Find Verified Fruits Suppliers, Manufacturers and Wholesalers

Floor leather can be divided into common floor leather, homogeneous floor leather and PVC floor leather production line.

PVC homogeneous floor leather production line -- produce and manufacture PVC homogeneous leather; PVC homogeneous floor is made by a variety of colors of PVC broken particle material in a reasonable ratio, which is heated and pressed. Due to its environmental protection and ornamental, easy maintenance characteristics, it is mainly used in residential, hospital, school, factory, hotel, catering, aircraft, train, bus, hospital, entertainment hall, stadium and other public places of the ground laying materials. The PVC homogeneous floor leather production line researched and developed by Gwell company adopts advanced and practical technology to be reasonable and convenient to operate, and it can produce various of homogeneous floor leather with floral spot pattern with thickness of 2-3mm and width of 2000mm.
PVC wide floor leather production line - produce of ordinary household PVC floor leather. PVC floor leather is wear-resistant, corrosion-resistant, anti-skid, anti-seepage and flame retardant. It is widely used in locomotives, hotels, entertainment halls, exhibition halls and families. The production line is simple in structure and easy to operate. It can be configured with different equipment components according to customers' requirements. It can also add the winding device to produce internal enhancement products or surface composite non-woven cloth, PVC decorative film and other products.

Seam welder is used to weld a short piece of coil into pipe.
FUGE designs the seam welder applicable to various material. It's also installed with auto wire feeder for thick pipe, and also configured with option for auto alignment device as to help operator handling the seam welder easier.
Seam welder contains many different models based on different welding length. The longer the seam welder is, the stronger the welding shaft will be, and then the bigger its minimum applicable diameter.

Fig. No. REJ130
Size: DN32-DN300
Cover/Tubel: EPDM,NBR,NR, CSM,VITON,SILICON upon request
Flange : Carbon Steel, Ductile Iron,AISI304, AISI316 .
Flange drilling according to EN1092-2 PN10/PN16,AS2129 Table D/E, AS4087 PN16,ANSI150,JIS10K
Working Pressure: PN10, PN16.
Hydralic Test according to EN12266-1, ISO5208
WRAS approved Rubber also available on request.

Fig. No. G1000
Size: DN15-DN50
Design Standard: EN1074-1.2
Internal & External Coating : DIN30677-2
Threaded End according to BSPP, NPT
Working Pressure: PN10, PN16.
Hydralic Test according to EN12266-1, ISO5208
Material conform to EN-GJS500-7.

Fig. No. G1000
Size: DN15-DN50
Design Standard: EN1074-1.2
Internal & External Coating : DIN30677-2
Threaded End according to BSPP, NPT
Working Pressure: PN10, PN16.
Hydralic Test according to EN12266-1, ISO5208
Material conform to EN-GJS500-7.

Fig. No. G4015-V
Size: DN40-DN300 ( OD50-OD315)
Design Standard: EN1074-1.2 ,DIN3352-F5
Face to Face: EN558-1 15 Series, DIN3202-F5.
Socket End according to BS EN12842
Working Pressure: PN10, PN16.
Hydralic Test according to EN12266-1
Material conform to EN-GJS500-7.

Ball Check Valve
Fig. No. CV48S
Size: DN25-DN80 for Threaded End,DN40-DN600 for Flanged End
Design Standard: EN12050-4
Face to Face: EN558 Series48
Threaded according to ISO228-1,BSPP
Flange drilling according to EN1092-2 PN10,PN16, ISO 7005-2 PN10,PN16
Working Pressure: PN10.PN16
Hydralic Test according to EN12266-1, ISO5208
Material conform to EN-GJS500-7.
Counterweight Control Lever for selection.
Suitable for both horizontal and vertical installation

Fig. No. CV3202
â?¢Size: DN40-DN600
â?¢Design Standard: EN1074-1.3
â?¢Face to Face: DIN3202-F6
â?¢Flange drilling according to EN1092-2 PN10/PN16.
â?¢Working Pressure: PN10, PN16.
â?¢Hydralic Test according to EN12266-1, ISO5208
â?¢ Material conform to EN-GJL-250,EN-GJS500-7.
â?¢ Counterweight Control Lever for selection.
â?¢ Suitable for both horizontal and vertical installation
* EN1074-1.3

Fig. No. Y3202
?¢Size: DN15-DN600
?¢Design Standard: EN1074-3
?¢Face to Face: EN558-1 Series 1
?¢ Flange Drilling according to ISO228-1,BSPP
?¢Working Pressure: PN10.PN16
?¢Hydralic Test according to EN12266-1, ISO5208
?¢ Material conform to EN-GJS500-7.
?¢ Suitable for vertical installation

Fig. No. REJ130
Size: DN32-DN300
Cover/Tubel: EPDM,NBR,NR, CSM,VITON,SILICON upon request
Flange : Carbon Steel, Ductile Iron,AISI304, AISI316 .
Flange drilling according to EN1092-2 PN10/PN16,AS2129 Table D/E, AS4087 PN16,ANSI150,JIS10K
Working Pressure: PN10, PN16.
Hydralic Test according to EN12266-1, ISO5208
WRAS approved Rubber also available on request.

1.Brief introduction of QZ-2B gasoline engine sampling drilling rig
QZ-2B gasoline engine sampling drilling rig is produced by Shandong Master Machinery Group Co.,Ltd. It is suitable for geological industrial and civil buildings, bridges, railway, highway, hydro-power industry survey, geophysical exploration, advanced drilling and grouting hole drilling, embedded hole guiding, broken hole, hole and small household wells check out.
QZ-2B gasoline engine sampling drilling rig has the following features: compact structure, small volume, light weight, two gears, easy to move.
2. Technical parameters of QZ-2B gasoline engine sampling drilling rig
QZ-2B gasoline engine sampling drilling rig
Bottom hole diameter (mm) 32-91


Drilling depthm soil 9110-15m
stone915-10m
stone7510-15m
stone6015-20m
stone4620-25m
Drilling pipe (mm) 28
Rotating speedr/min 200-570
Torquen.m 110
Gasoline engine house power(hp 5 (3.5kw)
displacementcc 196
Dimensionl*w*h 600*450*1900
Weightkg 90
3.Configuration list of QZ-2B gasoline engine sampling drilling rig
Item Parameter Unit Quantity
Gasoline engine sampling drilling rig QZ-2B set 1
Drilling pipe 28*1500 pc 6
Drilling pipe 28*800 pc 8
Pipe joint 35 pc 14
Reducing nipple 45/35 pc 1
Core barrel 45*800 pc 1
Alloy bit 46 pc 1
Reducing nipple 58/35 pc 1
Core barrel 58*800 pc 1
Alloy bit 60 pc 1
Three-wing bit 60 pc 1
Safety clamp hold 1
Water seal 30*50*10 pc 4
Oil seal 30*50*10
Oil seal 17*50*10
Control wheel pc 1

1.Brief introductions of QZ-1A two phase electric sampling drilling rig
QZ-1A is a two phase electric sampling drilling rig produced by Shandong Master Machinery Group Co.,Ltd. It is suitable for all kinds of geological exploration, like industrial and civil buildings, bridges, railways, roads and so on. QZ-1A two phase electric sampling drilling rig is only 80kg; height is less than 2 meters, and the drilling rig can been break down structure. Hence it is easy to move and operated.
2.Technical parameter s of QZ-1A two phase electric sampling drilling rig
QZ-1A two phase electric sampling drilling rig
Borehole diameter (mm) 32-46
Drilling depth (m) Soil layer: 20-25
Lithosphere: 15-20
Drilling pipe diameter (mm) 25
Rotate speedï¼?r/minï¼? 175
Torque (n.m) 80
Power (kw) 1.5
Dimensions (l*w*h) 600mm*450mm*1900mm
Weight (kg) 80
3.Configuration list of QZ-1A two phase electric sampling drilling rig
Item Parameters Unit Quantity
Two phase electric sampling drilling rig QZ-1A set 1
Drill pipe(mm) 25*1500 pc 6
Drill pipe(mm) 25*800 pc 8
Joint(mm) 32 pc 14
Core barrel(mm) 32*800 pc 1
Alloy bit(mm) 32 pc 1
Reducing nipple(mm) 45/32 pc 1
Core barrel(mm) 45*800 pc 1
Alloy bit(mm) 46 pc 1
Three-wing bit(mm) 60 pc 1
Safety clamp pc 1
Water seal Y Type 30*45*8 pc 4
Control wheel set 1

1.The range of application of 15 meters crawler rotary pile drilling rig with square power rod
The 15 meters crawler rotary pile drilling rig with square power rod is suitable for soil layer, clay layer, fill layer, silt layer, silt layer and some strata containing pebbles, gravel and strong weathered rock. It is widely used in building construction,, high speed rail contact network support, slope protection pile, city construction, civil building, new rural construction, power grid transformation, garden greening and many other projects.
2.The characteristics of 15 meters crawler rotary pile drilling rig with square power rod
High efficiency and energy saving hydraulic system, large torque full hydraulic power head, 360 degrees of free rotation, wide application, high construction efficiency, stable performance, environmental protection and energy saving and other advantages, deep pile driving, fast speed convenient displacement. compared with large rotary drilling rig,This drilling rig has the characteristic of low cost of purchase, low cost of transportation, quick income. These characteristic shows its economy and engineering adaptability.
3.The technical parameters of 15 meters crawler rotary pile drilling rig with square power rod
The 15 meters crawler rotary pile drilling rig with square power rod adopts two kinds of drilling models, self weight pressure and cylinder pressure, which can achieve 5-15 meters deep and using different sizes of drilling tools, the maximum diameter of pile holes can reach 1500mm.
Item Unit Parameters
XWDF-15 crawler rotary pile drilling rig with square power rod
Working mode cylinder pressure wire rope deadweight
Drilling hole diameter mm 500-1500
Drilling hole depth m 15 10-26
Dimension m 8.7*2.3*3.1
Weight (excluding drilling tools in standard configuration) t 13
Maximum torque of power head kn.m 26000
Power head rotating speed r/min 20-40
Turntable rotation angle Full gyration
Maximum moving speed km/h 2.6
Maximum grade ability ° 25
Engine model / 6105 medium cold turbocharging in Weifang
Engine power kw 145

1.Brief introductions of SH30-2A exploration drilling rig
SH30-2A exploration drilling rig is modified and designed on the basis of SH30 exploration drilling rig. The exploration drilling rig can be used for the covering layer of fourth Century, such as soil, clay, sand and gravel, and all kinds of mixed soil and fill. It is mainly used in the exploration of gold sand, industrial buildings and civil buildings as well as highway, railway, bridge and other engineering geological prospecting work.
2.Features of SH30-2A exploration drilling rig
SH30-2A exploration drilling rig is simple operate and has high degrees of mechanization. With light weight, compact structure, good disintegration performance and convenient handling, the SH30-2A exploration drilling rig can be removable in the mountain area and is equipped with a pair of rubber wheels. The machined can be towed between different drilling holes on constructions site. .
3.Applications of SH30-2A exploration drilling rig
The SH30-2A exploration drilling rig has two kinds of drilling methods: impact and rotation. Therefore, the drilling tools of the drilling machine are divided into two kinds: impact tools and rotary tools. In order to meet the customer's individualized demand, the drilling tools are equipped in accordance with the demand , and the standard configuration does not include the rotary drilling function.
4.Impact tool of SH30-2A exploration drilling rig
The tools used for impact drilling include lifting joints, weighting rods, impact rods, guiding pipes and impact drills. When the soil sample is used, the drilling tool used is the same as above, but only the impact bit is changed into a soil sampler.
Using sand cylinder for sand gravel and other tools are lifting joint, rod, movable joint, sand lifting cylinder. When drilling in sand and pebble layer, casing must be lowered to protect the hole wall and prevent collapse. With complete free chain clamp c
5.Rotary tool (Not include in standard configuration).
Rotary Table, Auger Drilling Pipe, Rotary Table Pipe Adapter,
6.Specifications of SH30-2A exploration drilling rig
SH30-2A exploration drilling rig

Drilling depth 30m
Drilling pipe diameter 42mm
Aperture diameter 142mm
End hole diameter 110mm
Drill form and vertical height 4 legs, 6m
Power
Motor Y132S2-2/ 7.5kw/3000 r/min
Diesel engine D180Z/ 8hp/2400 r/min
Windlass
Lifting speed 0.24/ 0.57/1.48m/s
Maximum lifting power (single rope, low speed) 15kn
Turntable
Diameter 150mm
Turntable speed 18/44/110r/min
Dimension
Length*width*height 1780*1010*900mm
Weight 500kg

1.Brief introductions of YQZ-30 hydraulic core drilling rig
YQZ-30 hydraulic core drilling rig is a small portable diesel oil drilling machine. It is mainly used for prospecting and exploration, geophysical exploration,drilling engineering such as road construction and blasting hole, shallow oil, natural gas and groundwater drilling. It also can be used for engineering drilling of dam grouting and tunnel ventilation and drainage. The drilling depth of YQZ-30 hydraulic core drilling rig is 30 meters. The open hole diameter is 89mm, and the final hole diameter is 75mm.
2.Features of YQZ-30 hydraulic core drilling rig
·Oil pressure automatic feeding mechanism, high drilling efficiency.
·Using the upper ball clamp mechanism, non-stop re-chuck
·Handles are centralized, easy to operate, safe and reliable.
·Compact structure, small floor space.
·The shell of drill rig and gearbox are made of aluminum. The shell reduce the weight of the fuselage.
· Easy to decomposition and move, suitable for working in hilly terrain, mountainous areas and other complex terrain.
3. Technical parameters of YQZ-30 hydraulic core drilling rig
Main engine
Drilling depth 30m Drill pipe diameter 42mm
Open hole diameter 91-110mm End hole diameter 75 mm
Drilling rig weight 198kg(No power) Drilling rig dimension 1400*600*1055mm
Windlass
Maximum hoist capacity 4kn Coiling block diameter 90mm
Wire rope diameter 8mm Maximum length 18m
The band type brake diameter 200mm The band type brake width 35mm
Vertical shaft
Rotating speed 136/338/578r/min Stroke 400mm
Maximum pressure 8kn Lifting power 10kn
Oil pump
Model YBC20/125 Rated pressure 12.5Mpa
Rate of flow 20ml/r Rated rotate speed 1500r/min
Power
Diesel engine R180 Cooling type water-cooling
Rated power 5.67KW Rated rotate speed 2600r/min
4.Configuration list of YQZ-30 hydraulic core drilling rig
Item Specification Unit Quantity
Hydraulic core drilling rig YQZ-30 Platform 1
Drill pipe including joint 42 m 30
Reducing nipple joint 57/57 pc 2
Reducing nipple 89*57 pc 1
Opening pipe 89 pc 1
Alloy bit 91 pc 1
Reducing nipple 73 pc 1
Core barrel 73 pc 1
Diamond bit 75 pc 1
Water pump diesel engine power set 1
Drill tower 3m set 1
Wire rope 10mm m 20
Rope cappel pc 4
U shape ring pc 1
Flat square main rod 2m/pc pc 1
Reducing nipple for main rod pc 1
Water faucet pc 1
Lifter pc 1
U-fork 57 pc 1
Safety clamp 57 pc 1
Pliers 24 pc 1
L-wrench 73/89 pc 2

1.Brief introductions of QZ-3 diesel engine sampling drilling rig
The QZ-3 diesel engine sampling drilling rig is independently developed by Shandong Master Machinery Group Co.,Ltd., which is a portable multi-purpose drilling rig. The QZ-3 diesel engine sampling drilling rig is equipped with a hoist, which is more convenient for geological drilling and lifting. It can do standard drilling hole, earth sampling and cone penetration with the heavy hammer.
The QZ-3 diesel engine sampling drilling rig uses diesel power, and it is more convenient to purchase oil. The rig is reasonable in design, advanced in structure, easy to assemble and disassemble, small in size, light in weight and easy to transport, which brings great convenience for field investigation and construction.
2. Technical parameters of QZ-3 diesel engine sampling drilling rig
QZ-3 diesel engine sampling drilling rig
Borehole diameter (mm) 46-110



Drilling depthï¼?mï¼? soil LayerÏ?110ï¼?15-20m
lithosphereÏ?91ï¼?20-25m
lithosphereÏ?75ï¼?25-30m
lithosphereÏ?60ï¼?30-40m
lithosphereÏ?46ï¼?40-50m
Drilling pipe diameter (mm) 30
Torqueï¼?n.mï¼? 180
Dimensionï¼?l*w*hï¼? 680*1200*3800(highly customizable)
Weightï¼?kgï¼? 165
3.Configuration List of QZ-3 diesel engine sampling drilling rig
Item Specifications Unit Quantity Remarks
Base



QZ-3 pc 1
Geological engineering drilling rig
Winding engine pc 1
Drilling tower pc 2
Manual windlass pc 1
Diesel engine pc 1
Gear box pc 1
Drilling pipe including joint 30*1000 pc 15 Drill pipe
Drilling pipe including joint 30*2000 pc 5
Reducing nipple 58/38 pc 1 60mm core drill tool
Core barrel 58*800 pc 1
Core barrel 58*1500 pc 1
Diamond bit 60 pc 1
Reducing nipple 73/38 pc 1 75mm core drill tool
Core barrel 73*800 pc 1
Diamond bit 75 pc 1
Safety clamp
Tool
Pipe wrench
Drill rod tong
Oil seal pc 2 Vulnerable parts
Safety plate pc 1

Tufflex polyurethane screens come in fully welded, partially welded and rectangular welded variations. The brightly coloured material is lightweight and smooth, which makes it much easier to handle when delivering, storing, installing or removing.

Screening innovation in the past has been limited to tweaks and modifications, slightly different apertures or better hooking. The introduction of Tufflex screens a few years ago was akin to the introduction of smartphones versus traditional mobile phones. We never really knew we needed a phone with a camera, a GPS and in-built games, but now its hard to imagine life without one.

Just as smartphones cover off the traditional functionality of making phone calls, Tufflex is used for screening product in the quarry market. It offers improved screening efficiency, substantially increased wear life, increased production uptime and occupational health and safety (OHS) benefits due to its light weight and flexibility.

While there are a set range of apertures (1.5mm to 45mm square) to choose from, the Tufflex process has great flexibility in manufacturing unique aperture combinations to rope diameters and aperture slot lengths. For example, in some quarry plants in Japan, a 14 aperture screen is used as the bottom deck for their No. 5 spec (20mm to 13mm) or the top deck for the No. 6 spec. The Tufflex specification is an 8mm rope on top and a 6mm rope from hook to hook, a combination not available in traditional woven wire.

Long-slotted apertures, ie 8 x 340mm, are used in some side-tensioned equipment where flexibility of the screening surface is needed. This type of aperture, while possible to weave in wire, would not have the mechanical stability for a vibrating application, whereas Tufflex screens were developed with this in mind. These larger configurations can also be used as an alternative to harp/piano screens.


Get quotation:
TEL:+86-311-80690567
Mobile Phone: +8613383118952 Contact me with WhatsApp
Email : team11@huataolover.com
Address:NO.298 ZHONGHUA NORTH STREET ,XINHUA DISTRICT, Shijiazhuang, China.
Zip:050000
Wechat:13383118952
Website: www.tufflexscreen.com

Rectangular Welded Tufflex
Tufflex polyurethane screens come in fully welded, partially welded and rectangular welded variations. The brightly coloured material is lightweight and smooth, which makes it much easier to handle when delivering, storing, installing or removing.

Screening innovation in the past has been limited to tweaks and modifications, slightly different apertures or better hooking. The introduction of Tufflex screens a fe years ago was akin to the introduction of smartphones versus traditional mobile phones. We never really knew we needed a phone with a camera, a GPS and in-built games, but now its hard to imagine life without one.

Just as smartphones cover off the traditional functionality of making phone calls, Tufflex is used for screening product in the quarry market. It offers improved screening efficiency, substantially increased wear life, increased production uptime and occupational health and safety (OHS) benefits due to its light weight and flexibility.

While there are a set range of apertures (1.5mm to 45mm square) to choose from, the Tufflex process has great flexibility in manufacturing unique aperture combinations to rope diameters and aperture slot lengths. For example, in some quarry plants in Japan, a 14 aperture screen is used as the bottom deck for their No. 5 spec (20mm to 13mm) or the top deck for the No. 6 spec. The Tufflex specification is an 8mm rope on top and a 6mm rope from hook to hook, a combination not available in traditional woven wire.

Long-slotted apertures, ie 8 x 340mm, are used in some side-tensioned equipment where flexibility of the screening surface is needed. This type of aperture, while possible to weave in wire, would not have the mechanical stability for a vibrating application, whereas Tufflex screens were developed with this in mind. These larger configurations can also be used as an alternative to harp/piano screens.


Get quotation:
TEL:+86-311-80690567
Mobile Phone: +8618103317488 Contact me with WhatsApp
Email : team91@huataogroup.com
Address:NO.298 ZHONGHUA NORTH STREET ,XINHUA DISTRICT, Shijiazhuang, China.
Zip:050000
Wechat:18103317488
Website: www.tufflexscreen.com

Functions as follow:
1. The testing machine is equipped with 100KN axial actuator, which can complete the uniaxial tensile, compression and fatigue testing of materials.
2. The machine is configurate with high temperature heating box, which can complete the fatigue testing uner 1100 .
3. Adopt of imported load cell, displacement and deform extensometer, which would control the data of testing force, confining pressure, specimens deformation automatically and precisely. Such as:
a) constant stress, constant displacement, constant deformation.
b) speed of constant stress, constant displacement, constant deformation.
c) rate control of stress, displacement, deformation.
d) loading and unloading in circulation.
4. The testing machine adopts high performance electro-hydraulic servo proportional valve set with wide speed and digital controlling with full digital closed-loop speed regulation control system, smoothly (no impact) conversion among force (stress), displacement and deformation (strain).
5. Safety protections:
a) electric system: over voltage, over current, over heating.
b) measuring and c pressure, oil temp, oil-way blocking.
d) high temp system: ultralimit of high temp
e) deformation and time pre-setting, limit of deform.
f) protection of specimens rupture
6.The software of testing is working under windows with strong data processing, automatically save, display and printing.

Standards as follow,
GB/T2611-2007 General Technical Requirements for Testing Machine
JJG 139-1999 Tension,Pressure and Universal Testing Machine
GB/T2282010 Metal Tensile Test
GB/T3075-82 Standard Test Method for Axial Fatigue of Metals
GB/T2039-80 Test Method for Tensile Creep of Metals
GB/T16826-2008 Electro-hydraulic Servo Universal Testing Machine
JB/T9397-2002 Technical Condition of Tensile and Compression Fatigue Machine
GB/T228.1-2010 and GB4338-2006-T Testing Methods of Metals

Technical spec:
1.Actuator: imported HANCHEN dynamic servo actuator in Germany.
Max static loading forceï¼?100KN
Max dynamic loading forceï¼?100KN
loading frequencyï¼?0.1Hzï½?100Hz orï¼?0.1-30HZï¼?
Speed of flexï¼?0ï½?200mm/s
Dynamic performanceï¼?loadï¼?±100kNï¼?Ã?amplitudeï¼?±0.1mmï¼?Ã?frequency(100Hz)
Accuracy of loadï¼?±0.1%FS
Accuracy of displacementï¼?±0.5%FS
2.TEMP of heating furnaceï¼?1100ï¼?accuracy : ±5
3. Testing specimens
Specimens plateï¼?0ï½?10mm
Round rod specimensï¼?dia. :0ï½?Ï?30mm
High tempï¼?connect to M20 of high temp with threaded
4.Oil source systemï¼?
Powerï¼? AC380V 50HZ about 35KW
Flowï¼?57L/Min
Pressureï¼?rated pressure: 25MPa
5.Sensorï¼?
Load cellï¼?INTERFACE1032,range is 125KN,accuracy is ±0.04%FS

Product Description
IES Ideal End Suction Pump
IES Series is single stage, single suction back pull out type
Dimensions are according to EN733 (DIN24255) standard
Flange can be drilled according to ISO, DIN, BS or ANSI standard
Shaft with mechanical seal as standard and gland packing optional
Materials available (Cast iron, Ductile iron and SS316 etc.)

Performance Range
Flow Rate (Q) Up to 1100 m3/h
Head (H) Up to 152m
Speed (RPM) 1450~2900 rpm (50HZ), 1750~3500 rpm (60HZ)
Temperature -10 Celsius to 105 Celsius, (Optional 130 Celsius)

Applications
HVAC & Cooling Tower
Fire Fighting
Chemical Liquid Transfer
Irrigation & Agriculture
Booster & Pressurization Set

Definition of Model
IES 65/20
IES - Single Stage, End Suction Pump
65 - Discharge Diameter (mm)
20 - Impeller Nominal Diameter (mm)