Find Verified Marine Oil Suppliers, Manufacturers and Wholesalers

We trade in Vegetable edible oils, extra virgin oils, and essential oils, an refers to oil obtained from oilseeds and nuts through extraction processes. Our range of edible oils includes Olive oil, Vegetable Oil, Canola Oil, Coconut Oil, Sunflower Oil, Avocado Oil, Peanut Oil, Sesame Oil, and Extra virgin oils. We ensure that we are your reliable sourcing partner in Flavor & Fragrance and our range of essential oil include Lavender, Peppermint, Lemon, ylang-ylang, Frankincense, Neroli, Bergamot

Base Oil

Bitumen emulsion is a mixture of fine droplets of bitumen and water. But as the bitumen is a petroleum product it doesn’t mix with water and as it is sticky in nature, it doesn’t easily gets disintegrated into fine droplets. To overcome this problem an emulsifier is used. Emulsifier can be defined as a surface-active agent. Emulsifier keeps the bitumen in its fine droplet state by disallowing it to mix with other droplets. As the droplets are very fine they suspend in water.

Therefore, bitumen emulsion is a dispersed liquid consisting of three products, i.e. water, bitumen and emulsion.

Bitumen emulsion is a mixture of fine droplets of bitumen and water. But as the bitumen is a petroleum product it doesn’t mix with water and as it is sticky in nature, it doesn’t easily gets disintegrated into fine droplets. To overcome this problem an emulsifier is used. Emulsifier can be defined as a surface-active agent. Emulsifier keeps the bitumen in its fine droplet state by disallowing it to mix with other droplets. As the droplets are very fine they suspend in water.

Uses
Cationic emulsions may be used at ambient temperatures with aggregates, which need not be completely dry. Emulsions are less hazardous to use and can be applied in a wider range of conditions. Advantages
a) Cationic emulsions may be used at ambient temperatures with aggregates, which need not be completely dry.
b) Lower costs are incurred due to a considerable saving on fuel for heating purposes.

c) Operating at lower temperatures for cold mixing gives a greater margin of safety, even though these emulsions may contain fluxing oil.
d) Not only may cold mix be stockpiled for long periods, but it may also be packaged in small containers and stored. This facilitates the treatment of very small areas quickly, cleanly and economically. Disadvantages
A regular water supply is required and this can be a great problem in very hot countries, where water can be in very short supply.


Price of Product (USD) : 432

Product Origin : Merco W.L.L Bahrain

Key Specifications / Special Features :

Type Viscosity  @25°C Penetration & Solubility Residue
Tack Coat K1- 40 25 Max 60- 200 & (97.5) 38%
Rapid Setting RS-1K 20-50 60- 200 & (97.5) 50%
Rapid Setting K1-60 -NA & (97.5) 57%
Rapid Setting CRS-160- 200 & (97.5) 60%
Rapid Setting CRS-2-60- 200 & (97.5) 65%
Rapid Setting K1-70NA & (97.5) 67%
Medium Setting K2-NA & (97.5)57%
Medium Settng CMS 2-60- 200 & (97.5) 65%
Slow Setting K3 20- 100 60- 200 & (97.5) 56%
Slow Setting CSS-1 20- 100 60- 200 & (97.5) 57%


Minimum Order size and packgaing detail

16.00(=/-3%) Metric tons per 20 Foot Container. 200 kgs(+/-3kgs) in one drum.Total no of drums in 1 container 80

Bitumen penetration grade 60/70 means the penetration value is in the range 60 to 70 at standard test conditions which commonly used as a Paving Grade. Bitumen is applicable for the production of hot mix asphalt for bases and pavements and for road construction.Penetration Grade Bitumen supplied by MERCO Bahrain. Its penetration grade ( the measure of bitumen hardness) is between 60 to 70. Bitumen is specified by the penetration and softening point test.Penetration determines the hardness of bitumen by measuring the depth to which a standard loaded the needle will vertically penetrate in 5 seconds, in a sample of bitumen maintained at a temperature of 25 degrees Celsius.

Price of Product (USD) : 503

Product Origin : Merco W.L.L Bahrain

Key Specifications / Special Features :

Test Name Test Method Unit Result
Specific Gravity @25°C ASTM D70 kg/cm³ 1.01-1.06
Penetration @25°C ASTM D5 mm/10 60/70
Softening Point °C ASTM D36 °C 49/56
Ductility @25°C ASTM D113 cm 100 min
Loss on Heating (wt%) ASTM D6 wt% 0.2 max
Drop in Penetration after heating % ASTM D5-D6 % 20 max
Flash Point °C ASTM D92 °C 232 min
Solubility in Trichlorethylene ASTM D2042 wt% 99 min
Spot Test A.A.S.H.O.T102 Negative

Minimum Order size and packgaing detail

we will provide both 20FT as well as 40FT Containers (200 Liter per drum both open as well as closed top Drums), also in 1 MT flexi bags. Steel Drum Sizes
Drum Size 200 kg Drum
Height 980mm
Diameter 520 550mm
Thickness 0.6 –0.8mm

Cutback Bitumen ( Liquid Bitumen ) is Bitumen that is dissolved in a solvent . Typical solvents include Naptha, gasoline and kerosene, white spirit etc. The type of solvent controls the curing time while the amount determines the viscosity of the Cutback Bitumen.

The advantage Cutbacks have over Emulsions is a much higher residual Bitumen percent, typically over 80% compares with over 40-65% for Bitumen emulsions. The result is more Bitumen left on the roadway after curing, for the same volume of binder applied.

Application
Cutback bitumen’s suitable for primer sealing can also be used in the manufacture ofpre-mix asphalt, which is used in patch repairs.Cutback bitumen’s are used extensively in sprayed sealingapplications, particularly in cooler weather where theyprovide improved initial stone retention due to their

Price of Product (USD) : 503

Product Origin : Merco W.L.L Bahrain

Key Specifications / Special Features :

Cutback Classification

Cutbacks are divided into two classifications, Rapid-Curing (RC) and Medium-Curing (MC) depending on the solvent used. They are further defined by a number which indicates the minimum kinematic viscosity (fluidity) of the cutback.

Grades & Properties

Grade Curing Speed Viscosity Penetration of Residue
MC 30 Medium 30-60 120- 150
MC 70 Medium 70-140 120- 150
MC 250 Medium 250- 500 120- 150
MC 800 Medium 800- 1600 120- 150
MC 3000 Medium 3000- 6000 120- 150
RC 70 Rapid 70-140 80- 120
RC 250 Rapid 250-500 80- 120
RC 800 Rapid 800- 1600 80- 120
RC 3000 Rapid 3000- 6000 80- 120


Minimum Order size and packgaing detail

Palletizing is required for Cutback Bitumen & Emulsions -200kg drums shall be secured as 4 drums per pallet.

Marine Spare Parts
AIRCRAFT SPARE PARTS
RAW METERIAL
INSERTS AND HOLDERS
FLANGES
PIPES
VALVES
DUCTILE IRON
DUCTILE
SAFTEY PRODUCTS
EMBRODERY WORKS
+973 37515705
SAUDI ARAMCO APPROVED
KSA AND BAHRAIN

SALES OFFER
Non Binding
1 Sales Offer No. CROWN-SO-672 - Dated on 03-August-2021
2 Description PRIME STEEL BILLETS
3
1. Prime Steel Billets - 4SP - 200MT approx.
2. Prime Steel Billets - 5PS - 150MT approx. Item(s) Description
4
1. As per the photos enclosed.
2. 100mm X 100mm X 5.80 meter( +/-20mm)
3. Chemical Composition attached.
Size & Specifications
5 Quantity & Tolerance 350 MT +/- 10% in 14x20` Container . Under 1BL
6 Quality Best Quality
7 Origin Bahrain
8 Mode of Packing Loose
9 Asking Price Best Price
10 Port of Loading BAHRAIN
11 Port of Discharge Nhava Sheva / Mundra / Kandla / Far East
12 Destination ICD/IHC can be done at buyer cost
13 Partial Shipment Not Allowed
14 Transhipment Allowed
15 Shipment Goods ready for shipment, can be delivered to port in immediately
16 Mode of Payment 20% advance and balance Payment against scanned copy of OBL.
17 Marine Insurance B class shall be given, A class cover cannot be given
18 PSI Certificate For India, it can be given
19 No guarantee for its reusability, Yield based recovery etc. It is sold as scrap. It is
buyer choice to melt it or re-use it Guarantee/Warranty
20 Photos Actual Photos enclosed
21 1.Under 1BL
2. Subject to prior Sale & Subject to Re-Confirmation. Conditions

ITEM

SUNFLOWER OIL
---------------------------------------------
DESCRIPTION
*Sunflower Oil *1.5 L Ã?? 6 PCS / Ctn / *Private label / *1 Container Ã?? 40ft
---------------------------------------------------------
QTY/CTN / 2,915

PRICE / CTN (USD) / 15.90




organ : Tyrkia


TERMS:

- PRICES TERMS:
- QUANTITY: +/- 10% depend on the container load.
- PAYMENT TERMS: 50% advance after signing the contract, 50% against copy of shipping documents.
- SHIPPING TIME: to be shipping within 50 days from confirming the designs & receiving the advance payment.
- DOCUMENTS APPLIED: Full set bill of loading (3 original); Certificate of origin; Commercial invoice; Packing list.
- All transfers must be from the Buyerâ??s bank account (000). Transfers through third parties are NOT acceptable.

Steel Pipes

Steel Billets

Our persistent passion for delivering international quality Frozen has brought us one step closer to the end consumers, our range of frozen products includes Frozen fish, Frozen seafood, Frozen meat, and Frozen vegetables, our products go through multiple quality checks and vacuum packing to ensure freshness and quality before they reach the customers

We offer the most extensive selection of organic herbs and spices. Our long-lasting relationships with vendors and producers enable us to deliver excellence in our Herbs and Spices trade, Our range of herbs and spices includes Ajwain, Aloe Vera, Amla, Aniseed, Amchur, Ashwagandha, Black cardamom, Black mustard, Baheda, Black pepper, Brahmi, Mustard, Clove, Cinnamon, Coriander, Cumin, Ginger, Turmeric, Fenugreek, Fennel, Flaxseeds, Garlic, Haritaki, Henna, Kalonji, Moringa, Neem, Nutmeg, Long pepper,isabgol, Naga King Chili, Red Chilli, Shatavari, Tamarind, Wheatgrass Powder, Sesame, Yellow Mustard

At UTS we source and sell Charcoal with impeccable quality, our charcoal is a lightweight black carbon residue produced by removing water and other volatile constituents from Plant materials. we produce charcoal by slow Pyrolsis the heating of wood in the absence of Oxygen. This process is called Charcoal Burning. The finished charcoal consists largely of carbon and can be used for various applications

UTS distributes imported produce that has International Standards in Quantity. Our lasting relations with farmers and producers globally allow us to collect and distribute top-notch quality products for the best pricing in the market. UTS considers customer satisfaction to be the pillar of our growth and we ensure premium quality in all our products our range of vegetables includes. Spinach, Ginger, Brinjal, Ash Gourd, Bitter Gourd, Carrot, Bitter Gourd, Chick Peas, Tomato,Cabbage,onion, potatoes etc.

Supply of tropical products, including bananas, oranges, apples, and avocados is one of the cornerstones of UTS, Our constant care for product safety allows us to meet different retailer requirements. We work closely with suppliers and producers to ensure premium quality fruits for our clients. our range of fruits includes Mango, Wood Apple, Mosambi, Sapota, Gooseberry (Amla) �· Guava, Jackfruit,kiwi,plum and Phalsa

LearnNuts and seeds are an important part of the global trading market. As demand for nuts and seeds continues to grow, the trading of nuts and seeds has become increasingly important and we at UTS ensures premium quality nuts and seeds for our customers, our range of nut include almonds, Brazil nuts, cashew nuts, hazelnuts, macadamias, pecans, pine nuts, pistachios, and coconuts, and we deal premium quality Chia seeds, pumpkin seeds, Flaxseeds, Sunflower seeds, Sesame seeds

CARBON DUST - Approx. 10,000 MT
Carbon is around 40-50% (100-ASH%-Magnets pick up%)
Iron Content by Magnetic Separation : 38%
Ash Contents ~ 22 %

Specification as per the attached photo.

CARBON DUST - Approx. 10,000 MT
Carbon is around 40-50% (100-ASH%-Magnets pick up%)
Iron Content by Magnetic Separation : 38%
Ash Contents ~ 22 %

Specification as per the attached photo.

Bitumen 60/70 shall be 50 % and Kerosine 50% Packed in Flexi Tank

Test Parameters Method Unit Result
Color Water white
Density 76.5
Flash <20

Distillation Range
IBP 40
10 % Recovered 'C 60
20 % Recovered 'C 80
30 % Recovered 'C 105
40 % Recovered 'C 115
50 % Recovered 'C 135
60 % Recovered 'C 150
70 % Recovered 'C 165
80 % Recovered 'C 200
90 % Recovered 'C 230
FBP 236

A1 Jet fuel to international quality standards.

Supplier of low Aromatic Industrial Grade Mineral White Spirit:
Leading seller of Industrial Grade Low Aromatic White Spirit can supply in Drums and flexi bags
21 metric ton/drum
18 metric ton/flexi bag
Product: White Spirit
Visual Appearance: Clear &Bright
Colour: Water White
Flast Point: 39.5º C
Distillation Range: 151.4º C. - 241.4º C.
Freezing Point: -56.6º C
Existend Gum(Air): 1mg/100ml
Copper Strip(2hrt5min@ 100º Ct1º C): 1a class
Water Detection: Free
CONDUCTIVITY:
Electrical Conductivity: 283ps/m
Conductivity Temperature: 27.0º C