dry place to prevent rain.
When handling this product, strong rubbing should be avoided.

Non-polluting antioxidant TH1520 macromolecule material antioxidant
Chinese Name: 2,4-bis (n-octylthiomethyl) -6-methylphenol
English Name: 2,4-Bis (octylthiomethyl) -6-Methylphenol
CAS No. 110553-27-0
Molecular formula: C25H44OS2
Molecular weight: 424.7
Physical property:
Melting point: 20 C
Appearance: White crystals or colorless to yellowish liquids
Specific gravity: 0.975-0.979 (20 C)
Viscosity: 80-90 mPa.s (20 C)
Technical Indicators:
Content (>98%)
Transmittance: 425 nm 95%
Antioxidant 1520 is a new high molecular weight liquid antioxidant, which has certain effect on the stability of rubber and adhesive compound. 1520, it can effectively prevent gel formation and prevent rubber color, molecular weight and viscosity changes during isolation, drying, storage and shipping. 1520 is effective even in rubber processing without the addition of phosphite (TNPP). But if necessary, adding phosphite will make the effect better. At the same time, 1520 can also be used in polymer or organic matrix, including thermoplastic elastomer, synthetic oil, etc.
Purpose:
This product is a rubber antioxidant. Mainly used in cis-butadiene rubber, styrene-butadiene rubber, ethylene propylene rubber, nitrile rubber, thermoplastic elastomer and other synthetic rubber, its dosage is small, antioxidant effect is good, can improve the stability of plastics or synthetic plastics. It belongs to environmental protection antioxidant, and realizes the transformation of rubber products from general type to environmental protection type. This product can also be used in lubricants, plastics and other polymer polymers, with excellent oxidation resistance.
Packing, storage, transportation and precautions:
Galvanized drum packing, net weight 200 kg;
The product should be stored in a clean and dry place to prevent rain.
When handling this product, strong rubbing should be avoided.

Rubber Accelerator XT580 ( Typeó=)
Chemical Name
N --aliphatic benzothiazoles sIfenamide + retarde
Properties Grey white or light yellow powder , atoxic , no --nitrosamine . no --carcinogenic effect .
Application its curing rate 15 similar to that of NS It ' 5 suitable for NR and SR in radial tire manafacture.



25kg per PE bag

Antioxidant 2246
Chemical Name

2 , 2 í»--methylene bis ( 4 --methyl --6 ¿Ctert butyl phenol )
Properties White crystal powder . it 15 a general non --staining phenol --like antioxidant . Application Its It 15 widely used in NR , SR and latex articles as well as various Synthetic materials and petroleum products . In particular , it is applicable for light or colorful rubber and latex --dipped articles because of its non --discoloration . It ' s also an excellent antioxidant for many knids of plastics , such as ABS PE and cellulose resin etc


25Kg per PE bag

ACTOR-512, a vulcanizing agent for special rubber containing chlorine
Cas: 72676-55-2
Composition: Thiadiazole derivatives
Appearance: Yellow powder
Indicator Detection Method
Fineness 200 Pass Rate (> 99%) Screening and Washing
Elemental Analysis of 17.5-19.7% Nitrogen Content
Elemental Analysis of Sulfur 63.0-67.0%
Testing Indicators: Based on Enterprise Standards
Ash content 0.4%
Density 25 degrees C 2.09 Mg/m3
Drying weightlessness 2 hrs. at 60-65 degrees C 0.40%
Melting point 153-160 degrees C
Soluble insoluble in water and benzene
Purpose: Actor-512 is a polymer obtained by oxidation of dimercaptothiadiazole, in which the content of sulfur element reaches 66%. Hybrid compounds have conjugated atoms, so they can be used for many special purposes. 512 can also be used as an extrusion and anti-wear additive in the production of lubricating grease, which endows the grease with high extreme pressure and anti-wear properties, and has a series of anti-oxidation effects with the role of metal deactivation, effectively preventing the pollution of non-ferrous metals to oil products.
Packing: 25kg/drum
Shelf life: sealed at room temperature for one year

Details of silicone rubber vulcanizer DPDH
Chinese Name: 2,5-dimethyl-2,5-bis (tertbutyl peroxy) hexane; 2,5-dimethyl-2,5-bis (peroxide tertbutyl peroxide) hexane; 2,5-dimethyl-2,5-bisbisbisbisbisbisbisbisbisbisbisbisbisbisbisbisbis (bis "2,5" vulcanizing agent; bis-2,5-hexane; 2,5-didimethyl-2,5-bis-2,5-bis (peroxytertbutyl) hexane (peroxy tertbutyl) hexane; 2,5-didididimethyl-2,5-dididididimethyl-2,5-bisbisbisbis (tertbutbutyl peroxy) hexahexa5-dimethyl-2,5 bis (tert) Butyl peroxide) hexane.
English Name: 2,5-BIS (T-BUTYLPEROXY) - 2,5-DIMETHYLHEXANE; 2,5-BIS (TERT-BUTYLPEROXY) - 2,5-DIMETYLPEROXY) - 2,5-DIMETHYL-2,5-DIMETHYL-2,5-DIMETHYL-2,5-BIS (TERT-BUTYLPEREROXY) HEXANE; 2,5-DIMETHYL-2,5-DIMETHYL-2,5-DI DIMETHYL-2,5-DI (T-BUTYLPEREROXY-BUTYL-DI DI DI (T-BUTYL-BUTYL-PEROXY) HEXANE; - BUTYLPEROXY) HEXANE
Di-tert-butyl 1,1,4,4-tetramethyltetramethylene diperoxide; luperox; LUPEROX 101XL; Trigonox 101; VAROX DBPH; VAROX DBPH-50
Molecular formula: C16H34O4
Molecular weight: 290.4
CAS No. 78-63-7
Product Profile:
Bis-pentadecyl sulfide can be used as crosslinking agent for natural or synthetic rubber, as well as for thermoplastic polyolefins. Compared with 3M and di-tert-base silicone rubber products, the silicone rubber products produced have higher operation safety, better heat resistance and physical properties. It has high content, low consumption and low cost. It can be used as crosslinking of natural or synthetic rubber as well as thermoplastic polyolefins.
1. Rubber with bis-pentadecane vulcanizer has excellent scorching safety.
2. Safe processing temperature: 135 C (rheometer tS2 > 20 minutes)
3. Typical crosslinking temperature: 175 C (rheometer T90 about 12 minutes)
Use of bis-pentadecyl sulfide:
Bis-pentadecane vulcanizer is a bifunctional peroxide, which can be used as crosslinking of natural or synthetic rubber, as well as thermoplastic polyolefins.
Product Specification of Bi-pentadecane Sulfide:
Appearance: White paste with high viscosity: 50 PT-Co Max
Content: 92.0% min ROS: 10.14% min
Organic peroxides are unstable to heat and can produce exothermic self-accelerated decomposition. Self-accelerated decomposition temperature SADT is the lowest temperature at which peroxide may produce self-accelerated decomposition in packaging for transportation. The determination of SADT is based on the "heat accumulation storage test".
Bis-pentadecane vulcanizer packaging: standard packaging is 25kg/plastic bucket

CAS; 51988-14-8 Usage: CPE, CM Rubber Vulcanizing Agent
Vulcanizing agent TDDS
Appearance The finished product is light yellow powder. Packing: 25kg/cardboard drum
Composition of thiadiazole thiadiazole ester derivatives
Content (assy)%>96
Detail% > 99 (pass rate of 320 meshes)
Melting Point (m, p)% 165-168 C
Moisture (w, c) is less than 0.30
Ash (%) less than 0.30
DMF density 1.46
Physical properties: insoluble in methanol, ethanol, water, slightly soluble in acetone
Foreign similar product brands: Rhenogran TDD in Germany; ACTOR-ECHO.A in USA
Shelf life: 12 months sealed at room temperature
Product description:
TDDS is a vulcanizing crosslinker specially designed for halogenated synthetic rubber such as chlorinated polyethylene rubber (CM) and chlorohydrin rubber (ECO) chloroprene rubber (CR) chlorosulfonated polyethylene rubber (CSR). TDDS is a derivative of 2,5-dimercapto-1,3,4-thiadiazole ester.
TDDS is a derivative of thiadiazole ester. It can be used as a new vulcanization crosslinker for halogenated polymers such as chlorinated polyethylene rubber (CPE), polyvinyl chloride (PVC) and chlorohydrin rubber (ECO), chlorosulfonated polyethylene rubber (CSM), chlorinated rubber, chlorobutadiene rubber (EVA). TDDS is especially suitable for vulcanization and crosslinking of CPE. It is a highly effective and high performance vulcanizing agent for chlorinated polyethylene with NC or BF.
Advantages of TDD vulcanization system:
1. TDDS vulcanization system is suitable for any vulcanization methods, such as moulding, continuous vulcanization, tank type, microwave type, etc. The vulcanization process will not be oxidized by air. It is suitable for Moldless vulcanization in vulcanization tank with low vulcanization temperature. Also suitable for injection moulding can be vulcanized in vulcanizer.
2. The curing speed is fast and the positive curing time is short.
3. Safe operation, no pollution in the production process, no irritating odor, no frost, no scorch.
4. The physical properties of vulcanizates are as good as those of peroxide systems, and they are ageing-resistant. Excellent heat resistance, small compression permanent deformation, especially good tear resistance.
5. The product has good appearance, no frost spraying, no burning and no irritating odor.
Product applications:
1. The recommended dosage is 2.0-2.5 TDDS and 1.5 BF (NC) for cable sheath and rubber products such as inner and outer rubber and conveyor belts.
2. A small amount of insoluble sulfur can be used in braided rubber pipes with copper-plated steel wires to improve their vulcanization and adhesion to steel wires.
3. Suitable for high temperature and rapid vulcanization, and also for steam tank type vulcanization: 4 kg/cm2 steam pressure (151 C) vulcanization tank. Suggestion of vulcanization time is 40 minutes.

CPE/CR Rubber Vulcanizer H631
Colour: Light yellow powder
Cross-linking Agent ACTORH-631
H631 can be used as a thiadiazole vulcanization system for vulcanization crosslinking of chlorinated polyethylene rubber (CPE/CM) and chloroprene rubber (CR). As a CM/CR high-efficiency vulcanizing agent, it can produce heat-resistant, ozone-ageing, flame-retardant and excellent physical properties. It is widely used in rubber products such as cables, hoses, tapes and so on. H631 is obtained by complex condensation coupling reaction of thiadiazole derivatives and other macromolecule amides. Its appearance is a pale yellow powder. The product can be used in various vulcanization processes of CPE/CR, such as moulding, continuous vulcanization, pot-type, microwave-type, etc. H631 can effectively vulcanize chlorinated polyethylene rubber (CM), chloroprene rubber (CR) and obtain excellent vulcanizates.
Characteristic
1. H631 is suitable for low pressure die-less vulcanization (conventional peroxide system requires higher vulcanization temperature and pressure), with good processing safety and longer scorching time.
2. H631 can replace high-priced plasticizers such as DOP with cheap plasticizers such as aromatic oils.
3. H631 is an effective co-vulcanizing crosslinking agent for rubber such as CPE/EPDM CPE/NR CPE/CR.