Three-Layer Formwork Panels

This machine is perfectly combined two

Different-model machines together, this can

Save the space and also is easy to operate.

The two models are chose according to

Customers'need.
It consists of feeding platform, main

Molding core, shearing mechanism, hydraulic

Station, computer control cabinet, high

Precision counter and so on.
A.Function and feature
This producing line uses galvanized

Steel sheet, colored armor plate or aluminum

Plate as the material plate. The products of

It are used as the roof tile and wall panel

Outside of building, to increase the beauty

And durability of the roof tile and wall

Panel. This line has no limit on processing

Length; you can set several different data on

The computer control cabinet according to your

Own need. After pressing the button "confirm",

The machine can produce the panel

Automatically according to the set data. The

Molding plate surface smooth and not easy to

Be marked when it is being stamped. So it is

Easy to install. The product conforms to

National steel construction building standard.
B.Features of this producing line:
Lower cost
High efficiency
Reliable working
Low energy consumption
D.Equipment parts

Feeding platform

Automatic shearing system

Hydraulic system

Computer control system (imported computer)

High-precision automatic counter

Productivity: 10-18m/min, 3500 m2/8hs

Suitable process material: colored steel

Sheet, aluminium steel sheet, and galvanized

Steel sheet

E.Optional equipment:

Manual uncoiler frame in different tons

Hydraulic automatic uncoiler

F.Working space and workman for the equipment


Ground-level land
5t overhead travelling crane


Space for storing the material


Space for laying the machine
Road for vehicle moving
Workman: 2, operator and porter

H20 Beams can be used in any kind of formwork where you would use 4x6 lumber. They have a high load capacity throughout their length and are easy to handle.
Product Description
Strong, lightweight and easy to assemble.
H20 Beams can be used in any kind of formwork where you would use 4x6 lumber. They have a high load capacity throughout their length and are easy to handle.
Wooden beam for formwork, consisting of an upper and lower wing and featuring a central section consisting of three layers. The union is designed as a notched and glued joint.
Heads
Fir wood of the highest quality, calibrated with levelled edges and with finger type joints along their length.
Webs
Of a three-layer board with a thickness of 27 mm.
Joint
Notched, finger-type joint between core and wings, throughout their length. High-frequency, high strength gluing.
Anti-humidity treatment
Protective paintwork throughout the beam.
Advantages
Fushi H20 Beam is widely popular for good reason.
Strength and Safety
Dimensional stability and recovery capacity after application of load. High load capacity throughout their length. Protection against humidity, knocks and splintering.
Lightness
Easy handling and quick assembly. Minimum weight.
Economical
Can be used many times. Good ratio between price and uses. Easy storage.
Adaptability
Ideal for use with 25mm formwork board. Supports can be placed at any point. Can be used in any kind of formwork.

ZFORM 120 Steel Framed Wall Formwork
ZOLO ZFORM 120 Steel Framed Panel Wall Formwork is mainly used for wall casting, and the standard version has a total of 5 different heights and 6 different widths of panels. For pouring in special positions the combination of corner panels and adjustable panels can be used to achieve the pouring requirements. The connection of the panels is joint by a adjustbale alignment clamp, which is handy and rapid, and at the same time greatly reduces the investment of manpower and time.

Features
1. Perfect for the construction of all kinds of vertical concrete structures, both in building construction and civil works (walls, columns, abutments, footings.)

2. Highly efficient with minimum labour costs and erection time.

3. Consisting of panels that are joined with clamps to make sets. With effective and safe accessories in any type of application.

4. Designed to withstand high concrete pressures

5. The steel frame is highly strengthened, and the wall formwork can bear lateral pressure 60 KN/m2 while the column formwork can bear 80 KN /m2.

6. The plywood is screwed on from the back when connecting frame and plywood, so the surface of the fnished concrete is perfect

7.The formwork series are a complete system with a full set of accessories, and can be set up flexibly according to project demand.

Modern climbing formwork systems consist of large wall forms mounted on climbing scaffolds. As part of the first concrete pour, the climbing supports are attached to pre-set anchor bolts. This ensures the transfer of wind and constant loads from the wall formwork and supports. The formwork also used two climbing brackets to create a working platform to align and support the panels.



After pouring the concrete, the lifting boots and screws were installed. Both the climbing platform and the formwork were then lifted to a new suspension point for the next pouring cycle.

Flat tie is an accessories of aluminum formwork system, been used to fix the position of the aluminum formwork panel when making concrete parts, mostly form a fastening system together with wedge pin.

We have ability to design and produce flat tie in any shape and size, any special requirements are welcomed.

Overview
With the increasing awareness of environmental protection and sustainable development, the concrete construction site is also an urgent need for a kind of environmentally friendly, reusable, easy-to-operate building formwork to replace the traditional wooden formwork and steel formwork, ZPLASTKâ?¢80 Modular Plastic Formwork with the help of ABS plastic is unique high-strength, low weight, environmentally friendly features, it already start a new era of construction.

ZPLASTKâ?¢80 Modular Plastic Formwork is one type of rapid, handy, modular and economical solution for concrete slabs, columns and walls. It can make your job easy.

Features
1. Various size specifications, flexible combination to adapt to different concrete structures

2. The slab and wall can be cast in a single pour.

3. The weight of the largest size formwork panel is about 11 kilograms, which can be easily handled by workers. The panels are simply connected by locking handles so that they can be operated by ordinary workers without the need for skilled workers, which greatly improves construction efficiency and reduces labor costs.

4. The concrete surface can reach the level of fair-faced concrete, with precise dimensions, verticality and flatness greatly superior to that of wooden formwork and steel formwork, saving the cost of secondary plastering.

5. The formwork is completely waterproof, resistant to moisture, does not swell, and does not deform at high temperatures.

6.Under normal use, it can be in circle use at least 100 times.

concrete formwork slab shoring system for construction
We are supplier of shoring formwork for concrete construction.
Our company do scaffolding and formwork shoring business more than 20 years,we exported to almost all of the world.
We have a patent products: Panel-Prop Early Stripping System.The technology is from Canada,we got invention patent in USA,Australia,and registered brand in USA,Canada and European Union.
It includes only panel and prop, Erection and removal are very simple.Average erection or dismantling production speed per man-day is 100M2.We have confidence that it's the most advanced and fastest Early Stripping Shoring System in all of the world.

TECON Modular Formwork mainly consists of AluLITE Formwork, Steel LITE Formwork and Plastic Formwork TP60+.

For any villa project, a low-cost housing project, especially with hundreds of or thousands of houses at the same plan and size, modular column formwork can maximize site productivity and greatly save labour costs.

On some occasions, even with conventional building methods such as bricks and concrete hollow blocks and others., build with rebar and concrete via modular formwork will still benefit you from lead time and total cost per house though the initial investment seems higher than traditional bricks and timbers.

Modular prefab formwork can build wall and slab separately and build wall and slab together in one time pour with customized formwork planning and fabrication. Very timber and even no skilled workers are needed due to their easy to learn assembly sequence.

Advantages of Modular Formwork/Shuttering
The modular formwork system is designed with standardized panels and components to reduce or limit cutting materials on site. This speeds up the entire process and therefore reduces on-site labour. They can also be interchanged with conventional methods. Commercial, civil, and industrial contractors can replace the traditional methods of cast-in-place concrete engineering by using modular formwork systems and quickly achieve one-time casting, thereby minimizing the financial expenditure of labour and materials. By choosing to lease, contractors can gain more benefits in reducing the costs associated with regular procurement. Once the work is completed, this also eliminates the need to recover the purchase cost by reselling the materials.

TECON company offers concrete formwork (shuttering) and scaffolding for projects worldwide with many years of experience in dealing with contractors, builders & architects. We are one of the leading formwork manufacturers and suppliers of concrete shuttering scaffolding concrete formwork engineering from China.