Find Verified Electric Panel Meters Suppliers, Manufacturers and Wholesalers

M...EK
Wire rope hoist with monorail trolley and low headroom M...ED
Wire rope hoist with double-rail trolley
Capacity 1000 - 16 000 kg 3200 - 32 000 kg
(special executions - up to 100 000 kg)
Reeving 2/1; 4/1; 4/2 2/1; 4/1; 4/2
(special executions - 6/1; 8/2; 2x4/1)
Lifting height 5,5 - 40 m 5,5 - 44 m
Lifting speed 2,5 - 12 m/min
(special executions - up to 16 m/min)
speed ratio - 1:6; 1:4 1, 2 - 12 m/min
(special executions - 16 m/min)
speed ratio - 1:4; 1:6
Troley speed 12, 15, 20, 24, 30, 38 m/min
speed ratio - 1:4; 1:3 12, 16, 20, 25 m/min
speed ratio - 1:4; 1:3
Geuge 1000 - 2800

Technical data
Type Rated output Basic supply Duty cycle Parameters at rated output starting characteristics weight
P1 U S Nn In Cosφ Is Ms Mmax
Kw Hp V - Min-1 A - A Nm Nm Kg
2p=2
A90ll-2ksr 5.5 7.5 230/400 S6-40% 2900 15.7/9.1 0.88 23 21 28.4 25.5
A90lx-2ksr 5.5 7.5 230/400 S1 2800 19.6/11.3 0.93 53 30 38
A100lk-2ksr 5.5 7.5 230/400 S6-40% 2820 11.5/6.6 0.82 39 25 30 29.0
2p=4
A90ll-4ksr 4.2 5.6 3x400 S6-40% 1250 6.5 0.92 22 39 39.6 26.0
A100lk-4ksr 4.0 5.6 230/400 S6-40% 1350 10.6/6 0.88 22 30 34 31.0
A100lx-4ksr
A100lx-4kr 8.0 10.7 230/400 S6-40% 1350 23.4/13.5 0.85 47 70 78 39.0
A100l-4ksr
A100l-4ksrs 5.5 7.5 230/400 S6-40% 1350 16/9.3 0.86 35 52 58 35.0
A112m-4ksr 4.8 6.4 400/690 S1 1420 8/4.6 0.86 26 62 73 41.0
The electric motors can also be produced at different basic supply voltages and frequency.


Three phase asynchronous electric motor with built-in electric-magnet brake
Technical data
Type Rated
Output Basic
Supply
Voltage Duty
Cycle Parameters at
Rated output Starting
Characteristics Rated brake
(Stopping) torque Rated output of
Brake electric
Magnet Basic
Supply
Voltage of brake electric
Magnet
P1 U S Nn In Cosφ Is Ms Mmax
Kw Hp V - Min-1 A - A Nm Nm Nm - -
A90lx-2kslb 5.5 7.5 400v/50hz S1 continuous 2800 11.3 0.93 42 38 42 10 50w 98v

Folding electric scooter-bike ES-01-450W
COMPLETE /TEST IN BULGARIA !!
7800 Popovo
1 year warranty
Model ES-01 folding model
Dimensions (L * W * H) 1060 * 590 * 1020 MM
48V / 450W motor
Tire size 800 MM
Max. load capacity 105 KG
Max. speed 20-32KM / H
Battery 48V 12AH lithium
Weight 24 kg
Max. kilometers with one charge 55 KM (depending on load and road conditions)
Climb a slope

Electric cargo tricycle model HF-ET12
COMPLETE IN FACTORY IZOSOFTLTD BULGARIA!!!
COC CERTIFCATE certificate for registration with the Traffic Police for the purpose of permission to travel on the national road network
SUITABLE FOR WAREHOUSE,,WHOLESALE STORE,SOO GARDEN, ANIMAL FARM AND AGRICULTURE BUSINESS !!

1 year warranty
certificate-engine number and vin code
model HF-ET12
size (L * W) 2890 x 1000x 1300mm length x width x height
60V / 45AH battery
motor power 60V 1000W
tire size 4.00-12 with metal wheels
maximum speed 40KM / H
mileage with one charge 60KM
battery charging time 6-8H
maximum load 500KG
total weight with battery 260KG
type of brakes front drum rear drum
The tricycle has the ability to load non-standard cargo as each of the ropes is movable and in manual mode can be used for unloading as a dump truck type.
It is suitable for the field of trade production farming and agriculture also of beekeepers.
Also suitabe for inside area of zoo garden , inside are of production plant.

Product Description

Tunnel polycarbonate greenhouses . The materials used in greenhouses production are certified. The construction is made by hot galvanized steel tube 3/4" with thickness 2.5 mm. The coverage is made of 4 mm. transparent polycarbonate panels with UV protection and lifetime more than 10 years. The greenhouses have been tested and stand up to a strong wind at a speed of 100 km/h and a pressure of 100 kg/m2 (wet snow cover of 30 cm.). The sizes of the produced greenhouses are as following:
- with: from 3 to 8 meters
- height: from 2.10 to 3.50 meters
- length: from 3 to 30 meters

Besides the greenhouses we also produce and supply additional equipment such as hydroponic system, dew point system, water fog system, air condition, ventilation and more

Price of product ( USD price or FOB price) :
Negotiable, depending on the quantity order

Product origin :
Bulgaria

Key Specifications/Special Features :
Location of the product: Bulgaria, Plovdiv city
Delivery terms: Negotiable
Payments terms: LC or TT

Minimum Order Size and Packgaing details :
Minimum Order Size:10 -15 sets
Packaging details: As buyer request

Product Description :
High level exterior doors, two and half times stronger than usual standarts for armored doors.The doors are made of two panels of stainless steel sheets with individual thickness of 1.5 mm or 2.00 mm each. There are C-shaped metal ribs between the panels through the whole door.The space between the ribs is filled with special fire resistant, noise and heat cancelling padding. The body of the door can be covered with a material according to customers’ choosing – paint or MDF panels, all in a variety of colors. The door thickness is 62 mm if it is covered with paint and 80 -90 mm if it covered in MDF panels. Special hinges are used for the doors suspension, that allow the lowering or lifting the door by around 10 mm., even if it has been installed. The company-producer has created a special defensive box inside the door for a lot additional security. The door locking system is placed in that box. The locking system and the number of the locks also can be done under customers’ needs. The doors covered in MDF panels include MDF Laminated Exterior Doors and MDF Veneer Exterior Doors.
The exterior doors are between 620- 900 mm thick and weigh between 70 and 110 kg, depending on the size and materials used for coverage.
There are offered also Double Faced Exterior Doors (different color on every side) and Double Exterior Doors (two doors covering a big opening like a gate).
The door set accessories include door, metal frame, decorative wooden frame, decorative architraves for both sides, locking system, locks, hinges, handles, door viewer, installing bolts.
The door design, size and main specifications are upon customer’s requests.

Price of product ( USD price or FOB price) :
Negotiable, depending on the quantity order

Key Specifications/Special Features :
Location of the product: Bulgaria, Sofia city
Delivery terms: Negotiable
Payments terms: LC or TT

Price Units : Euro per cubic meter

Key Specifications / Special Features:

Hardwood species: Beech, Oak

Length: Customizable

Moisture: Fresh-cut or air-dried upon request

Clean-cut, debarked available on request

Reliable and consistent quality processed and loaded with care

C10MS.10 C10MS.12 C13ST.6 C13ST.8 C13MBT.10 C13MBT.12 C13MBT.14
CAPACITY:
Centers height mm 370 400 400
Swing over bed mm 730 800 800
Swing over cross slide mm 485 540 540
Swing in gap mm 920 1050 1050
Width of bed mm 520 540 540
Distance between mm 1000, 1500, 2000, 1500, 2000, 3150, 1500, 2000, 3150,
centers 3000, 4000 4400, 5000, 6200 4400, 5000, 6200
SPINDLE:
Spindle bore mm 260 315 230 290 260 310 356
Spindle nose DIN /11 DIN/12 160 210 350 410 470
HEAD STOCK:
No. of spindle speeds 12 24 24 18 18
Spindle speed range rpm 8 - 400 6.3 - 850 6.3 - 670 / 6.3 - 315
Main motor power kW 11 (15) 15 (18.5) 15 (18.5)
FEEDS:
Number of feeds 76 88 88
Longitudinal feed range mm/rev 0.02 - 7.02 0.13 - 30.72 0.13 - 30.72
Cross feed range mm/rev 0.01 - 3.53 0.04 - 9.216 0.04 - 9.216
THREADS:
Number of threads 64 62 62
Metric thread range mm 0.5 - 150 1 - 240 1 - 240
Inch thread range tpi 60 - 13/64 60 1/4 60 1/4
Module thread range Module 0.125 - 37.5 0.5 - 120 0.5 - 120
DP thread range DP 240 - 13/16 120 - 1/2 120 - 1/2
CARRIAGE:
Cross slide travel mm 420 420 420
Top slide travel mm 145 200 200
TAIL STOCK:
Quill diameter mm 105 110 (120) 110 (120)
Quill taper Morse No.6 No.6 No.6
Quill travel mm 200 280 280
NET WEIGHT FOR DBC:
1000 mm Kg 4960 5180 - -
1500 mm Kg 5210 5430 4600 5000
2000 mm Kg 5460 5680 5100 5500
3000 mm (3150 mm) Kg 6300 6520 5700 6100
4000 mm (4400 mm) Kg 6820 7040 6500 6900
5000 mm Kg - 6900 7300
6200 mm Kg - 7900 8300.

Drilling capacity in:
- Concrete / steel / non-ferrous metals / wood: 22 / 13 / 22 / 30 mm
- Core cutter (TCT cutter only) in masonry up to: 60 mm
No load rpm: 0-1300 min–1
No load impact rate: 6200 min–1
Weight: 2.6 kg
Power input: 650 W.

Property PE 100MA PE 130MA PE 160MA PE 200MA
Nominal press force: 1000 kN 1300 kN 1600 kN 2000 kN
Carriage strokes: 18, 30, 51, 72, 85, 98, 115, 129, 146, 150 (mm) 19, 25, 38, 60, 82, 102, 120, 140, 155, 165 (mm) 20, 28, 43, 60, 77, 94, 117, 131, 149, 167, 180 (mm) 21, 33, 61, 117, 143, 165, 184, 200, 211, 220 (mm)
Carriage height regulation: 100 (mm) 100 (mm) 100 (mm) 110 (mm)
Maximum number of strokes/min: 65 60 50 45
Distance carriage - table: 400 (mm) 440 (mm) 460 (mm) 520 (mm)
C-Frame depth: 330 (mm) 360 (mm) 400 (mm) 420 (mm)
Working height of the table: 800 (mm) 800 (mm) 800 (mm) 800 (mm)
Distance between the columns: 440 (mm) 490 (mm) 530 (mm) 510 (mm)
Bolster plate dimensions: 1100x660x80 (mm) 1200x660x80 (mm) 1300x780x90 (mm) 1400x800x100 (mm)
Electrical motor power 7.5 (kW) 11 (kW) 15 (kW) 15 (kW)
Power of the auxiliary electrical motor regulating the carriage lifting 0.75 (kW) 0.75 (kW) 0.75 (kW) 0.75 (kW)
Machine weight without tools and accessories: 8600 (kg) 9800 (kg) 14000 (kg) 16000 (kg)
Power supply/frequency/phase ~ 380 V, 50 Hz, 3f ~ 380 V, 50 Hz, 3f ~ 380 V, 50 Hz, 3f ~ 380 V, 50 Hz, 3f
Pneumatic system pressure 5.5 – 6 (bar) 5.5 – 6 (bar) 5.5 – 6 (bar) 5.5 – 6 (bar)
Maximum number of clutches per minute 15 (cl/min) 15 (cl/min) 15 (cl/min) 15 (cl/min)
Maximum weight of the instrument mounted on the carriage: 180 (kg) 300 (kg) 500 (kg) 500 (kg)

General purpose on copy-milling operations in materials of medium to high tensile strength such as steels up to 1300N/mm, cast iron, aluminum, copper and non-ferrous metals.

# Callipers Measuring range of 0-1000 mm;
# With and without fine tunning;
# Material – constructional or stainless steel;
# Mat chromed scale;
# Reading – 0.1 and 0.05 mm.

# Special callipers 3-point vernier calliper;
# 5-point vernier calliper;
# Marking-off vernier calliper;
# Weld seam gauge;
# Other types.

# Vernier depth gauges Measuring range of 0-500 mm;
# Reading 0.1 and 0.05 mm;
# Material – constructional or stainless steel;
# Mat chromed scale.

# Micrometers Measuring range of 0-25; 25-50; 50-75; 75-100 mm;
# Reading – 0.01 mm;
# Measurement reading surface of hard alloys (carbide).
Range 0-25 mm.

# Coordinate small size tables One-coordinate;
# Two-coordinate;
# Three-coordinate;
# Stroke along the coordinate: 0-25 mm

# Measuring stands Type A2 – with magnetic switch at the base;
# Type A4 – with cast-iron base and T-shaped groove;
# Type B3 – with square-riffled table;
# Micrometer holder.

# Smooth gauges Plug gauges – one sided;
# Plug gauges – two sided;
# Snap gauges.

# Thread gauges Thread plug calipers – one sides;
# Thread plug calipers – two sides;
# Thread ring gauges.

# Smooth rings Reference rings;
# Setting rings
Range: 6-150 mm.

# Squares and rulers Flat squares;
# Squares with base;
# Checking rulers;
# Templates.

# Angle gauges Protractor with lock screw
Range 80x120 – 300x500 mm;
# Protractor with sliding rod
Range 120x240 – 300x500 mm Reading - 1°

# Marking-off tools (scribers) Straight scriber – one sided (with knurled handle);
# Bended tip scriber – two sided (with knurled handle);
# Trammel for tracing and marking with small base;
# Vernier caliper with two needles and fine adjustment;
# Height gauge with fine adjustment.

Technical characteristics FU 251M FU 301 FU 321M FU 361 FU 401
Table size mm 250x1120 300x1250 320x1350 360x1500 400x1600
“T” slots – number x size mm 3x14 5x14 5x18 5x18 5x18
Table swivel – left and right (º) 45 45 45 45 45
Longitudinal table travel
- manual mm 820 950 1000
(1250)* 1150
(1250)* 1250
- automatic mm 800 930 980
(1230)* 1130
(1230)* 1230
Cross table travel
- manual mm 280 320 360 360 360
- automatic mm 260 300 340 340 340
Vertical table travel
- manual mm 410 410 460 460 460
- automatic mm 390 390 440 440 440
Max. Distance from table top
to spindle axis mm 440 440 490 490 490
Spindle nose taper ISO 40 40 50 50 50
Number of spindle speeds 18 18 18 18 18
Spindle speed range rpm 40-2000
(50-2500)* 40-2000
(50-2500)* 32-1600
(40-2000)* 32-1600
(40-2000)* 32-1600
(40-2000)*
Number of table feeds 18 18 18 18 18
Table feed rate
- x,y mm/min 12.5-630
(16-800)*
(20-1000)** 12.5-630
(16-800)*
(20-1000)** 12.5-630
(16-800)*
(20-1000)** 12.5-630
(16-800)*
(20-1000)** 12.5-630
(16-800)*
(20-1000)**
- z mm/min 5-262
(7-334)*
(8-415)** 5-262
(7-334)*
(8-415)** 5-262
(7-334)*
(8-415)** 5-262
(7-334)*
(8-415)** 5-262
(7-334)*
(8-415)**
Table rapide traverse mm/min 2500/1040 2500/1040 2500/1040 2500/1040 2500/1040
Main motor power kW 4 5.5 7.5 7.5 7.5
Feed motor power kW 1.5 1.5 2.2 2.2 2.2
Machine weight kg 1975 2025 2850 2900 2925

* - option

Note: All the milling machines could be manufactured with control of the movement of the axes by joystick, and frequency adjustment of the feeds

Technical data OL 220 DG OL 222 DG OL 220 DGH OL 220 DGA
Type
Saw-frame rotation range – left/right Manual
45° - 30° Manual
45° - 30° Semi-automatic
45° - 30° Automatic
45° - 30°
Maximum cut off stock
Cutting at angle 90° mm 240 240 240 240
mm 220 220 220 220
mm 275x200 275x200 275x200 250x200
Cutting at angle 45° mm 200 200 200 200
mm 175 175 175 175
mm 190x120 190x120 190x120 190x120
Cutting at angle 30° mm 130 130 130 130
mm 125 125 125 125
mm 130x80 130x80 130x180 130x80
Material level mm 960 960 960 950
Minimum rest in automatic mode mm x x x 380
Sawing speed m/min 30 / 60 30 / 60 30 / 60 (15 – 70) 30 / 60 (15 – 70)
Saw blade dimensions mm 2940x27x0.9 2940x27x0.9 2940x27x0.9 2940x27x0.9
Stock feeding:
single mm x x x 500
repeatedly mm x x x 1000
Power of:
main motor kW 1.1 / 1.5 1.1 / 1.5 1.1 / 1.5 (2.2) 1.1 / 1.5 (2.2)
cooling motor kW 0.18 0.18 0.18 0.18
hydraulic motor kW x x 0.25 0.75
brush kW x x x 0.09
Capacity of:
hydraulic l 1.5 1.5 6 15
cooling l 15 15 15 15
Overall dimensions (LxWxH): mm 1500x800x1600 1500x800x1600 1500x800x1600 1500x2400x1600
Net weight kg 475 475 500 1200

Turning tools with indexable carbide inserts Cutters with indexable carbide inserts.

Drills with indexable carbide tools High speed steel blanks for lathe tools.

Toolholders, collets and tips Live and dead centers for lathes.

Reduction sleeves Circular saws, hand- and power hacksaw blades.

Multidisk "SIGMA" clutches and brakes .

And many others by customer’s request.

Circular saws
Cutters
Cutter heads
Shank cutters
And many others by customer’s request.

Press is designed for bending of sheet material.

* Operational modes:
* Single
* Free
* Impulse
* Body: welded and heat treated steel structure
* Hydarulic block
* Safety mechanical protection
* Photo cell of the working area
* Mechanical synchronizer
* Mechanized rear limiter
* Four-profile tool
* Visualizer of carriage travel and rear limiter
* El.board with pending control panel

Technical information
Property Pl 100/31 Pl 100/41 Pl 130/31 Pl 130/41
Maximum bending force(kn) 1000 1000 1300 1300
Reverse stroke force (kn) 160 160 210 210
Carriage stroke
Minimum ( mm ) 50 50 50 50
Maxmum ( mm ) 180 180 180 180
Distance from the bending axis to the laterals(mm ) 400 400 400 400
Maximum stroke of the rear stop (mm) 500 500 500 500
Main electric motor power(kw ) 7,5 7,5 11 11
Tank capacity (litres) 160 190 160 190
Overal dimensions :
Length(mm) 3800 4800 3800 4800
Width(mm) 2000 2000 2000 2000
Height (mm) 2650 2650 2650 2650
Weight (kg) 9800 11500 12000 14000.

KT20H
Load-lifting capacity: 1000, 2000 and 2500 kg
Height of lifting: 115 mm
Length of the forks: from 750 up to 1800 mm
Width of the forks: 540, 685 mm

Standard Machine Specification LCC 800 LCC 1000 LCC 1250
CAPACITY:
Centers height mm 410 510 625
Swing over bed mm 890 1090 1320
Max. turning diameter over guideways for lathes with turret head mm 750 750 1000
Swing over cross slide mm 490 690 940
Swing in gap mm 1050 1250 1500
Width of bed mm 700
Distance between centers mm 1500, 3000, 4000, 5000
Max. turning length in chuck and live center for lathes with turret head mm 1150, 2650, 3650, 4650
MAIN SPINDLE:
Spindle bore mm 155
Spindle nose DIN55027 No. 15
Spindle hole internal taper Metric 160
Front bearing diameter mm 200
HEAD STOCK:
Spindle speed in two ranges rpm 2 - 250; 8 - 1000
Main motor power kW 30
Spindle max. torque Nm 5000
FEEDS:
Longitudinal feeds (Z-axis) M/min 10 (max)
Cross feed (X-axis) M/min 10 (max)
Rapid traverse (Z-axis and X-axis) M/min 10 (max)
Crosslide maximum travel mm 525 525 650
Z-axis feed torque N.m. 26.1
X-axis feed torque N.m. 10
CNC SYSTEM
Options HEIDENHAIN, FANUC, SIEMENS, FAGOR
TOOLHOLDER TURRET HEAD
Tool section mm 40 x 40
Diameter of boring bar mm 40
Turret head position number 8 or 12
TAIL STOCK:
Quill diameter mm 125
Quill internal taper Morse No.6
Quill travel mm 250
Tailstock movement Motorized
NET WEIGHT
DBC 3000 mm Kg 8800 9300 9800

Technical Data K5-320 K5-400
Planer
Max. Planer Width mm 320 400
Work Table Length mm 1560 1920
Max. Planing Thickness mm 4 4
Cutter Shaft Speed R/min 5200 5200
Number Of Cutters 3 3
Cutter Shaft Dia. mm 86 86
El. Motor Power kW 2.2 3
Thicknesser
Max. Planer Width mm 320 400
Work Table Length mm 550 690
Max. Planing Thickness mm 180 220
Max. Planing Heigh mm 3 3
Cutter Shaft Speed R/min 5200 5200
Number Of Cutters 3 3
Feeds m/min 8 8
El. Motor Power kW 2.2 3
Boring Device
Table Dimensions mm 400/250 (500) 400/250 (500)
Longitudinal Travel mm 100 (150) 100 (150)
Cross Travel mm 100 (150) 100 (150)
Vertical Travel mm 100 (150) 100 (150)
Max. Drill Dia. mm 16 16
Drill Speed R/min 5200 5200
Spindel Moulder
Spindle Diameter mm 30 (50) 30 (50)
Spindle Speed R/min. 6000 6000
Vertical Stroke of Spindle mm 130 130
Max.Ttool Diameter mm 170 170
Dimensions Of Worktable mm 850 / 450 850 / 450
El. Motor Power kW 2.2 2.2
Circular Saw
Saw Blade Diameter mm 300 300
Saw Blade Speed R/min. 3700 3700
Max. Depth Of Cut mm 85 85
Dimensions Of Worktable mm 850 / 450 850 / 450
Spindle Dia. mm 30 30
El. Motor Power kW 2.2 2.2 or 3
Tenoning carriage
Dimensions of worktable mm 450/750 450/750
Machine dimensions
Net weight of the machine Kg 540 580
Length mm 1600 2000
Width mm 1140 1700
Height mm 1000 1100

Yarrow essential oil is distilled from the white-flowering Achillea millefolium plants. The oil is electric blue in colour with a watery viscosity. The fragrance is fresh, sweet, and grassy, with a touch of camphor.

Harvest time - July - August

Your shipment travels by air, land or sea

Ph METER model PHT004TA is suitable for using in the whole manufacturing cycle of milk products.
Additional options: Transforming pH value in titratable acidity (¦Th, %La, ¦SH, ¦D) in range 0à600 ¦C
The device is suitable to measure:
-super pure, drinking, river and sea water
-aqueous solutions of salts;
-alcoholic solutions of salts;
-acid, bases and other chemically active liquids
-milk, wine, soft carbonated and non-carbonated drinks
-pH of solid substances (cheese, yellow cheese, yogurt) by means of a special pH electrode.


Carrying case

Personalize your wall with our panels. In mottled warm and cool tones, panels are part of our collection. Add a beautiful focal wall to your bedroom, living room, family room etc.

Material: Stone
Series* : 3-2-3-2-3-2/3-5-2-5/5-5-5
Dimensions: 45cm x 15cm x 0,8-1,2cm
Surface: 0,0675 m2
Box: 12 pcs 0,810 m2
Pallet: 38 boxes 30,78 m2 700-750kg
Color: Multicolor

The series of the stones are indicative. We can cut in which dimensions you wish upon request, as long as the sum is 15cm

Personalize your wall with our panels. In mottled warm and cool tones, panels are part of our collection. Add a beautiful focal wall to your bedroom, living room, family room etc.

Material: Marble
Series* : 3-5-2-5/5-5-5
Dimensions: 45cm x 15cm x 0,8-1,2cm
Surface: 0,0675 m2
Box: 12 pcs 0,810 m2
Pallet: 38 boxes 30,78 m2 750-850kg
Color: Semi White

The series of the stones are indicative. We can cut in which dimensions you wish upon request, as long as the sum is 15cm

Personalize your wall with our panels. In mottled warm and cool tones, panels are part of our collection. Add a beautiful focal wall to your bedroom, living room, family room etc.

Material: Stone
Series* : 3-5-2-5/5-5-5
Dimensions: 45cm x 15cm x 0,8-1,2cm
Surface: 0,0675 m2
Box: 13 pcs 0,877 m2
Pallet: 38 boxes 33,326 m2 700-750kg
Color: White

*The series of the stones are indicative. We can cut in which dimensions you wish upon request, as long as the sum is 15cm

Product Description :
High level interior doors made of quality MDF panels.Between the panels there is a wood frame and a noise cancelling and heat preserving filling. The filling also can be solid wood. There are offered two types of MDF doors: Laminated MDF (clean look, sturdy and reliable) and Veneer MDF (sophisticated and heavy look, easy to repair in case of small scratches).The appearance and core of the door may vary greatly according to customers’ needs.
We also offer HDF doors and glazed doors with special strengthening holders for the glass.
Double faced doors are made of aluminum and MDF panels.The face of the door in the bathroom is made of aluminum and has a full size mirror on it, but on the other side it looks like a regular MDF interior. It is perfect if the customer wants all the doors to look the same way, but in the same time he doesn’t want to worry about water and moisture in the bathroom. The door set accessories include door, frame, locks, architraves, hinges and handles (all in any size need).
The door design, size and main specifications are upon customer’s requests.

Price of product ( USD price or FOB price) :
Negotiable, depending on the quantity order

Product origin :
Bulgaria

Key Specifications/Special Features :
Minimum Order Size : 100 sets
Packaging details: As buyer request

Personalize your wall with our panels. In mottled warm and cool tones, panels are part of our collection. Add a beautiful focal wall to your bedroom, living room, family room etc.

Material: Stone
Series* : 3-2-3-2-3-2/3-5-2-5/5-5-5
Dimensions: 45cm x 15cm x 0,8-1,2cm
Surface: 0,0675 m2
Box: 13 pcs 0,877 m2
Pallet: 38 boxes 33,326 m2 700-750kg
Color: Green/Black/Yellow

The series of the stones are indicative. We can cut in which dimensions you wish upon request, as long as the sum is 15cm

Personalize your wall with our panels. In mottled warm and cool tones, panels are part of our collection. Add a beautiful focal wall to your bedroom, living room, family room etc.

Material: Marble
Series* : 3-2-3-2-3-2/5-5-5
Dimensions: 45cm x 15cm x 0,8-1,2cm
Surface: 0,0675 m2
Box: 10 pcs 0,675 m2
Pallet: 38 boxes 25,65 m2 750-850kg
Color: White

The series of the stones are indicative. We can cut in which dimensions you wish upon request, as long as the sum is 15cm

Personalize your wall with our panels. In mottled warm and cool tones, panels are part of our collection. Add a beautiful focal wall to your bedroom, living room, family room etc.

Material: Stone
Series* : /3-5-2-5/5-5-5
Dimensions: 45cm x 15cm x 0,8-1,2cm
Color: Yellow

The series of the stones are indicative. We can cut in which dimensions you wish upon request, as long as the sum is 15cm

The company - a manufacturer from Russia
Three-layer formwork panels
We bring to your attention an analogue in the market of a three-layer formwork panel!
Product with a higher quality than a three-layer panel.
The upper and lower layer of the shield is made of birch plywood (exterior - WBP)6 mm thick, the middle layer is made of glued softwood lamellas (pine) 15 mm thick.
Coating - black film 120 g / m2
Glue - Waterproof WBP
Warehouse - Varna. Bulgaria
We offer wooden formwork H20 beams, plywood laminated from birch

Hello,

We can offer you solar panels $0.27/watt.
5000 watts: $1500.

Monocrystalline solar panels.
MOQ: 1 panel/sample: 250 wat/$115. T/T, W/U.
Total price + shipping to US: $159.95.
Max: 100,000 watts/month, $0.27/watt.

Natural Limestone
The limestone is a sedimentary rock composed of the mineral calcite, a form of calcium carbonate. For the first time the limestone is classified by Robert L. Folk and Robert J.Duham.

Generally limestone is classified in three types:

Regular limestone - used as a construction material or yielding lime and cement
Shell stone - one can distinguish inside it shell residues of various species. Because of its beautiful aesthetics it is used mainly for panelling walls, facades, fountains etc.
Chalk â?? this type of limestone is very soft and it is mainly used for the chalk production.
The limestone is widely used in architecture. Many landmarks across the world, including the Great Pyramid and its associated complex in Giza, Egypt, are made of limestone. So many buildings in Kingston, Ontario, Canada were constructed from it that it is nicknamed the 'Limestone City'. In the late 19th and early 20th centuries train stations, banks, big stores and other structures from that era are normally made of limestone.

Vratza Limestone - High Quality Limestone from Bulgaria
Starting back in the 19th century, Vratza limestone is mined in the Northern Bed of Mezdra syncline. It is a calcite lime with comparatively high substance of quartz.

Vratza limestone is a type of natural Bulgarian limestone, that has unique features â?? it is extremely weather-resistant, easy to process and possesses rare aesthetic qualities. These features makes it a perfect material for outdoor application â?? outdoor, paving, cladding and decorations, as well as for interior use like limestone fireplaces, interiour decorations, limestone staircases and furniture.

If we take a closer look at the facades of the old classical buildings, we would find out the features of a compact, homogenous stone that is impressive with its warm creamy colour â?? rain- and cold-resistant throughout time. Vratza limestone is an excellent building stone for humid regions. This type of limestone is hard enough to resist weathering but usually soft enough to be processed (cut and carved) by stonemasons.

Tests show that in terms of strength and frost resistance Vratza limestone exceeds the other limestone types.

Everything made from Vratza limestone
Beautiful, durable throughout time and equally suitable for open air, as well as for closed spaces, Vratza limestone is the excellent choice for everyone that keeps quality and luxurious appearance at high esteem.
In its capacity of leader in delivering and processing this unique natural stone, we offer extensive range of items made from Vratza stone, including tailor-made solutions in full conformity with the wishes and needs of our clients.

Natural Limestone
The limestone is a sedimentary rock composed of the mineral calcite, a form of calcium carbonate. For the first time the limestone is classified by Robert L. Folk and Robert J.Duham.

Generally limestone is classified in three types:

Regular limestone - used as a construction material or yielding lime and cement
Shell stone - one can distinguish inside it shell residues of various species. Because of its beautiful aesthetics it is used mainly for panelling walls, facades, fountains etc.
Chalk â?? this type of limestone is very soft and it is mainly used for the chalk production.
The limestone is widely used in architecture. Many landmarks across the world, including the Great Pyramid and its associated complex in Giza, Egypt, are made of limestone. So many buildings in Kingston, Ontario, Canada were constructed from it that it is nicknamed the 'Limestone City'. In the late 19th and early 20th centuries train stations, banks, big stores and other structures from that era are normally made of limestone.

Vratza Limestone - High Quality Limestone from Bulgaria
Starting back in the 19th century, Vratza limestone is mined in the Northern Bed of Mezdra syncline. It is a calcite lime with comparatively high substance of quartz.

Vratza limestone is a type of natural Bulgarian limestone, that has unique features â?? it is extremely weather-resistant, easy to process and possesses rare aesthetic qualities. These features makes it a perfect material for outdoor application â?? outdoor, paving, cladding and decorations, as well as for interior use like limestone fireplaces, interiour decorations, limestone staircases and furniture.

If we take a closer look at the facades of the old classical buildings, we would find out the features of a compact, homogenous stone that is impressive with its warm creamy colour â?? rain- and cold-resistant throughout time. Vratza limestone is an excellent building stone for humid regions. This type of limestone is hard enough to resist weathering but usually soft enough to be processed (cut and carved) by stonemasons.

Tests show that in terms of strength and frost resistance Vratza limestone exceeds the other limestone types.

Everything made from Vratza limestone
Beautiful, durable throughout time and equally suitable for open air, as well as for closed spaces, Vratza limestone is the excellent choice for everyone that keeps quality and luxurious appearance at high esteem.
In its capacity of leader in delivering and processing this unique natural stone, we offer extensive range of items made from Vratza stone, including tailor-made solutions in full conformity with the wishes and needs of our clients.

The world's first water made for optimum nutrition. High quality mountain spring with 7.2 pH, naturally purified water and again completely naturally enriched.
Unique filtering method with High pulse-silver ionization that allows the uniform dispersion of silver ions in the water, nearly 100 micrograms per liter, value approved by The World health organization as a product for everyday use.
Additionally the water is filtrated with the Zeolite and the Shungit minerals, the atomic structure of which allows them to capture heavy metals, bacteria and microbes, but not only. They also give off iron, zinc, and magnesium into the water.

Our water is unique bouquet of different natural processes so in the end we have the best water in the world, with the best nutrition.

Hello,
We have gauze. Total 560 000 meters in stock.
Width: 1 meter.
Lenght: 1 meter.
The price is FOB ˆ 0,26 euro per m./metric m./
Min. Order Quantity - 50 000 m.
Origin: European Union.

Delivery time depends on the location of delivery. Please specify the port and we will tell you the cost of shipping and delivery time. It is possible to SGS inspection or you can visit and inspect the goods. Payment method: After signing the contract and proforma invoice 30% T/T in advance and the remainder after sending the original B/L, loading photos and other supporting documents or L/C at sight.
Our registration company number is VAT: BG203126230
EORI number: BG203126230ZZZZ0

Hello,

We have in stock 200000 m. Cotton Fabric.
width: 90 cm
The price is FOB port VARNA/BULGARIA ˆ1,78 euro per KG. or ˆ0,56 euro per m./metric meter/
Min. Order Quantity - 10000 m.
The fabric is new. Origin: European Union/BULGARIA.
Delivery time depends on the location of delivery. Please specify the port and we will tell you the cost of shipping and delivery time. It is possible to SGS inspection or you can visit and inspect the goods. Payment method: After signing the contract and proforma invoice 30% T/T in advance and the remainder after sending the original B/L, loading photos and other supporting documents or L/C at sight.

We have in stock 400000 m. 100% Polyester Fabric.
width: 80 cm
The price is FOB port VARNA/BULGARIA ˆ6 euro per KG or ˆ0,50 euro per m./metric meter/
Min. Order Quantity - 10000 m.
The fabric is new. Origin: European Union.

Delivery time depends on the location of delivery. Please specify the port and we will tell you the cost of shipping and delivery time. It is possible to SGS inspection or you can visit and inspect the goods. Payment method: After signing the contract and proforma invoice 30% T/T in advance and the remainder after sending the original B/L, loading photos and other supporting documents or L/C at sight.
Our registration company number is VAT: BG203126230
EORI number: BG203126230ZZZZ0

Hello!

We have in stock 152000 m. Cotton Fabric.
width: 90 cm
The price is FOB port VARNA/BULGARIA 0,99 euro per m./metric meter
Min. Order Quantity - 10000 m.
The fabric is new. Origin: European Union.

Delivery time depends on the location of delivery. Please specify the port and we will tell you the cost of shipping and delivery time. It is possible to SGS inspection or you can visit and inspect the goods. Payment method: After signing the contract and proforma invoice 30% T/T in advance and the remaining be when we shipped the goods in the container and the container is sailed and after sending the original B/L, loading photos and other supporting documents or L/C at sight.
Our registration company number is VAT: BG203126230
EORI number: BG203126230ZZZZ0