Find Verified Ships Used Ships Boats Spare Parts Suppliers, Manufacturers and Wholesalers

LOADS OF BENEFITS: - Notched for interior and exterior circumferences. Primarily used to protect various roll form products such as steel, aluminum, and paper rolls, etc.

Prevents product damage that can occur during shipping and handling

Custom lengths to meet your specific application

Optional printing of brand name and handling instructions

LOADS OF BENEFITS: - Notched for interior and exterior circumferences. Primarily used to protect various roll form products such as steel, aluminum, and paper rolls, etc.

Prevents product damage that can occur during shipping and handling

Custom lengths to meet your specific application

Optional printing of brand name and handling instructions

Grog Or Refracory Bricks Are Available From Bahrain, 500 Tons Every Month

Bitumen emulsion is a mixture of fine droplets of bitumen and water. But as the bitumen is a petroleum product it doesn’t mix with water and as it is sticky in nature, it doesn’t easily gets disintegrated into fine droplets. To overcome this problem an emulsifier is used. Emulsifier can be defined as a surface-active agent. Emulsifier keeps the bitumen in its fine droplet state by disallowing it to mix with other droplets. As the droplets are very fine they suspend in water.

Therefore, bitumen emulsion is a dispersed liquid consisting of three products, i.e. water, bitumen and emulsion.

Bitumen emulsion is a mixture of fine droplets of bitumen and water. But as the bitumen is a petroleum product it doesn’t mix with water and as it is sticky in nature, it doesn’t easily gets disintegrated into fine droplets. To overcome this problem an emulsifier is used. Emulsifier can be defined as a surface-active agent. Emulsifier keeps the bitumen in its fine droplet state by disallowing it to mix with other droplets. As the droplets are very fine they suspend in water.

Uses
Cationic emulsions may be used at ambient temperatures with aggregates, which need not be completely dry. Emulsions are less hazardous to use and can be applied in a wider range of conditions. Advantages
a) Cationic emulsions may be used at ambient temperatures with aggregates, which need not be completely dry.
b) Lower costs are incurred due to a considerable saving on fuel for heating purposes.

c) Operating at lower temperatures for cold mixing gives a greater margin of safety, even though these emulsions may contain fluxing oil.
d) Not only may cold mix be stockpiled for long periods, but it may also be packaged in small containers and stored. This facilitates the treatment of very small areas quickly, cleanly and economically. Disadvantages
A regular water supply is required and this can be a great problem in very hot countries, where water can be in very short supply.


Price of Product (USD) : 432

Product Origin : Merco W.L.L Bahrain

Key Specifications / Special Features :

Type Viscosity  @25°C Penetration & Solubility Residue
Tack Coat K1- 40 25 Max 60- 200 & (97.5) 38%
Rapid Setting RS-1K 20-50 60- 200 & (97.5) 50%
Rapid Setting K1-60 -NA & (97.5) 57%
Rapid Setting CRS-160- 200 & (97.5) 60%
Rapid Setting CRS-2-60- 200 & (97.5) 65%
Rapid Setting K1-70NA & (97.5) 67%
Medium Setting K2-NA & (97.5)57%
Medium Settng CMS 2-60- 200 & (97.5) 65%
Slow Setting K3 20- 100 60- 200 & (97.5) 56%
Slow Setting CSS-1 20- 100 60- 200 & (97.5) 57%


Minimum Order size and packgaing detail

16.00(=/-3%) Metric tons per 20 Foot Container. 200 kgs(+/-3kgs) in one drum.Total no of drums in 1 container 80

Mill Scale is a waste material rich in iron mostly produced in steel plants.


Price of Product (USD) : 65

Product Origin : Merco W.L.L Bahrain

Chemical Analyses

Parameters Results
Total Iron (T.Fe) 70.81%
Silica (Sio2) 0.52%
Calcium Oxide (c2O) 0.69%
Alumina (Al2O3) 0.51%
Phosphorus (P) 0.0094%
Sulphur (S) 0.009%
Manganese (Mn) 0.89%
Chromium (Cr) 0.015%
Zinc (ZN)- 0.16%
Titanium (Ti)- 0.065%
Moisture(H2O)- 2.17%


Minimum Order size and packgaing detail : loose paking with polythene sheets.

Information on basic physical and chemical properties

a) AppearanceLight yellow formed solid
b) OdourFaint but characteristic rotten egg
c) Odour Threshold0.47ppb hydrogen sulphide
d) pHNot applicable
e) Melting point/freezing point118-120°C
f) Initial boiling point and boiling range-444.7°C
g) Flash point168-207°C (molten sulfur)
h) Evaporation rateNo data available.
i) Flammability (solid, gas)Combustible solid
j) Upper/lower flammability or explosive limitsUpper explosion limit 35g/m3 % sulfur dust in air Lower explosion limit 1400g/m3 % sulfur dust in air
k) Vapour pressureNot applicable
l) Vapour densityNot applicable
m) Relative density1.92-2.07
n) Water solubilityInsoluble in water
o) Partition coefficient: (n- octanol/water)No data available
p) Auto-ignition temperature 248-161°C (molten sulfur), 190°C (sulfur dust cloud)
q) Decomposition temperatureNo data available
r) Viscosity 8 mm2/s at 140°C (molten sulfur)
s) Explosive properties None NONE
t) Oxidizing properties None NONE


Price of Product (USD) : 67

Product Origin : Merco W.L.L Bahrain

Anode butts are the residual electrode left in the electrode holder at the end of electrolysis with prebaked carbon anodes. The anode carbon is being consumed by ohmic resistive heat and electrolytic oxidation. However the part of anode just above the melt is being continuously subjected to high temperature reactions with fluoride melt and atmospheric oxidation, which ultimately results in impurities left in the discarded anode butts.At the end of their use, the left over part of the anode (called butts) are crushed and recycled to produce new anodes. However, while recycling the butts the built-up of sodium concentration is closely checked and controlled in order to avoid harmful effect of excess sodium in newly formed anodes. Good quality anodes should be oxidation resistant in gaseous environment in order to minimize oxidation on the expose surface (C + O2 2CO) [19]

Price of Product (USD) : 300

Product Origin : MERCO W.L.L BAHRAIN

Iron oxides are widely used as inexpensive, durable pigments in paints, coatings and colored concretes.

Product Origin : Merco W.L.L Bahrain

Actual Chemical Analysis Results :
Actual results tested by a competent laboratory on sample taken at load port with the following findings
Specifications Results
Fe 66.40 PCT
FeO 13.12 PCT
Sio2 2.79 PCT
CaO 1.27PCT
Al2O3 0.49 PCT
P 0..32 PCT
S 0.035 PCT
CaO : Sio2 0.46
Moisture 0.12 PCT
Size 0-3 MM 37.20 PCT
3-5MM 26.60 PCT
5-10MM 36.20 PCT

Direct reduced iron (DRI), also called sponge iron, is produced from the direct reduction of iron ... of the process is to drive off the oxygen contained in various forms of iron ore.

Price of product ( USD price or FOB price) : 300

Product origin : Kingdom Of Bahrain

Key Specifications/Special Features :

Al2O3+SiO2 5.90%Max
Mgo + CaO 2.00% Max
Phosphorous 0.07% Max
Sulfur 0.01 Max

Minimum Order Size and Packgaing details :

MOQ: 1000MT To Max 10000 MT

Packaging: Loose In Continers

Bitumen penetration grade 60/70 means the penetration value is in the range 60 to 70 at standard test conditions which commonly used as a Paving Grade. Bitumen is applicable for the production of hot mix asphalt for bases and pavements and for road construction.Penetration Grade Bitumen supplied by MERCO Bahrain. Its penetration grade ( the measure of bitumen hardness) is between 60 to 70. Bitumen is specified by the penetration and softening point test.Penetration determines the hardness of bitumen by measuring the depth to which a standard loaded the needle will vertically penetrate in 5 seconds, in a sample of bitumen maintained at a temperature of 25 degrees Celsius.

Price of Product (USD) : 503

Product Origin : Merco W.L.L Bahrain

Key Specifications / Special Features :

Test Name Test Method Unit Result
Specific Gravity @25°C ASTM D70 kg/cm³ 1.01-1.06
Penetration @25°C ASTM D5 mm/10 60/70
Softening Point °C ASTM D36 °C 49/56
Ductility @25°C ASTM D113 cm 100 min
Loss on Heating (wt%) ASTM D6 wt% 0.2 max
Drop in Penetration after heating % ASTM D5-D6 % 20 max
Flash Point °C ASTM D92 °C 232 min
Solubility in Trichlorethylene ASTM D2042 wt% 99 min
Spot Test A.A.S.H.O.T102 Negative

Minimum Order size and packgaing detail

we will provide both 20FT as well as 40FT Containers (200 Liter per drum both open as well as closed top Drums), also in 1 MT flexi bags. Steel Drum Sizes
Drum Size 200 kg Drum
Height 980mm
Diameter 520 550mm
Thickness 0.6 –0.8mm

Cutback Bitumen ( Liquid Bitumen ) is Bitumen that is dissolved in a solvent . Typical solvents include Naptha, gasoline and kerosene, white spirit etc. The type of solvent controls the curing time while the amount determines the viscosity of the Cutback Bitumen.

The advantage Cutbacks have over Emulsions is a much higher residual Bitumen percent, typically over 80% compares with over 40-65% for Bitumen emulsions. The result is more Bitumen left on the roadway after curing, for the same volume of binder applied.

Application
Cutback bitumen’s suitable for primer sealing can also be used in the manufacture ofpre-mix asphalt, which is used in patch repairs.Cutback bitumen’s are used extensively in sprayed sealingapplications, particularly in cooler weather where theyprovide improved initial stone retention due to their

Price of Product (USD) : 503

Product Origin : Merco W.L.L Bahrain

Key Specifications / Special Features :

Cutback Classification

Cutbacks are divided into two classifications, Rapid-Curing (RC) and Medium-Curing (MC) depending on the solvent used. They are further defined by a number which indicates the minimum kinematic viscosity (fluidity) of the cutback.

Grades & Properties

Grade Curing Speed Viscosity Penetration of Residue
MC 30 Medium 30-60 120- 150
MC 70 Medium 70-140 120- 150
MC 250 Medium 250- 500 120- 150
MC 800 Medium 800- 1600 120- 150
MC 3000 Medium 3000- 6000 120- 150
RC 70 Rapid 70-140 80- 120
RC 250 Rapid 250-500 80- 120
RC 800 Rapid 800- 1600 80- 120
RC 3000 Rapid 3000- 6000 80- 120


Minimum Order size and packgaing detail

Palletizing is required for Cutback Bitumen & Emulsions -200kg drums shall be secured as 4 drums per pallet.

Marine Spare Parts
AIRCRAFT SPARE PARTS
RAW METERIAL
INSERTS AND HOLDERS
FLANGES
PIPES
VALVES
DUCTILE IRON
DUCTILE
SAFTEY PRODUCTS
EMBRODERY WORKS
+973 37515705
SAUDI ARAMCO APPROVED
KSA AND BAHRAIN

Quality
Our wire mesh is made with precise mesh opening and with specific controls in our welding process we ensure the best quality welding. Each lots are identified with batch and lot numbers and These panels are checked for chemical composition of the raw material; mesh opening and wire diameter tolerances and welding and shearing strength before it is delivered to our customer. This helps us to deliver the wire mesh panels exactly as per customer requirements.
Coating
Welded wire mesh in steel is either hot dip galvanized or powder coated according to the requirements of the customers. Pre-galvanized wires are used to make the hot dip galvanized welded wire mesh and in some cases the mesh is made in mild steel and then hot dip galvanized according to the requirements of the customers.
Inventory/ Shipment
With wide range of welded wire mesh products manufactured and supplied in the above mesh specifications we maintain minimum stock level on our mesh products which allow us to pack and ship the goods immediately upon order confirmation. This immediate shipment concept works very well in many of the critical applications where by our customers are immensely benefit as this helps in reducing our customers down time.

With very narrow openings and with gratings which can withstand heavy payload Quality wire is specialized in supplying the same with extreme precision and best quality. Narrow opening gratings are very difficult to make as with close weldings there is extreme stress on the material there by the gratings tend to bend. With special controls and specialized after production process we achieve a obsolute flat panel even with such narrow openings. Stainless Steel and other high end alloys require precise control during process and we have specialized welding machines which produces the gratings with absolutely zero defects. Special cleaning process is used in making the grating panels there by we achieve the best surface finish on the gratings after welding. Our custom made gratings are very popular in the filtration process and used as Catalyst bed in the refinery and other oil & gas industries. Besides offering the gratings our engineers are capable of designing specific model gratings which can withstand high load and also design gratings for high pressure drop applications.
Quality
Our Gratings are made with precise mesh opening and with specific controls in our welding process we ensure the best quality welding. Each lots are identified with batch and lot numbers and These panels are checked for chemical composition of the raw material ; mesh opening and dimension tolerances and welding and shearing strength before it is delivered to our customer. This helps us to deliver the Grating panels exactly as per customer requirements.
Coating
Gratings in steel are hot dip galvanized or powder coated according to the requirements of the customers. Stainless steel and other copper nickel gratings are pickled and passivated according to the customer requirements.
Inventory/Shipment
With wide range of Grating products manufactured and supplied in various patterns and specifications we maintain minimum stock level on some of our fast moving products which allow us to pack and ship the goods immediately upon order confirmation. This immediate shipment concept works very well in many of the critical applications where by our customers are immensely benefit as this helps in reducing our customers down time.

We are the leading manufacturer, exporter and supplier of Oxygen Plants, Nitrogen Plants, Air Seperator Plants, Acetylene Plants, Nitrous Oxide Plants and Carbon Di-oxide Plants. O�ered in various capacities, sizes and other related speci�cations as per the preferences laid by our clients these products are manufactured by our skilled industry experts as per the set international standards. We also manufacture and export related Allied Equipment's and spares for the above stated Plants.


PROCESS DESCRIPTIONS:
Step1: Compression of Atmospheric Air Step
2: Puri�cation of Air Step
3: Cooling of Air Step
4: Separation of Liquid Air into Oxygen and Nitrogen. Step
5: Compression / Withdrawal and Filling of Oxygen and Nitrogen by latest liquid oxygen pump technology to �ll bone dry high purity oxygen in Cylinders.

USES OF OXYGEN:
Oxygen is obtained on a commercial scale through the liquefaction and desolation of ambient air at air separation
plants.
Oxygen (O2) is a colorless and odorless gas. It is vital for most life forms on earth. We absorb oxygen through the air we breathe. Medical oxygen is essential in hospital and clinical care for resuscitator and surgery and for various therapies. It is also mixed with nitrogen or helium to create underwater diving mixtures.

FOR DETAILS:
Please contact me for further details related to operation, installation and plant design according to client user requirements.
Contact: BABAR SALEEM / Email: bew-uae@brooklyn-bh.com

Bitumen 60/70 shall be 50 % and Kerosine 50% Packed in Flexi Tank

Test Parameters Method Unit Result
Color Water white
Density 76.5
Flash <20

Distillation Range
IBP 40
10 % Recovered 'C 60
20 % Recovered 'C 80
30 % Recovered 'C 105
40 % Recovered 'C 115
50 % Recovered 'C 135
60 % Recovered 'C 150
70 % Recovered 'C 165
80 % Recovered 'C 200
90 % Recovered 'C 230
FBP 236

Test Parameters Method Unit Result
Color
Density 76.5
Flash <20

Distillation Range
IBP 40
10 % Recovered 'C 60
20 % Recovered 'C 80
30 % Recovered 'C 105
40 % Recovered 'C 115
50 % Recovered 'C 135
60 % Recovered 'C 150
70 % Recovered 'C 165
80 % Recovered 'C 200
90 % Recovered 'C 230
FBP 236

Test Parameters Method Unit Result
Color Light Yellow
Density 0.777 Approx
Flash <23

Distillation Range
IBP 54
10 % Recovered 'C 85
20 % Recovered 'C 110
30 % Recovered 'C 129
40 % Recovered 'C 143
50 % Recovered 'C 158
60 % Recovered 'C 173
70 % Recovered 'C 188
80 % Recovered 'C 207
90 % Recovered 'C 228
FBP 262

Test Parameters Method Unit Result
Color White
Density 0.67
Flash <10

Distillation Range
IBP 54
10 % Recovered 'C 67
20 % Recovered 'C 73
30 % Recovered 'C 79
40 % Recovered 'C 84
50 % Recovered 'C 91
60 % Recovered 'C 102
70 % Recovered 'C 111
80 % Recovered 'C 123
90 % Recovered 'C 131
FBP 158

We have Available in our store ready to ship 20 Tons Sabic HPDE Rasine raw material Food grade for water cap closure production for any more information pls contact us

We have a batch of surplus OEM Peugeot parts for sale.

PEUGEOT MODELS:
206 2012
306 2006
405 2000

We have a batch of surplus OEM Suzuki parts for sale.

SUZUKI MODELS:
ALTO 1998-2010
LIANA 2002-2010
SAMURAI 1988-1996
VITARA 1992-2004

We have a batch of surplus OEM Jaguar parts for sale.

JAGUAR MODEL:
XJ 2010-2019
XJ 2003-2009
X TYPE 2001-2010
S TYPE 1999-2008
XJ 1998-2003
XJ6 1987-1994

ITEM

SUNFLOWER OIL
---------------------------------------------
DESCRIPTION
*Sunflower Oil *1.5 L Ã?? 6 PCS / Ctn / *Private label / *1 Container Ã?? 40ft
---------------------------------------------------------
QTY/CTN / 2,915

PRICE / CTN (USD) / 15.90




organ : Tyrkia


TERMS:

- PRICES TERMS:
- QUANTITY: +/- 10% depend on the container load.
- PAYMENT TERMS: 50% advance after signing the contract, 50% against copy of shipping documents.
- SHIPPING TIME: to be shipping within 50 days from confirming the designs & receiving the advance payment.
- DOCUMENTS APPLIED: Full set bill of loading (3 original); Certificate of origin; Commercial invoice; Packing list.
- All transfers must be from the Buyerâ??s bank account (000). Transfers through third parties are NOT acceptable.

Available 25 tones lldpe injection grade excellent quality recycled granules. Bahrain origin, ready to ship.

We have 100 tones of Conveyor Rubber Belt currently available to ship. The Conveyor Rubber Belt is offered at market-leading prices, and we guarantee on-time delivery. iv. Available on FOB shipping and LC payment terms. v. If you have this requirement, please contact us directly in our email ID: crownmet@crownbahrain.com with your specifications, delivery location, payment terms and conditions, and other pertinent information. vi. We are delighted to work with authentic buyers from throughout the world in order to establish a long-term business relationship. Export Region: Worldwide from Crown Industries BSC (C), based in Manama, Bahrain, an ISO-certified company that was founded in 1997. We have an excellent reputation in the local and worldwide market because we provide high-quality goods and services.