Find Verified Ceramic Cartridge Suppliers, Manufacturers and Wholesalers

Material - Aluminum Die-casting
Coating - Eco-friendly Ceramic coating (In/Out)
Design- Bottom - Tornado design
- Side - Layer wave design
Handle- Ergonomic design, Protecting wrists, Bakelite
Lid- Aluminum forged Lid or Tempered glass Lid
Thickness- Bottom 4.0mm
- Body 2.0mm
- Lid - 3.0mm
Size- One handle 18cm
- Pot - 20cm, 24cm
- Low Pot 24cm
- Deep Pot - 28cm
Function- Strong endurance on scratch, abrasion and corrosion
- Strong coating, Superior antibiosis

Only defects that cannot be refurbished are defects on the puck, like, cracks and fractures of ceramic parts. There are heat wires inside the ceramic puck and if the puck is broken, it is very probable that heat wires are damaged, which cannot be repaired.

The Ceramic Heater is ideal for spot heating or area heating of remote locations, farm buildings, shops, service areas, pump houses or other hard-to-heat spaces, providing both fuel efficiency of radiant heat and installation flexibility not recommended for car washes.

This is a Millivolt Standing Pilot heater and does not require an external power or electricity to operate, so it's great for use during power outages. Requires Millivolt thermostat for SGM sold separately. May require the following second stage regulators prior to the heater based on gas supply pressure

Ceramic Antibacterial Frying Pans

Environment-friendly interior and exterior Titanium Ceramics Coating
Natural minerals Ceramic 6-layered coating makes it possible to cook healthy because no environmental hormones such as PFOA that can occur during cooking are detected.


1. Antibacterial 99.99%
Titanium ceramic coating with antibacterial 99.99% by inhibiting the growth of bacteria.

2. Far-infrared radiation
Compared to PTFE beneficial far-infrared radiation to the human body

3. Good hardness(9H)
Because of its high surface hardness, it is resistant to scratches and abrasion and can be used for a long time

4. Heavy premium castiron frying pan
Heavy-duty casting body and lid increase the pressure of water vapor, shortening the cooking time and improving taste and flavor

5. Rubber coating handle
Rubber coating on frying pan handle maximizes ergonomic grip

Material- Aluminum Die-casting
Coating- Ceramic coating (In/Out)
Handle- Bakelite
Lid- Glass Lid
Thickness- Body - 2.5mm
- Bottom - 5.5mm
Size- One handle - 18cm
- Pot - 20cm, 24cm, 28cm
- Low Pot - 24cm
Function- Eco-friendly
- 100% PTFE & PFOA Free
- S line shape of body.
- Standing type overflow protection Glass Lid

There has been a limitation that existing ceramic ball production type is difficult to apply on proliferation production type for Nuclear Fusion Reactor using lithium titanium oxide because there is a restriction on ball size and impurities generation and so on. lithium titanium oxide (Li2TiO3) is used as a tritium proliferation for Nuclear Fusion Reactor. We developed the production system possible to mass produce more than 50 kg yearly.

Ceramic heater are widely used in pre-heating of plastic sheets for vacuum forming & thermoforming, drying paints, lacquer & varnish curing, drying printing inks, drying textiles, activating adhesives, removing surface water from objects or moisture removal from fabric and paper, animal husbandry and rearing.The ceramic IR heaters are highly efficient.Ceramic infrared heater offers precise targeting and control with minimal peripheral heat. It is possible to apply heat only where and when it is required.

High performance high pressure Sprayer does a to and fro motion 900 times in a minute.
It has to eb added oil and greek to prevent the heat.
non-greek ceramic sprayer blocks the impurities mixed with the original one.

"TUCHE Titanium Ceramic Gold/Siver Mug Cup
Briefly we call TT [TUCHE Titanium] cup"

Product Description :
"Standard cup size and luxury gold, silver color
High technically Titanium coating technique of low temperature
Plasma process and not easy working of transferring paper attachement for pattern
It's just made in korea and hand made high quality Mug Cup"

Price of product ( USD price or FOB price) :
"FOB price for 1 cup [Golg or Silver]: USD 15.0
FOB price for 2 cup [1 set]: Gold+Silver: USD 32.0

Product origin :
Made in Republic of KOREA

Key Specifications/Special Features :
"Material: Ceramics made in south korea
Titanium coating process: Eco-friendly plasma coating
Mug cup pattern: very special design
Pattern and Color: As buyer requires, Cup size can be changed
Color: Gold and Silver / White, red black available
Weight diffrence: 10~20g
Defectives ratio: under 1~2%
Certification: KCL and As buyer Require we can test
Place of Origin : Republic of KOREA
Port Of Loading : Busan port by vessel
Payment Term: T/T in advance
Delivery Time: After confirmation orders. 5~6 week "

Minimum Order Size and Packaging details :
"Minimum Order Quantity: 6,000 pcs/color
box packing+pallet
Packing: 1 pcs or 2pcs(1set) avaiable"

IR Ceramic series uses high-purity ceramic films for strong, stable, non-metallic and non-chromatic eco-friendly film. It has the lowest reflectivity and natural color to give a clear and clean view, while also having up to 92% train unity, which is the lowest reflectivity of the conventional metal reflective film concept. In addition, unlike other metal films, oxidation does not occur, and there is little intermolecular bond destruction by ultraviolet light, enabling semi-permanent use.

Features and Benefits 92% heat blocking with ceramic materials.
Condensation Prevention
Maintain optimal view with low reflectivity.
Luxurious appearance production in natural colors
99.9% UV rejection

Chopped Strand Mat
Fiberglass Chopped Strand Mats are non-woven fabrics consisting of randomly distributed chopped strands held together with a powder or emulsion binder.
Chopped Strand Mat is compatible with unsaturated polyester, vinyl ester, epoxy and phenolic resins. The products are most widely used in hand lay-up process and can also be used in filament winding, Compression molding and continuous laminating processes. The typical end-use applications include various panels, boats, FRP roof shoot, Autonitive parts, bathroom equipment and cooling towers.

Product Features

1.Uniform density ensures consistent fiberglass content and mechanical properties of the composites products.
2.Uniform powder distribution ensures good mat integrity, little loose fibers and small roll diameter.
3.Excellent flexibility ensures good moldability with no spring-back at sharp corners.
4.Fast and consistent wet-out speed resins and rapid air release reduce resin consumption, improving manufacturing costs, productivity and mechanical properties of the end products.
5.The composite products have high dry and wet tensile strength and good transparency.

General Data

Binding type : Powder or Emulsion;
Densily : 85-900g/m2;
Width : Max.3300mm, Tapes available.
Edge : 1 or 2 untrimmed edge available upon request.

Surfacing Tissue

Surfacing Tissue mainly used in the surface layers of FRP products. It features even Fiber distribution, soft feel, level and smooth fiber surface, less glue content, quick resin soak and good pattern fitness. It can improve the product surface property on corrosion resistance, compressive strength, seepage resistance, and longer service life. It is also suitable for spraying; pattern pressing and other FRP pattern technology.

Packaging

Product is manufacture in form of a roll wrap on a paper tube then after packed in a plastic bag and placed with in a cardboard carton. Rolls can be loaded in a container directly or on pallets.

Stroge

Should be stored in dry, cool, clean and rain-proof area. Recommended temperature range of storage is between 10~30 and relative humidity between 50%~75%.

3-D spacer fabric construction is a newly developed concept . The fabric surfaces are strongly connected to each other bv the vertical pile fibers which are interwoven with the skins . Therefore, lhe 3-D spacer fabric can provide good skin-core debonding resistance, excellent durability and superior integrity. In addition, the interstitial space of the construction can be filled up wilh foams to provide synergistic support with vertical piles. These products have broad application prospects in automobile, Iocomotive, aerospace, marine, windmills, building and other industries.

Product Characteristics
The 3-D spacer fabric consists of two bi-directional woven fabric surfaces, which are mechanically connected with vertical woven piles. And two S-shaped piles combine to form a pillar, 8-shaped in the warp direction and 1-shaped in the weft direction.
The 3-D spacer fabric can be made of glass fiber, carbon fiber or basalt fiber. Also their hybrid fabrics can be produced.
The range of the pillar height:3-50 mm, the range of the width:3000 mm.
The designs of structure parameters including the areal density, the height and distribution density of the pillars are flexible.
The 3-D spacer fabric composites can provide high skin-core debonding resistance and impact resistance and impact resistance, light weight. high stiffness, excellent thermal insulation, acoustic damping, and so on.

Carbon fiber modification on engine hood,empennage, surrounding surface, car handle, rotary plate, ect,. is the desire of car fans. Car fans are bothered by this problem any more after the carbon fiber vinyl come out as its price is lower and easy to operate

Model : K9291, K9292, K9293, K9296, K9297

Material
Size : 127cm × 50M
Fabric : 0.09mm
Glue : 30µ
paper : 140g.

Material :
- 304 Stainless Steel
- Magnetic Induction bottom

Origin : Korea

Thickness
- Body - 2.3T
- Cover - 1.0T

Size :
- Saucepan :16cm
- Pot - 18cm, 20cm
- Steam Pot (with steamer) : 24cm
- Casserole - 24cm

PDLC (Polymer Dispersed Liquid Crystal) film is a part of electronics that can actively adjust the penetration ratio of solar light. This is a new material that adjusts the penetration of visible rays according to the presence or absence of electricity. It can modulate 1/1000 second depending on whether authorized or not.

Product Color : Millky White, Gray

Product Type
Lamination : Using the connetion between the glass
Adhesive : Using the paste direct the glass

High penetration ratio
(OFF) 99%, (ON) 6%

Operation temperature
(not transition on 100¡É)Smart VU film is stable on high temperature

Adhesive Bonding Strength
(peel strength 130g/in)Smart VU film is excellent in durable better than competitor company by surface adhesion
strength.

Flexing
Smart VU film is stable highly once pressing or bending.

Bestroom
Product feature
Haze rate(ON) <6% Haze rate(OFF) >99%
Penetration rate(ON) >80%
Penetration rate(OFF) >0.8%
Rated voltage 60V~110V
Power consumption <5W/sqm
UVcut ratio >99%
Operation temperature -20~100
Adhesion strength 130 [ASTM D903]
Film splicing PVB Film possible

The water-proofing and rust-preventing jobs are accomplished by ink-coating the edges of mirror. The coating time is greatly reduced as compared to the edge coating of using existing IR and paraffin. Also, it is designed to improve productivity by simplifying the production process and by minimizing the defective rate.

PDLC(Polymer Dispersed Liquid Crystal) film is a part of electronics that can actively adjust the penetration ratio of solar light. This is a new material that adjusts the penetration of visible rays according to the presence or absence of electricity.

It is laminated with PDLC film from two transparent conductive coated PET. PDLC film consist of droplets of liquid crystal dispersed in a matrix prepolymer binder. The PDLC film has liquid crystal droplets with a bipolar alignment. In the absence of an electronic field the droplet director are randomly aligned and in general the refractive index of the droplet is mismatched with that of the prepolymer and the materials scatter light. In on state, the film of the PDLC can be switched to an index matched and transparent state by application of an electric field aligning the drioplet director parallel to the applied field.

Porcelain Enamel

Porcelain enamel is a form of glass bonded to metal at high temperature.

Porcelain enamel is quite simply the highest quality, most durable and sanitary finish available for metallic surfaces.
Porcelain enamel is an ancient art which has survived and been transformed in modern times into a unique protective and decorative coating for metals.

Porcelain enamel begins as a blend of raw materials smelted in much the same way as common glass. During this process (known as "fritting"), the hot, molten mixture is poured from a smelter and water-quenched and then dried.
Frit is applied to metal either a wet or dry method and fired at very high temperatures - generally ranging from 760 to 880 degrees Centigrade.

While in the furnace, the frits melting bond with the metal to create more than a coating.

TDS for display can analyze organic thin-film with glass material and it is designed to hold and load the sample according to the form.

Polarized Glasses ADG(3000,3200)

ADG 3000 Rides, Small Theatres, LCD & DLP Projectors
ADG-3200 LG TV, RealD standard
DLP Projectors
Comfortable wear doesn't slide down even on a ride
Curved design allows all ages from children to adults to wear it.

Polarized Glasses ADG (3100)

Comfortable wear doesn't slide down even on a ride
Curved design allows all ages from children to adults to wear it.

- Thermal Brush (Dia 20 ~ 80 mm)
- Inside Cap
- With section pick
- Bristle : Black Nylon Bristles (Normal Type)
- Barrel : Oliver green ceramic coating
- Handle : Dark Green

The PM5 Dental Machine is a Plasma Medical Titanium Surface Treatment Machine designed for cleaning, surface modification, and activation of titanium implant surfaces before placement in the patient's mouth.

Specifications:
Size (mm)(Width X Height X Depth) : M/C 600 x 680 x 640 Addition 600 x 760 x 640 (Total 600 x 1560 x 640)
Axis: 5-Axis
Manufacturable Material : Metal / Zirconia / PMMA / WAX / Glass Ceramic / Abutment / ETC
Spindle : 1.8 ~ 2.7 kw / 60,000 RPM Air Cooling
Endmill: Metal 0.5 / 1.0 / 1.5 / 2.0 / 3.0, Zirconia 0.3 / 0.5 / 1.0 / 2.0, Glass Ceramic 0.6 / 1.0 / 2.0, PMMA 0.5 / 1.0 / 2.0
Inside System : Coolant + Air Suction
Jig & Material : Disk Cr-Co, Ni Co, Soft Metal, Glass Ceramic, Zirconia, Wax, PMMA, etc, Cube Glass Ceramic, Abutment Titanium

Air Max Smoke Evacuator is suggesting a good alternative for smoke, microdust, and even offensive odor control, which is an unavoidable by-products in laser treatment. With a triple filter system, AirMax enables to eliminate not only smoke and micro dust itself, but also offensive odors too, which general smoke evacuators cannot so far. AirMax also adopts a flexable and self-stainable hose, and it provides an user friendly environment, cause no assistant needed.

System Advantages
Triple Filter system shows the highest collection efficacy for micro dust and offensive odor
Flexible, but self-sustainable hose, doesnot need an assistant
Adopts powerful Air motor with 3/4 hp
Adjustable intensity of air flow and adopts hose strainer

Integrated Tripple Filter System
*3 IN 1 SYSTEM : PREFILTER + CARBON FILTER + HEPA FILTER
1. Pre-filter for Fine Dust Elimination : Dust Weight Arrange Efficacy 70~85% by ASHRAE 52-1
2. Carbon Filer for Offensive Odor Treatment : Collection Efficacy 80% Up
3. Hepa Filter for Micro Dust Elimination : 0.3micro Meter below dust/ Over 99.99% (Leak Test) . Over 99.97% (STD)

A dental machine PM5 used in the field of dentistry to perform a variety of tasks related to patient care, treatment, and diagnostics. These machines are essential in modern dental practices, providing precision, efficiency, and safety in various procedures.

Specifications:
Size (mm)(Width X Height X Depth) : M/C 600 x 680 x 640 Addition 600 x 760 x 640 (Total 600 x 1560 x 640)
Axis: 5-Axis
Manufacturable Material : Metal / Zirconia / PMMA / WAX / Glass Ceramic / Abutment / ETC
Spindle : 1.8 ~ 2.7 kw / 60,000 RPM Air Cooling
Accuracy: ± 1
Endmill: Metal 0.5 / 1.0 / 1.5 / 2.0 / 3.0, Zirconia 0.3 / 0.5 / 1.0 / 2.0, Glass Ceramic 0.6 / 1.0 / 2.0, PMMA 0.5 / 1.0 / 2.0
Inside System : Coolant + Air Suction
Jig & Material : Disk Cr-Co, Ni Co, Soft Metal, Glass Ceramic, Zirconia, Wax, PMMA, etc, Cube Glass Ceramic, Abutment Titanium

Fiberglass Fabrics, Fiberglass Cloth

bestView 3D glasses are polarized stereoscopic glasses, highly optimized for passive¡± projection with 3D systems using polarized light, such as Real D. This lens is specially hared-coated so that is very strong to scratch and washable to ultrasonic wave cleaning with superior image quality.

In addition, special frame with hanger makes audience who have eyewear more comfortable.

Product Description
- Applicable for insulating tape, sleeving and fabric
- Silane sizing or Paraffin sizing

Characteristics
- Consistent Linear Density
- Good Sizing Protection and Low Fuzz
- High Filament Tensile Strength

Storage
This Product should be stored in dry, cool, clean and rain-proof area. Recommended temperature range of storage is between 10-30 and relative humidity between 50%-70%.

Features

1. Remove 99.9% of chlorine and chloramines from tap water by using vitamin C filter
2. The finest quality food-grade vitamin C filter cartridge with see-through housing
3. Filter life is up to 3,000gallons (10,000litters)
4. Easy to install and use
5. Uses 6 patented technologies
6. Water savings up to 50%
7. Proven results

Features
1. Remove 99.9% of chlorine and chloramines from tap water by using vitamin C filter
2. The finest quality food-grade vitamin C filter cartridge with see-through housing
3. Filter life is up to 3,000gallons (10,000litters)
4. Easy to install and use
5. Uses 6 patented technologies
6. Water savings up to 50%
7. Proven results

Features
1. Remove 99.9% of chlorine and chloramines from tap water by using vitamin C filter
2. The finest quality food-grade vitamin C filter cartridge with see-through housing
3. Filter life is up to 3,000gallons (10,000litters)
4. Easy to install and use
5. Uses 6 patented technologies
6. Water savings up to 50%
7. Proven results

Features
1. Remove 99.9% of chlorine and chloramines from tap water by using vitamin C filter
2. The finest quality food-grade vitamin C filter cartridge with see-through housing
3. Filter life is up to 3,000gallons (10,000litters)
4. Easy to install and use
5. Uses 6 patented technologies
6. Water savings up to 50%
7. Proven results

Product Description
iCHROMA II - Boditech ( Analyzer for COVID-19 Ab test kit)

Price of product ( USD price or FOB price) :
USD1650/set
FOB Korea

Product origin :
Republic Of Korea

HS code
3822.00.1020

Key Specifications/Special Features :
* Reliable diagnosis of patients on-the-spot
* 2 level calibration: Boditech calibrators and controls
* High sensitivity antibody IgM.IgG time resolved fluorescence test
* High speed and high sensitivity antibody test
* 3 simple steps: 1) Get fingertip blood(C-tip) 2)Place the C-tip in the cartridge tip hole & run the test 3) Press START to run the test ==> Result (within 10 mins)
* Data storage and update: Store large amount of test results. Data back-up and OS update using SD card.

Minimum Order Size and Packaging details :
* MOQ: 1 sets

* Packing: 25 cartridges, 1 buffer solution, 7 tubes for free reaction in single pouch package

Deep pleat construction
Glass fiber media pack with Al separator
Operating temperature 150,250 and 350â??
Using ceramic and silicone sealant
EN1822 H12 grade / MPPS 99.97%

100% UV400 perfect blocking
90% heat cut rate

- KTPC NCâ?¡(Platium Black / White)
film for the top 1% manufactured by the sputtering method and completes your precious vehicle.
â??Train 99%, UV UA-A 100% perfect. This is the best signature premium film that boasts the best visibility.
- KTPC 9
A film manufactured by the Carbon Nano Ceramic method, 100% protection from exposure to UV rays (UV-A, UV-B, UV-C) of the eyes and skin and 90% heat blocking for a comfortable indoor environment no see.
- KTPC 8
A film manufactured by the Carbon Nano Ceramic method, 100% protection from exposure to UV rays (UV-A, UV-B, UV-C) of the eyes and skin, and a premium UV protection film with 80% heat blocking for a comfortable indoor environment is.

- KTPC 7
A film manufactured with Carbon Nano Ceramic method, it is a premium-grade UV protection film that 100% protects the eyes and skin from exposure to UV rays (UV-A, UV-B, UV-C) and blocks 70% of heat for a comfortable indoor environment. .

- KTPC 6
A film manufactured by the Carbon Nano Ceramic method that protects the eyes and skin from UV rays.
(UV-A, UV-B, UV-C) It is a premium-grade UV protection film that protects 100% of exposure and blocks heat for a comfortable indoor environment by 60%.

It is a film manufactured by KTPC Pro (ECONOMY) Carbon coating method.

- KTPC NCâ? 
It is a reflective film manufactured by the puttering method, which protects the eyes and skin from exposure to UV rays, and is a premium UV protection film with 80% heat blocking for a comfortable indoor environment.

- KTPC J 7090
A film manufactured with Carbon Nano Ceramic method, it is a premium-grade UV protection film that 100% protects the eyes and skin from exposure to UV rays (UV-A, UV-B, UV-C) and blocks 90% of heat for a comfortable indoor environment. .

- KTPC L 8080
A film manufactured with the nano ceramic method, 100% protection from exposure to UV rays (UV-B, UV-C) of the eyes and skin, and a premium UV protection film with 80% heat blocking for a comfortable indoor environment
no see.

- KTPC-ONE
A film manufactured with the nano-ceramic method, 100% protection against exposure of the eyes and skin to UV rays (UV-B, UV-C) and 90% heat blocking for a comfortable indoor environment

- For detailed product specifications, please contact us by e-mail or contact us, and we will send you a product introduction.

Applicable Plant
1. Thermal power plant equipments
2. Cement equipments

Application
- Dust coal
- Chip
- Cement

Rating
150# (10K)

Temperature
- 100 ~ 500

'Only 3-step procedure! Immuno-Chemistry System'

1. Feature & Benefit
A. Easy to Use & Fast & Compact size
- Multi-test parameters with small sample volume
- Up to 4 catridges in 13 minutes
- Hand-carry size

B. Maintenace free & No sample Pretreatment
- Built-in thermal printer and semi-permanent
- All in one reagent cartridges

C. Usability & Reliable result
- Fingertip capillary blood sample and stepwise reaction
- Built-in centrifuge to minimize hematocit interference
- More accurate and reliable

We claims the topical use of vitamin C works as an anti-oxidant for the skin and makes hair, shinier and softner.

Our shower system is a very effective product for the sensitive skin and makes hair shinier, softner.

Easier and more clearly eliminate germs and odors. It is a sterilizing, deodorizing spray for a healthy indoor environment. Because of fine particles and long dispensing distances, it effectively takes care of large spaces in small amounts.

It is convenient to use and charge. It's a stand-type dedicated crate that can be easily used for charging. You can use it continuously for 30 minutes with a charge of 2 hours and 30 minutes. It is easy to use in residential areas, houses, offices, drains, toilets, cars, buses, sports facilities, and accommodations.

Cartridge type allows you to change sanitizing liquid for each purpose and safely and conveniently use and manage them.

Physical therapy

Products for physical therapy. Ceramic suction cups good for physical therapy and physical therapy, the effect of using the pad has posted. Overcurrent in physical therapy and physical therapy to block the hold function to feature prominently in the stable is effective. Comprises a variety of products for physical therapy products for physical therapy.

Ultra-precision machining process, grinding refers to more than glossy finish and Romans in the plane of the Federated increasing grinding machine for machining is useful.

Features:
Water Seal, mechanical seal, ceramic, solar substrate, a semiconductor wafer, Mobile Phone tempered glass, TFT-LCD panels are used in many areas including:

A dental machine CRAFT 5X used in the field of dentistry to perform a variety of tasks related to patient care, treatment, and diagnostics. These machines are essential in modern dental practices, providing precision, efficiency, and safety in various procedures.

Specifications
- Size(mm)- Machines : 440 mm x 660 mm x 710 mm (WXDXH), Table : 436 mm x 660 mm x 1000 mm (WxDXH)
- Weight - Machines: 75 kg, Table: 70 kg
- Spindle- Manufacturer: J ger, Shank: 4, Maximum RPM: 100,000 rpm, maximum output: 0.7 kw
- Toolport Count: 15
- Simultaneous machining quantity:10
- Reverse Processing Quantity: 6
- electric power: 1.5kw
- JIG & Material: Zirconia, Wax, PMMA, PEEK, Composite resin, Hybrid ceramic, Glass ceramic, Pre-milled titanium abutment

AMAT MCA E-chuck Heater PVD process parts
warranty : 3 months
condition : Used like OEM-New (All refurbished)

P/N 0010-01288


AMAT MCA E-chuck Heater PVD process parts

Magnet Assy is located behind target, activated electronic motion in the plasma that improved efficiency by improving the uniformity of the deposition. Cathode role of the target material (Ti, Al, W, Ta, Cu, etc.) to be deposited on a substrate, pulls the Arion in plasma.

- Magnet assemblies are made up of steel parts and a ceramic magnet, bonded together with epoxy.

- Max pull is tested on a ½� thick and flat machined steel plate. But the actual pull should be much smaller if your steel is thinner, rough, rusty, coated or not very flat. For any critical applications, three-time safety factor is strongly recommended.

- Besides standard models listed bellow, we can make assemblies based on custom designs.

- Applications include magnetic holding, lifting, antenna mounting, positioning, retrieving and more.

MCA ESC is a key consumable part of the PVD equipment used in the deposition process in the semiconductor manufacturing process that should be replaced regularly due to high temperature/ high pressure conditions and quality problems because of impurities in the chamber.

We have an extensive stock of surplus parts and 2nd source parts, largely for AMAT, Centura, Endura, HDP Ultima Plus, Novellus, LAM, Mattson, TEL Parts, IMP Parts, etc.

This stock changes regularly as we gain excess items from our many equipment refurbishment projects.

In case of all Mca e-chuck, Mca heater, ESC, ALN Heater, Magnet Assy, products used in PVD manufacturing process, we offer a various services of refurbishment that are conducted by our own engineers and in-house. Or if customers ask, we provide new one.