Find Verified Synthetic Rubber Suppliers, Manufacturers and Wholesalers

CAS; 51988-14-8 Usage: CPE, CM Rubber Vulcanizing Agent
Vulcanizing agent TDDS
Appearance The finished product is light yellow powder. Packing: 25kg/cardboard drum
Composition of thiadiazole thiadiazole ester derivatives
Content (assy)%>96
Detail% > 99 (pass rate of 320 meshes)
Melting Point (m, p)% 165-168 C
Moisture (w, c) is less than 0.30
Ash (%) less than 0.30
DMF density 1.46
Physical properties: insoluble in methanol, ethanol, water, slightly soluble in acetone
Foreign similar product brands: Rhenogran TDD in Germany; ACTOR-ECHO.A in USA
Shelf life: 12 months sealed at room temperature
Product description:
TDDS is a vulcanizing crosslinker specially designed for halogenated synthetic rubber such as chlorinated polyethylene rubber (CM) and chlorohydrin rubber (ECO) chloroprene rubber (CR) chlorosulfonated polyethylene rubber (CSR). TDDS is a derivative of 2,5-dimercapto-1,3,4-thiadiazole ester.
TDDS is a derivative of thiadiazole ester. It can be used as a new vulcanization crosslinker for halogenated polymers such as chlorinated polyethylene rubber (CPE), polyvinyl chloride (PVC) and chlorohydrin rubber (ECO), chlorosulfonated polyethylene rubber (CSM), chlorinated rubber, chlorobutadiene rubber (EVA). TDDS is especially suitable for vulcanization and crosslinking of CPE. It is a highly effective and high performance vulcanizing agent for chlorinated polyethylene with NC or BF.
Advantages of TDD vulcanization system:
1. TDDS vulcanization system is suitable for any vulcanization methods, such as moulding, continuous vulcanization, tank type, microwave type, etc. The vulcanization process will not be oxidized by air. It is suitable for Moldless vulcanization in vulcanization tank with low vulcanization temperature. Also suitable for injection moulding can be vulcanized in vulcanizer.
2. The curing speed is fast and the positive curing time is short.
3. Safe operation, no pollution in the production process, no irritating odor, no frost, no scorch.
4. The physical properties of vulcanizates are as good as those of peroxide systems, and they are ageing-resistant. Excellent heat resistance, small compression permanent deformation, especially good tear resistance.
5. The product has good appearance, no frost spraying, no burning and no irritating odor.
Product applications:
1. The recommended dosage is 2.0-2.5 TDDS and 1.5 BF (NC) for cable sheath and rubber products such as inner and outer rubber and conveyor belts.
2. A small amount of insoluble sulfur can be used in braided rubber pipes with copper-plated steel wires to improve their vulcanization and adhesion to steel wires.
3. Suitable for high temperature and rapid vulcanization, and also for steam tank type vulcanization: 4 kg/cm2 steam pressure (151 C) vulcanization tank. Suggestion of vulcanization time is 40 minutes.

Rubber Accelerator XT580 ( Typeó=)
Chemical Name
N --aliphatic benzothiazoles sIfenamide + retarde
Properties Grey white or light yellow powder , atoxic , no --nitrosamine . no --carcinogenic effect .
Application its curing rate 15 similar to that of NS It ' 5 suitable for NR and SR in radial tire manafacture.



25kg per PE bag

Antioxidant 2246
Chemical Name

2 , 2 í»--methylene bis ( 4 --methyl --6 ¿Ctert butyl phenol )
Properties White crystal powder . it 15 a general non --staining phenol --like antioxidant . Application Its It 15 widely used in NR , SR and latex articles as well as various Synthetic materials and petroleum products . In particular , it is applicable for light or colorful rubber and latex --dipped articles because of its non --discoloration . It ' s also an excellent antioxidant for many knids of plastics , such as ABS PE and cellulose resin etc


25Kg per PE bag

Details of silicone rubber vulcanizer DPDH
Chinese Name: 2,5-dimethyl-2,5-bis (tertbutyl peroxy) hexane; 2,5-dimethyl-2,5-bis (peroxide tertbutyl peroxide) hexane; 2,5-dimethyl-2,5-bisbisbisbisbisbisbisbisbisbisbisbisbisbisbisbisbis (bis "2,5" vulcanizing agent; bis-2,5-hexane; 2,5-didimethyl-2,5-bis-2,5-bis (peroxytertbutyl) hexane (peroxy tertbutyl) hexane; 2,5-didididimethyl-2,5-dididididimethyl-2,5-bisbisbisbis (tertbutbutyl peroxy) hexahexa5-dimethyl-2,5 bis (tert) Butyl peroxide) hexane.
English Name: 2,5-BIS (T-BUTYLPEROXY) - 2,5-DIMETHYLHEXANE; 2,5-BIS (TERT-BUTYLPEROXY) - 2,5-DIMETYLPEROXY) - 2,5-DIMETHYL-2,5-DIMETHYL-2,5-DIMETHYL-2,5-BIS (TERT-BUTYLPEREROXY) HEXANE; 2,5-DIMETHYL-2,5-DIMETHYL-2,5-DI DIMETHYL-2,5-DI (T-BUTYLPEREROXY-BUTYL-DI DI DI (T-BUTYL-BUTYL-PEROXY) HEXANE; - BUTYLPEROXY) HEXANE
Di-tert-butyl 1,1,4,4-tetramethyltetramethylene diperoxide; luperox; LUPEROX 101XL; Trigonox 101; VAROX DBPH; VAROX DBPH-50
Molecular formula: C16H34O4
Molecular weight: 290.4
CAS No. 78-63-7
Product Profile:
Bis-pentadecyl sulfide can be used as crosslinking agent for natural or synthetic rubber, as well as for thermoplastic polyolefins. Compared with 3M and di-tert-base silicone rubber products, the silicone rubber products produced have higher operation safety, better heat resistance and physical properties. It has high content, low consumption and low cost. It can be used as crosslinking of natural or synthetic rubber as well as thermoplastic polyolefins.
1. Rubber with bis-pentadecane vulcanizer has excellent scorching safety.
2. Safe processing temperature: 135 C (rheometer tS2 > 20 minutes)
3. Typical crosslinking temperature: 175 C (rheometer T90 about 12 minutes)
Use of bis-pentadecyl sulfide:
Bis-pentadecane vulcanizer is a bifunctional peroxide, which can be used as crosslinking of natural or synthetic rubber, as well as thermoplastic polyolefins.
Product Specification of Bi-pentadecane Sulfide:
Appearance: White paste with high viscosity: 50 PT-Co Max
Content: 92.0% min ROS: 10.14% min
Organic peroxides are unstable to heat and can produce exothermic self-accelerated decomposition. Self-accelerated decomposition temperature SADT is the lowest temperature at which peroxide may produce self-accelerated decomposition in packaging for transportation. The determination of SADT is based on the "heat accumulation storage test".
Bis-pentadecane vulcanizer packaging: standard packaging is 25kg/plastic bucket

Details of silicone rubber vulcanizer DPDH
Chinese Name: 2,5-dimethyl-2,5-bis (tertbutyl peroxy) hexane; 2,5-dimethyl-2,5-bis (peroxide tertbutyl peroxide) hexane; 2,5-dimethyl-2,5-bisbisbisbisbisbisbisbisbisbisbisbisbisbisbisbisbis (bis "2,5" vulcanizing agent; bis-2,5-hexane; 2,5-didimethyl-2,5-bis-2,5-bis (peroxytertbutyl) hexane (peroxy tertbutyl) hexane; 2,5-didididimethyl-2,5-dididididimethyl-2,5-bisbisbisbis (tertbutbutyl peroxy) hexahexa5-dimethyl-2,5 bis (tert) Butyl peroxide) hexane.
English Name: 2,5-BIS (T-BUTYLPEROXY) - 2,5-DIMETHYLHEXANE; 2,5-BIS (TERT-BUTYLPEROXY) - 2,5-DIMETYLPEROXY) - 2,5-DIMETHYL-2,5-DIMETHYL-2,5-DIMETHYL-2,5-BIS (TERT-BUTYLPEREROXY) HEXANE; 2,5-DIMETHYL-2,5-DIMETHYL-2,5-DI DIMETHYL-2,5-DI (T-BUTYLPEREROXY-BUTYL-DI DI DI (T-BUTYL-BUTYL-PEROXY) HEXANE; - BUTYLPEROXY) HEXANE
Di-tert-butyl 1,1,4,4-tetramethyltetramethylene diperoxide; luperox; LUPEROX 101XL; Trigonox 101; VAROX DBPH; VAROX DBPH-50
Molecular formula: C16H34O4
Molecular weight: 290.4
CAS No. 78-63-7
Product Profile:
Bis-pentadecyl sulfide can be used as crosslinking agent for natural or synthetic rubber, as well as for thermoplastic polyolefins. Compared with 3M and di-tert-base silicone rubber products, the silicone rubber products produced have higher operation safety, better heat resistance and physical properties. It has high content, low consumption and low cost. It can be used as crosslinking of natural or synthetic rubber as well as thermoplastic polyolefins.
1. Rubber with bis-pentadecane vulcanizer has excellent scorching safety.
2. Safe processing temperature: 135 C (rheometer tS2 > 20 minutes)
3. Typical crosslinking temperature: 175 C (rheometer T90 about 12 minutes)
Use of bis-pentadecyl sulfide:
Bis-pentadecane vulcanizer is a bifunctional peroxide, which can be used as crosslinking of natural or synthetic rubber, as well as thermoplastic polyolefins.
Product Specification of Bi-pentadecane Sulfide:
Appearance: White paste with high viscosity: 50 PT-Co Max
Content: 92.0% min ROS: 10.14% min
Organic peroxides are unstable to heat and can produce exothermic self-accelerated decomposition. Self-accelerated decomposition temperature SADT is the lowest temperature at which peroxide may produce self-accelerated decomposition in packaging for transportation. The determination of SADT is based on the "heat accumulation storage test".
Bis-pentadecane vulcanizer packaging: standard packaging is 25kg/plastic bucket

Properties white powder , inodorous , atoxic , soluble in water , insoluble in gasoline application it can be 50 : 50 blended with accelerator m or dm to eliminate the discoloration and blooming of m or dm in rubber compound , erpecially in white or light rubber compound

Pe bag lined with pe film

ACTOR-512, a vulcanizing agent for special rubber containing chlorine
Cas: 72676-55-2
Composition: Thiadiazole derivatives
Appearance: Yellow powder
Indicator Detection Method
Fineness 200 Pass Rate (> 99%) Screening and Washing
Elemental Analysis of 17.5-19.7% Nitrogen Content
Elemental Analysis of Sulfur 63.0-67.0%
Testing Indicators: Based on Enterprise Standards
Ash content 0.4%
Density 25 degrees C 2.09 Mg/m3
Drying weightlessness 2 hrs. at 60-65 degrees C 0.40%
Melting point 153-160 degrees C
Soluble insoluble in water and benzene
Purpose: Actor-512 is a polymer obtained by oxidation of dimercaptothiadiazole, in which the content of sulfur element reaches 66%. Hybrid compounds have conjugated atoms, so they can be used for many special purposes. 512 can also be used as an extrusion and anti-wear additive in the production of lubricating grease, which endows the grease with high extreme pressure and anti-wear properties, and has a series of anti-oxidation effects with the role of metal deactivation, effectively preventing the pollution of non-ferrous metals to oil products.
Packing: 25kg/drum
Shelf life: sealed at room temperature for one year

CPE/CR Rubber Vulcanizer H631
Colour: Light yellow powder
Cross-linking Agent ACTORH-631
H631 can be used as a thiadiazole vulcanization system for vulcanization crosslinking of chlorinated polyethylene rubber (CPE/CM) and chloroprene rubber (CR). As a CM/CR high-efficiency vulcanizing agent, it can produce heat-resistant, ozone-ageing, flame-retardant and excellent physical properties. It is widely used in rubber products such as cables, hoses, tapes and so on. H631 is obtained by complex condensation coupling reaction of thiadiazole derivatives and other macromolecule amides. Its appearance is a pale yellow powder. The product can be used in various vulcanization processes of CPE/CR, such as moulding, continuous vulcanization, pot-type, microwave-type, etc. H631 can effectively vulcanize chlorinated polyethylene rubber (CM), chloroprene rubber (CR) and obtain excellent vulcanizates.
Characteristic
1. H631 is suitable for low pressure die-less vulcanization (conventional peroxide system requires higher vulcanization temperature and pressure), with good processing safety and longer scorching time.
2. H631 can replace high-priced plasticizers such as DOP with cheap plasticizers such as aromatic oils.
3. H631 is an effective co-vulcanizing crosslinking agent for rubber such as CPE/EPDM CPE/NR CPE/CR.

Thiadiazole hindered phenol derivatives
Non-polluting New Antioxidant TH1520 Lubricating Oil Antioxidant CAS:110553-27-0
Chinese Name: 2,4-bis (n-octylthiomethyl) -6-methylphenol
English Name: 2,4-Bis (octylthiomethyl) -6-Methylphenol
CAS No. 110553-27-0
Molecular formula: C25H44OS2
Molecular weight: 424.7
Physical property:
Melting point: 20 C
Appearance: White crystals or colorless to yellowish liquids
Specific gravity: 0.975-0.979 (20 C)
Viscosity: 80-90 mPa.s (20 C)
Technical Indicators:
Content (>98%)
Transmittance: 425 nm 95%
Antioxidant 1520 is a new high molecular weight liquid antioxidant, which has certain effect on the stability of rubber and adhesive compound. 1520, it can effectively prevent gel formation and prevent rubber color, molecular weight and viscosity changes during isolation, drying, storage and shipping. 1520 is effective even in rubber processing without the addition of phosphite (TNPP). But if necessary, adding phosphite will make the effect better. At the same time, 1520 can also be used in polymer or organic matrix, including thermoplastic elastomer, synthetic oil, etc.
Purpose:
This product is a rubber antioxidant. Mainly used in cis-butadiene rubber, styrene-butadiene rubber, ethylene propylene rubber, nitrile rubber, thermoplastic elastomer and other synthetic rubber, its dosage is small, antioxidant effect is good, can improve the stability of plastics or synthetic plastics. It belongs to environmental protection antioxidant, and realizes the transformation of rubber products from general type to environmental protection type. This product can also be used in lubricants, plastics and other polymer polymers, with excellent oxidation resistance.
Packing, storage, transportation and precautions:
Galvanized drum packing, net weight 200 kg;
The product should be stored in a clean and dry place to prevent rain.
When handling this product, strong rubbing should be avoided.

Non-polluting antioxidant TH1520 macromolecule material antioxidant
Chinese Name: 2,4-bis (n-octylthiomethyl) -6-methylphenol
English Name: 2,4-Bis (octylthiomethyl) -6-Methylphenol
CAS No. 110553-27-0
Molecular formula: C25H44OS2
Molecular weight: 424.7
Physical property:
Melting point: 20 C
Appearance: White crystals or colorless to yellowish liquids
Specific gravity: 0.975-0.979 (20 C)
Viscosity: 80-90 mPa.s (20 C)
Technical Indicators:
Content (>98%)
Transmittance: 425 nm 95%
Antioxidant 1520 is a new high molecular weight liquid antioxidant, which has certain effect on the stability of rubber and adhesive compound. 1520, it can effectively prevent gel formation and prevent rubber color, molecular weight and viscosity changes during isolation, drying, storage and shipping. 1520 is effective even in rubber processing without the addition of phosphite (TNPP). But if necessary, adding phosphite will make the effect better. At the same time, 1520 can also be used in polymer or organic matrix, including thermoplastic elastomer, synthetic oil, etc.
Purpose:
This product is a rubber antioxidant. Mainly used in cis-butadiene rubber, styrene-butadiene rubber, ethylene propylene rubber, nitrile rubber, thermoplastic elastomer and other synthetic rubber, its dosage is small, antioxidant effect is good, can improve the stability of plastics or synthetic plastics. It belongs to environmental protection antioxidant, and realizes the transformation of rubber products from general type to environmental protection type. This product can also be used in lubricants, plastics and other polymer polymers, with excellent oxidation resistance.
Packing, storage, transportation and precautions:
Galvanized drum packing, net weight 200 kg;
The product should be stored in a clean and dry place to prevent rain.
When handling this product, strong rubbing should be avoided.

Non-polluting antioxidant TH1520 macromolecule material antioxidant
Chinese Name: 2,4-bis (n-octylthiomethyl) -6-methylphenol
English Name: 2,4-Bis (octylthiomethyl) -6-Methylphenol
CAS No. 110553-27-0
Molecular formula: C25H44OS2
Molecular weight: 424.7
Physical property:
Melting point: 20 C
Appearance: White crystals or colorless to yellowish liquids
Specific gravity: 0.975-0.979 (20 C)
Viscosity: 80-90 mPa.s (20 C)
Technical Indicators:
Content (>98%)
Transmittance: 425 nm 95%
Antioxidant 1520 is a new high molecular weight liquid antioxidant, which has certain effect on the stability of rubber and adhesive compound. 1520, it can effectively prevent gel formation and prevent rubber color, molecular weight and viscosity changes during isolation, drying, storage and shipping. 1520 is effective even in rubber processing without the addition of phosphite (TNPP). But if necessary, adding phosphite will make the effect better. At the same time, 1520 can also be used in polymer or organic matrix, including thermoplastic elastomer, synthetic oil, etc.
Purpose:
This product is a rubber antioxidant. Mainly used in cis-butadiene rubber, styrene-butadiene rubber, ethylene propylene rubber, nitrile rubber, thermoplastic elastomer and other synthetic rubber, its dosage is small, antioxidant effect is good, can improve the stability of plastics or synthetic plastics. It belongs to environmental protection antioxidant, and realizes the transformation of rubber products from general type to environmental protection type. This product can also be used in lubricants, plastics and other polymer polymers, with excellent oxidation resistance.
Packing, storage, transportation and precautions:
Galvanized drum packing, net weight 200 kg;
The product should be stored in a clean and dry place to prevent rain.
When handling this product, strong rubbing should be avoided.

100% high tenacity polyester.
Thermo-fixation to minimize elongation and to stop ingression of dirt causing damage.
Colour coded as per en1492-1, and striped with wll indicator.
Full manufactured and tested to en 1492-1 standard.
Each sling is individually numbered with an unique serial number and certificate.
Available:
Safety factor of 8:1, 7:1 and 6:1 webbing slings.
Single ply, double ply or 4 ply slings in eyed or endless type.
With or without sling eye protection, also full sling length sewn webbing protection.


Shrink film packing

100% high tenacity polyester
Double ply sling wall cover to protect from wear and ingression of dirt causing damage
Colour coded as per en1492-2, and striped with wll indicator.
Full manufactured and tested to en 1492-2 standard.
Each sling is individually numbered with
An unique serial number and certificate.

Available:
Safety factor 7:1 and 6:1.
Single or double ply sling wall cover.
Concealed sewn label to protect label from tearing.
Larger sizes up to 50 tonnes sling also available upon request.


Shrink film

Properties white to light yellow powder , high gloss , low odor , good discoloration resistant , smoke inhibiting , easy incorporation and dispersion .
Application it 15 widely used in pvc plate , sheet and articles to improve the blow moldability , extrudability and calenderability in production and the service life of finished product . Its properties are superior to those of organic tin series heat stabilizer , but its cost is lower .



Pe bag with lined pe film

EVA Rubber Bags use a variety of plastic resins and a variety of additives blended together to change the plastic properties, to obtain new functional polymer materials.This new material through the extruder blown film having a low melting point, can be blended with the rubber-modified characteristics, and can be used as an active ingredient of rubber products.The product has good tensile strength, impact strength, puncture resistance, weather resistance, flexibility, and rubber-like elasticity.Mainly used in the batch processes of rubber industry, packaging of various chemicals needed for mixing ingredients (such as or oil, silica, carbon black, antioxidants, accelerators and a variety of small materials, etc.), putting into the mixing tank with the packaged ingredients directly , (no need to remove the bags) has no effect on rubber products (melt in rubber directly ).The use of such bags can play a role as follows: Packaging convenient, accurate measurement, reduce environmental pollution, reduce injury to staff.
EVA Rubber Bags' applicability: This product is mainly used in the tire industry, hose tape industry, shoes of all kinds of chemical raw materials, loading chemicals, such as: this product can put into mixing equipment with raw material together,such as mixer or mill the machine, mixed with rubber, together raw material melting with Natural rubber, styrene butadiene rubber, butadiene rubber, SSBR and other products,does not affect the quality of rubber products.

Special Rubber Vulcanizing Agent ACTOR-MTT CAS: 1908-87-8
ACTOR-MTT (3-methyl-2-Thiazolidinethion) is a thiazole carbazole compound, which contains active sulfur atoms and can cross-link halogen-containing polymers. It is especially suitable for vulcanization cross-linking of chlorinated butyl rubber, chloroprene rubber and chlorinated polyethylene rubber.
Date item (lot, No) 0028 (Date production) 20110528
Appearance / appearance of white crystal
White Powder Assy (HPLC)
Content%>80 Dissolves
Dissolves hot water
Soluble in hot water M, P (capillary pipe)
Melting point 55 C-65 C Water content (80 C, 12 hr dry weight loss)
Moisture% less than 0.40 Ash content (950 C, 2hr)
Ash% less than 0.40
Product uses:
1. MTT can be used as an efficient accelerator for chloroprene rubber. Compared with ETU, MTT maintained good physical properties and aging resistance of chloroprene vulcanized by ETU.
2. Chlorinated butyl rubber and natural rubber can be vulcanized by MTT, but the amount of natural rubber should not exceed 20%, and a higher amount of accelerator and a lower amount of magnesium oxide should be added.
3. Chlorinated butyl rubber and chloroprene rubber can be vulcanized effectively by MTT, so it is very suitable to use MTT to vulcanize them together.
4. The co-vulcanization of chlorinated butyl rubber (CBR) and natural rubber (NR) compounds is of particular significance to the tire industry. Good co-vulcanization bonding is required between the lining and matrix of CBR.
Advantage:
1. Compared with sulfur curing system, MTT can obtain excellent physical properties, lower compression set and heat generation, and excellent hot air aging properties in chlorobutyl rubber.
2. The hot air aging property of rubber products vulcanized by MTT is also better than that of resin vulcanization system. The product has a low melting point and is easy to disperse. It can be mixed efficiently even in an open smelter.
3. The scorching time and vulcanization time of MTT in chlorinated butyl rubber can be delayed by MBTS or CTP or accelerated by TMTD or ZDMC. It is not appropriate to use clay alone, but it can be used with carbon black. Silica is very easy to burn, whether it is used with carbon black or with carbon black.
4. In the blend of chlorinated butyl rubber and natural rubber, MTT vulcanization can be used if the content of natural rubber is not more than 20%. When blended with chloroprene rubber, it shows excellent vulcanization characteristics and maintains the unique advantages of MTT vulcanization system.
The chlorinated butyl rubber compound containing MTT can be co-vulcanized with natural rubber, and co-vulcanization improves the adhesion of chlorinated butyl rubber/natural rubber blends.
Packaging: 25KG/drum
Shelf life: sealed at room temperature for 12 months

Ionic character cationic
Appearance pale yellow flakes
PH Value 4.5~6.5
Solubility Soluble in water
Field of Application
Specialize in acrylic and synthetic fibre with very good softness and smoothness

z

NUHA BRITE BAC-L is optical brightener agent mainly used in high-grade synthetic detergent, super concentrated liquid detergent, can also be used for whitening soap, toilet soap.
The sun whitening resistance of textiles. z

specification:
Name Softener Flakes
Ionic character cationic
Appearance pale yellow flakes
PH Value 4.5-6.5
Solubility Soluble in water

Field of Application
For all kinds of fibers,especially for cotton,T/C and synthetic fiber

z

Kind of thermoplastic elastomer materials widely used in construction door and window sealing strips application made of SEBS rubber with PP granules It has rubber properties but can processing by normal plastic injection or extrusion machine Elastic and ageing-resistant property is much better than traditional PVC material, that is the tend PVC will replace by TPE, new generation materials.

Clients can avail from us superior quality PE Isolating Fresh Keeping Film which is mainly used in the production process of radial tyre and the essential auxiliary material for the production of radial tyre. In the processes of tread, tread top, tyre wall and tread bracing layer for radial tyre, the prefabricated rubber sheet is required; EMAIL: info@takon.com.cn Mob: 0086 15949883050 Sky/pe: summer.wang24 while this soft, stiff and neat isolating fresh-keeping film is the ideal material to keep the rubber sheet fresh, for it can be fully applied to the prefabricated rubber sheet, yet easy to peel.

Water-borne metal corrosion inhibitor DMTD-2NA
English Name: Disodium 1,3,4-thiadiazole-2,5-dithiolate
Chinese Name: 2,5-dimercaptothiadiazole disodium salt
CAS No. 55906-42-8
Molecular formula: C2N2Na2S3
Molecular weight: 194.20934
Uses: Organic synthetic intermediates, pharmaceutical intermediates
Packing: 25kg/drum
Appearance of original white powder
Content (%) 99.2
Specification
Moisture (%) 0.3
Purity (%) 99

Factory Price Rubber Covered Dumbbells, barbels
From 2.5KG 5kgs 7.510kgs 10KG 12.5KG 15kgs 20KG 22.5KGS OR customization

Customer color and logo

Thermoplastic polyurethane elastomer(TPU) is a kind of production process without curing,non-toxic,tasteless, corrosion, resistance , oxidation resistance of new environment products.It replace of rubber and plastics, and excelled rubber and plastics in the indexs of acid and alkali resistance, aging resistance, strength, lifetime. It great memanded in internation and domestic.Products are widely used in shoes, cable ,clothing, accessories, mobile phone casing, tubing, medical cathether, sports equipment, hardware,communication, food packaging and military, aerospace and other fields.

1)synthetic silk fibre:0.1mm, 0.12mm, 0.15mm, 0.20mm, 0.25m, five kinds.
2)length: 6mm~15mm
3)package¡êocommon case(white, pink);high-grade case(black, pink, white;transparent case
4)quantity¡êo16tapes per case¡ê¡§customized¡ê©
5)curl¡êoj , b , c , d etc.
6)moq¡êo10cases, kind

Common case(white, pink);high-grade case(black, pink, white;transparent case

Level resistance >=15T
Max. impact velocity 20km/h
Distance between buffer rubber plate center and rail level 850±20mm

1)synthetic silk material:0.07mm, 0.1mm, 0.12mm, 0.15mm, 0.20mm, 0.25m, 0.3mm seven kinds.
2)length: 6mm~15mm
3)package¡êocommon case(white/pink);high-grade case(black/pink/white;transparent case
4)quantity¡êo12tapes per case¡ê¡§customized¡ê©
5)curl¡êoj , b , c , d etc.
6)moq¡êo10cases/kind

Common case(white/pink);high-grade case(black/pink/white;transparent case