Please click here to check who's online and chat with them.

Find Verified Construction Chemicals Suppliers, Manufacturers and Wholesalers

Top Supplier Cities : -   Shenzhen   Shanghai  
Feb-24-05
Supplier From Beijing, China
 Inquire Now
Feb-13-09
Supplier From Beijing, China
 Inquire Now
Mar-03-09
 Inquire Now  
1. Product specialty:
5100C is urea formaldehyde resin powder as binders special for woodworking processing. It owns high bonding strength, low formaldehyde content as well as ideal water resistance. This powder is suitable for the cold pressing and hot pressing project.

2. Performance index:
Item unit description
Powder:
Appearance -- white powder
Moisture content % 1~3
Volatile substance % <2.5
Bulk density kg/m3 500~800
Molar ratio (f/u) -- 1.55
Solution ( 60% content in water)
Ph value -- 8~9
Viscosity at 25 c cps 300~550
Curing time (2% nh4cl at 25 c) hour 3~6
Curing time (2% nh4cl at 100 c) second 55~80

3. Dissolving glue powder:
A) mixture ratio:
Item ratio( pbw)
Uf powder 100
Water 50~150
(according to actual situation)

B) dissolution method:
Put less than 30pbw of the total needed water into mixer, and then add uf powder in. Switch on the mixer with speed of 50~150 rotations / minute, after glue powder being completely dissolved, put the remained water in mixer gradually along with churning. Continue to agitate for further 3~5minutes until the glue solution is completely mixed together again.
C) the user could add hardener into the mixed liquid glue according to actual requirement, and control the active period of dissolved liquid glue.

4. Storage & note
A) storage life: 1 year under temperature lower than 30 c.
B) the goods should be stored in a dry, ventilated location. Avoid direct sunshine and moisture.
C) the package should be sealed again immediately once the pack has been opened to avoid moisture.
D) avoid contact with eyes. Once splashed into eyes, flushed out with plenty of clean water. Consults doctor if necessary.



1. Multi-ply paper bag with polyethylene liner.
2. 20kg/bag.
Mar-03-09
 Inquire Now  
Application:
5200f is suitable for the processing of plywood, particle board, MDF&HDF, multi-ply wood engineer flooring, surface veneering as well as the other wood production.

1. Product specialty:
5200f is melamine modified urea formaldehyde resin powder as binders special for woodworking processing. It owns higher bonding strength, lower formaldehyde content as well as ideal water resistance. This powder is suitable for hot pressing project.

2. Performance index:
Item unit description
Powder:
Appearance -- white powder
Moisture content % 1~3
Volatile substance % <1.0
Bulk density kg/m3 600~700
Molar ratio (f/u) -- 1.55
Solution ( 60% content in water)
Ph value -- 8~9
Viscosity at 25° c cps 300~550
Curing time (2% nh4cl at 25° c) hour 3~6
Curing time (2% nh4cl at 100° c) second 55~80

3. Dissolving glue powder:
A) mixture ratio:
Item ratio( pbw)
Uf powder 100
Water 50~150
(according to actual situation)

B) dissolution method:
Put less than 30pbw of the total needed water into mixer, and then add uf powder in. Switch on the mixer with speed of 50~150 rotations / minute, after glue powder being completely dissolved, put the remained water in mixer gradually along with churning. Continue to agitate for further 3~5minutes until the glue solution is completely mixed together again.

C) the user could add hardener into the mixed liquid glue according to actual requirement, and control the active period of dissolved liquid glue.

4. Storage & note:
A) Storage life: 1 year under temperature lower than 30 c.
B) the goods should be stored in a dry, ventilated location. Avoid direct sunshine and moisture.
C) the package should be sealed again immediately once the pack has been opened to avoid moisture.
D) avoid contact with eyes. Once splashed into eyes, flushed out with plenty of clean water.





1. Multi-ply paper bag with polyethylene liner.
2.20kg/bag.
Jan-05-10
 Inquire Now  
Uses
SM-P is recommended strongly for use in all ready-mix, precast, and prestress concrete applications where low water-cement ratio, low permeability, high durability, high strength concrete is specified or high slump flowable concrete is required.
SM-P can be applied in various concrete, including high strength concrete, high fluidity concrete, high duration concrete, aluminate cement refractory concrete, grouting material, steam curing concrete, high strength mortar, gypsum products, and so on.
Advantages
Increase concrete early strength.
Promote workability.
Increase flowability.
Increase cohesiveness and segregation resistance.
Shorten mold take-off time.
Keep water/cement to a minimum.
Promote air stability.
Compatible with cements, gypsums and other admixtures.
Reduce bleeding at high slumps.


Woven fabric bag with plastic liner. Net weight: 20kg +/- 0.13 kg
It is easy to absorb moisture from air. So it must be kept in original sealed bag and stored at dry condition. The shelf life is one year.
This product is non-toxic and non-flammable. So there is no special transportation requirement.
39 Construction Chemicals Suppliers
Short on time? Let Construction Chemicals sellers contact you.
Jul-10-18
Supplier From Beijing, China
 Inquire Now
Jan-13-06
Supplier From Beijing, Beijing, China
 Inquire Now
Dec-28-09
Supplier From Beijing, China
 Inquire Now
Aug-30-22

Csa Expansive Agent

$200 - $230
MOQ: Not Specified
 Inquire Now  
High-efficiency csa expansive agent is obtained by blending suitable natural anhydrite with a specially manufactured clinker which consists essentially of calcium sulphoaluminate and CaO. Csa expansive agent is always mixed with ordinary cement. When mixed in the proper proportions with ordinary cement and hydrated, cement mortar or concrete expands during the early stages of hydration.
Apr-11-09
 Inquire Now  
Application:
Tiones tm 6041a can be used in a variety of applications in building industry. Its typical application field is high flexible polymer-modified dry mixtures based on mineral binders such as cement, lime or gypsum. The highly recommended applications are:
Waterproof mortars
Waterproof wall putty (skim coat)
Concrete repair mortars
Tile grout
Non-shrinking grouting material
Powder paint

1. Product description:
Tiones tm 6041a is a water-soluble redispersible polymer powder based on copolymer of pure acrylate. It's free of any solvents.

2. Specification:
Appearance---------------------------------------- white free-flowing powder
Protective colloid----------------------------------polyvinyl alcohol
Bulk density-----------------------------------------500 ± 100 g/l
Particle size-----------------------------------------max. 5% over 150μ m
Residue moisture----------------------------------≤ 2%
Ph value---------------------------------------------7.0 ± 1.0 (50% dispersion in water)
Film properties------------------------------------opaque, high flexible
Mfft------------------------------------------------approx. 0° c
Tg ---------------------------------------------------(-5° c)

3. Properties:
Tiones tm 6041a is high flexible with very low tg range. It provides pre-mixed mortar with the following advantages:
Outstanding water resistance
Improves flexibility
Improves workability
Excellent weatherability and durability
Prominent heat resistance
Reduces elastic modulus

4. Dosage and handling:
Tiones tm 6041a is added to other powdery components to obtain the mixed homogenous formulation. The dosage should be more than 1.5% of dry material depending on actual application and desired performance. Final required dosage should be evaluated by testing prior to actual application.





20 kg/bag: valved multi-layer paper bag with polyethylene interlayer.
Apr-11-09
 Inquire Now  
Application:
The typical application field of tiones tm 6012e is polymer-modified dry mixtures based on mineral binders such as cement, lime or gypsum. The highly recommended applications are as follows
Plaster mortar
Skim coat
Grout mortars
Gypsum plaster.

1.Product description
Tiones tm 6012e is a water-soluble redispersible polymer powder based on copolymer of vinyl acetate and ethylene. It's free of any solvents.

2.Specifications
Appearance: white free-flowing powder
Protective colloid: polyvinyl alcohol
Bulk density: 500 ± 100 g/l
Particle size: max. 10% over 150
Residue moisture: ≤ 2%
Ph value: 7.0 ± 1.0 (50% dispersion in water)
Film properties: opaque, flexible
Mfft: approx. 0°c
Tg : (+6°c)

3.Properties
Tiones tm 6012e increases cohesion of binding material and improves performances of
Cement based products. It provides pre-mixed mortars with following advantages:
Improves workability
Improves adhesion strength
Improves flexural strength

4. Dosage and handling
Tiones tm 6012e is added to other powdery components to obtain the mixed homogenous formulation. The dosage should be more than 1.5% of the total dry mixture by weight. The final required dosage should be evaluated in suitable tests prior to the actual application.

5.Storage
Tiones tm 6012e should be stored in a cool, dry place. To prevent moisture penetration, the opened bags should be sealed again as soon as possible. On account of thermoplasticity of the redispersible polymer powder, bags must not be stacked higher than one pallet. Tiones tm 6012e storage time should not exceed 6 month.




20kg/bag.
Mar-03-09
 Inquire Now  
Application
The typical application field of tiones tm 6021e is polymer-modified dry mixtures based on mineral binders such as cement, lime or gypsum. The highly recommended applications are as follows:
Eifs adhesive mortar, plaster mortar & anti-cracking mortar
Cement-based tile adhesive
Tile grouts
Grout mortars
Repair mortar
Gypsum plaster

1. Product description:
Tiones tm 6021e is a water-soluble redispersible polymer powder based on copolymer of vinyl acetate and ethylene. It's free of any solvents.

2. Specifications:
Appearance---------------------------------------- white free-flowing powder
Protective colloid----------------------------------polyvinyl alcohol
Bulk density-----------------------------------------500 ± 100 g/l
Particle size-----------------------------------------max. 10% over 150μ m
Residue moisture----------------------------------≤ 2%
Ph value----------------------------------------------7.0 ± 1.0 (50% dispersion in water)
Film properties-------------------------------------opaque, high flexible
Mfft-------------------------------------------------approx. 0° c
Tg ----------------------------------------------------(+7° c)

3. Properties:
Tiones tm 6021e increases cohesion of binding material and improves performances of cement based products. It provides pre-mixed mortars with following advantages:
Improves adhesion strength substantially
Improves workability
Improves crack resistance
Improves flexural strength
Reduces elastic modulus

4. Dosage and handling:
Tiones tm 6021e is added to other powdery components to obtain the mixed homogenous formulation. The dosage should be more than 1.5% of the total dry mixture by weight. The final required dosage should be evaluated in suitable tests prior to the actual application.




20kg/bag: valved multi-layer paper bag with polyethylene interlayer.
Aug-30-22

Rapid Hardening Cement 42.5 Csa Cement

$200 - $230
MOQ: Not Specified
Supplier From Beijing, , China
 Inquire Now  
The product obtained by grinding cement clinker obtained by roasting suitable raw material, consisting essentially of anhydrous calcium sulphoaluminate and dicalcium silicate. Suitable gypsum and 0-10% limestone shall be blended with clinker during manufaturer of rapid-hardening sulphoaluminate cement. The rapid-hardening cement product is hydraulicity binding material. It has high early strength. The code no is R-SAC and with four grades.
Apr-14-15
Supplier From Beijing, China
 Inquire Now
Feb-06-09
Supplier From Beijing, China
 Inquire Now
Jun-19-25
Supplier From Beijing, China
 Inquire Now
May-25-16
Supplier From Beijing, China
 Inquire Now
Aug-04-21
Supplier From Beijing, China
 Inquire Now
Dec-01-10
Supplier From Beijing, China
 Inquire Now
Aug-19-08
Supplier From Beijing, China
 Inquire Now
Sep-29-19
Supplier From Beijing, Beijing, China
 Inquire Now
May-31-12
Supplier From Beijing, China
 Inquire Now
May-07-11
Supplier From Beijing, China
 Inquire Now
Dec-16-08
Supplier From Beijing, Haidian District, China
 Inquire Now
Feb-23-16
Supplier From Beijing, China
 Inquire Now
Jun-25-10
Supplier From Beijing, China
 Inquire Now
Aug-03-16
Supplier From Beijing, Tongzhou, China
 Inquire Now
Apr-25-20
Supplier From Beijing, , China
 Inquire Now
Aug-12-16
Supplier From Beijing, China
 Inquire Now
Oct-13-18
Supplier From Beijing, China
 Inquire Now
Jun-02-16
 Inquire Now  
1) Composition: (50-80)%woodpulp+(50-20)%PP
2) Weight: 110gsm
3) Color: White, Blue, Red
4) Application: Application:
• Heavy-duty machine & part wiping
• Wiping metal shavings
• Prepping surfaces with solvents
• Cleaning rough surfaces
• Cleaning surfaces & tools
• Heavy-maintenance wiping




-
Jun-02-16
 Inquire Now  
Blanket Wash Cloth for automatic press cleaning systems, manufacturered by Beijing Soonercleaning Technology Co., Ltd.
We can produce blanket wash cloth jumbo rolls-500meters in length, made in standard widths to suit press model. Available for presses: Heidelberg, Man Roland, KBA, Planeta, Komori……
Also can be used as mini/cassette rolls for popular press like Heidelberg and Komori, ranging from 6,8,11 meter length, 12-25rolls per box.
Features:
1) Superior absorbency;
2) Low linting
3) Removal inks and solvents from the blanket quickly and completely
4) Incredibly strong wet strength
5) Cutting downtime, meanwhile, optimize product effectiveness and product quality




-
Aug-22-16
Supplier From Beijing, China
 Inquire Now
Mar-19-13
 Inquire Now  
Description
Naphthalene Sulfonate (FDN) concrete admixture is a high range water reducer, high concentrate naphthalene-based superplasticizer, also named Naphthalene Sulfonate Formaldehyde Condensate (NSF), SNF, PNS, etc..

Naphthalene Sulfonate (FDN) concrete admixture is made of naphthalene, sulfonic acid, formalin and alkali through sulphuration, hydrolyzation, condensation and neutralization reaction. Naphthalene Sulfonate (FDN) concrete admixture contains no chloride. It conforms to the requirements of chemical admixture specifications for concrete: ASTM C 494, Type F; ASTM C 1017.
Application
1.Naphthalene Sulfonate (FDN) concrete admixture is suitable to make autotrophic concrete, steam curing concrete, steel concrete and prestress concrete, all of which are made mainly of portland cement. When concrete added this superplasticizer needs to be steam cured, it requires considerable structural strength. The curing requirements should be pre-tested.
2.Naphthalene Sulfonate (FDN) concrete admixture is applicable in areas with the daily lowest temperature of and for making concrete which requires high fluidity, high strength or steam curing.
3.Naphthalene Sulfonate (FDN) concrete admixture can be used to make C80 concrete with slump loss between 50mm and 70mm, or C60 concrete with that between 180mm and 220mm.
4. Naphthalene Sulfonate (FDN) concrete admixture could be used as a raw material together with other components to make other kinds of admixtures, such as accelerator, retarder, anti-freezing agent and pumping aid to satisfy requirements from different construction projects, techniques, materials and environmental temperatures.
5. Naphthalene Sulfonate (FDN) concrete admixture will also fluidize concrete, making it ideal for tremie concreting or other applications where high slumps are desired.
6. Naphthalene Sulfonate (FDN) concrete admixture is compatible with Portland Cement, Portland Slag Cement, Fly-ash Cement, Portland Pozzolanic Cement, etc.

Features and Benefits
1. High water-reducing rate: Naphthalene Sulfonate (FDN) concrete admixture has a water reducing rate of more than 25%. It effectively increases concrete fluidity and reduces water bleeding and cement segregation. Therefore, it improves concrete placement and makes concrete easy to use and compacting.
2. Strengthening ability: Given the same amount of cement and slump requirement, this product can increase the concrete strength by 50-110%, 40-90%, 40-70% and 20-40% on day 1, 3, 7, and 28 respectively.
3. Good compatibility: It can be used with various types of cement. It is compatible with other admixtures. It may be used with expanding agents, air entraining agents as well as fly ash for supplementary and catalytic purpose.
4. Appropriate setting time: It doesn't influence the initial and final setting time. The difference in setting time generally is less than 1 hour.
5. Low sodium sulfate content: The aqueous solution has no crystallization in winter, which can avoid pipeline congestions.
6. Safety: It's non-toxic, non-irritating and non-emissive. It has no corrosion to steel bars. It's also hard to burn and explode.
7. High durability: It can modify the pore structure of concrete and improve impermeability, anti-freezing and thawing ability and carbonization.
8. Easy to use: It can be added directly or after being dissolved in water. It can be used for different working conditions and concrete mixers.
Uses and Dosages
1. Naphthalene Sulfonate (FDN) concrete admixture can be added directly or added in after being dissolved. It can be added during mixing and after-mixing.
2. The afterward approach can achieve better result. Naphthalene Sulfonate (FDN) concrete admixture is addition rate ranges from 0.4% to 1.0% of the weight of cementitious material in 1m3 of concrete, while the suggested rate is 0.5%.
3. If Naphthalene Sulfonate (FDN) concrete admixture is used in powder form, add it directly into cement, but not onto wet sand and gravels. If solution is used, please fully stir and dissolve it completely.

Package, Storage & Handling
1. Naphthalene Sulfonate (FDN) concrete admixture for powder: Woven fabric bag with plastic liner. Net weight: 25kg +/- 0.13 kg.
2. When being handled or stored, special care should be taken to broken package, humidity and moisture to avoid consolidating. If it's consolidated, please dry, shatter, then sift it through 0.63mm apertures or make solution before using.
3. Naphthalene Sulfonate (FDN) concrete admixture should be stored in a dedicated warehouse that is well-ventilated and dry. It's shelter life is 12months.
4. Since Naphthalene Sulfonate (FDN) concrete admixture is packed in woven plastic bags, though the product is nonflammable, cautions should be taken to avoid fire.


25kg/bag, 16 tons loaded in a 20ft.
Feb-21-21
Supplier From Beijing, China
 Inquire Now
Aug-24-24
Supplier From Beijing, China
 Inquire Now
Aug-03-22
Supplier From Beijing, Haidian, China
 Inquire Now
Mar-10-08
Supplier From Beijing, China
 Inquire Now
Sep-19-08

Geogrid

MOQ: Not Specified
Supplier From Beijing, Haidian, China
 Inquire Now  
BR Uniaxial Geogrids are meshes with elongated apertures made from high density polyethylene (HDPE) and generally used as reinforcement of walls and slopes. Their principle characteristic is good creep performance with low strain and high strength under constant load
Properties
Polymer: High Density Polyethlene:
Polymers and master-batch for the production of Geogrids have been strictly tested and selected and performance confirmed in the company's Research and Development Laboratories. Production is tested and quality controlled in strict accordance with international standards and stable properties are guaranteed.
Resistance to Ultra-violet light:
A high level of resistance to U-V light is given to geogrid Products by the incorporation of not less than 2% of weathering-grade carbon black, well dispersed in the polymer matrix. These products may be used for many years in exposed conditions.
Chemical and Biological Resistance:
Uni-axial Geogrids are manufactured from High Density Polyethylene which is unaffected by all chemicals, including acids, alkalis and salts, normally found in soils. Also, it is not a nutrient, therefore these products are not affected by micro-organisms in soil.
Creep Performance:
A good creep performance under sustained loading is essential for the use of geogrids in critical structures such as walls, abutments and steep embankments. we maintains constant Creep testing programmes in its laboratories and works closely with National and International experts in the performance of geogrids to ensure that its products meet the strictest demands in all markets.



bulk
39 Construction Chemicals Suppliers
Short on time? Let Construction Chemicals sellers contact you.
  • First page
  • Next
See what buyers and suppliers are discussing in Construction Chemicals import export community