Find Verified Cement Paint Suppliers, Manufacturers and Wholesalers

Both are for exterior and interior use and can be applied directly on new masonry surfaces. It is available in different attractive shades with bright finish

For price, specification and other details please contact us

Supplying high quality cement with international standards

available options:
bagged cement (50 kg): 8$
bagged cement (25 kg): 6$
bulk cement: 65$ to 75$

customizations:
we can offer your order with your logo, design ads color for bags and your brand name

Bulk or bagged
Product from Turkey or worldwide

CEMENT GROUT MF-8

INCEPTION: G- GROUT MF-8 is highly fluid, single component, cementitious grout pre packed .

G-GROUT MF-8 powder It is manufactured by unique PSD technology to facilitate easy to inject and effective deep fine cracks, pores and voids. It has much finer particle size than other hydraulically setting materials. It is produced in state of art manufacturing plants in a controlled environment resulting in excellent filling quality.

PURPOSE: G- GROUT MF-8 is suitable for injecting and grouting in rock, soil, concrete and masonry and for filling joints, cracks and holes. �·MF-8 can be used at vertical and horizontal surfaces working. MF-8 is a ready-to-use dry-blend mortar based on cement modified with organic additives, which hardens without shrinkage when mixed with water

BENEFITS: G-GROUT MF-8 can be injected with standard cement grouting equipment

Compatible with most of the admixtures to accelerate / retard the setting time
Supports all portions of structures
Fill up the voids in concrete structure, control or prevent the structure from leakage or weak structures to strengthen
Non-toxic, Non-Hazards
Eco friendly & Cost Effective.

TECHNICAL SPECIFICATION



METHODS OF USES: Pre-process-
The substrate must be cleaned down to load bearing grain structure. Before grouting the substrate is to be rinsed until it is saturated excess water will be removed.
Mixing:

MF-8 should be mixed with a slowly rotating mixer to avoid air pockets. First add 2/3 of the totally required water. After mixing for a short time add the balance of water. It should be mixed for approx. 6 minutes. Plastic consistency for vertical and overhead surfaces: 4 litres of water per 20 kg bag Liquid consistency for injection as per requirement.

PACKAGING G-GROUT MF-8 is available in Bulk Jumbo bags with plastic inner liner. The product is also available in 25 kg plastic line bags.

STORAGE G-GROUT MF-8 when stored correctly has an indefinite shelf life. Like cement, it must be protected from contamination and moisture. The product can be stored in bulk in a clean, dry storage silo. Shelf life is at least 12 month in original packaging when stored in dry conditions between 15-25C, protected from heat, frost and direct sunlight. SAFETY INFORMATION Extensive testing has shown G-GROUT MF-8 to be non-toxic and environmentally benign. No known significant health risks are associated with G-GROUT MF-8 but high con-centrations of dust may cause irritation. It is recommended that suitable protective clothing, gloves and eye/face protection is worn. In case of contact with eyes, rinse immediately with plenty of clean water and seek medical advice

Method of Uses:
â?¢ The substrate must be cleaned down to load bearing grain structure. Before grouting the substrate is to be rinsed until it is saturated excess water will be removed.
â?¢ MF-8 should be mixed with a slowly rotating mixer to avoid air pockets. First add 2/3 of the totally required water. After mixing for a short time add the balance of water. It should be mixed for approx. 6 minutes.
â?¢ Plastic consistency for vertical and overhead surfaces: 4 litres of water per 20 kg bag Liquid consistency for injection as per requirement.
â?¢ Packaging: G-GROUT MF-8 is available in Bulk Jumbo bags with plastic inner liner. The product is also available in 25 kg plastic line bags.
â?¢ Storage: G-GROUT MF-8 when stored correctly has an indefinite shelf life. Like cement, it must be protected from contamination and moisture. The product can be stored in bulk in a clean, dry storage silo.
â?¢ Shelf life is at least 12 month in original packaging when stored in dry conditions between 15-25�°C, protected from heat, frost and direct sunlight.
â?¢ Safety Information: Extensive testing has shown G-GROUT MF-8 to be non-toxic and environmentally benign. No known significant health risks are associated with G-GROUT MF-8 but high con-centrations of dust may cause irritation.
â?¢ It is recommended that suitable protective clothing, gloves and eye/face protection is worn.
â?¢ In case of contact with eyes, rinse immediately with plenty of clean water and seek medical advice.



Attribute
Details


Packaging Size
25 Kg


Usage/Application
Construction


Color
Gray


Grade
MF8


Packaging Type
Bag


Purity
97%


Brand
Guru


Minimum Order Quantity
1000 Kg

92% Ferro Silica Fume meets the creteria of most of the relevent international and Indian Standard specification. Its packed in 25 kg bags & Big 1 mt Jumbo Bags from Ahmedabad, Gujarat. Microsilica is a highly reactive pozzolan and gives concrete a denser microstructure, lower permeability higher electrical resistivity leading to improved durability.

Combined with correct design and workmanship, microsilica concrete offers characteristics that will ensure long term durability and service life. It durability of a reinforced concrete structure can be defined as the capability of the structure to maintain its original functional and structural characteristics during the expected service life in the exposure conditions it was intended for.

G-FINE ULTRAFINE is a new generation Supplementary Cementitious material (SCM) with a built-in high tech content. It is processed based on high glass content with high reactivity obtained through the process of controlled granulation process results in unique particle size distribution. The raw materials are composed primarily of low calcium silicate based mineral additives.

Its latent hydraulic property and pozzolanic reactivity results in an enhanced hydration process. Addition of G-FINE improves the packing density of the paste component. In spite of its high fineness the results are in lowering water demand, admixture dosage and hence improving strength and durability parameters of concrete at all ages.

G-FINETM are observed in the concrete mix design, the initial rate of strength development was found to be increased or similar as other pozzolanic materials.

Application

Roads, Residential, Commercial structures

Producing mass concrete for raft and pile foundations

Low water to binder rations for high performance concrete

Better retention of workability and faster initial strength gain

High Strength construction work in low or high temperature weather

Benefits
Increase compressive strength ,permeability, workability of concrete

Improves the durability of concrete

It can be used in waterproofing as an additive

It can decrease the heat of hydration

Resistance against saltwater & chemicals

Non-Toxic, Eco friendly

Cost effective, economical solution DOSAGE These goals are accomplished using cement pastes, mortars, and concretes with water-Cementitious material ratios ranging from dosage: 5% to 10% .The segregation of cement paste is caused by high super plasticizer dosages that do not cause segregation of concrete with the same water-Cementitious material ratio. Concrete containing G-FINETMas a partial replacement for cement exhibits an increased compressive strength because of the improved strength of its cement paste constituent. Changes in the paste-aggregate interface caused by silica fume appear to have little effect on the uniaxial compressive strength of concrete

PACKAGINGS G-FINE shall be packed and supplied in 25 Kg plastic bags/Customized packing is done if required in G-Fine brand. It is also available in Bulk Jumbo bags. STORAGE G-FINE when stored correctly has an indefinite shelf life. Like cement,G-FINE must be protected from contamination and moisture. The product can be stored in bulk in a clean, dry storage silo.SAFETY INFORMATION / DECLARATION

Extensive testing has shown G-FINE to be non-toxic and environmentally friendly. No known significant health risks are associated with G-FINE but high concentrations of dust may cause irritation. It is recommended that suitable Protective clothing, gloves and eye/face protection is worn. In case of contact with eyes, rinse immediately with plenty of clean water and seek medical advice. The following information has been obtained from test results in an accredited l

Product Information:

European Based Finest filler & additive

G FINE ULTRA FINE EROPEAN BASED FINEST FILLER

G FINE is a new generation supplementary cementitious material (SCM) with a built-in high tech content. In spite of its high fineness it does not increase water demand at the dosage range of 5 to 15 percent of normal OPC in general. In fact concrete slump is seen to be improved, due to the dense packing of cementitious material, producing low void content. The use of G FINE results in hydrated cement matrix to comprise of very small pores.

G FINE is a specially processed product based on high glass content with high reactivity obtained through the process of controlled granulation. The raw materials are composed primary of low calcium silicates. The processing with other select ingredients results in controlled particle size distribution. G FINE can also be used as a high range water reducer to improve compressive strength or as a super workability aid to improve flow.

G FINE can be used as practical substitute for Silica Fume as per the results obtained. If the advantages of G FINE are observed in the concrete mix design, the initial rate of strength development was found to be increased or similar as that of Silica Fume.

Where to use G FINE :

Residential, roads, airports, commercial building. Producing mass concrete structures and pile. In high-rise structures the concrete is to be pump easily. Low water to binder ration for high performance concrete. Precast concrete element for heavy structures precast units. To improved initial strength and increase faster . Better retention of workability and improved strength gain.

Benefits of G FINE :

The workability of the mix retention is improved Improve durability and permeability of concrete Increased strength of concrete Reduction in segregation can be observed in the mix Reduction in heat of hydration of the mix Non- toxic , eco friendly cost effective, economical solution

G-FINE

Packaging:

G FINE is available in Bulk Jumbo bags with plastic inner liner. The product is also available in 25kg plastic lined bags.

Storage:

G FINE when stored correctly has an indefinite shelf life. Like cement, G-FINE must be protected from contamination and moisture. The product can be stored in bulk in a clean, dry storage silo Or werehouse .

Health and Safety:

Extensive testing has shown G FINE to be non-toxic and environmentally benign. No known significant health risks are associated with G FINE but high concentrations of dust may cause irritation. It is recommended that suitable protective clothing, gloves and eye/face protection is worn. In case of contact with eyes, rinse immediately with plenty of clean water and seek medical advice.

Important Notice:

GURU CORPORATION products are guaranteed against defective materials and manufacture and are sold subject to its standard Conditions for the Supply of Goods and Service.

PLEASE NOTE:

T

Paint production involves the formulation and manufacturing of high-quality coatings designed for durability, aesthetics, and protection. Using advanced technology and a variety of finishes, the process caters to diverse applications, including residential, industrial, and commercial surfaces.

Feature Good Performance, Safe Low Power
Driven Type Electric

Storage Capacity 50-100 Ton
Surface Treatment Color Coated
Surface Finishing Paint Coated

Two component, acrylic aliphatic polyurethane coating. Offers excellent gloss and colour retention. It is used for subtracts as steel, aluminum, glass-fiber, plywood etc.

G-GROUT MF-8 INCEPTION. G- GROUT MF-8 is highly fluid,single component, cementitious grout pre packed.
G-GROUT MF-8 powder It is manufactured by unique PSD technology to facilitate easy to inject and effective deep fine cracks,pores and voids.
It has much finer particle size than other hydraulically setting materials.
It is produced in state of art manufacturing plants in a controlled environment resulting in excellent filling quality.
Purpose: G- GROUT MF-8 is suitable for injecting and grouting in rock, soil, concrete and masonry and for filling joints, cracks and holes.
MF-8 can be used at vertical and horizontal surfaces working. MF-8 is a ready-to-use dry-blend mortar based on cement modified with organic additives, which hardens without shrinkage when mixed with water
Benefit: G-GROUT MF-8 can be injected with standard cement grouting equipment
Compatible with most of the admixtures to accelerate / retard the setting time
Supports all portions of structures
Fill up the voids in concrete structure, control or prevent the structure from leakage or weak structures to strengthen
Non-toxic, Non-Hazards
Eco friendly & Cost Effective
TECHNICAL SPECIFICATION
Properties G-Grout Value
Consistency Dry Powder
Colour Grey
METHODS OF USES�· Pre-process:
The substrate must be cleaned down to load bearing grain structure. Before grouting the substrate is to be rinsed until it is saturated excess water will be removed.
Mixing:
MF-8 should be mixed with a slowly rotating mixer to avoid air pockets. First add 2/3 of the totally required water. After mixing for a short time add the balance of water. It should be mixed for approx. 6 minutes.
Plastic consistency for vertical and overhead surfaces: 4 litres of water per 20 kg bag Liquid consistency for injection as per requirement.
Packaging: G-GROUT MF-8 is available in Bulk Jumbo bags with plastic inner liner. The product is also available in 25 kg plastic line bags.
Storage: G-GROUT MF-8 when stored correctly has an indefinite shelf life. Like cement, it must be protected from contamination and moisture. The product can be stored in bulk in a clean, dry storage silo.
Shelf life is at least 12 month in original packaging when stored in dry conditions between 15-25�°C, protected from heat, frost and direct sunlight.
Safety Information: Extensive testing has shown G-GROUT MF-8 to be non-toxic and environmentally benign. No known significant health risks are associated with G-GROUT MF-8 but high con-centrations of dust may cause irritation.
It is recommended that suitable protective clothing, gloves and eye/face protection is worn.
In case of contact with eyes, rinse immediately with plenty of clean water and seek medical advice.

96% G-Grout UF-9 Grouting Compound Powder is professional grade material that used as crack injection grout powder. It has finer particle size. It is produced in well known manufacturing plant in a controlled environment resulting in consistent quality. It is manufactured by unique particle size distribution technique to enable finest particle size for application.

Method of Uses:
The substrate must be cleaned down to load bearing grain structure. Before grouting the substrate is to be rinsed until it is saturated excess water will be removed.
MF-8 should be mixed with a slowly rotating mixer to avoid air pockets. First add 2/3 of the totally required water. After mixing for a short time add the balance of water. It should be mixed for approx. 6 minutes.
Plastic consistency for vertical and overhead surfaces: 4 litres of water per 20 kg bag Liquid consistency for injection as per requirement.
Packaging: G-GROUT MF-8 is available in Bulk Jumbo bags with plastic inner liner. The product is also available in 25 kg plastic line bags.
Storage: G-GROUT MF-8 when stored correctly has an indefinite shelf life. Like cement, it must be protected from contamination and moisture. The product can be stored in bulk in a clean, dry storage silo.
Shelf life is at least 12 month in original packaging when stored in dry conditions between 15-25�°C, protected from heat, frost and direct sunlight.
Safety Information: Extensive testing has shown G-GROUT MF-8 to be non-toxic and environmentally benign. No known significant health risks are associated with G-GROUT MF-8 but high con-centrations of dust may cause irritation.
It is recommended that suitable protective clothing, gloves and eye/face protection is worn.
In case of contact with eyes, rinse immediately with plenty of clean water and seek medical advice.

Microsilicates are used as an additive in cement premixes or concretes,

Bentonites for Paint Production are high-quality clays used to improve the consistency, texture, and stability of paints. They provide excellent thickening, suspension, and anti-settling properties, ensuring smooth application and enhanced durability of the final product.

Usage/ Application : Lamination roll
Pattern : Plain
Color : White
Usage/Application : Lamination
Country of Origin : Made in India
Availability : In Stock

we Balahanuman Plastic Industrial Private Limited is a Manufacturer and Exporter of the wide spectrum Packaging Bags Packaging Roll Plastic Sutli We are Manufacturing these products using premium grade raw material that is procured from the authentic vendors of the market We offer these products at reasonable rates and deliver these within the promised time frame

Usage/ Application : Lamination roll
Pattern ; Plain
Color : White
Usage/Application : Lamination
Country of Origin ; Made in India

we Balahanuman Plastic Industrial Private Limited is a Manufacturer and Exporter of the wide spectrum Packaging Bags Packaging Roll Plastic Sutli We are Manufacturing these products using premium grade raw material that is procured from the authentic vendors of the market We offer these products at reasonable rates and deliver these within the promised time frame

The company, an Agent of a well-known international corporation, is looking for buyers to conclude an annual contract for the purchase and sale of Cement from Pakistan on FOB/CIF terms. The Cement manufacturer is the largest in Pakistan with a production volume of Ordinary Portland Cement of 25,000 tons per day. Products are supplied to the USA, Europe, Great Britain and countries of Asia and Africa. Availability of Certificates of Conformity and Quality Stability in accordance with European and American Standards. ISO 14001, ISO 9001 certification. Main brands of Cement: Sulphate-Resistant Cement 1 42 5R, Portland Cement 1 42 5N and Asphalt-Resistant Cement 42, 5N. Packaging: Big Bags of 250/500 kg; Price: as agreed with the buyer; Payment terms: DLC; Product quality: according to the manufacturer's specification, which meets the export standard; Inspection: SGS/equivalent. Supply Contract is concluded directly with the manufacturer. Contact person: Nick

INCEPTION: G- GROUT MF-8 is highly fluid, single component, cementitious grout pre packed .

G-GROUT MF-8 powder: It is manufactured by unique PSD technology to facilitate easy to inject and effective deep fine cracks, pores and voids. It has much finer particle size than other hydraulically setting materials. It is produced in state of art manufacturing plants in a controlled environment resulting in excellent filling quality.

PURPOSE: G- GROUT MF-8 is suitable for injecting and grouting in rock, soil, concrete and masonry and for filling joints, cracks and holes. �·MF-8 can be used at vertical and horizontal surfaces working. MF-8 is a ready-to-use dry-blend mortar based on cement modified with organic additives, which hardens without shrinkage when mixed with water

BENEFITS: G-GROUT MF-8 can be injected with standard cement grouting equipment

Compatible with most of the admixtures to accelerate / retard the setting time
Supports all portions of structures
Fill up the voids in concrete structure, control or prevent the structure from leakage or weak structures to strengthen
Non-toxic, Non-Hazards
Eco friendly & Cost Effective.

TECHNICAL SPECIFICATION

Properties G-Grout Value
Consistency Dry Powder
Colour Grey


METHODS OF USES: Pre-process:
The substrate must be cleaned down to load bearing grain structure. Before grouting the substrate is to be rinsed until it is saturated excess water will be removed.
Mixing:

MF-8 should be mixed with a slowly rotating mixer to avoid air pockets. First add 2/3 of the totally required water. After mixing for a short time add the balance of water. It should be mixed for approx. 6 minutes. Plastic consistency for vertical and overhead surfaces: 4 litres of water per 20 kg bag Liquid consistency for injection as per requirement.

PACKAGING G-GROUT MF-8 is available in Bulk Jumbo bags with plastic inner liner. The product is also available in 25 kg plastic line bags.

STORAGE G-GROUT MF-8 when stored correctly has an indefinite shelf life. Like cement, it must be protected from contamination and moisture. The product can be stored in bulk in a clean, dry storage silo. Shelf life is at least 12 month in original packaging when stored in dry conditions between 15-25C, protected from heat, frost and direct sunlight. SAFETY INFORMATION Extensive testing has shown G-GROUT MF-8 to be non-toxic and environmentally benign. No known significant health risks are associated with G-GROUT MF-8 but high con-centrations of dust may cause irritation. It is recommended that suitable protective clothing, gloves and eye/face protection is worn. In case of contact with eyes, rinse immediately with plenty of clean water and seek medical advice.

Method of Uses:
â?¢ The substrate must be cleaned down to load bearing grain structure. Before grouting the substrate is to be rinsed until it is saturated excess water will be removed.
â?¢ MF-8 should be mixed with a slowly rotating mixer to avoid air pockets. First add 2/3 of the totally required water. After mixing for a short time add the balance of water. It should be mixed for approx. 6 minutes.
â?¢ Plastic consistency for vertical and overhead surfaces: 4 litres of water per 20 kg bag Liquid consistency for injection as per requirement.
â?¢ Packaging: G-GROUT MF-8 is available in Bulk Jumbo bags with plastic inner liner. The product is also available in 25 kg plastic line bags.
â?¢ Storage: G-GROUT MF-8 when stored correctly has an indefinite shelf life. Like cement, it must be protected from contamination and moisture. The product can be stored in bulk in a clean, dry storage silo.
â?¢ Shelf life is at least 12 month in original packaging when stored in dry conditions between 15-25�°C, protected from heat, frost and direct sunlight.
â?¢ Safety Information: Extensive testing has shown G-GROUT MF-8 to be non-toxic and environmentally benign. No known significant health risks are associated with G-GROUT MF-8 but high concentrations of dust may cause irritation.
â?¢ It is recommended that suitable protective clothing, gloves and eye/face protection is worn.
â?¢ In case of contact with eyes, rinse immediately with plenty of clean water and seek medical advice.



Attribute
Details


Packaging Size
25 Kg


Usage/Application
Construction


Brand
Guru


Color
Gray


Grade
MF8


Packaging Type
PP Bags


Purity
95%


Minimum Order Quantity
2000 Kg

Product Information:

European Based Finest filler & additive

G FINE Micro FINE ULTRA FINE EROPEAN BASED FINEST FILLER



G FINE is a new generation supplementary cementitious material (SCM) with a built-in high tech content. In spite of its high fineness it does not increase water demand at the dosage range of 5 to 15 percent of normal OPC in general. In fact concrete slump is seen to be improved, due to the dense packing of cementitious material, producing low void content. The use of G FINE results in hydrated cement matrix to comprise of very small pores.

G FINE is a specially processed product based on high glass content with high reactivity obtained through the process of controlled granulation. The raw materials are composed primary of low calcium silicates. The processing with other select ingredients results in controlled particle size distribution. G FINE can also be used as a high range water reducer to improve compressive strength or as a super workability aid to improve flow.

G FINE can be used as practical substitute for Silica Fume as per the results obtained. If the advantages of G FINE are observed in the concrete mix design, the initial rate of strength development was found to be increased or similar as that of Silica Fume.


Where to use G FINE :

Residential, roads, airports, commercial building. Producing mass concrete structures and pile. In high-rise structures the concrete is to be pump easily. Low water to binder ration for high performance concrete. Precast concrete element for heavy structures precast units. To improved initial strength and increase faster . Better retention of workability and improved strength gain.

Benefits of G FINE :

The workability of the mix retention is improved Improve durability and permeability of concrete Increased strength of concrete Reduction in segregation can be observed in the mix Reduction in heat of hydration of the mix Non- toxic , eco friendly cost effective, economical solution

G-FINE

Packaging:

G FINE is available in Bulk Jumbo bags with plastic inner liner. The product is also available in 25kg plastic lined bags.

Storage:

G FINE when stored correctly has an indefinite shelf life. Like cement, G-FINE must be protected from contamination and moisture. The product can be stored in bulk in a clean, dry storage silo Or warehouse .

The company, an agent of a well-known international corporation, is looking for buyers from the European Union countries to conclude an annual contract for the supply of Cement Clinker and Portland Cement on CIF terms to the ports of Germany, France and Spain. Cement manufacturers have Certificates of Quality Conformity in accordance with European and American standards, as well as ISO 14001, ISO 9001 Certification; Packaging: Big Bags of 500/ 1000/ 1500 kg or in bulk; The price of Ordinary Cement Clinker OPC from a manufacturer who has already paid environmental fees (CBAM) will be 90 euros per ton. The price from a Seller without verified emissions will be 45 euros per ton. Payment terms: DLC; Product quality: according to the manufacturer's specification, meets the export standard; Inspection: SGS/equivalent. Contact person: Nick

Inception

G-GROUT UF-9 is professional grade material that used as crack injection grout powder. It has finer particle size. It is produced in well known manufacturing plant in a controlled environment resulting in consistent quality. It is manufactured by unique particle size distribution technique to enable finest particle size for application.

Purpose

Fixing ground anchors for sheet pile walls, concrete pile walls, retaining walls tunnels etc.
Defects on building masonry or pavement.
Filling the void between the lining and rock face in tunnel work.
Injection grouting of joints in masonry structures, restoration of heritage structures, dams, etc.

Benefits

G-GROUT UF-9 can be injected with standard cement grouting equipment
Compatible with most of the admixtures to accelerate / retard the setting time
Supports all portions of structures
Fill up the voids in concrete structure, control or prevent the structure from leakage or weak structures to strengthen
Non-toxic, Non-Hazards
Eco friendly
Benefit in cost.

Stoage

G-GROUT UF-9 when stored correctly has an indefinite shelf life. Like cement, it must be protected from contamination and moisture. The product can be stored in bulk in a clean, dry storage silo.

HEALTH AND SAFETY

Extensive testing has shown G-GROUT UF-9 to be non-toxic and environmentally benign. No known significant health risks are associated with G-GROUT UF-9 but high concentrations of dust may cause irritation. It is recommended that suitable protective clothing, gloves and eye/face protection is worn. In case of contact with eyes, rinse immediately with plenty of clean water and seek medical advice.

Packing

G-GROUT UF-9 is available in Bulk Jumbo bags with plastic inner liner. The product is also available in 25kg plastic lined bags.

Welcome to Gremlog Trading DMCC, a catalyst for sustainable solutions and innovation. We are thrilled to introduce our premier offering carbon dust, a by-product of aluminium smelting . As the primary supplier for carbon dust production, Gremlog Trading DMCC is at the forefront of this groundbreaking initiative. This high-carbon-content by-product, generated during the production of anodes for aluminium smelting, stands as a remarkable alternative fuel for the cement and steel industry.

Product Description:

Nile Atlantic Trading DMCC is a reliable supplier of premium Raw Gypsum Rock (Crude Natural Gypsum - Calcium Sulfate Dihydrate), specifically graded for the cement manufacturing industry. Sourced directly from top-tier quarries in Egypt, we guarantee consistent quality and reliable monthly supply.

Technical Specifications:
- Chemical Form: Calcium Sulfate Dihydrate (CaSO4�·2H2O)
- SO3 Content: 38%-40% (Optimal for cement set regulation)
- Moisture Content: <1%
- Purity: > 90% gypsum content, minimized insoluble residues
- Size/Granulometry: Crushed lumps, 0-50 mm
- Appearance: Natural white/pinkish rock, free from excessive clay or organics

Supply Capacity & Packaging:
- Monthly Capacity: Up to 60,000 MT / month
- Packaging Options:
- Bulk shipment (Breakbulk vessel or Container Liners)
- 1.0 MT or 1.5 MT Jumbo Bags (Big Bags) with discharge spout

Target Markets:
- Cement manufacturers in Bangladesh, India, Southeast Asia, Africa, and the Middle East.

Pricing & Terms:
- Incoterms: FOB Ain Sokhna (Egypt) OR CIF (Main Ports: Chittagong, Mongla, Chennai, etc.)
- Price: Competitive market pricing provided upon official Request for Quotation (RFQ). (Note: We protect our clients' project budgets with transparent, volume-based tiered pricing).
- Payment Terms: Irrevocable Letter of Credit (LC) at Sight, or negotiable for long-term contracts.
- Quality Guarantee: SGS or Bureau Veritas inspection at the loading port (weight, XRF analysis for SO3, moisture, and granulometry).

Why Choose Nile Atlantic Trading?
- Direct Quarry Access: No unnecessary middlemen, ensuring the best FOB base price.
- DMCC Dubai Based: Secure, transparent, and internationally recognized trading practices.
- Logistics Expertise: We handle the complex documentation and shipping coordination to ensure on-time delivery to your port.

Next Steps for Buyers:
- To receive our best CIF or FOB quotation, please send us your Request for Quotation (RFQ) including:
1 - Required monthly volume
2 - Preferred packaging (Bulk or Big Bags)
3 - Destination port
4 - Any specific TDS requirements from your plant.

Cement Industry Grinding Balls are specially engineered grinding media designed to deliver superior performance in cement clinker grinding and raw material milling. Manufactured from high-grade alloy steel, forged steel, or chrome-based materials, these balls provide excellent hardness, uniform wear resistance, and high impact strength. Their consistent performance ensures stable mill operation, improved grinding efficiency, and enhanced cement fineness. With low breakage rates and long service life, these grinding balls help reduce power consumption, minimize downtime, and optimize cement production output.

Cement Mill Grinding Balls are specially engineered grinding media designed to deliver maximum efficiency in clinker grinding and raw material milling. Manufactured using high-grade alloy steel or chrome-based materials, these balls offer superior hardness, excellent wear resistance, and high impact toughness. Their optimized composition and heat-treatment process ensure consistent performance, reduced grinding costs, and improved output in cement production. Ideal for both dry and wet grinding processes, they enhance mill productivity and support long service life.

Product Type - Wooden Intarsia/ Wood Picture

Material - Pine Wood

Color and Design - Following as customer's request

Size - 30cmLx30cmW, your request

Usage - Decoration for home, gift

Pre Painted Galvanized Steel Sheets (PPGI) are high-quality coated steel products manufactured by applying a layer of protective zinc coating on steel sheets followed by surface treatment and colored paint coating. These sheets combine the strength of galvanized steel with attractive finishes, excellent corrosion resistance, and long service life.

Product Type : Color Coated Galvanized Steel Sheet
Base Material : Cold Rolled Galvanized Steel
Coating Type : Zinc + Paint Coating
Surface Finish : Matte / Glossy / Textured
Thickness : 0.12 mm - 1.5 mm
Width ; 600 mm - 1500 mm

20cm x 20cm Mix Design Crystal Wall Paintings

Business Type : Exporter, Supplier, Trader
Finishing : Fine
Color : Multiple Color Available
Frame Shape : Round

Product Details

Usage : Wall Decoration, Home Decoration
Packaging Type : Carton Box
Frame Type : Framed
Specialities : Rust Free, Long Lasting, Elegant Attraction
Country of Origin : India
Caring Instructions : Professional cleaning only

Business Type : Exporter, Supplier, Trader
Color ; Multiple Color Available
Frame Shape : Round
Usage : Wall Decoration, Home Decoration

Product Details

Pattern : Printed
Packaging Type : Carton Box
Specialities : Rust Free, Great Design, Elegant Attraction
Overall Dimension : 16 x 16 cm

G-FINE ULTRAFINE is a new generation Supplementary Cementitious material (SCM) with a built-in high tech content. It is processed based on high glass content with high reactivity obtained through the process of controlled granulation process results in unique particle size distribution. The raw materials are composed primarily of low calcium silicate based mineral additives.

Its latent hydraulic property and pozzolanic reactivity results in an enhanced hydration process. Addition of G-FINE improves the packing density of the paste component. In spite of its high fineness the results are in lowering water demand, admixture dosage and hence improving strength and durability parameters of concrete at all ages.

G-FINE are observed in the concrete mix design, the initial rate of strength development was found to be increased or similar as other pozzolanic materials.

Application

Roads, Residential, Commercial structures

Producing mass concrete for raft and pile foundations

Low water to binder rations for high performance concrete

Better retention of workability and faster initial strength gain

High Strength construction work in low or high temperature weather

Benefits
Increase compressive strength ,permeability, workability of concrete
Improves the durability of concrete

It can be used in waterproofing as an additive

It can decrease the heat of hydration

Resistance against saltwater & chemicals

Non-Toxic, Eco friendly

Cost effective, economical solution DOSAGE These goals are accomplished using cement pastes, mortars, and concretes with water-Cementitious material ratios ranging from dosage: 5% to 10% .The segregation of cement paste is caused by high super plasticizer dosages that do not cause segregation of concrete with the same water-Cementitious material ratio. Concrete containing G-FINETMas a partial replacement for cement exhibits an increased compressive strength because of the improved strength of its cement paste constituent. Changes in the paste-aggregate interface caused by silica fume appear to have little effect on the uniaxial compressive strength of concrete. PACKAGINGS G-FINE shall be packed and supplied in 25 Kg plastic bags/Customized packing is done if required in G-Fine brand. It is also available in Bulk Jumbo bags. STORAGE G-FINE when stored correctly has an indefinite shelf life. Like cement, G-FINE must be protected from contamination and moisture. The product can be stored in bulk in a clean, dry storage silo. SAFETY INFORMATION / DECLARATION
Extensive testing has shown G-FINE to be non-toxic and environmentally friendly. No known significant health risks are associated with
G-FINE but high concentrations of dust may cause irritation. It is recommended that suitable Protective clothing, gloves and eye/face protection is worn. In case of contact with eyes, rinse immediately with plenty of clean water and seek medical advice. The following information has been obtained from test results in

Wooden Fish Kid Toys For Painting (pita)

CUCKOO 007
Brown

Antique dial
Musical Cuckoo and bird chirping
swinging pendulum
Hand Crafted carving
auto night shut-off music
by sensor
100% Solid Wood
Detailed Engraving
volume control switch
Step Movement (+/- 20 seconds per month accuracy)
1 Year Warranty

CUCKOO
037
Brown

Antique dial
Musical Cuckoo and bird chirping
swinging pendulum
Hand Crafted carving
auto night shut-off music
by sensor
100% Solid Wood
Detailed Engraving
volume control switch
Step Movement (+/- 20 seconds per month accuracy)
1 Year Warranty

CUCKOO 017
Brown

Antique dial
Musical Cuckoo and bird chirping
swinging pendulum
Hand Crafted carving
auto night shut-off music
by sensor
100% Solid Wood
Detailed Engraving
volume control switch
Step Movement (+/- 20 seconds per month accuracy)
1 Year Warranty

CUCKOO
027
Brown

Antique dial
Musical Cuckoo and bird chirping
swinging pendulum
Hand Crafted carving
auto night shut-off music
by sensor
100% Solid Wood
Detailed Engraving
volume control switch
Step Movement (+/- 20 seconds per month accuracy)
1 Year Warranty

Business Type : Exporter, Supplier, Trader
Color : Multiple Color Available
Frame Shape : Rectangular
Style : Landscape

Product Details

Pattern : Printed
Frame Type : Framed
Specialities : Seamless Design, Long Lasting, Great Design
Country of Origin : India
Set Contains : 3 x 1 set
Caring Instructions : Professional cleaning only

The company, an agent of a well-known international corporation, is looking for buyers to conclude an annual contract for the purchase and sale of cement from Vietnam and Pakistan on FOB/CIF terms. Cement manufacturers are enterprises with a production volume of ordinary Portland cement of 25,000 tons or more per day. Products are supplied to the USA, Europe, Great Britain and countries in Asia and Africa. Availability of certificates of conformity and quality stability in accordance with European and American standards. ISO 14001, ISO 9001 certification. Main cement brands: Sulfate-resistant cement 1 42 5R/2 52 5 R, Portland cement 1 42 5N/1 52 5N and asphalt-resistant cement 42, 5N; MOQ: 5,000 MT; Packaging: Big Bags of 500/ 1000/ 1500 kg; FOB price: $ 45-50; Payment terms: DLC; Product quality: as per manufacturer's specification, meeting export standard; Inspection: SGS/equivalent. Supply contract is concluded directly with the manufacturer. Contact person: Nick

The company, an agent of a well-known international corporation, is looking for buyers to conclude an annual contract for the purchase and sale of cement from Vietnam and Pakistan on FOB/CIF terms. Cement manufacturers are enterprises with a production volume of ordinary Portland cement of 25,000 tons or more per day. Products are supplied to the USA, Europe, Great Britain and countries in Asia and Africa. Availability of certificates of conformity and quality stability in accordance with European and American standards. ISO 14001, ISO 9001 certification. Main cement brands: Sulfate-resistant cement 1 42 5R, Portland cement 1 42 5N / 1 52 5N and asphalt-resistant cement 42, 5N; MOQ: 5, 000 MT; Packaging: Big Bags of 500/ 1000/ 1500 kg; FOB price: $ 45-50; Payment terms: DLC; Product quality: according to the manufacturer's specification, which meets the export standard; Inspection: SGS/equivalent. The supply contract is concluded directly with the manufacturer. Contact person: Nick

CEM I and CEM II Portland Cement are high-quality hydraulic binders designed for reliable construction and infrastructure applications. CEM I provides high clinker content, consistent strength development, and excellent durability, while CEM II incorporates selected supplementary cementitious materials to improve performance and resource efficiency. Both cement types are suitable for concrete, mortar, masonry, precast products, foundations, roads, bridges, and general structural works. Manufactured under controlled quality conditions, the cement offers dependable setting, strength, and workability. Available in bulk or moisture-resistant bags, it is suitable for domestic and international B2B supply. Product specifications can be tailored to applicable regional standards and project requirements.

High-whiteness, premium-grade white cement suitable for decorative, architectural, and finishing applications. Offers excellent smoothness, strong bonding, and consistent quality. Ideal for wall putty, tile adhesives, precast products, terrazzo flooring, and exterior/interior finishes.

Packaging: 25kg / 50kg bags & customized packaging available
The price is negotiable.
Supply: Bulk quantities available
Origin: India

Business Type ; Exporter, Supplier, Trader
Color ; Multiple Color Available
Frame Shape : Different Shape Available
Usage : Wall Decoration, Home Decoration

Product Details

Style : Portrait
Packaging Type : Carton Box
Frame Type : Framed
Specialities : Seamless Design, Long Lasting, Great Design
Caring Instructions Professional cleaning only

Business Type ; Exporter, Supplier, Retailer
Color ; Multiple Color Available
Frame Shape : Square
Usage : Wall Decoration, Home Decoration

Product Details

Pattern : Plain
Packaging Type : Carton Box
Specialities : Seamless Design, Long Lasting, Great Design
Mode Type : Portrait Mode
Country of Origin : India
Caring Instructions : Professional cleaning only

Birla White Cement

Business Type ; Exporter, Supplier, Trader
Finishing : Polished
Color : Multiple Color Available
Frame Shape : Square

Product Details

Usage : Wall Decoration, Home Decoration
Style : Portrait
Pattern : Printed
Frame Type : Framed
Specialities : Scratch Proof, Long Lasting, Elegant Attraction
Country of Origin : India

Cement clinkers is our first product in our cement manufacturing process. Some of our clients prefer our cement clinkers due to its adherence to stringent quality standards during its manufacture - as a result, they do not have to worry about producing superior quality cement as their end product.

Cement, our main product of our cement manufacturing process, is widely used in various types of construction projects - industrial or domestic alike. Our clients prefer our superior quality cement because of our adherence to quality standards.



Specification : Descriptions
CaO : 63.50% to 64.00%
SiO2 : 21.20% to 21.70%
Al2O3 : 4.80% to 5.40%
Fe2O3 : 3.50% to 4.20%
MgO : Upto 3.90%
SO3 : Upto 1.12%
K2O : Upto 0.60%
Na2O : Upto 0.40%

Cement

We have all variety of cement available