output power RMS): 150W +150W 4
with BLUETOOTH function
with USB/SD & FM function
6 MIC input
double 10-band graphic EQ
Panel size(LxH): 48.3x 22(cm)
430*380*22MM
11KG
output power: 60W
output mode: 4-16ohm/70v/100v
with USB/SD & FM function
remote control
with BLUETOOTH function
independent control or left and right sound volume
2 MIC input
Panel size(LxH): 28x 6.5(cm)
Size:280*205*65mm
- aluminum front panel
- 60w+60w output power
- optical function
- hdmi support hifi devices input ( 2 way input, 1 way output)
- usb slot support mp3/wma format audio files
- wireless bluetooth function
- with microphone input function
- a/b group output seperately control
- electrical fan cooling
Features:
- aluminum hair line front panel and knobs
- toroidal big power transformer, original imported amplifier tube
- usb/sd slot support mp3, wma, hifi ape, flac format audio files
- with lcd display
- bluetooth receiver, compatible with ios and android system
- fm tuner, automatic search and save channels, can preset 50 channels
- high level digital karaoke, can match with wireless microphone
Aluminum front panel, toroidal transformer
Dual-10 phase eq, 6 way microphone inputs
Usb/sd card slot support mp3/wma audio files, led display, fm tuner, remote control
515*420*770mm, 3sets per ctn
118 Amplifiers Suppliers
Short on time? Let Amplifiers sellers contact you.
The vp series power amplifier offers clean, reliable power in a durable enclosure. If you need professional amplification performance, the vp series is perfect for delivering pure, consistent wattage night after night.
With six models power upto 1200 watts, the vp series is ideal for powering pa systems and dj rigs. To ensure seamless, reliable performance, the amp features variable-speed cooling fans for thermal stability, along with short-circuit, thermal, over current, thermal protection.
For connecting convenience, the vp series boasts xlr and speakon &banana binding post outputs. The unit also provides front panel indicators for signal, limit, protect and power, plus level controls for channels 1 and 2. Selectable modes for stereo and mono bridge give you even more flexibility.
Selectable output power range to drive professional loudspeakers without clipping
Variable-speed cooling fan for thermal stability and reliability
Xlr balanced inputs and speakon &banana binding post outputs
Limiter indicator for amp output protection
Stereo and mono bridge
Variable speed fan for low noise
Comprehensive front panel indicators including signal, limiter, protect and power
Dc output protection and short circuit protection
Frequency response 10hz c 50khz at 1.5 db
Total harmonic distortion: less than 0.05%
Input sensitivity & impedance: 0.775v
Signal to noise (20 hz - 20 khz) > 95db
* Switching power supply
High efficiency and stability of the new switching power supply so that the signal transmission speed faster and more stable voltage changes, sensitivity stronger, lighter weight.
* Intelligent signal limiter
Each channel has an independent output signal overload distortion, automatic pressure limited function, when the output signals are now clipping distortion can be quickly restored to the output signal compression is not the biggest distortion level and no reduction in the frequency response of audio signals, to avoid DC level because of the audio signal output and burned speakers.
* Multiple detection, multiple protection
A soft start, the second start, the (low) pressure protection, output overload and short circuit protection.
* High efficiency, low fever
Efficient Class H amplifier, significantly reduce heat loss.
* Pristine audio
Metal Packaging, high-power transistors, Yanyi a pure, passionate, authentic audio effects.
* Removable face Network
Removable the hole into the wind-net, easy cleaning.
FP-series Switching Power Amplifier
ITEM: FP-2200 / FP-2400 / FP-2600 / FP-2800
Output Power: 20-20kHz, 1W with 1 khz
8¬+Stereo Power(RMS): 350W f- 2 / 550W f- 2 / 750W f- 2 / 950W f- 2
4¬+Stereo Power(RMS): 500W f- 2 / 800W f- 2 / 1150W f- 2 / 1350W f- 2
8¬+Bridged Power(RMS): 1000W / 1600W / 2100W / 2300W
Frequency Response(+o/-0.3dB,1W/8¬+): 20-20KHz+0.5dB
THD+N: 10KHZ<0.05%
Signal-to-Noise Ratio: 103dB
Slew Rate: 40V/uS
Input Connectors (per channel): Female XLR (pin 2+, configurable for pin 3+). TRS (tip+)
Output Connectors (per channel): 5-way binding posts or Speakon connectors (market dependent)
Class: H
TourClass Protection: ACL,IGM, AutoRamp, short circuit, DC voltage, turn-on/off transient, current inrush, sub/ultrasonic input
Voltage Gain(dB): 20
Cooling: 4pcs variable speed DC fans, better than conventional cooling
Controls Front panel: 2 attenuators, power switch; Rear panel: signal ground lift and mode switches
Dimensions (Wf-Hf-D): 483f-88f-480mm
Packing dimension: 610f-590f-170mm
Net weight(kg): 10.2 / 11.6 / 12.5 / 14
Gross weight(kg): 12.7 / 14.1 / 15 / 16.5.
F600 Power Amplifier Key Feature:
* 2/3U high, heavy duty steel chassis
* Modular construction for easy servicing
* Symmetrical layout for even weight distribution
* High efficiency toroidal power transformer
* Oversized, high energy, linear power supply
* 3 steps, Class H Audio topology
* Stereo, parallel or bridged operation
* Twin balanced inputs (Neutrik XLR connectors)
* Dual Speakon and Binding posts outputs
* High quality components used throughout
* Dual, continuously variable speed fans
* Efficient two sides cooling, the efficiency is better than back to front cooling
* Active, signal, protect and critical indicators
* Duraluminium, 8mm thick front-panel
* Unobtrusive carrying handles
* Voltage Gain: 35 or 40 dB .
Specification:
8ohms Stereo Power(RMS): 2X300W
4ohms Stereo Power(RMS): 2X462W
8ohms Bridged Power(RMS): 968W
Frequency Response(+o/-0.3dB, 1W/8ohms: 20Hz-20kHz, -3dB@135kHz
Power Bandwidth(rated power at 4ohms 1%THD+N): 20Hz-20kHz, -. 1.1dB/+0dB
TourClass Protection: ACL, IGM, AutoRamp, short circuit, DC voltage, turn-on/off transient, current inrush, sub/ultrasonic input
THD+N (1kHz 1W ): -60dB
Voltage Gain (rated power @ 8Ic): X35dB
Input Sensitivity (rated power at 8Ic): 0.97V
Input Impedance (balanced/unbalanced): 20KIc/10KIc
S/N Ratio ("A"weighted, full power at 4ohms): 99dB
Crosstalk ("A"weighted, full power@4ohms): >-63dB
Class: 3 Step H
Input Connectors (per channel): Female XLR (pin 2+, configurable for pin 3+). TRS (tip+)
Output Connectors (per channel): 5-way binding posts or Speakon connectors (market dependent)
Supply Power: 1320W
Power Supply (factory configured): AC220V/230V, 50-60Hz
Cooling: Two side panel variable speed DC fans, better than conventional cooling
Controls: Front panel: 2 attenuators, power switch; Rear panel: Signal ground lift & mode switches.
LED Indicators (per channel): Signal, Protect, Active, Critical
Construction: Steel chassis, 16 gauge. Casting Aluminum front panel.
Dimensions (HXWXD): 88X483X480mm (2U)
Net Weight: 19.2kg
Gross Weight: 23kg.
Features:
High power round transformer, low work noise, Low magnetic leakage, high efficiency Device infixed to prevent front thunder and over voltage
Automatic over current and short circuit Automatic reset circuit. Sound Light alarm Inside power Plug-in and tree- way feed output
Ranging from 3Amps to 10Amps.
Technology Parameter
Item UnitForwardRemark
FrequencyMHZ5-1000
Input voltageAC220í+10%
Output voltageAC60v í+ 10%
Plugging lossDB< or =0.5
Return lossDB>15
Return timeS5 í+5
Max output current Sum of all output current must be under the MAX current
VolumeMn270mn*195
Dimensionsmm268*212*197
WeightKGS6.7.
Detailedú¦
1. SMD electronic hardware,SMT technologyical maintain high quality.
2. Corrar clip transmitter,high sensitivity,prevent howling,clear timbre.
3. Quartz surge circuitry,steady frequency without disturbance.
4. 65 group VHF 180-265MHz.no disturbance in frequency,have large scope for selection.
5. Two kind of power to choose:built-in rechargeable battery,external 12V DC.
6. When use the DC sudden power off,embedded storage battery auto-work.
7. Wire and wireless microphone loadspeaker.
8. With digital reverberation.
9. Collar clip microphone and handhoid microphone for your choice.
DVD function.
Output Power:2X75W(8ª+)
2X90W (4I)
Frenquency Response:20Hz-20KHzí+3dB
Input Sensitivity:250mv
SNR:85dB
Distortion: <0.5%
Power Voltage: 220-240V/50-60Hz
Height X With X Depth: 150 X 430 X 325mm
Weight: 8kg
Introduction
C-mark ga500 digital mini amplifier, powered by built-in integrative digital power amplifier, features light weight, high efficiency, best sound, safe protection, incredible compatibility of electromagnetism and open choices of 110vac&220vac power supply.
Features
1. Plug & play, user-friendly, clear indication, easy manipulating for nonprofessionals.
2. The digital power amplifier features best sound, high efficiency and high reliability.
3. Complete protection from short circuit, over surge current, over heat, over voltage, power limiting, over temperature frees users from worry of malfunction.
4. The amplifier can be configured three output modes, stereo, mono and bridged. Signal input/output adopts ª)6.35 stereo interface for balance signal transmission.
5. Suitable for many applications like commercial, company, entertainment, school and army etc.
Specifications
Output power
8ª+: 300w x 2 (1khz)
4ª+: 600w x 2 (1khz)
Bridged
8ª+: 1000w (1khz)
Free power combination from 1pcs to 7pcs in a standard rack as you like, if 7 pcs combined, max power can reach 8ª+ 300w x 14=4200w;4ª+ 600w x 14=8400w;8ª+ bridged 1000w x 7 =7000w channel.
Input sensitivity: 0db
Model name: H1.3D1
3-channel with built-in 2in-3out, DSP is fm Germany.
channel-1: 250W@8ohms, 500W@4ohms; RMS
channel-2: 1200W@8ohms, 2300W@4ohms;RMS
channel-3: 120W@8ohms, 2300W@4ohms;RMS
Size:150mm X 431mm X 70mm (WXLXH)
Please check detail pictures on our website http://www.ad-power.cn.
EDFA Optical Amplifier 1U Rack
EDFA is the erbium-doped fiber amplification board. Its main function is to compensate the power of the signal optical in the transmission line, and it can amplify the optical signals of up to 48 channels with 100 GHZs interval) or 96 channels with 50 GHZ s interval) at C band at the same time. It has characters of flat gain, locked gain, low noise index, etc. It's an indispensable and important component for DWDM system, future high speed system and all-optical network long-distance transmission.
