Please click here to check who's online and chat with them.

Find Verified Industrial Processes Suppliers, Manufacturers and Wholesalers

Top Supplier Cities : -   Toronto   North York  
GOLD Member
Mar-26-07
Supplier From Milton, Ontario, Canada
 Inquire Now
GOLD PLUS Member
VERIFIED
Nov-26-24
Supplier From Toronto, Ontario, Canada
 Inquire Now  
Fuel Oil is a fraction obtained from petroleum distillation either as a distillate or a residue Broadly speaking oil is any liquid petroleum product which is burned in a furnace or boiler for the generation of heat or used in an engine for the generation of power except oils having a flash point of approximately 40 C 104 F Oil is made of long hydrocarbon chains particularly alkanes cycloalkanes and aromatics The term Fuel Oil is also used in a stricter sense to refer only to the heaviest commercial fuel that can be obtained from crude oil heavier than gasoline and naphtha

Fuel oils are used as fuel for power generation marine bunkers and large industrial heating plants Fuel oil 180 CST also known as Bunker Fuel or Residual Fuel Oil is characterized by its viscosity which is measured in centistokes CST The number 180 indicates the maximum viscosity of the oil at 50 degrees Celsius This specification makes it a relatively thick and viscous fuel compared to lighter fuel oils Both CST 180 and CST 380 fuel oils are considered heavy fuel oils and are commonly used in the shipping industry They are often referred to as bunker fuels and are used in vessels like cargo ships container ships and oil tankers
GOLD PLUS Member
Aug-21-26
Supplier From Ottawa, ON, Canada
 Inquire Now
GOLD PLUS Member
VERIFIED
Nov-26-24
Supplier From Toronto, Ontario, Canada
 Inquire Now  
Crude oil is a naturally occurring unrefined petroleum product that is made up of a mixture of hydrocarbons and other organic compounds It is the raw material that is used to produce a variety of refined petroleum products including gasoline diesel fuel and heating oil Crude oil is extracted from the earth through drilling and is transported to refineries where it is processed and refined into various products Crude oil has a wide range of physical properties Crude oil is made up of 845 carbon 13 hydrogen 13 sulfur and less than 1 each of nitrogen oxygen metals and salts

REBCO is a specific type of crude oil that is produced in Russia and the surrounding regions It is a highquality crude oil that is known for its low sulfur content and low viscosity The middle east light crude oil is also highquality crude oil The GOST 51 8582002 specification refers to the Russian standard for REBCO which outlines the crude oils characteristics and performance requirements Gost 51 858 2002 offers from exporters manufacturers suppliers wholesalers and distributors globally by price and quality of the oil

REBCO is an important commodity in the global energy market and it is carefully regulated to ensure that it meets the necessary standards for safety and performance Maximum Sulfur Content 18 Paraffin Content 60 Maximum Water Sediment Content 12 Distillation Weight 21 Up to 200 N min 21 Up to 300 N min 41 Up to 350 N min 50 and Maximum salts content MGL 100
GOLD PLUS Member
VERIFIED
Dec-15-25
Supplier From Toronto, Ontario, Canada
 Inquire Now  
NSRIC Green Supplies Inc. (NGS) is your licensed and trusted intermediary for the global trade of Lubricating Oil (All Grades). As a critical component across virtually every industrial and transport sector, securing a reliable, high-quality supply chain is paramount for your business continuity and profitability.

We specialize in connecting serious, verified end buyers with reputable global suppliers. Whether your requirement is for industrial oils, automotive lubricants, marine engine oils, or specialized synthetic grades, NGS facilitates secure, transparent, and efficient transactions. Our expertise minimizes risk, navigates complex international logistics, and ensures compliance with all global trade standards and specifications, including API, ACEA, and relevant ISO standards.

NGS streamlines the entire procurement process, from initial inquiry and grade specification to final delivery documentation. Trust our licensed intermediary services to secure the lubricating oil grades you need, ensuring a seamless and highly profitable global trade operation. Contact NGS today to discuss your specific bulk requirements.
551 Industrial Processes Suppliers
Short on time? Let Industrial Processes sellers contact you.
GOLD Member
VERIFIED
May-29-26
Supplier From Brampton, Ontario, Canada
 Inquire Now
GOLD PLUS Member
Oct-25-20
Supplier From Richmond, BC, Canada
 Inquire Now
Mar-04-25

Alberger Fine Flake Supreme Salt

$0
MOQ: Not Specified
Sample Available
Supplier From North York, Ontario, Canada
 Inquire Now  
Alberger�® Fine Flake Supreme Salt is Sodium Chloride (salt) treated with Glycerine & yellow Prussiate of Soda.
Dec-12-24

Baby's Only Organic Dairy With Dha & Ara Tod

$5
MOQ: 1000  Cans
Sample Available
Supplier From North York, Ontario, Canada
 Inquire Now  
Baby's Only Organic Dairy with DHA & ARA Toddler Formula is a premium, thoughtfully formulated nutritional option for growing toddlers. Developed by Nature's One, a trusted name in organic nutrition, this formula provides a balanced blend of essential nutrients crucial for a toddler's healthy development. Enriched with DHA and ARA, important fatty acids for brain and eye development, it offers comprehensive support for cognitive function. Made from high-quality organic dairy, it provides a wholesome and easily digestible source of proteins and essential vitamins and minerals. Free from artificial additives, pesticides, and GMOs, Baby's Only Organic Dairy with DHA & ARA Toddler Formula prioritizes the well-being of growing children, ensuring they receive the best possible nutrition for their continued growth and development.
Feb-19-25

Sodium Hydrosulfite

$0
MOQ: Not Specified
Sample Available
Supplier From North York, Ontario, Canada
 Inquire Now  
Commodity: Sodium Hydrosulfite
Other name: Synonyms: Sodium Hydrosulphite; Sodium Dithionite; Dithionous acid, Disodium salt; Sodium Sulfoxylate
CAS No.: 7775-14-6
Molecular Weight: 174.10
Chemical Formula: Na2S2O4

Product Description
Appearance: White, crystalline powder.

Product Feature
Odor: Slight irritative.
Specific Gravity: Unavailable
Solubility: Soluble in water.
Density: 2.19
pH: 6-7
pH Test-Method: PH test paper.
% Volatiles by volume @ 21C (70F): 0
Boiling Point: Not applicable.
Melting Point: >300 C Decomposes.
Vapor Pressure (mm Hg): No information found.
Bulk Density: ~0.9
Evaporation Rate (BuAc=1): No information found.

Application
1. Widely used in textile industry for vat dyeing, reduction cleaning, printing and stripping, textile textile bleaching .
2. bleaching paper pulps , especially mechanical pulps, its the most fittable bleaching agent in pulps.
3. bleaching kaolin clay, fur bleaching and reductive whitening, bleaching of bamboo products and straw products,
4. in mineral, the compound of thiourea and other sulphides.
5. as reducing agent in chemical industry.
6. Sodium hydrosulfite food additive grade is used in foodstuffs, as bleaching agent and preservative dried fruits, dried vegetable, vermicelli, glucose, sugar, rock sugar, caramel, candy, liquid glucose, bamboo shoots, mushrooms and canned mushrooms.

Packaging 50kg/100kg net in iron drums with double PVC bags

Product Specification/Models
NDEX 90%, 88%, 85%. FOOD ADDITIVE
Na2S2O4, 90%, 88%, 85%, Fe 20ppm ZincZnOther heavy metal
calculated as Pb, 1ppm
Water Insolubles05%
Shelf Life(month)12
Feb-20-25

Polymer Carbomer N2 Pemulen Tr-2

$0
MOQ: Not Specified
Sample Available
Supplier From North York, Ontario, Canada
 Inquire Now  
INCI: Alkyl Acrylate Crosspolymer Carbomer Carbopol N2

Description: Multi-functional emulsifier, capable of stabilizing and thickening emulsions even at low dosage, Cold process, No need to calculate the HLB value. It can emulsify silicone to create semi-transparent cream. Provides moisturizing and weightless sensory for cream.
High viscosity formulation: THEMAX N1
Low viscosity formulation: THEMAX N2
Recommend Dosage: 0.1-0.4%
Features:
Emulsify a variety of oils and grease
Excellent emulsion stability
Suitable for a cold mix process
Feb-20-25

Decanoyl/octanoyl-Glycerides Cas 65381-09-1

$0
MOQ: Not Specified
Sample Available
Supplier From North York, Ontario, Canada
 Inquire Now  
Caprylic acid/capric acid triglycerides are clear to light yellow, high clarity and odorless oils, and are derivatives of palm oil or coconut oil. Widely used in industries such as food, medicine, and cosmetics, it can be used as a base material for moisturizing factors, a stabilizer for cosmetics, an antifreeze, and a homogenizer.
Feb-26-25

Avobenzone Cas 70356-09-1

$0
MOQ: Not Specified
Sample Available
Supplier From North York, Ontario, Canada
 Inquire Now  
Avobenzone is an oil-soluble ingredient used in sunscreen products to absorb the full spectrum of UVA rays.Avobenzone was patented in 1973 and was approved in the EU in 1978. Its use is approved worldwide.
Pure avobenzone is a whitish to yellowish crystalline powder with a weak odor, dissolving in isopropanol, dimethyl sulfoxide, decyl oleate, capric acid/caprylic, triglycerides and other oils. It is not soluble in water.

Avobenzone absorbs both UV-(380-315 nm that is associated with long term skin damage) and UV-B (315-280 nm that causes sunburn) rays. Avobenzone is known as one of the most effective sunscreen ingredients.
Feb-21-25

Zinc Stearate Powder Cas 557-05-1

$0
MOQ: Not Specified
Sample Available
Supplier From North York, Ontario, Canada
 Inquire Now  
Zinc Stearate Typical Properties
Item Standard
Appearance White fine powder
Loss on drying(%) 1.0
Zinc Assay(%) 10.3-11.3
Free acid(%) 1.0
Finess(325mesh) 99%
Melting Point 115-125
Zinc Stearate Usage

1. Used as a softening lubricant for rubber products, a polishing agent for textiles, a stabilizer for polyvinyl chloride plastics

2. Used as a stabilizer for polyvinyl chloride plastic products, a softener for rubber products

3. Used in the formulation of the industry, curing oils and lubricants, as well as paint drying agents. It is used for the processing of PVC and rubber non-toxic products, which can effectively improve the photothermal stability of PVC and rubber products. The dosage in PVC processing is usually <1 part; it is used in rubber products, also used in PP, PE, PS, EPS polymerization. The additive and pencil lead are generally used in an amount of 1 to 3 parts.
Feb-26-25

Isopropyl Myristate Ipm Cas 110-27-0

$0
MOQ: Not Specified
Sample Available
Supplier From North York, Ontario, Canada
 Inquire Now  
Product Name: Isopropyl myristate
Synonyms: Isopropyl Myristate, 96% 25GR; IPM 100; IPM-EX; IPM-R; Radia 7730 (IPM); Isopropyl myristate Vetec(TM) reagent grade, 98%; MYRISTIC ACID ISOPROPYL ESTER MINIMU; ISO-PROPYL N-TETRADECANOATE
CAS: 110-27-0
MF: C17H34O2
MW: 270.45
EINECS: 203-751-4
Melting point ~3 C (lit.)
Boiling point 193 C/20 mmHg (lit.)
density 0.85 g/mL at 25 C (lit.)
vapor pressure <1 hPa (20 C)
FEMA 3556 | ISOPROPYL MYRISTATE
refractive index n20/D 1.434(lit.)
Fp >230 F
storage temp. 2-8 C
solubility <0.05mg/l
form Liquid
Specific Gravity 0.855 (20/4 C)
color Clear
Odor odorless


Application

Isopropyl myristate (IPM) is a fatty acid ester which is used as solvent in water-in-oil emulsion, oils and fatty based ointments. The use of IPM is recommended in the Sterility Test chapter of the European, Japanese and United States Pharmacopoeia (EP, 2.6.13, JP, 4.06 and USP, 71) as diluent for oils and oily solutions, as well as for ointments and creams. Indeed, its solvent properties improve the filterability of these samples.
Isopropyl myristate is known as a penetration enhancer for topical preparations. It is a water clear, low viscous oily liquid with a very good spreading capacity on the skin. Isopropyl Myristate is mainly used in cosmetics as an oil component for emulsions, bath oils and as a solvent for active substances.
Feb-25-25

4-Chloro-3,5-Dimethylphenol Cas 88-04-0

$0
MOQ: Not Specified
Sample Available
Supplier From North York, Ontario, Canada
 Inquire Now  
4-Chloro-3,5-dimethyl is a white crystalline powder. Melting point 115-116 C, boiling point 246 C. At 20 C, 1g can be dissolved in 3L water, 1 part of 95% alcohol, ether, benzene, terpenes, non-volatile oils. It has a slight smell and can volatilize with water. Stable in hot water.
Feb-24-25

Diafenthiuron

$0
MOQ: Not Specified
Sample Available
Supplier From North York, Ontario, Canada
 Inquire Now  
Diafenthiuron:
Appearance: White or light gray powder;
Specific gravity: 1.08 (20 centigrade), melting point 149.6 centigrade, steam pressure < 2 X 10-6


Diafenthiuron Application:
Uses Insecticide and acaricide effective against phytophagous mites (Tetranychidae, Tarsonemidae), Aleyrodidae, Aphididae and Jassidae on cotton, various field and fruit crops, ornamentals and vegetables. Also controls some leaf-feeding pests in cole crops (Plutella xylostella), soya beans (Anticarsia gemmatalis) and cotton (Alabama argillacea).

Diafenthiuron Uses:
It is widly applied in the fruit tree, the grain cotton and kapok, the vegetables and decorative plants.
Can effectively control the aphid- Sensitive, strains as well as carbamates, pyrethroids and imidacloprid produced by aphids, leafhopper, spider, and the evening whitefly, such as whitefly, have been on resounding nature of the dismondback moth, pieris, and the type of army worm pest control effect of a higher, the plants have been resistant mites. Into the mite, mite, mite eggs, have a very good effect. Acricide at have and abroad because of the urgent need for replacement of varieties, and in the tea and black tea inchworm mite pests such as the prevention and treatment, diafenthiuron in full compliance with European Union and the United States residue standards Diafenthiuron man killed in the application development is of special importance.
Feb-20-25

Trichloroisocyanuric Acid Cas 87-90-1

$0
MOQ: Not Specified
Sample Available
Supplier From North York, Ontario, Canada
 Inquire Now  
Trichloroisocyanuric acid disinfection performance is excellent, is a new generation of broad spectrum, high efficiency, low toxicity fungicide, bleach and shrink resistant agent. Mainly used for drinking water, industrial water recycling, swimming pools, restaurants, hotels, public places, families, hospitals, and prevention of fish disease, poultry eggs and other disinfection and sterilization. It can kill almost all fungi, bacteria, viruses and spores.
Feb-26-25

Aluminum Ammonium Sulfate Cas 7784-25-0

$0
MOQ: Not Specified
Sample Available
Supplier From North York, Ontario, Canada
 Inquire Now  
1. Used as a paper sizing agent in the papermaking industry to enhance the water resistance and impermeability of paper;
2. After being dissolved in water, it can cause small particles and natural colloidal particles in the water to condense into
large flocs, which can be removed from the water. Therefore, it is used as a coagulant for water supply and wastewater;
3. Used as a turbid water purifier, as well as a precipitator, color fixative, filler, etc. Used as a raw material (astringent)
for anti sweat cosmetics in cosmetics;
4. In the fire protection industry, foam extinguishing agent is composed of baking soda and foaming agent;
5. Analytical reagent, mordant, tanning agent, oil decolorizing agent, wood preservative;
6. Stabilizers for albumin pasteurization (including liquid or frozen whole eggs, protein or egg yolk);
7. It can be used as raw material to produce artificial gemstones, high-grade ammonium alum and other aluminate;
8. In the fuel industry, it serves as a precipitator in the production of chrome yellow and lake dyes, while also serving as afixing and filling agent.
Dec-18-24

Urolithin A

$10
MOQ: 100  Kilograms
Sample Available
Supplier From North York, Ontario, Canada
 Inquire Now  
Product Name: Urolithin A
Other Name:
Molecular Formula: C13H8O4
Molecular Weight: 228.2
Appearance: Off-white to light grey powder
Purity: 98%
CAS NO.: 1143-70-0
EINECS No.: 1592732-453-0

Urolithin A is a metabolite of ellagic acid. It is produced by the body after you ingest compounds found in particularly high concentration in pomegranates (particularly the bitter components such as the skin and seeds) and can help recycle defective mitochondria. Since it is a metabolite that results from the transformation of the tannins in pomegranate by gut bacteria, it can be classified as a postbiotic.
551 Industrial Processes Suppliers
Short on time? Let Industrial Processes sellers contact you.
See what buyers and suppliers are discussing in Industrial Processes import export community