Heat-treated and internally hardened for high durability; available in various materials to meet a wide range of applications; standard one-and/or-two-piece configuration, with designs available for pressure of 5000psi(35.1Mpa), 7500psi(52.7Mpa), and 10000psi(70.3Mpa); discharge connections available on each side; suction connections on each side or front center.
Module studed Module
Material is 35CrMoA or 40CrMoNn alloy forged steel. To get better fiber texture, we use electric stove for second forging, or deoridation treatment. It is forged from three directions and the forging ratio is not less than 4.0:1.0. It can not have crack, impurity, looseness, overburns, etc. And weld is not allowed. It should be confirming to the stipulation of JB/TQ252-81, and should be checked by grade After quenching the rough module will be rough processed, then the hull hardness is HB285-330.
Mechanical property: b 850MPa, s670MPa, 5%,30%.
The two1:6(1:12) taper hole rolling treatments are checked by ring gage. Its contact area has continuous distribution on the circumference. The contact area is not less than 75% .The line of intersection of all cylindrical surface of the hull are facetted obtuse angle by hand or grinding wheel ,forming a circumference R8.Test pressure is 49Mpa, keep pressure 1 hour, pressure can not be reduced. Finished products have crack detection report.
Our plants are specialized in producing wide range of replacement parts for triplex mud pump(such as fluid end module, liner, piston, valve&seats, and a full line of module parts) for brand name mud pumps, including emsco, national, ideco, gardner denver, oillwell, opi wheatly, wilson, wirth, ellis willianms, skytop, brewster etc. All items are manufactured to api 7k quality standards.
Module descriptions:
Heat-treated and internally hardened for high durability; available in various materials to meet a wide range of applications; standard one or two-piece configuration, with designs available for pressure of 5000psi(35.1mpa), 7500psi(52.7mpa), and 10000psi(70.3mpa); discharge connections available on each side; suction connections on each side or front center.
Material is 35crmoa or 40crmonn alloy forged steel. To get better fiber texture, we use electric stove for second forging, or deoxidation treatment. It is forged from three directions and the forging ratio is not less than 4.0:1.0. It can not have crack, impurity, looseness, overburns, etc. And weld is not allowed. It should be confirming to the stipulation of jb/tq252-81, and should be checked by grade3 after quenching the rough module will be rough processed, then the hull hardness is hb285-330.
BOLU manufactures fluid end module and accessories.
All our module products are exchangeable with OEM products and meet or exceed API-7K standards.
Fluid End module and Accessories
Made of high grade premium materials
Exchangeable with OEM products
Meet or exceed API-7K standards
For more details, please feel free to tell us.
Established in 1998, Botou Bolu Petroleum Machinery Factory is a professional manufacturer & supplier of mud pumps & parts.
Bolu Petroleum can offer a full line of mud pumps & parts together with casing heads, drilling pipe join tools, TDB hydraulic profile control water plugging pump & parts , X-trees and many other oilfield drilling tools.
Bolu Petroleum has been granted the API certification. Products are exported to America ,Middle East, etc.
Bolu Petroleum is looking forward to being partners with you around the world.
Mud Pump Fluid End Module is an important component of the hydraulic pump end of the mud pump.
Mud Pump Fluid End Module is forged by high-quality alloy steel 35CrMo or 40CrMnMo. It has no defects such as interlayer, crack, impurity, looseness and over-burning. Welding is not allowed. The Mud Pump Fluid End Module is in full compliance with API7K standard and is inspected according to the third-grade forging and internal hardening treatment, high durability. Above process is strictly checked and strict non-destructive testing.
Pressure: 5000 ~ 10000 psi
Material: 35CrMoA or 40CrMoMn
Brand: NATIONAL, GD, EMSCO, OILWELL, IDECO, DRILLMEC, WEATHERFORD, BOMCO, TSC, EWCO, AMERICAN BLOCK, EWECO, HONGHUA, LS NOV, WIRTH, RONGSHENG
Oee is a large mud pump, fluid end expendables and drilling wellhead tools manufacturer in china.
We mainly manufacturer emsco f-500, f-800, f-1000, f-1300, f-1600, gardner denver pz-9 and national 12-p-160 mud pumps. The quality products, competitive prices, respensive service and short delivery time earn a lot of reputation for us.
F series mud pump is applicable to the requirement of high pump pressure in oilfield and high displacement technology of well drilling with its solid and compact structure, small vallume and outstanding operation performance .It has long stroke maintaining operation at lower frequency resulting in enhancing the performance of giving water efficiency and prolonging the lifetime of the consumable hydrokinetic parts. The air-suction kit is advanced in structure and reliable at operation to reach the optimized absorbing target of air suction into linepipe.
F series pump powering side adopts the combined lubrication of forced and flashing lubrication featured with reliable lubrication and adding the operacation lifetime of powering part.
The series pump is producted strictly according to api spec 7k"the equipment specification of well drilling and repairing" , and performed the ex-work test under the specification thereof.
Model pz-9 mud pump is a horizontal triplex single acting piston pump which has the advanced structure and small in size. It has the reliable performance, good exchangeability, easy maintenance.
The pump consists of two main sections: power end & fluid end. Power end includes pump case pinion shaft, crankshaft, back cover, connection rod, crosshead etc.
Fluid end includes valve pot assembly, valves, cylinder liners, pistons, discharge manifold and suction manifold, etc.
In order to prevent the water-hammer and reduce pressure difference in the outlet side, of the pump.
The gears, bearings, crosshead in the power end adopt splash system and pressure lubrication system. This guarantees a good lubrication.
The cylinder liners & the pistons in the fluid end is cleaned and cooled by a centrifugal spray pump with lubrication water.
This pump has a complete set of special tools for general maintenance & repair.
Quick Information
Brand Name:SaigaoPlace of Origin:China:
Description
We are Saigao group can do piston and Plunger pump. Such as the following:
BW Series Mud Pump
BW Series Mud Pumps are mainly used for supplying flushing fluid to the borehole in core, geothermal, water resource, shallow oil, CBM and other drilling process. The fluid can be divided into mud, water, etc. They also can be used as transfer pumps of the above-mentioned medium. This series of mud pumps are with simple structure and easy to maintain and operate. Piston, lip-shaped and self-sealing type, is made of rubber or PTFE and nylon pads, equipped with shock-resistant pressure gauge, necessary spare parts and special tools. Bi-metal liner can be used to extend service life of pump greatly.
NBB Series Mud Pump
NBB Series Mud pumps are mainly used for the core, coal geology, metallurgy geology, hydrogeology engineering hole drilling fluid is supplied, flushing fluid can be divided into mud, water, etc., may be used as the above medium pump.
Structural features
The mud pump is crank structure, horizontal triplex single acting piston pump, the piston is self-sealing lip, made of rubber or PTFE and nylon protective pads pressed, the pump adopts auto gearbox, variable five kinds of flow, the pump is compact, high efficiency, durable, safe, reliable, easy maintenance, low maintenance costs.
ZB Series Grouting Pump
ZB Series grouting pumps are mainly used for kinds of weak corrosivity viscous and nonviscous liquid grouting(such as water, mud), especially for vertical shaft working face grouting, goaf filling, coal mine water inrush governance and so on.
The pump is triplex single-acting plunger high pressure pump, fitted with international first-class gearbox, which is of features like compact structure, multistage speed regulation, realizing different flow rate and pressure, meeting the grouting requirements of different formation. Electric motor drives triplex pump through transmission system. It has many advantages, like convenient adjustment for pressure and flow rate, long service life and so on.
3NB & 5NB Series Mud Pump
3NB & 5NB Series Mud Pumps are mainly used for oil, water well, geothermy, CBM, shale gas, coalfield exploration, freezing well as well as well other drilling ,well cementation, work-over and other operations in industrial and mining enterprises. It is used for transferring mud, clay gum, mortar and other medium to the borehole. The pump adopts international advanced technology. It is characterized by advanced structure, reliable operation, good suction performance, long service life of wearing parts, easy for maintenance and repairing and so on.
F Series Mud Pump
F Series Mud Pumps are mainly used in oil field and geological prospecting for well drilling, well work-over, cementing, water shut off, water flooding and sending mud, clay, grout and so on.
