Sky-art Audio Electronical Device Manufacturer

Features :

* Switching power supply
High efficiency and stability of the new switching power supply so that the signal transmission speed faster and more stable voltage changes, sensitivity stronger, lighter weight.
* Intelligent signal limiter
Each channel has an independent output signal overload distortion, automatic pressure limited function, when the output signals are now clipping distortion can be quickly restored to the output signal compression is not the biggest distortion level and no reduction in the frequency response of audio signals, to avoid DC level because of the audio signal output and burned speakers.
* Multiple detection, multiple protection
A soft start, the second start, the (low) pressure protection, output overload and short circuit protection.
* High efficiency, low fever
Efficient Class H amplifier, significantly reduce heat loss.
* Pristine audio
Metal Packaging, high-power transistors, Yanyi a pure, passionate, authentic audio effects.
* Removable face Network
Removable the hole into the wind-net, easy cleaning.

FP-series Switching Power Amplifier
ITEM: FP-2200 / FP-2400 / FP-2600 / FP-2800
Output Power: 20-20kHz, 1W with 1 khz
8¬+Stereo Power(RMS): 350W f- 2 / 550W f- 2 / 750W f- 2 / 950W f- 2
4¬+Stereo Power(RMS): 500W f- 2 / 800W f- 2 / 1150W f- 2 / 1350W f- 2
8¬+Bridged Power(RMS): 1000W / 1600W / 2100W / 2300W
Frequency Response(+o/-0.3dB,1W/8¬+): 20-20KHz+0.5dB
THD+N: 10KHZ<0.05%
Signal-to-Noise Ratio: 103dB
Slew Rate: 40V/uS
Input Connectors (per channel): Female XLR (pin 2+, configurable for pin 3+). TRS (tip+)
Output Connectors (per channel): 5-way binding posts or Speakon connectors (market dependent)
Class: H
TourClass Protection: ACL,IGM, AutoRamp, short circuit, DC voltage, turn-on/off transient, current inrush, sub/ultrasonic input
Voltage Gain(dB): 20
Cooling: 4pcs variable speed DC fans, better than conventional cooling
Controls Front panel: 2 attenuators, power switch; Rear panel: signal ground lift and mode switches
Dimensions (Wf-Hf-D): 483f-88f-480mm
Packing dimension: 610f-590f-170mm
Net weight(kg): 10.2 / 11.6 / 12.5 / 14
Gross weight(kg): 12.7 / 14.1 / 15 / 16.5.

8ohms Stereo Power(RMS): 2X1050W
4ohms Stereo Power(RMS): 2X1600W
Frequency Response(+o/-0.3dB, 1W/8ohms): 20Hz-20kHz, -3dB@135kHz
Power Bandwidth (rated power at 4ohms 1%THD+N): 20Hz-20kHz, -. 1.1dB/+0dB
TourClass Protection: ACL, IGM, AutoRamp, short circuit, DC voltage, turn-on/off transient, current inrush, sub/ultrasonic input
THD+N (1kHz 1W ): -60dB
Voltage Gain (rated power @ 8ohms): X40dB
Input Sensitivity (rated power at 8ohms): 0.8V
Input Impedance (balanced/unbalanced): 20Kohms/10Kohms
S/N Ratio ("A"weighted, full power at 4ohms): 96.5dB
Crosstalk ("A"weighted, full power@4ohms): >-65dB
Class: 3 Step H
Input Connectors (per channel): Female XLR (pin 2+, configurable for pin 3+). TRS (tip+)
Output Connectors (per channel): 5-way binding posts or Speakon connectors (market dependent)
Supply Power: 4158W
Power Supply (factory configured): AC220V/230V, 50-60Hz
Cooling: Two side panel variable speed DC fans, better than conventional cooling
Controls: Front panel: 2 attenuators, power switch; Rear panel: Signal ground lift & mode switches.
LED Indicators (per channel): Signal, Protect, Active, Critical
Construction: Steel chassis, 16 gauge. Casting Aluminum front panel.



Dimensions (HXWXD): 132X483X480mm (3U)
Net Weight: 33.5kg
Gross Weight: 34.35kg.

3-channel with built-in 2in-3out German-made DSP
channel-1: 250W@8ohms, 500W@4ohms; RMS
channel-2: 250W@8ohms, 500W@4ohms; RMS
channel-3: 250W@8ohms, 500W@4ohms; RMS
Size:104mm X 223mm X 60mm (WXLXH)

Please check our product on http://www.ad-power.cn


packed into carton

Model name: H1.3D1
3-channel with built-in 2in-3out, DSP is fm Germany.
channel-1: 250W@8ohms, 500W@4ohms; RMS
channel-2: 1200W@8ohms, 2300W@4ohms;RMS
channel-3: 120W@8ohms, 2300W@4ohms;RMS
Size:150mm X 431mm X 70mm (WXLXH)

Please check detail pictures on our website http://www.ad-power.cn.


Each piece into carton