Find Verified Dragon Fruit Suppliers, Manufacturers and Wholesalers

Fresh premium bananas and second class bananas.

Durometer

The cross-pointing durometer uses the cross-pointing structure the merit:
When examination does not need to act according to the survey angle the change, real-time observation value, so long as after surveying, the driven indicator locates directly in the survey numberical scale, facilitates reads, eliminates the error which produces because of observation angle's change

Pp woven bag

We can supply a variety of pp bags.
Features:
1) material: pp and pe material
2) for packing various things, such as rice, flour, fruits and vegetables


Various sizes and colors available

Common name: lmazalil
Chemical name: 1-[2,(2,4-dichlorophenyl)-2-(2-propenyloxy)ethyl]-1H-imidazole
Molecular formula: C14H14CI2N2O
Molecular weight: 297.2

Physical chemistry:Form Slightly yellow to brown crystalline mass.M.p.52.7 B.p.>340 V.P.0.158mPa. S.g./density 1.348g/ml(26).Solubility In water 0.18g/l(Ph7.6 20).In acetone dichloromethane, ethanol, methanol, isopropanol, xylene, toluene.benzene>500,hexane 19(all in g/l, 20).Also soluble in heptane and petroleum ether.

Use: Control of a wide range of fungal diseases on fruit,vegetables,and ornamentals. e.g.powdery mildews on cucurbits and ornamentals;powdery mildew on roses;storage diseases(particularly Penicillum,Gloeosporium,Phomopsis,Phoma spp.,etc)of citrus frut,pome fruit,bananas,and seed potatos.Also used as a seed dressing,for control of diseases(particularly Fusarium and Helminthosporium spp.)of cereals.It is particularly active against benzimidazole-resistant strains of plant-pathogenic fungi.Typical use rate are:for seed treatment 4-5g a.i./100kg seed;for ornamentals and vegetables 5-30g/hl;and for post-havest treatment 2-4g/t fruit.

50% EC:200L/ Iron drum, 75% SP,97% TECH:25Kg/Fiber drum.

Natural pressed bones
Material: rawhide or porkhide
Size: 5"*5-6mm 5"*7-8mm 5"*9-10mm
Milk, fruit, smoked, natural flavors
Country of Origin:
China (mainland)
Primary Competitive Advantages:
"Green" Product

As your request to packing

Common name: Oxyfluorfen

Chemical name: 2-Chrolo-|¨¢,|¨¢,|¨¢-trifluoro-p-totyl-3-ethoxy-4-nitrophenyl ethyl

Molecular formula: C15H11CIF3NO4

Molecular Weight: 361.7.

Physical chemistry: Form slight yellow powder, S.g./density 1.35(73), M.p.85-90; (tech,.65-84) V.p.(pure a.i)0.0267 mPa(25). Solubility In water 0.116mg/l(25). Readily soluble in most organi solvents,e.g.acetone 72.5,cyclohexanone,isophorone 61.5,dimethylformamide>50,chloroform 50-55,mesityl oxide 40-50(all in g/100g,25), Decomposed rapidly by u.v.Irradiation.

Use: Control of annual broad-leaved weeds and grasses in a variety of tropical and subtropical crops,by pre- or post-emergence application at rates in the range0.25-2.0kg a.i./ha.Particular crops include tree fruit(including citrus), vines, nuts, cereals, maize, soya beans, peanuts, rice,cotton,bananas,peppermint,onions,garlic,ornamental trees and shrubs,and conifer seedbeds.When it is used in the field of fruit it can be mixed with Glyphosate to strengthen the efficiency.

24% EC 200L/ Iron drum, 97%TECH: 25Kg/Fiber drum.

Common name: Oxyfluorfen

Chemical name: 2-Chrolo-trifluoro-p-totyl-3-ethoxy-4-nitrophenyl ethyl

Molecular formula: C15H11CIF3NO4

Molecular Weight: 361.7

Physical chemistry: Form slight yellow powder, S.g./density 1.35(73¡æ), M.p.85-90¡æ; (tech,.65-84¡æ) V.p.(pure a.i)0.0267 mPa(25¡æ). Solubility In water 0.116mg/l(25¡æ). Readily soluble in most organi solvents,e.g.acetone 72.5,cyclohexanone,isophorone 61.5,dimethylformamide>50,chloroform 50-55,mesityl oxide 40-50(all in g/100g,25¡æ), Decomposed rapidly by u.v.Irradiation.Control of annual

used on broad-leaved weeds and grasses in a variety of tropical and subtropical crops,by pre- or post-emergence application at rates in the range0.25-2.0kg a.i./ha.Particular crops include tree fruit(including citrus), vines, nuts, cereals, maize, soya beans, peanuts, rice,cotton,bananas,peppermint,onions,garlic,ornamental trees and shrubs,and conifer seedbeds.When it is used in the field of fruit it can be mixed with Glyphosate to strengthen the efficiency

25kg/fiber drum.

Feature:

This kind of product is adopted newest geniii leds as head or tail light. Available in 1, 2 &4 head configurations, mounts inside head or tail light clusters.

System can be separately, hot water washing cuases pickling, etc, also can be compiled according to the need for automatic cleaning procedures specific cleaning, not only can effectively clean equipment, but also can control microbial growth, also may according to the customer request configuration, and automatic control system, semiautomatic

Soft cloth & plywoodcase

Traffic lock, cable lock, smoke color, fashion . Easy to operate. Each lock has a instruction figure on back side of package.

ESecond, the machine main components
The machine consists of corrective unwinding institutions, cutting structure, the rolling bodies, transmission and electrical control.
Agencies main configuration and specifications
(A) unwinding institutions
The device has a manual aspect of offset can be eliminated due to the tension of raw material at both ends arising from Bohou or paper core non-circularity different and wrinkled.
Unwinding tension to the high linear magnetic powder brake actuator output torque balancing the tension fluctuation can be reduced to a minimum.

Unwinding specifications: maximum width of700mm, phi diameter 1000mm
Paper tube clamping method: air shaft clamping
  Specifications: 3in 1 root of the air shaft 1 piece
         A pneumatic gun 1 piece
Tension control: closed-loop tension control.
      The output control: 200N.M 1 piece
magnetic brakes 1 piece
Correction perform: tracking the substrate by the photoelectric eye correction controller for a given signal, the motor drive ball screw execution.
  Specifications: photoelectric eye 1 piece
         Two linear bearings4 piece
         A corrective institutions 1 piece
         The photoelectric eye fine-tuning 1 sets

(b) the rolling bodies
The agency uses the left-right axis biaxial winding winding with pressure arm balance internal and external pressure. The transmission uses two independent magnetic particle motor drive uniaxial tension adjustable.
Winding Specifications: width up to 700mm, diameter 600mmï¼?or diameter 420mmï¼?
Paper tube clamping means: air shaft clamp (according to customer material specifications)
Specifications: 3in 2 root of the air shaft
Rewinding pressure: differential pressure pneumatic compression, the pressure can be adjusted by pneumatic pressure regulator
Specifications: Pressure arm 2
      Cylinder 2
Tension control: magnetic motor constant torque output
Specifications: motor controller
Winding execution: magnetic motor 2 (specifications 50N.M) Single head swing arm unloadingï¼?Or general dischargeï¼?
(D) transmission mechanism
The inverter is used to control the main motor operation, convenient lifting speed, the speed adjustment the excessive soft, smooth.
Drive mode: General inverter control of AC motor drive
Specification: 7.5KW exchange motor
      Supporting inverters (domestic well-known brand, quality assurance)
(E) Major appliances:
Centrally electric control cabinet box, elegant, and easy to operate.
Operation of a cabinet
Comptroller display a realistic real-time linear velocity, Hutchison meters automatic stop function (with deceleration stop function, Hutchison Mickey the error)
Optical correction controller 1
Button, contactors, air switches
Users themselves:
1.50 Hz, 380V three-phase five-wire power supply
2 foundation treatment
Mounting equipment and commissioning of the raw materials, auxiliary
quipment effective width 700MM, mechanical speed 150M/min

Ideal in fields such as foods, dairy products, fruit juice beverages, pharmacy, chemical industry and biological engineering etc.

Structure characteristics:
Made of single-layer stainless steel structure.
Materials are all sanitary stainless steel.
Humanized structure design and easy to operate.Transition area of interior wall on tank adopts arc for transition to ensure no dead comer of sanitation.

Configuration of tank:
Quick open manhole.
Various types of CIP cleaners.
Fly and insect resistant sanitary breathing cover.
Adjustable triangular bracket.
Dismountable materials input pipe assembly
Thermometer (According to customer requirements ).
Ladder (According to customer requirements).
Paddle blender.
Liquid level meter and lever controller (According to customer requirements).
Eddy-proof board.
Customized and Non-standard products also welcomed.

Common Name: Profenofos
Chemical Name: (RS)-O-4-bromo-2-chlorophenyl O-ethyl S-propyl phosphorothioate
Molecular Formula: C11H15BrClO3PS
Molecular Weight:373.6

Physical Chemistry:
Yellowsish liquid.Boiling point:110 at 0.001 mm Hg.Flash point:167.Vapor Pressure:1.24 x 10-4 pa at 25. Solubility:In water 20 mg/litre at 20; 25 mg/litre at 25.Readily miscible with most organic solvents. Stability: stable under neutral and slightly acid conditions, unstable under alkaline condition.

Profenofos is a pesticide of thiophosphate series.It is a wide-spectrum insecticide with easy biodegradation and a high bioactivity for antiloxic pests.It can be used to control pests in cotton,fruit trees and vegetables with an excellent effect on cotton.


250kg/Drum for 95%TC, 200L/Drum for 40%, 50%EC.

Name Propamocarb hydrochloride
Synonyms Propyl [3-(dimethylamino)propyl]carbamate hydrochloride

Molecular Formula C9H20N2O2.HCl
Molecular Weight 224.73
Use: Specific control of Phycomycetes. As a foliar spray, at 0.5-2.2 kg/ha against Phytophthora infestans on tomatoes and potatoes, at 1.1-2.2 kg/ha against Bremia lactucae on lettuce, at 0.75-3.6 kg/ha against Peronospora spp. on cabbages, and at 7-11 kg/ha against Pythium aphanidermatum on turf; as a foliar spray or by drip irrigation, at 1.1-2.7 kg/ha against Pythium spp. and Phytophthora spp. on ornamentals, and at 0.7-3.6 kg/ha against Pythium spp. and Phytophthora spp. on fruiting vegetables (cucurbits, tomatoes, peppers, ect); and as a drench, at 22-43 kg/ha against Pythium spp. and Phytophthora spp. on vegetable seedbeds.

200L/drum.

Specification:
1.Capacity:100L-10000L
2.Materical:SS304 and SS316
3.Single layer/double layers /three layers
4.Polished inside and outside
5.Open cover type/seal type

Applicable range:
1.Ideal in fields such as foods,dairy products,fruit juice beverages,pharmacy,chemical industry and biological engineering etc.

Principle
Centrifugal speed emulsification head can produce a great suction force during rotation of the work,the rotor is rotating above the absorbent material,and then thrown into the high-speed stator , through rotatio between the stator high shear,impact,crushing,the material collection to the outlet ejected .Bottom of the tank while preventing the rotational force of the vortex baffle into the upper and l ower churn force,so that the material mixing tank,the liquid level to prevent the accumulation of agglomerated powder , and achieve the purpose of the hydrated emulsion .

Four-shuttle Circular Loom for Mesh Bag

There are four series of circular looms with nine models manufactured by our factory and they separately adopt the structures of band, pole and rocker, in which the shuttle board movement of six and eight-shuttle circular looms has changed the traditional slipping friction into rolling friction so as to reduce friction and noise and improve speed as well .
Four-shuttle circular loom can weave woven bags of different specifications, and six-and eight- shuttle circular looms can weave container bags, tarpaulin, awing cloth for rainpro of and tourism tent etc. and the circular loom for mesh bag etc and the circular loom for mesh bag can weave bag for packing vegetables and fruit.
With a long history of manufacturing circular looms, our factory has got abundant experience and has been improving and developing old and new product continually to make them more perfect ., we successfully developed the
four-shuttle circular loom for mesh bag. All the circular looms made by our factory equipped with no-brush shuttle made by us. Our circular looms have the advantages of high production efficiency, low noise ,economical power consumption.

It is working capacity 1500Litre Steam heated pharmacy mixing tank for fruit juice,Material:All Inner&outer contact parts are made of SS304,elliptical seal on top&bottom for well discharge,3-walls with a full jacket for conduction oil heating and Rockwool insulation;Equipped with ONE complete set of agitator impeller mixer,including one 2.2KW Motor,speed 1400rpm for gentle stirring.The others accessories as a CIP automatic-rotating cleaning ball inside,one Inlet,spare holes,one manway,one ordinary thermometer(0-150C),one ordinary pressure gauge,one medium inlet,one medium outlet on jacket,one bottom bulit on electric heater pipes,one outlet&discharge valve can be with tri-clamped,three adjustable support legs etc which per the final drawing.One control box for Power On/Off;Mixing On/Off;Temperature& Pressure display so on which per our standard.Inner thickness 4mm,inner working pressure 0.1MPa;Jacket Thickness 3mm, Jacket normal pressure;Insulation layer 50mm,outer surface 2mm.Inner&outer mirror polish.

Application
The pump is mainly used to deal with the convey of gas-bearing materials. So it is widely used in the occasions that the liquid level is instable,and the liquid level is lower than that of inlet to draw the material ,and also used as return in the CIP system .And it is the necessary convey equipment in the food,chemical ,pharmacy field.

Functions and specifications
The design adopt the side channel principle leading to the excellent suction,sanitariality ,low
power ,lower noise ,easy to clean ,and low cost to maintenance .
shaft sealing
YUY sanitary priming pump seal is mechanical seal ,include the stationary ring SUS316L steel embedded in graphite structure ,and the movable ring made of silicon carbide .
Material
All the part contact with medium ,pump case.pump cover and impeller are made of AISI316L stainless steel .
The part contact with medium:AISI316L stainless steel
Other parts:AISI304 stainless steel
The sealing contact with medium:EPDM
Surface treatment
The part contact with medium is polished ,and other part is glass painted or sand blasted treatment.
Data sheet
Max Inlet Pressure:0.5Mpa
Temperature Range:-10¡ãC to +140¡ãC(EPDM)
flushed mechanical seal:
water pressure:Max0.1MPa
water consumption:0.25-0.5L/min

Motor
I)According to the configuration ,we adapt three phase¡°ABB¡±brand AC motor. The motor design according to the International Electronic Commission IEC 60034.IEC60072,and comply with the EC requirements of ¡°CE¡±marking requirement .

II).The explosion-proof motor also available ,that can meet with the requirement of different
applications .
III)It with excellent electric performance ,and with low noise,low vibration,the protection grade is
IP55,insulation grade is F.
Iv) The operate in voltage
¡Ü3Kw,220-240V/380-420V,
3Kw,380-420V/660-690V,
v)Frequency
50Hz/60Hz

VI)Operate way :Continuously

VII)Running Speed : 2900r/min


wood box.

Specifications :
Application:Belong to a turbine the diversion centrifugal pump can extract the liqiud of the vacuum tank under the pressure of negative pressure 0.09Mpa .

Spec:3T-180T,0.75KW-75KW
Material:SUS304  SUS316L (the pump body,pump cover,impellerwhich is contact with medium material ,made of stainless steel SUS316L and SUSI304
Standard:DIN, SMS
Impeller:Open type impeller ,semi-close type impeller
Surface treatment:The parts contacted with medium is polished
Working condition;sanitary centrifugal pumps is a high and low level transmission ,as well as the level transmission ,and has a amount of suction .
The max pressure of inlet:0.5MPa
Temperature range:-10C to +140C(EPDM)
washable mechanical sealing:
water pressure:Max 0.1MPa
flow rate:0.25-0.5L/min

Motor:
I. Configuration of "ABB" brand three-phase AC motor is in accordance with the International Electro-technical CommissionIEC60034.IEC60072 standard design comply with European "CE" marking requirements
II. The explosion-proof motor also available ,that can meet with the requirement of different applications .
III.It with excellent electric performance ,and with low noise,low vibration,the protection grade is IP55,insulation grade is F.
IIII.Operate in voltage:
3Kw,220-240V/380-420V,
¡Ý3Kw,380-420V/660-690V,
IV.frequency:50Hz/60Hz
V. working method:continuous(SI)
VI.rotate speed:the standard rotate speed is 2900r/min.


wood box.

Application
The pump is mainly used to deal with the convey of gas-bearing materials. So it is widely used in the occasions that the liquid level is instable,and the liquid level is lower than that of inlet to draw the material ,and also used as return in the CIP system .And it is the necessary convey equipment in the food,chemical ,pharmacy field.

Functions and specifications
The design adopt the side channel principle leading to the excellent suction,sanitariality ,low
power ,lower noise ,easy to clean ,and low cost to maintenance .
shaft sealing
YUY sanitary priming pump seal is mechanical seal ,include the stationary ring SUS316L steel embedded in graphite structure ,and the movable ring made of silicon carbide .
Material
All the part contact with medium ,pump case.pump cover and impeller are made of AISI316L stainless steel .
The part contact with medium:AISI316L stainless steel
Other parts:AISI304 stainless steel
The sealing contact with medium:EPDM
Surface treatment
The part contact with medium is polished ,and other part is glass painted or sand blasted treatment.
Data sheet
Max Inlet Pressure:0.5Mpa
Temperature Range:-10¡ãC to +140¡ãC(EPDM)
flushed mechanical seal:
water pressure:Max0.1MPa
water consumption:0.25-0.5L/min

Motor
I)According to the configuration ,we adapt three phase¡°ABB¡±brand AC motor. The motor design according to the International Electronic Commission IEC 60034.IEC60072,and comply with the EC requirements of ¡°CE¡±marking requirement .

II).The explosion-proof motor also available ,that can meet with the requirement of different
applications .
III)It with excellent electric performance ,and with low noise,low vibration,the protection grade is
IP55,insulation grade is F.
Iv) The operate in voltage
¡Ü3Kw,220-240V/380-420V,
3Kw,380-420V/660-690V,
v)Frequency
50Hz/60Hz

VI)Operate way :Continuously

VII)Running Speed : 2900r/min


wood box.

The CVP-SM Series is a low cost, miniature, hydraulic-magnetic circuit breaker which features a compact, space saving design, front panel snap-in mounting and a vertically mounted parallel pole configuration. It features various styling options to maximize your design flexibility. Choices include rocker, illuminated rocker, paddle and baton style handle actuators, push-to-reset and push-pull pushbutton actuators, as well as Visi-Rocker two color actuators. Our exclusive Rockerguard bezel helps prevent inadvertent actuation and a wiping contact mechanism assures long-term reliability.Insulation Resistance 100M at 500V DC,Dielectric Strength:1500V,50/60Hz between terminals for eletrical 50/60Hz, Temperature Operation -40 to +85 Elevational 3000m.

Automatic die cutting machine R-850 Automatic Roll Die Cutting Machine is a kind of machine to make different shape half finished paper product or finished product for food paper containers.it is very popular and well sold in both home and overseas market. such as roll paper to paper cup fan.
1.using imported electric eye tracking servo motor feeding, ensure the feed speed and die-cutting speed synchronization.
2. according to the figure after printing die cutting or no text pattern die cutting, can be used to
identify the color of light magic eye with servo motor, guarantee after printing product die-cutting
die cutting location and pattern of perfectly.Die cutting for no printing products, as long as the die
3.cutting length can be on the microcomputer controller Settings.
die cutting knife size is 880 mm * 283 mm (also can be made according to user requirements).
4.the highest die cutting speed can reach 12000 times per hour, has a very high production efficiency.
5. die shear force provided by the 4 kw variable frequency motor, not only save electricity and can realize
stepless speed regulation, particularly with large flywheel to cooperate, make the die shear is large and stable,
and further to save electricity.
6.adopts flat die cutting method, cutter plate for cheap.

Automatic drinking straw packing machineUsage: 1.The machine is to pack the single straw. It can be used  paper or film to packing straight straw.flexible straw.spoon straw.milk tea straw,The machine provides a high packing rate ,and two-color printing capacity. It not only makes your straw packing operation easier,but also provides you with a high reliability.2.This machine is a full automatic for packing single-straw into package machine. The machine is composed of motor, film supporting assembly(2 set),straw feeding section, sealing section, coiling section and electronic controlled system etc.The main drum always carrying a lot of straws in successive different operations. This provides a high packing rate, and incorporates an automatic. To complete filling in & packing at a time. It not only makes your straw packing operations easier, but provides you with a highly reliable.3.Highlight:� Single drinking straw packing. printing, filling& packing,cutting at a time � Two color printing device� Automatic product counting ,product quantity per-set. Once the pre-set figure is reached, the machine will stop and an alarm will sound� Packing speed can be adjusted freelyMax. packing speed600 pieces/minutespacking stylethree side seal packing stylematerialFilm and paperStraw size5-13mmPacking length130-270mmMain motorWannaInverterDeltaAc contactorSchneiderTemperature controlleryatairelayMagarBearingHaerbin / NSKPneumatic parts  Airtac

Automatic drinking straw packing machineUsage: 1.The machine is to pack the single straw. It can be used  paper or film to packing straight straw.flexible straw.spoon straw.milk tea straw,The machine provides a high packing rate ,and two-color printing capacity. It not only makes your straw packing operation easier,but also provides you with a high reliability.2.This machine is a full automatic for packing single-straw into package machine. The machine is composed of motor, film supporting assembly(2 set),straw feeding section, sealing section, coiling section and electronic controlled system etc.The main drum always carrying a lot of straws in successive different operations. This provides a high packing rate, and incorporates an automatic. To complete filling in & packing at a time. It not only makes your straw packing operations easier, but provides you with a highly reliable.3.Highlight:� Single drinking straw packing. printing, filling& packing,cutting at a time � Two color printing device� Automatic product counting ,product quantity per-set. Once the pre-set figure is reached, the machine will stop and an alarm will sound� Packing speed can be adjusted freelyMax. packing speed600 pieces/minutespacking stylethree side seal packing stylematerialFilm and paperStraw size5-13mmPacking length130-270mmMain motorWannaInverterDeltaAc contactorSchneiderTemperature controlleryatairelayMagarBearingHaerbin / NSKPneumatic parts  Airtac

ESecond, the machine main components
The machine consists of corrective unwinding institutions, cutting structure, the rolling bodies, transmission and electrical control.
Agencies main configuration and specifications
(A) unwinding institutions
The device has a manual aspect of offset can be eliminated due to the tension of raw material at both ends arising from Bohou or paper core non-circularity different and wrinkled.
Unwinding tension to the high linear magnetic powder brake actuator output torque balancing the tension fluctuation can be reduced to a minimum.

Unwinding specifications: maximum width of700mm, phi diameter 1000mm
Paper tube clamping method: air shaft clamping
  Specifications: 3in 1 root of the air shaft 1 piece
         A pneumatic gun 1 piece
Tension control: closed-loop tension control.
      The output control: 200N.M 1 piece
magnetic brakes 1 piece
Correction perform: tracking the substrate by the photoelectric eye correction controller for a given signal, the motor drive ball screw execution.
  Specifications: photoelectric eye 1 piece
         Two linear bearings4 piece
         A corrective institutions 1 piece
         The photoelectric eye fine-tuning 1 sets
(B) cutting machine configuration
 M, mechanical speed 150M/min

Characteristics:
1.Driving by synchronous belt,ensure smooth and accurate running.
2.Inverter driving,stable and power saving.
3.Use electric adjust,easy operate.
4.Automatic continuous feeding,use multiple belt with vibrating motor,(for higher configuration use drilled suction belt),to keep the feeding stable.
5.Automatic counting and kicking,quantity can preset.
6.Conveyer pressure adjustable according to the box to ensure best quality.

Characteristics:
1.Driving by synchronous belt,ensure smooth and accurate running.
2.Inverter driving,stable and power saving.
3.Use electric adjust,easy operate.
4.Automatic continuous feeding,use multiple belt with vibrating motor,(for higher configuration use drilled suction belt),to keep the feeding stable.
5.Automatic counting and kicking,quantity can preset.
6.Conveyer pressure adjustable according to the box to ensure best quality.

2. Main technical parameter:
Model ZH-A1100PC
Suitable material Card board,E flute corrugated board
Max method Automatic continuous feeding
Max mechanical speed 450m/min
Overall dimension 15500*1700*1800mm
Weight 8T
Power consumption 19KW

3.Standard & Optional configuration list
Configuration Units Standard Optional
1 Feeder section
2 Paper Alignment Section
3 Pre-fold Section
4 Crash lock bottom section
5 Upper paste barrel equipment
6 Down pasting equipment
7 Gluing system
8 Grinder device
9 Plasma treatment system
10 Folding and closing section
11 Trombone section
12 Air compressor
13 4-6 corner

Characteristics:
1.Driving by synchronous belt,ensure smooth and accurate running.
2.Inverter driving,stable and power saving.
3.Use electric adjust,easy operate.
4.Automatic continuous feeding,use multiple belt with vibrating motor,(for higher configuration use drilled suction belt),to keep the feeding stable.
5.Automatic counting and kicking,quantity can preset.
6.Conveyer pressure adjustable according to the box to ensure best quality.

2. Main technical parameter:
Model ZH-A1100PC
Suitable material Card board,E flute corrugated board
Max method Automatic continuous feeding
Max mechanical speed 450m/min
Overall dimension 15500*1700*1800mm
Weight 8T
Power consumption 19KW

3.Standard & Optional configuration list
Configuration Units Standard Optional
1 Feeder section
2 Paper Alignment Section
3 Pre-fold Section
4 Crash lock bottom section
5 Upper paste barrel equipment
6 Down pasting equipment
7 Gluing system
8 Grinder device
9 Plasma treatment system
10 Folding and closing section
11 Trombone section
12 Air compressor
13 4-6 corner

ESecond, the machine main components
The machine consists of corrective unwinding institutions, cutting structure, the rolling bodies, transmission and electrical control.
Agencies main configuration and specifications
(A) unwinding institutions
The device has a manual aspect of offset can be eliminated due to the tension of raw material at both ends arising from Bohou or paper core non-circularity different and wrinkled.
Unwinding tension to the high linear magnetic powder brake actuator output torque balancing the tension fluctuation can be reduced to a minimum.

Unwinding specifications: maximum width of700mm, phi diameter 1000mm
Paper tube clamping method: air shaft clamping
  Specifications: 3in 1 root of the air shaft 1 piece
         A pneumatic gun 1 piece
Tension control: closed-loop tension control.
      The output control: 200N.M 1 piece
magnetic brakes 1 piece
Correction perform: tracking the substrate by the photoelectric eye correction controller for a given signal, the motor drive ball screw execution.
  Specifications: photoelectric eye 1 piece
         Two linear bearings4 piece
         A corrective institutions 1 piece
         The photoelectric eye fine-tuning 1 sets
(B) cutting machine configuration
  The agency uses carbide precision disc disc knife (slitting relatively thick aluminum foil, paper and other materials) or (and) straight knife cutting (slitting general plastic film), neat incision, long life, cutting up and down knife shaft width adjustment processing, between the upper and lower blade shaft gear speed matching. Turning the handwheel implementation under the knife, the knife continues to rotate automatically rely.
Tool axis: under the knife shaft each one
2 locking device: a fast by knife device, able to lock on the knife shaft, to avoid slitting knife from the up and down or move due to quality problems.
Specifications: a rocker arm
           A locking shaft
           With gear
           A worm gear
3. Row waste: by blowing high pressure air feed tube diversion, the scrap material to exclude
   Specifications: 1 fan

ESecond, the machine main components
The machine consists of corrective unwinding institutions, cutting structure, the rolling bodies, transmission and electrical control.
Agencies main configuration and specifications
(A) unwinding institutions
The device has a manual aspect of offset can be eliminated due to the tension of raw material at both ends arising from Bohou or paper core non-circularity different and wrinkled.
Unwinding tension to the high linear magnetic powder brake actuator output torque balancing the tension fluctuation can be reduced to a minimum.

Unwinding specifications: maximum width of700mm, phi diameter 1000mm
Paper tube clamping method: air shaft clamping
  Specifications: 3in 1 root of the air shaft 1 piece
         A pneumatic gun 1 piece
Tension control: closed-loop tension control.
      The output control: 200N.M 1 piece
magnetic brakes 1 piece
Correction perform: tracking the substrate by the photoelectric eye correction controller for a given signal, the motor drive ball screw execution.
  Specifications: photoelectric eye 1 piece
         Two linear bearings4 piece
         A corrective institutions 1 piece
         The photoelectric eye fine-tuning 1 sets

ESecond, the machine main components
The machine consists of corrective unwinding institutions, cutting structure, the rolling bodies, transmission and electrical control.
Agencies main configuration and specifications
(A) unwinding institutions
The device has a manual aspect of offset can be eliminated due to the tension of raw material at both ends arising from Bohou or paper core non-circularity different and wrinkled.
Unwinding tension to the high linear magnetic powder brake actuator output torque balancing the tension fluctuation can be reduced to a minimum.

ESecond, the machine main components
The machine consists of corrective unwinding institutions, cutting structure, the rolling bodies, transmission and electrical control.
Agencies main configuration and specifications
(A) unwinding institutions
The device has a manual aspect of offset can be eliminated due to the tension of raw material at both ends arising from Bohou or paper core non-circularity different and wrinkled.
Unwinding tension to the high linear magnetic powder brake actuator output torque balancing the tension fluctuation can be reduced to a minimum.

ESecond, the machine main components
The machine consists of corrective unwinding institutions, cutting structure, the rolling bodies, transmission and electrical control.
Agencies main configuration and specifications
(A) unwinding institutions
The device has a manual aspect of offset can be eliminated due to the tension of raw material at both ends arising from Bohou or paper core non-circularity different and wrinkled.
Unwinding tension to the high linear magnetic powder brake actuator output torque balancing the tension fluctuation can be reduced to a minimum.

ESecond, the machine main components
The machine consists of corrective unwinding institutions, cutting structure, the rolling bodies, transmission and electrical control.
Agencies main configuration and specifications
(A) unwinding institutions
The device has a manual aspect of offset can be eliminated due to the tension of raw material at both ends arising from Bohou or paper core non-circularity different and wrinkled.
Unwinding tension to the high linear magnetic powder brake actuator output torque balancing the tension fluctuation can be reduced to a minimum.

ESecond, the machine main components
The machine consists of corrective unwinding institutions, cutting structure, the rolling bodies, transmission and electrical control.
Agencies main configuration and specifications
(A) unwinding institutions
The device has a manual aspect of offset can be eliminated due to the tension of raw material at both ends arising from Bohou or paper core non-circularity different and wrinkled.
Unwinding tension to the high linear magnetic powder brake actuator output torque balancing the tension fluctuation can be reduced to a minimum.

Unwinding specifications: maximum width of700mm, phi diameter 1000mm
Paper tube clamping method: air shaft clamping
  Specifications: 3in 1 root of the air shaft 1 piece

ESecond, the machine main components
The machine consists of corrective unwinding institutions, cutting structure, the rolling bodies, transmission and electrical control.
Agencies main configuration and specifications
Agencies main configuration and specifications
(A) unwinding institutions
The device has a manual aspect of offset can be eliminated due to the tension of raw material at both ends arising from Bohou or paper core non-circularity different and wrinkled.
Unwinding tension to the high linear magnetic powder brake actuator output torque balancing the tension fluctuation can be reduced to a minimum.

Characteristics:
1.Driving by synchronous belt,ensure smooth and accurate running.
2.Inverter driving,stable and power saving.
3.Use electric adjust,easy operate.
4.Automatic continuous feeding,use multiple belt with vibrating motor,(for higher configuration use drilled suction belt),to keep the feeding stable.
5.Automatic counting and kicking,quantity can preset.
6.Conveyer pressure adjustable according to the box to ensure best quality.

2. Main technical parameter:
Model ZH-A1100PC
Suitable material Card board,E flute corrugated board
Max method Automatic continuous feeding
Max mechanical speed 450m/min
Overall dimension 15500*1700*1800mm
Weight 8T
Power consumption 19KW

3.Standard & Optional configuration list
Configuration Units Standard Optional
1 Feeder section
2 Paper Alignment Section
3 Pre-fold Section
4 Crash lock bottom section
5 Upper paste barrel equipment
6 Down pasting equipment
7 Gluing system
8 Grinder device
9 Plasma treatment system
10 Folding and closing section
11 Trombone section
12 Air compressor
13 4-6 corner


ermany

Characteristics:
1.Driving by synchronous belt,ensure smooth and accurate running.
2.Inverter driving,stable and power saving.
3.Use electric adjust,easy operate.
4.Automatic continuous feeding,use multiple belt with vibrating motor,(for higher configuration use drilled suction belt),to keep the feeding stable.
5.Automatic counting and kicking,quantity can preset.
6.Conveyer pressure adjustable according to the box to ensure best quality.

2. Main technical parameter:
Model ZH-A1100PC
Suitable material Card board,E flute corrugated board
Max method Automatic continuous feeding
Max mechanical speed 450m/min
Overall dimension 15500*1700*1800mm
Weight 8T
Power consumption 19KW

3.Standard & Optional configuration list
Configuration Units Standard Optional
1 Feeder section
2 Paper Alignment Section
3 Pre-fold Section
4 Crash lock bottom section
5 Upper paste barrel equipment
6 Down pasting equipment
7 Gluing system
8 Grinder device
9 Plasma treatment system
10 Folding and closing section
11 Trombone section
12 Air compressor
13 4-6 corner

Product Introduction
This Machine is suitable for producing different sizes ofpaper straws, such as 5mm; 6mm; 8mm, 10mm etc.
1. Adopted with PLC controller, main motor is equipped with variable frequency speed regulation, touch screen man-machine interface.Easy for parameters setting & operating.
2. Cutting section adopted with numerical multi-blades cutting system.Servo synchronous tracking cutting system makes it higher precisionand multi-blades cutting makes it higher efficiency
3. Machine body and main spare parts made by stainless steel instead of painting. Ensure the hygiene and environmental protection of the products.
What Technical of our machine?
CFXG-5002 Multi-cutters Paper Straw Machine
Technical Parameter Control System
Paper Layer 3 layers Motor 3.0kw (1.5kw * 2pcs)
Inner Diameter 5-12mm Motion Controller Panel Master
Wall Thickness 0.3-1mm Operating Panel Panel Master
Stable Speed 1-40m/min. Language English
Winding Nose Two noses single belt Inverter 3.7kw Schneider
Machine & parts Painting Electric Components Schneider
Length fixing Encoder Pneumatic Components Jingwei
Speed Control By Inverter Servo Motor Schneider
Cutting System Multi-blades; 5 pcs online Servo Driver Schneider
Synchronism tracking cutting system Servo motor synchronism tracking Screw Rod Shangyin
Slider Shangyin
Paper straw collecting Manually Bearing Haerbin
Operator 1-2 person Configuration
Working Air Pressure 0.6Mpa Paper Reel Stand 3 Layers
Power Supply 380V / 3phases / 50 Hz Gluing Unit 3 Layers
Measurement & Weight Belt 5 Pieces
Measurement 3500*1500*1200mm Mandrel Shaft 2 Pieces
Working Space 7000*5000mm Extra blades 5 Pieces
Weight 1300kgs Useful Tool 1 Set

Automatic Roll Embossing Machine model YW-AZ is automatic equipment with mechanical, electrical and hydraulic system. It is suitable for embossing all kinds of paper and plastic film rolls into exquisite design. It adopts automatic hydraulic lifting system, automatic heating and cooling system, frequency converter to control speed, automatic tension control system and automatic hydraulic system etc.

Main configuration:
PLC control, HMI
Two heating rollers
The front and the back air shaft with automatic hydraulic lift
Pneumatic roller
Frequency converter control
Rectification system
Big hydraulic cylinder
Designed roller
Wool roller
Reducer
Tension control magnetic motor

Technical parameter:
Model: YW-720A-Z
Max.embossing speed: 5-60m/min
Embossing width: 680mm
Material available: Paper, Plastic
Operation pressure: 2-10Mpa
Heating temperature: >200
Main motor power: 20kw
Air pressure: 0.8Mpa
Dimension(LxWxH): 4800x2600x1450mm
Net weight: 4200kg

Model: YW-920A-Z
Max.embossing speed: 5-60m/min
Embossing width: 870mm
Material available: Paper, Plastic
Operation pressure: 2-10Mpa
Heating temperature: >200
Main motor power: 32kw
Air pressure: 0.8Mpa
Dimension(LxWxH): 4800x2800x1450mm
Net weight: 5200kg

Model: YW-1150A-Z
Max.embossing speed: 5-60m/min
Embossing width: 1100mm
Material available: Paper, Plastic
Operation pressure: 2-10Mpa
Heating temperature: >200
Main motor power: 34kw
Air pressure: 0.8Mpa
Dimension(LxWxH): 4800x3000x1450mm
Net weight: 6200kg

Model: YW-1300A-Z
Max.embossing speed: 5-60m/min
Embossing width: 1250mm
Material available: Paper, Plastic
Operation pressure: 2-10Mpa
Heating temperature: >200
Main motor power: 34kw
Air pressure: 0.8Mpa
Dimension(LxWxH): 4800x3200x1450mm
Net weight: 7000kg

Configuration:
- SCHNEIDER frequency inverter equipped for infinite speed variation ensures speed adjustment much more convenient and efficient, and makes the machine run stably and quietly.
- Enlarged chromed heating roller is mounted with built-in oil heating system which provides balanced laminating temperature and owns excellent temperature persistence.
- SCHNEIDER PLC system realizes automatic paper separation, breakdown alert for self-protection etc.
- Pneumatic film unwinding system positions film roll more accurately, and makes the loading and unloading of film roll and film unwinding tension much more convenient.
- Three separating systems are available for different specifications of sheets and film: 1) Flail cutting system 2) serrated perforating wheels 3) carborundum grinding wheel to laminated film.
- Perfected tracking adjusting system makes traction adjustment more convenient and efficient.
- Anti-curvature device and vibrating paper collector ensure paper collection more regular and convenient.
- Slip structure with aisle which convenient to maintenance.
- The vibration collecting table.
- Optional device: electromagnetic heating system with surcharge.

Technical parameter:
Model: YFMB-720L
Max. paper width: 680mm
Paper thickness: 100-500gsm
Laminating speed: 0-30m/min
Gross power: 20kw
Total weight: 1700kgs
Overall dimension: 4600*1560*1500mm

Model: YFMB-920L
Max. paper width: 880mm
Paper thickness: 100-500gsm
Laminating speed: 0-30m/min
Gross power: 22kw
Total weight: 1900kgs
Overall dimension: 4600*1760*1500mm

Model: YFMB-1100L
Max. paper width: 1040mm
Paper thickness: 100-500gsm
Laminating speed: 0-30m/min
Gross power: 24kw
Total weight: 2100kgs
Overall dimension: 4600*1960*1500mm

Introduction
This model is a multi- function model, suitable for card board, a/b/c/e/f flute corrugated board, it is applied into folding and gluing of 6-corner box, 4-corner box,
Cd box, lock-bottom box, double sides box(two sides glue), straight line box(one side glue), flat mouth box.
This machine has correction device and bottom lock, pre-fold , 4&6 corners box fold device.Can make electrical adjusting .Has uv destroying device and dust removing device for better gluing effect.
Machine configuration:
1.Bearing: nsk (japan)
2.Frequency converter: schneider (germany)
3.Plc system: schneider (germany)
4.Multi-wedge belt and pulley: hutchinson (france)
5.Conveyor belt: rapplonswiss
6.Flat beltnittajapan
7.Main motor: teco (taiwan)
8.Pressing motor: cpg (taiwan)
9.Touch screen: weinvien(taiwan)
10.Plasma surface treatment system:domestic famous brand plasma system
Optional:
11.Servo motor: yaskwa (japan)for 4/6 corner box
12.Spraying adhesive(glue) system :for 4/6 corner box
13.Automatic paper receiver
Notes: other parts can be configured as your requirements


-

Characteristics:
1.Driving by synchronous belt,ensure smooth and accurate running.
2.Inverter driving,stable and power saving.
3.Use electric adjust,easy operate.
4.Automatic continuous feeding,use multiple belt with vibrating motor,(for higher configuration use drilled suction belt),to keep the feeding stable.
5.Automatic counting and kicking,quantity can preset.
6.Conveyer pressure adjustable according to the box to ensure best quality.

2. Main technical parameter:
Model ZH-A1100PC
Suitable material Card board,E flute corrugated board
Max method Automatic continuous feeding
Max mechanical speed 450m/min
Overall dimension 15500*1700*1800mm
Weight 8T
Power consumption 19KW

3.Standard & Optional configuration list
Configuration Units Standard Optional
1 Feeder section
2 Paper Alignment Section
3 Pre-fold Section
4 Crash lock bottom section
5 Upper paste barrel equipment
6 Down pasting equipment
7 Gluing system
8 Grinder device
9 Plasma treatment system
10 Folding and closing section
11 Trombone section
12 Air compressor
13 4-6 corner

Common name: difenoconazole
Chemical name: Cis-trans-3-chloro-4-[4-methyl-2,(1H-1,2,4-triazol-1-ylmethyl)1-,3-dioxolan-2-yl]phenyl 4-chlorophenyl ether
Molecular formula: C19H17C12N3O3
Molecular weight: 406.3

Physical chemistry:Form pale yellow crystals. S.g./density 1.40(20) M.p.78.6 V.p.3.3¡¨¢10-5mPa(25) Solubility In water 15mg/l(25).In ethanol 330, acetone 610, toluene 490 n-hexane3.4, n-octanol 95(all in g/l,25).Stability stable up to 150. Hydrolytically stable.

Use: Systemic fungicide with a novel broad-rang activity protecting the yield and crop qulaity by foliar application or seed treatment.Provides long-lasting preventive and curative activity aganist Ascomycetes. Basidiomycetes and Deuteromycetes. including Alternaria,Ascochyta.Cercospora, Cercosporidium, Colletotrichum. Guignardia, Mycosphaerella, Phoma,Rhizoctonia.Ramularia, Septoria,Uncinula,Venturia spp., Erysiphaceae, Uredinales and several seed-borne pathogens.Used against disease complexes in grapes.pome fruit,stone sugar beet, banana,oilseed rape cereals,rice,soya beans.ornamentals and various vegetable crops, at 30-125g/ha. Used as a seed treatmetn against a range of pathogens in wheat and barley,at 3-24g/100kg see.d

25% EC:200L/ Iron drum, 10% WDG,96%TC:25Kg/Fiber drum.

Common name: Myclobutanil
Chemicai name: 2-(4-Chiorophenyl)-2-(1h-1,2,4-triazol-1-ylmethy)hexanenitrie
Molecular formula: C15H17CIN4
Molecular weight: 288.8

Physical chemistry:Form pale yellow solid,M.p 63-68&(tech), V.p.0.213mPa(25&). Solubility In water 142mg/l(25&) Soluble in common organic solvents, e.g.ketones, ester4s,alcohols and aromatic hydrocarbons,all 50-100g/l. Insoluble in aliphatic hydrocarbons. Stability Stable under normal storage conditions Aqueous solutions decompose on exposure to light.DT50 222d(sterile water),0.8d(sensitised sterile water),25d(pond water);no hydrolysis(28&)in 28d(Ph 5,7 and 9).

Use:Control of Ascomycetes.Fungi Imperfecti,and Basidiomycetes on a wide variety of crops.For example,used as a foliar treatment for control of scab and powdery mildew in apples and pears;powdery mildew,shot-hole,blossom blight,and rust in stone fruit; powdery mildew in vines and cucurbits;powdery mildew and rusts on ornamentals;rusts on perennial grasses grown for seed;and various diseases of wheat;as a seed treatment for control of seed-and soil-borne diseases in barley,maize,cotton,rice and wheat;and as a post-harvest drench or dip.

12.5% ,25% Myclobutanil EC:200L/ Iron drum, 97% Myclobutanil TECH:25Kg/Fiber drum.

China leno bag mesh bag making machine equipment

We are tianfeng plastic machinery plant, professional maker for plastic woven bag machinery in china, some production lines we make listed below:
Pp/pe woven bag/sack production line,
Mesh (leno) bag production line,
Cement bag/sack laminated bag with mid-seam production line ,
Laminated bag (cement bag) production line
Bopp colored and laminated woven bag production line
Block bottom valve bag product line
Jumbo bag (container bag) production line
Tarpaulin / flat woven fabric sheet/ geotextile production line
Special tapes (artificial grass) production line
Plastic film shopping bag/t-shirt bag production line
Agriculture film cover production line
Sun shade mesh/net production line
Paper bag production line

We have two machinery plants, (one in hefei city, the other is in wenzhou city), and two woven bag/ leno bag factories in shangdong province, which is biggest leno bag factory in china.

Full set of plastic woven bag machinery we make: flat / round yarn making machine, circular loom, mesh loom, laminating machine, film blowing machines, printing machines, cutting, sewing, sealing machines, plastic recycling machines and other related machines and service. So we could provide both plastic bag and its production related service.

-

As per client requirement