Find Verified Fig Suppliers, Manufacturers and Wholesalers

Selective Pallet Racking, it is also called as Heavy duty Pallet racking, it is the most common type of palletized storage rackings, what it stores heavy goods and need to be used with pallets and forklifts. Heavy-duty racks have lower storage density but good picking efficiency and lower cost.

Pallets can be located, accessed and moved individually
Rapid handling of almost all types of palletised goods.
Infinitely adjustable and offeringa wide range of options and components to accommodate specialized needs.
Maximizes space use in any warehouse configuration while retaining optimum product accessibility.
Strength and rigidity prevents compression damage to goods.Bottom level of pallets can be stored on the floor, lowering structure costs.
100% picking efficiency
Easy for handling equipments
Adjustable beams for different cargos, and could be used together with other accessories
Varieties of upright and beam sizes for the most economic structure.

Our produced 110KV series product line has formed a standardized colony, with its versions developed from former 9 versions to present 1011 or 13 versions. Furthermore, new product versions with a self-cooling configuration, with an air-cooling & maintenance-free configuration, and with a no-core-suspension configuration have been released into the markets.

In featured performance, the product line is core suspension free on site, highly efficient and energy saving, high in impedance, low in loss, in noise, in temperature increase, and in local discharge, i.e., â??1 free, 2 highs, and 4 lows. This product line may satisfy market demands requiring high power supply quality, low losses and low noise, and a long interval between overhauls.

Description:
100% new high quality.
Bring you the ultimate freshness and clean feeling.
Safe, healthy and easy to use floss.

Specification:
Material: plastic + polyester yarn
Size: 7.5 cm

Specifications:
Construct a healthy, environmentally friendly nylon that is harmless to oral hygiene.
Functionally removes plague and debris that cannot be reached by normal toothbrushes and slides easily between the teeth.
Wide bow for easy access.
Clean the area where the toothbrush cannot reach.
Floss floss gives you the ultimate freshness and clean feeling.
Easy to operate, everyday use.
Helps fight bad breath and gingivitis.
Helps remove plaque areas between teeth that are not cleaned by the toothbrush.

Hot dipped galvanized coil or sheet have excellent performance processing ideal comprehensive properties of corrosion resistance formation and coating. they are mainly used in building-roof, door, windows, roller shutter dorr and suspended skeleton, automobiles-vehicle shell, chassis, door, turnk lid, oil tand, and fehder, metallurgy-steel sash blank and color coated substrate and electric equipment-refigerator base and shell, freezer and kitchen equiment.

Our company Galvanized coil specifications as follows for you reference
Thickness range:0.13-1.5mm
Width range:600-1250mm
Zinc coating range:60g-250g
surface treatment: small spangle, middle spangle and big spangle
Material stanard: ASTM, JIS

ZT.SJ101G¨welding flux©

In accordance with GB/F4A4-H08C F5A4-H10Mn2
Equivalent to AWS F7A4

DESCRIPTION:
ZT.SJ101G is a kind of special agglomerated flux that have been designed used in welding lose oil and lose gas steel tube. Alkalinity 1.8, it is grey spherical pellet,size 2.0-0.4(10-45 mesh). Under alternating current and the condition of direct current, it can be used. If welding wire joins positive electrode, the speed of welding can reach 90M-120M, Electric arc is stabilized, is easy to remove to weld dregs, join position smooth. Join metal have the higher impact tenacity in low temperature.
The flux with good fight tide performance, pellet strength, can satisfy normal transportation store, circulates to use. Among welding course the consumption of welding flux has less quantity.

APPLICATIONS:
In combination with H08C,H08MnA,H10Mn2,h08MnMoA,H08Mn2MoA wires, It is suitable for welding various pipeline steel material, such as X52¬X60¬X65,X70,also be used in multilayer welding , two-sided only road welding, welding electrodes welding, narrow gap bury arc welding voluntarily.

ZT.SJ101G¨welding flux©

In accordance with GB/F4A4-H08C F5A4-H10Mn2
Equivalent to AWS F7A4

DESCRIPTION:
ZT.SJ101G is a kind of special agglomerated flux that have been designed used in welding lose oil and lose gas steel tube. Alkalinity 1.8, it is grey spherical pellet,size 2.0-0.4(10-45 mesh). Under alternating current and the condition of direct current, it can be used. If welding wire joins positive electrode, the speed of welding can reach 90M-120M, Electric arc is stabilized, is easy to remove to weld dregs, join position smooth. Join metal have the higher impact tenacity in low temperature.
The flux with good fight tide performance, pellet strength, can satisfy normal transportation store, circulates to use. Among welding course the consumption of welding flux has less quantity.

APPLICATIONS:
In combination with H08C,H08MnA,H10Mn2,h08MnMoA,H08Mn2MoA wires, It is suitable for welding various pipeline steel material, such as X52¬X60¬X65,X70,also be used in multilayer welding , two-sided only road welding, welding electrodes welding, narrow gap bury arc welding voluntarily.

Zt.Sj101g¨welding flux©

In accordance with GB/F4A4-H08C F5A4-H10MN2
Equivalent to aws f7a4

Description:
ZT.SJ101g is a kind of special agglomerated flux that have been designed used in welding lose oil and lose gas steel tube. Alkalinity 1.8, it is grey spherical pellet, size 2.0-0.4(10-45 mesh). Under alternating current and the condition of direct current, it can be used. If welding wire joins positive electrode, the speed of welding can reach 90m-120m, electric arc is stabilized, is easy to remove to weld dregs, join position smooth. Join metal have the higher impact tenacity in low temperature.
The flux with good fight tide performance, pellet strength, can satisfy normal transportation store, circulates to use. Among welding course the consumption of welding flux has less quantity.

Applications:
In combination with H08C, H08MNA, H10MN2, H08MNMOA, H08MN2MOA wires, it is suitable for welding various pipeline steel material, such as x52x60x65, x70, also be used in multilayer welding , two-sided only road welding, welding electrodes welding, narrow gap bury arc welding voluntarily.

ZT.SJ101G¨welding flux©

In accordance with GB/F4A4-H08C F5A4-H10Mn2
Equivalent to AWS F7A4

DESCRIPTION:
ZT.SJ101G is a kind of special agglomerated flux that have been designed used in welding lose oil and lose gas steel tube. Alkalinity 1.8, it is grey spherical pellet,size 2.0-0.4(10-45 mesh). Under alternating current and the condition of direct current, it can be used. If welding wire joins positive electrode, the speed of welding can reach 90M-120M, Electric arc is stabilized, is easy to remove to weld dregs, join position smooth. Join metal have the higher impact tenacity in low temperature.
The flux with good fight tide performance, pellet strength, can satisfy normal transportation store, circulates to use. Among welding course the consumption of welding flux has less quantity.

APPLICATIONS:
In combination with H08C,H08MnA,H10Mn2,h08MnMoA,H08Mn2MoA wires, It is suitable for welding various pipeline steel material, such as X52¬X60¬X65,X70,also be used in multilayer welding , two-sided only road welding, welding electrodes welding, narrow gap bury arc welding voluntarily.

DOT, GCC, CEC, CCC certificated professional heavy truck radial tire , with good brand, is also called as truck tyre, TBR tire, or tbr tyre. A very popular truck & coach tires in the systems for line-haul. The tires / tyres in guanchao manufacturing co., ltd with global speed, global running trademarks will have many styles for different request, such as for truck , coach, bus, light duty cargo, heavy load trucks, or passenger cars, normal cars, engineering transportation equipments.

Some features of our tires:

1.The factory & products has got ece, dot, iso9001:2008, CCC, GCC, SONCAP, INMETRO certificates
2. Our pefect service in fast delivery, creditable delivery.
3. Heavy duty bearing, long use period with strong configs
4. Patterns are selected for different use, such as steer style, drive style.
5. The raw rubber materials of grade iii are sourced from ASEAN area, which is the best material.
6. Products in full ranges of sizes and patterns.


1.Trcuk tires: packed with films or cartons, or other request
2.Truck tire: packing around 280pcs per 1x40ft hq.

Crucible and refractory bricks, used for polishing agents, adhesives, paint and paper packing refractory enamel porcelain used in the manufacture of synthetic rubber accelerator, and so on, also used in medical fight acid agent and the laxative.


According to tons to calculate, a bag of 25 kg, at least to buy a pack of.

We are a leading manufacture of float glass in china, our thickness is 2mm to 19mm, and our usual size is: 2134*3300mm, 2134*3050mm, 2440*1830mm, etc. Also we have low iron glass, patterned glass, acid etched glass (frosted glass, matte glass), safety glass, laminated glass, reflective glass, tined glass (color is bronze, grey, green, pink, golden, etc. )
We also can cut the glass and do the beveled edges as your requirements
If you are interested in our products, welcome you mail back to me.





Wooden crates

Email:sales@hqpipeline.Com
Hole cutting machine/hole cutting tool is the machine applicable for tapping/cutting/drilling of various seamless steel tubing, galvanized pipes, plastic-lining pipes etc, to facilitate the mounting of pipes(espcieally with the mechanical tee, mechanical cross, u-bolted mechanical tee). Best for tapping operation on pipes in mechanical and fire-fighting sectors.
Model no.: twk-iiia
Price:usd: 1200 / sets
Min. Order: 1 set
Capacity: 5/8" ~ 41/2" (16~114) pipes
Powder: three-phase motor, voltage: 110-415v, powder capacity: 550w, frequency: 50-60hz
Single-phase motor, voltage: 110-240v, powder capacity: 550-800w, frequency: 50-60hz
Certificate: iso9001:2000, ce
Packing: wooden cased

1. Emergency to supply the firefighting water
2. Emergency water for disaster
3. Flexible for transport

Transport tank carries and stores water for use at emergency water supply, fire scenes and incident sites. Reinforced fabric material stands up to heavy use.

Features:
1. Light weight
2. Easy operation
3. Low manpower requirement
4. Low time expenditure.


Carton box.

1.Emergency water supply in fire site
2.Self support when loading water to tank
3.Can be folded after use

Features:
Constructed of heavy dutyurethane fabric or fabric with PVC coating.

Benefits:
1. Self support no frame or parts to assemble
2. Quick setup and dismantle times
3. Unique flotation collar on inflation required
4. Low maintenance easy to clean and repair
5. Heavy duty construction for durability.



carton box

Sensor diagnosis function
Error message alarm function
Symptom inspection function
Preliminary inspection function
User friendly configuration function
Speedy work stage selection function
Customers vehicle data management function
Standard rf wireless features provides extended range, high-speed communications
Latest vehicle spec db& advanced date management system.

Heat-treated and internally hardened for high durability; available in various materials to meet a wide range of applications; standard one-and/or-two-piece configuration, with designs available for pressure of 5000psi(35.1Mpa), 7500psi(52.7Mpa), and 10000psi(70.3Mpa); discharge connections available on each side; suction connections on each side or front center.

Module studed Module
Material is 35CrMoA or 40CrMoNn alloy forged steel. To get better fiber texture, we use electric stove for second forging, or deoridation treatment. It is forged from three directions and the forging ratio is not less than 4.0:1.0. It can not have crack, impurity, looseness, overburns, etc. And weld is not allowed. It should be confirming to the stipulation of JB/TQ252-81, and should be checked by grade After quenching the rough module will be rough processed, then the hull hardness is HB285-330.

Mechanical property: b 850MPa, s670MPa, 5%,30%.
The two1:6(1:12) taper hole rolling treatments are checked by ring gage. Its contact area has continuous distribution on the circumference. The contact area is not less than 75% .The line of intersection of all cylindrical surface of the hull are facetted obtuse angle by hand or grinding wheel ,forming a circumference R8.Test pressure is 49Mpa, keep pressure 1 hour, pressure can not be reduced. Finished products have crack detection report.

200-400mm double wall corrugated pipe perforating machine
The machine configuration is reasonable, high degree of automation, can be achieved online or offline manual automatic punching punch.
Equipment configuration:
1) perforating range: OD200mm~OD400mm;
2) perforating number: Max 8;
3) perforating size adjustable;
4) electronic control system: SIEMENS PLC control, man-machine interface using SIEMENS touch screen.Key electrical components of the production line using SIEMENS, ABB and other international well-known brands of products.
Equipment highlights:

1) can be online automatic perforating;
2) the number of holes can be randomly selected from the 2 to the 8;
3) the use of fully enclosed design, safe and reliable;
4) the hole is cut into strips, and no dust pollution is easy to clean and recovery;
5) PE, PVC two kinds of materials.

Human Sculptures for Home Decoration
Human Sculptures Provider
Home Decoration Crafts
Dimension(cm): 12.5x7.5x11
Material:Copper/Iron
Description:Cast iron/copper figurine in antique bronze color-embracing couple for home decoration.

done

CPVC Compound/Resin
Qingdao PMST Chemical co.,Ltd founded in 2006, is a professional manufacturer and supplier of chemicals. Our leading products is PVC Lubricants, PVC stabilizer,PVC processing aid,CPVC Compound/Resin, CPE etc.The advantages of using raw materials and also supply the pvc foam sheet/board, color pvc foam sheet/board, pvc celuka sheet, wpc sheet, pvc marble sheet/board,PVC Profile,cpvc pipe,cpvc fitting.welcome new and old friends contact us.
Application

Hot and cold water pipe and fitting; Chemical pipes and fitting with high temperature corrosion resistance; Casing pipe and fitting for underground high-voltage power cable; Fire pipe and fitting with strict firefighting requirements; Gathering and transportation pipe and fitting for Crude oi

Items
EC-110
EC-103
Unit
Standard
Color
Lvory/Gray
Lvory/Gray
-
-
Specific Gravity
1450-1650
1450-1650
kg/m³
GB/T1033.1-2008
(eqvISO/DIS11831984)
Vicat soften temperature
�110°C
�103°C
°C
GB/T8802-2001
(eqvIOS2507;1995)
Tensile strength
â?¥50
â?¥50
Mpa
GB/T1040.2-2006
(ASTM D 638)
Tensile modulus of elasticity
â?¥2800
â?¥2400
Mpa
GB/T 9341-2008
(ASTM D 638)
Izod Charpy impact strength
8.5
8.5
KJ/
GB/T 1843-2008
(ASTM D 256)
oxygen index
â?¥50
â?¥50
-
GB/T 2406.1-2008

Package and Storage
Packed in net 25kg poly woven bags.Keep it in airtight containers and dry.cool and dark place.Damp-proof,far from fire and no contact with corrosive matter

Air Caster Rigging Systems can be configured to move a wide variety of loads that are heavy or delicate. Load movement is smooth and omni-directional,environment.
Air trailer which Finer lifting tools produced is easily to transport
and can be set up to fully functioning less than 10 minutes.
Air rigging systems capacity from 10 tons to 48 tons, more or less capacity can be customized as demand.
If you want more information regarding Air bearings pictures, price list, please kindly contact us, professional service hope will get your satisfaction.
Shan Dong Finer Lifting Tools co., LTD specializing in manufacturing and marketing of Air Casters, we focus on producing Air Bearing Casters for 20+ years.
Regarding air casters package details,air casters factory in China, air casters pictures and price list, please kindly feel free contact us. professionally service hope will get your satisfaction.

This bearing can be used to the machine tool and other high precision machinery of the rotary table or sub-set, and also can be used for chuck, measuring instruments and test equipment and rotary table configuration. This bearing requires higher quality of the parts to match it. You must control screw tightening torque when install it.



Set

Specification:
Item: 626zz
Closures: 2 metal seals
Weight: : 0.0008 kg
Dynamic load rating cr: 2.01 kn
Static load rating cor: 1.05kn
Quality: electric motor quality
Dimensions: 6*19*6mm
Inner diameter: 6mm
Outer diameter: 19mm
Width: 6mm

Description:
Packing:1.Polybag +box+carton 2.The users who have any requirement in packing may write them in the contract ( customized )
Service: oem brand , small order , high quality , prompt delivery
Material: chrome steel, carbon steel
Deliverydate: it depands on your quantity, basically 15-25days
Payment terms: t/t 30% in advance, the balance againest the copy of b/l or l/c at sight
Application: fan, car, truck, tractors and automatic machine, textile machine, pump, agricultural machinery, machine tool, window , sliding door , other furniture and some toys
Miniature deep groove ball bearings
1. Feature :having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls company introduction
2. As flexible as the performance is, the configurations of single row ball bearings is also as versatile.
3. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease.

Deep groove ball bearing 6000 6200 6300 series available
6000 series - miniature bearings
6200 series - light series ball bearings


Dimensions: 6*19*6mm
Packing:1.Polybag +box+carton 2.The users who have any requirement in packing may write them in the contract ( customized )

basic parameters
rated power(w) 3000 survivel wind speed(m/s) 45
max power(w) 3500 wind wheel diameterm(m) 5.8
rated voltage(v) 220/560 blade length(m) 2.71
rated revolution(r/m) 240 swept area(m2) 26.4
cut-in speed(m/s) 1 blade material FRP
cut-off wind speed(m/s) 25 generator life 20
sone key technology




control method adjust speed method centrifuge variable pitch
brake method electromagnetic
generator generator configuration 3-phase 380/220v 50/60hz
generator  type 3-phase permanent magnet
protect class

Basic Parameters
Rated Power(kw) 60 Survival Wind Speed(m/s) 45
Max Power(kw) 65 Working Wind Speed(m/s) 1-25
Rated Voltage(v) 420/600 Rated Wind Speed(m/s) 10
Rated Rotation(r/min) 100 Blade Length(m) 8.6
Cut-in Wind Speed(m/s) 1 Blade Material FRP
Cut-out Wind Speed(m/s) 25 Generator Life(year) 20
                          Some Key Technology
Control Method Adjust Speed Method centrifuge variable pitch
Brake Method electromagnetic
Generator  Generator Configuration 3-phase 380/220v 50/60hz
Generation Type 3-phase permanent magnet
Protect Class IP54

basic parameters
rated power(kw) 20 survivel wind speed(m/s) 45
max power(kw) 22 wind wheel diameterm(m) 10.22
rated voltage(v) 384/560 blade length(m) 4.82
rated revolution(r/m) 160 swept area(m2) 88.53
cut-in speed(m/s) 1 blade material FRP
cut-off wind speed(m/s) 25 generator life 20
sone key technology




control method adjust speed method pneumatic pitch 
brake method mechanical
generator generator configuration 3-phase 380/220v 50/60hz
generator  type 3-phase permanent magnet  AC
protect class IP54
blade technology resin is imported from american ashland,acuum slip casting, no bubble ,high strongth

Basic Parameters
Rated Power(kw) 50 Survival Wind Speed(m/s) 45
Working Voltage(v) 380/220 Working Wind Speed(m/s) 1-25
Rated Voltage(v) 420/600 Rated Wind Speed(m/s) 10
Rated Rotation(r/min) 120 Blade Length(m) 8.4
Cut-in Wind Speed(m/s) 1 Blade Material FRP
Cit-out Wind Speed(m/s) 25 Generator Life(year) 20
                        Some Key Technology
Control Method Adjust Speed Method centrifuge variable pitch
Brake Method electromagnetic
Generator Genrator Configuration 3-phase 380/220v 50/60hz
Generator Type 3-phase permanent magnet
Protect Class IP54

basic parameters
rated power(kw) 10 survivel wind speed(m/s)
45
max power(kw) 11 wind wheel diameterm(m) 7.6
rated voltage(v) 384/560 blade length(m) 3.8
rated revolution(r/m) 200 swept area(m2) 45.34
cut-in speed(m/s)
1 blade material FRP
cut-off wind speed(m/s)
25 generator life 20
sone key technology
control method adjust speed method centrifuge variable pitch
brake method electromagnetic
generator generator configuration 3-phase 380/220v 50/60hz
generator  type 3-phase permanent magnet
protect class

Product Description:
Ship launching or upgrading depending on Air Bag is an innovative technology having utmost bright prospect in shipbuilding. Now the Flexible Launching Technology is full of mobility, with advantages such as saving effort, saving time, saving work load, saving investment, flexible, safe, reliable, and outstanding benefit, etc. The technology of apply air gasbag to the launching and landing of ships overcomes the restrictions of traditional slide board technology which is commonly used in building small or medium size ships.

After years of practice and accumulation of experience, we have developed this technology from facilitating the launching of only 1, 000 DWT ships to current 55, 000 DWT ships. And now this technology has become into a flexible, promising, secure and mature technology. Besides that, these airbags are widely used in upgrading of ships and boats of all sizes.

Construction Features:
Launching / Landing Airbags, basic body consists of which consist of our rubber layers, synthetic-cord-reinforced rubber layers, are kind of a cylindrical airbags with hemispherical heads at the both ends. All of these are vulcanized together, and then compress air inside to enable in to roll.

1. Outer Rubber
The outer rubber layer that covers the outside of launching airbags protects the cord layers from abrasion and other external forces. This compound has sufficient tensile and tear strength to withstand any weather condition and hard usage. Standard color is black.

2. Synthetic-tyre-cord layer for reinforcement
The reinforcement cord layers, which are made of Synthetic-tire-cord commonly used in tires, are arranged at ideal angles to hold the internal pressure and to distribute the stress evenly providing strong efficient reinforcement.

3. End Fittings
End fittings include air tightness swivel and airbags safety air inlet.

Main Application Field of Air-bags:
Shipbuilding Industry:
Upgrading and launching of ships; Shipwreck salvaging; Ships collision avoidance

Hoisting and Moving Industry:
Lifting and transporting of heavy weight objects.
Building Industry:
Pneumatic core moulding use in building industry.
Logistics and Warehousing Industry:
Gas and Liquid of airbags containers.
Airline Industry:
Airplane overhaul airbags, fuel tanker and emergency slide way.
Marine Industry:
Deep sea breeding net cage, offing fence.
Emer, gency rescue and disaster relief industry:
Fight floods and stop leakage, moving the ruins.
Military Affairs industry:
Self-saving for field operation vehicles, floating bridge, aquatic pipeline, dropping off oil tanker, naval ships protection.
Public Security:
Airbags shelter partition for blasting.


D1.8m*10m.

Nobler Copper Free mirror(also called copper and lead free mirror, or eco-friendly mirror), are made with a copper-free solution as well as lead-free solution, it is new generation of mirror. Mirror grade glass is thoroughly cleaned by the scouring scrub with brush unit and detergent. Then the glass surface is sensitized with a diluted solution of tin chloride. This surface treatment bring the deposition of copper free. Copper free nitrate is sprayed on the sensitized glass surface, together with other chemical configurations, then forming a final uniform copper-free layer to avoid silver oxidation. And the protective backside coating could protect the mental layer from scratches and corrosion.

We specialized in powder coating equipment over a decade year, with good quality and competitive price. We are national high-tech enterprise and got 13 technical patents in this field.

Our products have been exported to dozens of countries and regions, such as usa, uk, japan, france, russia, balares, australia, denmark, canada, mexico, saudi, arabia, jordan, armenia, malaysia, singapore, kuwait, morocco, uae, isreal, new zealand, macedonia, etc.

Characteristic of powder coating booth:
1, the area of spray booth will be confirmed according to actual working condition.
2, we will continue to improve our products, please consult us to confirm actual size and configuration.
3, single-station coating booth with 1 recovery system, 2 stations coating booth with 2 stagger recovery system.

Our silver mirrors are made from high quality float glass. After the glass is cleaned and rinsed, the surface of the glass is sensitized with a diluted solution of tin chloride. This surface treatment allows for the deposition of silver. Silver nitrate is sprayed onto the sensitized surface of the glass along with other chemical configurations. The final outcome is the formation of a uniform silver layer on the glass.
Once the silver layer is formed on the glass, a layer of copper is then deposited directly onto the silver. Our recent technological advances have lead to the development of copper free protective films, which also prevent silver oxidation nce the metal layers are attached to the glass, they are covered by a protective mirror backing paint. The mirror backing paint protects the metal layers from corrosion and from mechanical scratching.
Our silver mirror uses Italian Fenzi paint with the features of exact image, high reflectivity and long time waterproof.


seaworthy wooden crates+paper interleave

The machine is applicable for plasticating and mixing rubber and plastics.

Structural features:

The internal mixers of this adopt elliptical tangential rotors. The wings and working surfaces of the rotors, the internal surfaces of the mixing chamber, and the working surfaces of the pressing ram device and the discharging device are all coated on with wearable hard alloy by built-up welding method, which are durable and corrosion proof and have a long service life.

The rotors, the mixing chamber and the discharging door are all structured with circulating channels to realize the circulation of heat transmission mediums. According to different processing requirements, the mixing materials may be heated by hot steam or cooled by cold water.

The mixing chamber is a combined configuration, which is convenient for assembling, disassembling and maintaining. The drop-door discharge device is driven by two reciprocating oil cylinder which directly pull the locking plate to lock the discharge door. The device provides fast discharging and reliable airproof.

The rotors are supported by rolling bearings, which are easy to maitain and have a long service life.
The transmission system adopts a hard facing gear reducer, which has a compacted structure with higher transmission effciency, lower noise and longer service life.

The pressing ram device may be driven by pneumatic cylinder or oil cylinder to press onto the mixing materials to force them equally mixed so as to increase productive effciency. Mated with the electric controller, the pressing ram device can automatically add pressure, release pressure or just keep floating.

Both manual and automatic modes are arranged to operate plc electric system. It is easy to exchange the modes and reliable to operate the controller.

Green filter’s pipeline strainers are used by industrial and commercial customers to protect their process piping equipment by removing debris from the liquid that flows through pipelines. Products include automatic self-cleaning strainers as well as manual, duplex, simplex, and y strainers. Both cast and fabricated type strainers are made in standard configurations to meet the needs of most applications. For unique, complex, or specialized applications, a pipeline strainer can be designed and manufactured to meet the exact requirements of the application with no compromises. Green filter offers pipeline strainers in sizes from a tiny 1/4” up to a huge 48” pipeline size

Wooden and standard

Exort:lass, reflective glass, sheet glass, figured glass and mirror

Wooden packing

Extruder: HDPE/MDPE pipe extrusion line adopts high speed and efficiency of single screw extruder.The screw has barrier unit, special material mixing components and new style of barrel grooves. The extruder is equipped with low noise fan, ceramic heating ring, high speed hard gear reducer; full-automatic vacuum loader. This configuration assures good plasticization and mixing effect. It also assures high speed, stable production and great output.
Pipe Marking Line: It is extruded by single screw extruder SJ30/25 through the composited extrusion die.
Die Head: The material of the die head is high quality 40Cr. It is the most advanced spiral or lattice die head in the world, which assures stable extrusion in the production process. In order to fit the performance of PE material and assure the stability of pipe diameter and roundness when producing thick-wall pipe with high speed, we adopt water film lubricating and water (or oil) circulation cooling.
Vacuum Calibrating Water Tank: The body is made of high hardness and good quality stainless steel board. It has advanced water circulation and high pressure cooling system, vacuum adjusting equipment and accurate water temperature and water level automatic controlling system. The accurate bronze calibrating sleeve ensures cooling speed and molding pipe. It can be three-dimension adjusted up & down and left & right.
Water Spray Cooling Tank: The body is made of stainless steel and the ductcoat is transparent soft PVC curtain. Stainless steel float adjusts water level and electricity controls water temperature. The nozzle material is ABS engineering plastic. The frame of the machine can be adjustable up and down. There is roller in the tank.
Haul-off Machine: We can offer two tracks, three tracks, four tracks, five tracks and six tracks Haul-off machine according to different diameter and wall thickness of the pipe. It adopts frequency conversion. Every traction frame transfers with chain which ensures every track moving simultaneously. It is pneumatic and mechanical combination clamping. The bearing has special structure which can effectively reduce the installation error.
Cutting Machine: It is automatic dustless cutting machine. Smooth cutting section, synchronous frequency conversion drive, high accuracy and low noise. Large diameter pipe uses full-automatic planetary cutting machine. It is synchronization with the whole production line. The flexibility adjustment for the blade place and cutting depth assures cutting machine reliability.
Control System: We can offer SIEMENS PLC controlling system which is intelligent controlling system. Also we can offer ordinary controlling system which use SIEMENS electrical parts, Omron temperature controller. Intelligent control makes the operation simpler.

Figure A.1 - Wire rope grip

Figure A.2 - Bridge

Figure A.3 - U-bolt

Note: All edges are to be rounded

Figure A.4 - Collar nut

EN13411-5:2003+A1:2008(E)

Table A.1 - Dimensions(see Figures A1, A2, A3 and A4)

Figure A.1 - Wire rope grip

Figure A.2 - Bridge

Figure A.3 - U-bolt

Note: All edges are to be rounded

Figure A.4 - Collar nut



EN13411-5:2003+A1:2008(E)

Wholesale Tree Grates
New City Creative produces a variety of practical tree grates to beautify your landscaping and streetscapes. We offer tree grates in various sizes and shapes. Protect your trees and add a touch of elegance and sophistication to your landscape and streetscape. Consider customizing your grille with your city, neighborhood, or company's logo. Whether it's a city center street, a quaint suburb, a new stadium or an amusement park, New City Creative is sure to manufacture a range of tree grates or guardrails to suit your needs and specifications.



Tree Grate Market Leader
You'll enjoy a variety of options that are sure to satisfy your specifier's needs.

In addition to creating an attractive environment, you can create differentiation with our unique designs.

Enjoy product flexibility and usability to complete projects on time.

Light openings allow designated personnel to enter the tree pit for ground lighting, outlets, or irrigation. Additionally, customers can take advantage of this feature to more easily customize Street View during special events.

The two-piece configuration allows the tree grate to be supported from three sides when installed without the need for additional hardware. We recommend using a two-piece tree grating for optimal stability and longevity.

We offer decorative trench products to match select tree grate designs.



New City Creative's tree grate products fully comply with ASTM A48, ADAAG and municipal standards. Protect trees throughout their life cycle with many expandable tree opening grill designs. We offer the widest range of products on the market, ensuring that specifiers' needs are met. We will also customize products when you have unique requirements for your project.

Features:

1)Easy to use and will not drop

2)Could relieve labor pain in the lower back

3)The size can be adjusted

4)Easy to fix and separate, easy to store

5)Could quickly consume body fat, eliminate fatigue, and achieve an ideal figure




Product nam Hula Hoops

Brand Jeule

Material Plastic

Size 32*9.3*45cm

Color Pink/blue/gray

Logo Customized

Packing Carton

MOQ 5pcs

Portï¼?China main port

Shipment Sea/ air / express

Payment term T/T,Paypal, Western Union or trade assurance

Double-station automatic bead wrapping machine

This equipment is used for wrapping TBR tire beads in the form of spiral wrapping. It can realize the functions of automatic splicing, automatic fabric strip wrapping, and automatic cutting. Manual operation is required to take and put the bead bundle and replace the fabric roll, Or another configuration manipulator or kuka robot to achieve automatically take and place the bead bundles.

Product NameFull Automatic Stick for Pasta Machine Noodle Packaging Machinery with Three Weighers
Item No MYD000015F

Contains 
1Packaging machine    1 set
2Box conveyor line       1 set
3Hoist                           3 sets
4Weighing machine      3 sets          

Application
Automatically finish the process of weighing outputting filling and sealed packing of the Spaghettilong pasta and other noodle

Technical specification 
1 Package length 200240mm
2 Package range 5001000gbag
3 Packing speed With three weighers3055bagsmin
With four weighers5065bagsmin
4 Machine power Host delivery 38N04KW Weighing liftN Weigh lift quantity
5 Air consumption 006mmin
6 Voltage AC220V50HZ

Main components electrical configuration table
 No Name Model Brand
1 PLC System X40DTD Omron Japan
2 Touch screen TK6070IP Vinyl Taiwan
3 Photoelectric Sensors 06T204 ifm Germany
4 proximity switch 1FS246 ifm Germany
5 solid state relay DD4825DA4840 Mega Shanghai
6 switching power supply NES5024V Mingwei Taiwan
7 server system EMJ08 servo motor PROWETE08A Eston
8 main motor 6IK90RGVCF CUHK or Miles

Product NameFull Automatic Stick for Pasta Machine Noodle Packaging Machinery with Three Weighers
Item No MYD000015F

Contains 
1Packaging machine    1 set
2Box conveyor line       1 set
3Hoist                           3 sets
4Weighing machine      3 sets          

Application
Automatically finish the process of weighing outputting filling and sealed packing of the Spaghettilong pasta and other noodle

Technical specification 
1 Package length 200240mm
2 Package range 5001000gbag
3 Packing speed With three weighers3055bagsmin
With four weighers5065bagsmin
4 Machine power Host delivery 38N04KW Weighing liftN Weigh lift quantity
5 Air consumption 006mmin
6 Voltage AC220V50HZ

Main components electrical configuration table
 No Name Model Brand
1 PLC System X40DTD Omron Japan
2 Touch screen TK6070IP Vinyl Taiwan
3 Photoelectric Sensors 06T204 ifm Germany
4 proximity switch 1FS246 ifm Germany
5 solid state relay DD4825DA4840 Mega Shanghai
6 switching power supply NES5024V Mingwei Taiwan
7 server system EMJ08 servo motor PROWETE08A Eston
8 main motor 6IK90RGVCF CUHK or Miles

Product principle

The working principle of the plate evaporator is to compress the secondary steam generated by the equipment through the configured compressor, then raise the pressure and temperature to a certain range, and finally transfer it to the relevant heating chamber of evaporator as heating steam. Finally, to perform the condensation heat release program, so that it can help the latent heat of the steam and the recycling can be effectively obtained.





Maximum heat transfer area: 500m2/set; Maximum design pressure:16bar

Maximum temperature:200 celsius degree; Nozzle diameter:DN50~DN500

Plate thickness:0.4mm;Gasket material:NBR, EPDM, HNBR, HT-NBR, HEPDM, CR, VITON/FKM

Fixed and movable plate material: Carbon Steel, Stainless Steel, and others on request.

Plate material:AISI304, AISI316, AISI316L, Titanium, Ti-Pa,Hastelloy C276,254SMO,Nickel, AISI904L.

Advantages

Plate evaporator

High heat transfer efficiency

The plate evaporator is ingenious in design, so the heat transfer efficiency is higher than that of the general evaporator. Generally, the plate evaporator area only needs about one-half of the tube evaporator then can achieve the same evaporation effect.

Plate evaporator

Compact overall structure

The whole structure is compact, floor space is small, and there is no need to invest too much manpower and material resources in the later use process. For some maintenance work, it only needs to be carried out in the original space range, and it's very simple whether it is disassembled or installed .

Plate evaporator

Diversification of components

The heat exchange area can be effectively adjusted according to the customer's needs: now the heat exchange area of different evaporators has different ranges, since the heat exchanger plates can be disassembled, so multiple components with multiple skills and more new functions can be provided through adjusting number of plates and changing relative flow path.

Plate evaporator

Small heat loss

Because this type of equipment is compact in structure and relatively light in weight, compared with tubular evaporators, it also reduces heat loss, and such equipment usually does not need to be insulated.

Plate evaporator

Less pressure loss

Under the same heat transfer coefficient condition, such evaporator equipment can control the pressure loss within a certain range by rotating a reasonable flow rate.Compared with tubular evaporator,it can reduce 2/3 pressure loss.

Plate evaporator

Stable and safe operation

Different sealing procedures are designed on the sealing device between the plates, and
Range of application

Metallurgy, food industry, paper industry, air conditioning, chemical and desalination industries

Planetary winch gearboxes of the HFW series are composed of 16 finely spaced frame sizes. The compact design allows the gearbox to be integrated into the winch drum. The failsafe brake can be integrated inside the gearbox or mounted externally, with common lubrication for the gears. Electrically driven versions are available with both in-line and right-angle configurations. Torque ratings are organized by FEM class, in accordance with minimum approved class safety factors for gears.



Key features



Class approval program

ATEX conformity on demand

Torque ratings are organized by FEM class

The failsafe brake can be integrated inside the gearbox or mounted externally, with common lubrication for the gears



Specifications

Torque range

3.000 ... 275.000 Nm

This Ainuo AN9640B(F)/AN9651B(F)/AN9651F(F) series comprehensive electrical safety compliance analyzer is a typical safety analyzer in the industry, and has been sold well at home and abroad for nearly 30 years. This product keeps pace with the times in terms of functions and performance, and is continuously improved to meet the requirements of change of electrical product safety standards and changes of safety compliance testing requirements of production lines.

This series of products can meet the safety standard testing requirements of various electrical products such as household appliances, energy-saving lamps, information equipment, audio and video equipment and laboratory equipment.

Features:

Regulations: comply with safety standards in various industries and meet the testing requirements of new standards.

Multi-function: integrating comprehensive testing of safety performance and electrical performance such as AC withstand voltage, insulation resistance, grounding resistance, leakage current, power parameters, starting performance, etc., one station, one-key start, and complete full-function testing quickly.

Perfect configuration: 500VA AC withstand voltage (AC 5kV/100mA), 200mA or higher short-circuit current, optional thermal withstand voltage, up to 32A grounding resistance test current, and 12V or lower open circuit voltage; leakage current testing under operating/non-operating temperature, standard GB/T12113 Figure 4 Human Body Simulation Network (MD).

This AN9651TH(F) series comprehensive electrical safety compliance analyzer has eight-in-one testing (grounding resistance/insulation resistance/AC withstand voltage/DC withstand voltage/leakage current/power parameters/start-up/waiting), compatible three/single-phase loads, suitable for safety testing of line, labs, quality inspection department of electrical appliances such as central air conditioning, commercial heaters, commercial kitchen utensils and others.

Features:

Multi industrial standards: comply with CCC, IEC, EN, VDE, BS, UL, JIS and other mandatory electrical safety standards. 200mA or higher short-circuit output current for 500VA withstand voltage (ACCV/100mA). Built-in replaceable MD card for leakage contact current test network, suitable for various industrial standards for different MD.

Complete functions: AC withstand voltage, DC withstand voltage, insulation resistance, grounding resistance, leakage current, operating power, low-voltage start and waiting.

Multi power supply: built-in isolated power unit, automatically control of power supply of the product under test; external variable frequency power supply for testing online. Optional three-phase isolation transformers or variable frequency power supply and U.S. standard power supply of various specifications (20kVA%kVA0kVA90kVA).

Intelligent test: 15 groups of memory of test conditions, 8-step programming for each group; one-key start to complete all tests.

Automatic control: interfaces for RS232/RS485/LAN (optional), barcode scanner, variable frequency power supply control, digital control, easy to configure automatic test systems.

Information management: optional PC and ESRS software for barcode recognition, data management, MES connection.

Simple operation: 10. TFT color screen, menu operation, Chinese/English dispaly, socket-type test tooling.

Applications:

Used as food additive in food stuff industry.

Used as foaming agent in rubber industry.

Used as acidifying agent in medicine industry

Used as reactor in fire fighting.Etc.


Packing details : 25kg plastic woven bag.

Delivery details : w it hi n 10 days after get deposit .

1. 24hours afte r-s a les lar following up.

Applications: Used as food additive in food stuff industry. Used as foaming agent in rubber industry. Used as acidifying agent in medicine industry Used as reactor in fire fighting.Etc. Packing details : 25kg plastic woven bag. Delivery details : w it hi n 10 days after get deposit . 1. 24hours afte r-s a les lar following up.

Main Features of Mode E rickshaw


1. Battery power. Good for environment protection.
2. Without engine & fuel tank & cooling system etc, simple conposition.
3. Low noise design.
4. Economic & Practical model.
Suitable for: Express service; Retails; passenger 4-6; Farming transportation, etc.
5. Good quality high performance with reasonable price.
6. Changable configuration offered to meet your rearl demands.

Stay ahead of the curve with our newest in-stock lashing buckles, designed to offer cutting-edge load securement solutions. Engineered with advanced materials and innovative technology, our latest buckles provide unparalleled strength, durability, and ease of use. Available in a range of sizes and configurations, our lashing buckles are perfect for securing various types of loads.