Find Verified Automotive Diesel Fuel Suppliers, Manufacturers and Wholesalers

V9-V10 Borewell Submersible Pumpset

Falcon Dlx. 250 mm ( 9 & 10) Borewell Submersible Pumpsets are powered by water filled, rewindable submersibleMotor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated Copper winding wires and made up of low watt loss silicon steel laminations assembled under
pressureand rigidly locked in stainless steel stator shell. T-Bolt design in all motor ensures rigid construction.

Pump Liquids
- Clean
- Thin
- Non-Aggressive
- Non-Explosive
- Clear
- Cold
- Fresh water
- Without abrasives
- Solid particles

Salient Features
- SS 304 Grade Investment Casting Bowl and SS-304 Grade Impeller in radial flow MRS series 27Mtr head per stage in radial flow series.
- FG 250 Cast Iron Bowl with CED Catted and SS-304 Grade Impeller in Mix flow FMC Series 22Mtr head per stage in
Mix flow series.
- Specially designed high performance thrust bearing (SS-420 Tilting Pad with Carbon plate) to with stand axial thrust loads.
- Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set.
- Dynamically balanced rotating parts ensures minimum vibration and longer life.
- Designed for wide voltage fluctuations.
- Motor portion covered with corrosive resistance Stainless steel (SS 304) shell.
- More durability and hygiene & High operating efficiency.
- Specially designed thrust bearing to withstand high axial thrust load.
- Extremely hardwearing water lubricated bearing.
- Thread type motor construction ensures service feasibility.
- Designed for wide voltage operation.
- Best alternative for JET & Compressor pump set.
- Additional intermediate bearing in higher stage pumps.

Specification
- Power Range : 55 kW to 112 kW (75 HP to 150HP)
- Version : Three Phase 350 to 415V, 50Hz AC Supply
- Speed : 2900 RPM
- Head Range : 12 mtr. To 300 mtr.
- Discharge Range : 3600 LPM to 960 LPM
- Outlet Size in Inch : 4.0" & 5.0"
- Degree of Protection : IP 58
- Maximum Starts Per Hour : 10 Times

V7 Borewell Submersible Pumpset

Falcon Premium 175 mm (7) Borewell Submersible pumpsets are powered by water filled, rewindable submersible motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under
pressure and rigidly locked in stainless steel stator shell.

Pump Liquids
- Clean
- Thin
- Non-Aggressive
- Non-Explosive
- Clear
- Cold
- Fresh water
- Without abrasives
- Solid particles.

Salient Features
- Cast iron casting bowl and SS-410 grade impeller in mix flow series
- Specially designed high performance thrust bearing (SS-420 Tilting Pad with Carbon plate) to with stand axial
thrust loads.
- Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set
- Dynamically balanced rotating parts ensures minimum vibration and longer life
- Motor portion covered with corrosive resistance Stainless steel J4 shell
- More durability and hygiene
- High operating efficiency
- Special designed thrust bearing to withstand high axial thrust load
- Extremely hardwearing water lubricated bearing
- Thread type motor construction ensures services feasibility
- Designed for wide voltage operation
- Best alternative for JET & Compressor pump set
- Additional intermediate bearing in higher stage pumps

Specification
- Method of Starting : 3 ph -Direct Online (D.O.L) upto 5.5 kW, Star Delta (SD) upto 37.3 kW
- Power Range : 11.2 kW to 37.3 kW (15 HP to 50 HP)
- Version : Three Phase 350 to 415V, 50Hz AC Supply
- Speed : 2880 RPM
- Head Range : 18 Mtr. To 650 Mtr.
- Discharge Range : 1860 LPM to 55 LPM
- Outlet Size in Inch : 2.0 , 2.5 , 3.0 & 4.0
- Degree of Protection : IP 58
- Direction of Rotation : Electrically Reversible -3ph
- Thrust Load : 11.2 kW -37.3 kW -8000 lbs
- Minimum Cooling Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Maximum Starts Per Hour : 20 Times

Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 6 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5

V6 Borewell Submersible Pumpset
Falcon Premium 150 mm (6) Borewell Submersible Pumpsets are powered by water filled, rewindable submersible Motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated Copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure.

Pump Liquids
- Clean
- Thin
- Non-Aggressive
- Non-Explosive
- Clear
- Cold
- Fresh water
- Without abrasives
- Solid particles.

Salient Features
- SS 304 Grade Investment Casting Bowl and SS-304 Grade Impeller in radial flow series
- 60 feet head per stage in radial flow series
- Specially designed high performance thrust bearing (SS-420 Tilting Pad with Carbon plate) to with stand axial
thrust loads.
- Dynamically balanced rotating parts ensures minimum vibration and longer life
- Motor portion covered with corrosive resistance Stainless steel J4 shell
- More durability and hygiene
- High operating efficiency
- Extremely hardwearing water lubricated bearing
- Specially designed Deep Drawn type pump ensures perfect
alignment and Thereby increases the life of the pumpset
- Designed for wide voltage operation
- Additional intermediate bearing in higher stage pumps
- Fully SS pump set are available in SS - 304 Grade

Specification
- Power Range : 2.2 kW to 30 kW (3.0 HP to 40 HP)
- Version : Single Phase 180V to 230V, Three Phase 350 to 415V,
50Hz AC Supply.
- Speed : 2900 RPM
- Head Range : 12 Mtr. To 600 Mtr.
- Discharge Range : 1080 LPM to 170 LPM
- Outlet Size in Inch : 2.0, 2.5 , & 3.0
- Degree of Protection : IP 58
- Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph
- Thrust Load : 2.2 kW 4.5 kW - 3500 lbs, 5.5 kW - 30 kW - 6000 lbs
- Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) upto 2.2kW: 3ph -Direct
Online (D.O.L) upto 5.5 kW, Star Delta (SD) upto 30 kW
- Maximum Starts Per Hour : 20 Times

Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.)
6
- Viscosity : 6 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5

Falcon Premium 125 mm (5) Borewell Submersible pump sets are powered by water filled, rewindable submersible motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated copper winding wires. And, it is made up of low watt loss silicon steel laminations which are assembled under pressure and rigidly locked in stainless steel stators shell

Pump Liquids
- Clean
- Thin
- Non-Aggressive
- Non-Explosive
- Clear
- Cold
- Fresh water
- Without abrasives
- Solid particles.

Salient Features
- SS 304 Grade Investment Casting Bowl and Impeller in Radial Flow Series.(GRS - Series)
- 9 Mtr. Head Per Stage In Radial Flow Series.
- Specially designed high performance thrust bearing (SS-420 tilting pad with carbon plate) to withstand axial
thrust loads.
- Dynamically balanced roating parts ensure minimum vibration and longer life
- Motor Portion covered with corrosion resistant S.S. J4 shell
- More durability and hygiene
- High operating efficiency
- Extremely hardwearing water lubricated bearing
- Thread type motor construction ensures service feasibility
- Specially designed Deep Drawn type pump ensures perfect
alignment and Thereby increases the life of the pumpset
- Designed for wide voltage operation
- Best alternative for JET & Compressor pump set
- Additional intermediate bearing in higher stage pumps
- Fully SS pumps are available in (GRS - Series)

Specification -
- Power Range : 2.2 kW to 9.3 kW (3 HP to 12.5HP)
- Version : Single Phase 180V to 230V, Three Phase 350 to 415V, 50Hz AC Supply
(Single Phase available in 3 HP to 5 HP)
- Speed : 2880 RPM
- Head Range : 12 Mtr. To 640 Mtr.
- Discharge Range : 690 LPM to 80 LPM
- Outlet Size in Inch : 1.5, 2.0" & 2.5"
- Degree of Protection : IP 58
- Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph
- Thrust Load : 2.2 kW â?? 4.5 kW- 3500 lbs, 5.5 kW to 9.3 kW -6000 lbs
- Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) up to 2.2
kW, 3ph - Direct Online (D.O.L.) upto 5.5 kW, Star
Delta (SD) upto 9.3 kW
- Maximum Starts Per Hour : 20 Times

Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 6 1.75 x 10 m²/sec (max.)
- Ph Value : 6.5 to 8.5

Silicon carbide si made from hte mixture of pure silica sand and green petroleum
coke in ultra high power acheson furnace. Electric current is passed through t h e conductor,bringing about a chemical reaction ni which the carbon ni the coke and silicon ni the sand combined ot form SIC and carbon monoxide gas. Silicon carbide si
With annual capacity for 60,000 tons of silicon carbide, we can provide different grade of silicon carbide to meet different clients' requirements, such as 70% SIC, 80% SIC, 85% SIC, 90% SIC, 93% SIC and 98% SIC, etc.We also provide customized size for 90% SIC and 98% SIC, such as 200 mesh and 325 mesh

Fe203
Al203
Free carbon 3,5%MAX
Moisture Size(mm) Ha-SIC-01 90% min.
1.5% max.
15.% max. 35.% max.
0.5% max.
1-5/1-10 HQ-SIC-02 90% min.
1.5% max.
1.5% max. 3.5% max.
0.5% max.
0-10 HQ-SIC-03 88% min.
1.5% max. 1.5% max. 3.5% max. 0.5% max.
0-1/1-10 HQ-SIC-04
98% min.
0.6% max. 0.6% max. 0.2% max.
0.5% max.
0-1/1-3 HQ-SIC-05
70% min.
2% max. 1% max. 10% max.
0.5% max.
1-10

4 STEEL WIRE SPIRAL HYDRAULIC HOSE DIN EN 4SH
Construction:
Hydraulic Hose Tube: Oil resistant synthetic rubber,NBR.
Reinforcement: Four high tensile steel wire spiral layers.
Cover: Abrasion and weather resistant synthetic rubber, MSHA accepted.
Temperature: -40 to +125

Introduction:
We have a large hydraulic hose range in the market, which are available with the most abrasion-resistant covers. As marketing-leading hydraulic hose manufactures, we offer a a range that can deliver high performance and can withstand the harshest working environments. Our hoses are designed to perform in both high and low temperatures and pressures and are suitable for a variety of applications. Each of our hydraulic hoses are also in compliance with stringent industry standards such as SAE 100 and DIN.We also have ISO and MSHA certificate. Hydraulic Hoses are used for high pressure fluid power applications on mobile and fixed machinery. Our reinforced hoses can fit a wide variety of adapters and fittings.Our hydraulic hose is designed for use with petroleum- and water-based hydraulic fluids. Can handle gasoline, diesel fuels, mineral oils, glycol, lubricating oils and more. Hydraulic hoses handle high pressures in a wide range of fluid-power applications. From agriculture and manufacturing to all variety of heavy equipment operations, Manufactured to meet all applicable SAE specifications, Sinopulse hydraulic hoses are an affordable alternative to other brand hoses.We can also make hydraulic assembly for customers. Our Finished Assemblies are lengths of hydraulic hose with crimp fittings pre-attached. Customize the type of hose, length, and fitting to create the perfect assembly for your project.

* Syno 'BBC' Series is comprised of Barrel pumps to empty containers safely and efficiently with the minimum of effort. This is a vertical self-contained pumping unit that efficiently handles relatively large volumes of liquids, including gasoline, fuel oil, and sea water during barge unloading and transfer operations. These Pumps are suitable for numerous applications within the oil, gas, chemical and many manufacturing industries. These pumps meet the demands of complete fluid management as well as provides safeguard from spillage issues. Further, the high safety standards and reliable performance of these pumps also make them perfect to handle corrosive & flammable liquids like gasoline, petroleum products and others. They are perfect for low as well as high viscous liquid. Because of their lower noise and easy maintenance, they are highly preferred.

Performance Data

Capacity Range : Upto 500 LPH
Temperature : Upto 180C
Pressure : Upto 12 Bar
Viscosity : Upto 1 milion cP
Features and Benefits

* Light weight & hence portable
* Barrel pumps with their versatility help to provide a complete solution to your fluid management needs
* Modular design construction for easy maintenance
* All components are interchangeable
* Saves considerable time, labour, spillage
* No Welding is involved in any part of Tubes
* Easy maintenance and easy to operate
* Interchangeable components
Typical Applications

Acids
Beer
Diesel Oil
Lubricating Oil
Furnace Oil
Drug Formulations
Varnish Chemical Solutions
Chemical & Process
Brewery
Electrical / Power
Engineering
Mining
Oil
Paint & Varnish
Ink
Pharmaceutical etc.
Solvent & Chemical
Glycerin
Liquid Paraffin (heavy)
Resin Solution

DESCRIPTION:
FORTIUS 10W40 is a semi-synthetic lubricant based on carefully selected highly refined base oils. This oil is designed to meet the latest specifications of both European and American manufacturers of heavy diesel engines. It provides excellent protection against deposits in oil pipes, and turbos and provides improved protection against camshaft wear.
APPLICATIONS:
Suitable for low-emission engines in the Euro II and Euro III standards. It is not suitable for Euro IV engines with particulate filters. It allows very long drain intervals.
KEY FEATURES:
Total engine protection outstanding engine cleanliness and durability.
Cold start very good fluidity at low temperature.
SPECIFICATIONS:
Meets and exceeds: ACEA A3/B4, ACEA E7, API CI-4/SL, API CF-4, API CG-4, API CH-4, JASO DH-1, ALLISON C4, CATERPILLAR ECF-1a, CATERPILLAR ECF-2, CATERPILLAR TO-2, CUMMINS CES 20076, CUMMINS CES 20077, CUMMINS CES 20078, DAIMLER TRUCK DTFR 15B110, DETROIT DIESEL DFS 93K215, DEUTZ DQC-III-18, DEUTZ DQC-III-10, GLOBAL DHD-1, IVECO 18-1804 Classe T2 E7, MACK EO-N, MACK EO-M PLUS, MAN M3275-1, MB 229.1, MB 228.3, MTU Oil Category 1, MTU Oil Category 2, RENAULT RLD-2, RENAULT RLD, VOLVO VDS-3.

Buy directly from the factory in Brazil and experience the power of *Top Orange*, an innovative adjuvant with 100% Brazilian orange oil. Ideal for farmers and distributors looking to increase productivity and enhance the effectiveness of fertilizers, insecticides, and fungicides on their crops.

### Benefits of Top Orange:
- **Penetrating Action**: Reduces the natural barrier of leaves, allowing greater absorption of inputs.
- **Efficacy Enhancer**: Increases the absorption rate and effectiveness of fertilizers and agricultural defensives, providing greater protection and nutrition for your plants.
- **Natural Pest Control**: Its orange oil formulation acts on specific pests, contributing to plant health.
- **pH Reducer**: Promotes ideal conditions for foliar application of products.

**Origin**: Brazilian product with high-quality ingredients.

**Minimum Order**: 1 container of 20 feet.

**Become a Distributor!** Bring Brazilian productivity to your country and offer an exclusive product in the market. **We personalize your brand!**

Place your order now and join the agricultural transformation with a high-quality, advanced technology product developed in Brazil!

Product Description:
**Titanium Sollus Gel** is an innovative soil conditioner, also known as "solid rain," offering high water and nutrient absorption and retention capacity. Specifically designed to optimize soil conditions, it is ideal for all agricultural crops, including soybeans, corn, reforestation, and fruit cultivation.

**Advantages of Use:**
- **High water absorption capacity (400x)**, retaining water for up to 25 days without rain, ensuring continuous plant growth.
- **Reduces soil compaction** and maintains soil porosity, promoting root penetration.
- **Increases microbial activity** in the soil, creating a healthy environment for plants.
- **Prevents nutrient loss** through leaching, providing a constant supply of nutrients to plants.
- Suitable for all soil types: sandy, clay, and mixed soils.
- **Applicable to various crops**: soybeans, corn, reforestation, and fruit cultivation, ensuring greater water efficiency and productivity.
- **Improves seed germination** and promotes better plant stands.

**Usage Recommendations:**
- Apply mixed with fertilizers in the planting furrow or directly at the bottom of the hole when transplanting seedlings.
- Recommended doses:
- Clay soils: 10 kg/ha
- Sandy soils: 15 kg/ha
- Mixed soils: 13 kg/ha

**Packaging:**
Available in **25 kg** bags.

**Shipping and Origin:**
Product of **Brazilian** origin, with FOB shipping from Brazil.



**Price:**
FOB Price: **$3.89 per kg**.

Enhance water efficiency and increase your crop productivity with **Titanium Sollus Gel (Solid Rain)**, a versatile and essential soil conditioner for modern agriculture.
We offer customization options where we can personalize the product name and include your company's logo on the packaging. The product will be ready to ship directly from the factory with all your branding elements in place.

1) UREA-46 A/B
Components of the product, %:
(N-NH2) in form 46.2
Moisture contents: max 0.5%
Granulometric content:
1-4 mm - 90 %
Packing: 25-50 kg; 500-1000 kg
The recommended dose of fertilizer: 150-500 kg/ha

2) Ammonium Nitrate AN 33.5
Components of the product, %:
(N) - 33.5
Packing: 25-50 kg; 500-1000 kg

3) Ammonium-nitrate N34.4
Components of the product, %:
(N) - 34.4
(N-NH4) - 17.2
(N-NO3) - 17.2
Granulometric content:
for 1 mm 0.2%
for 0.5 mm <0.1%
pH: 6.2
Packing: 25-50 kg; 500-1000 kg
The recommended dose of fertilizer: 150-500 kg/ha

4) Ammonium Sulphate
Components of the product, %:
(N-NH4) - 21.0
Total sulfur (S) - 24.0
Granulometric content:
100% <2mm
Packing: 25-50 kg; 500-1000 kg
The recommended dose of fertilizer: 150-500 kg/ha

5) ASN 26-14
Components of the product, %:
(N) - 26
(S) - 14
Packing: 25-50 kg; 500-1000 kg

6) Calcium-ammonium nitrate N 27+4S
Components of the product, %:
(N) - 27.0
(N-NO3) - 13.5
(N-NH4) - 13.5
(S) - 4
Granulometric content:
1-4 mm, % min 95
<1 mm, % max 3
>6 mm, % max 2
Packing: 25-50 kg; 500-1000 kg

7) Calcium-ammonium nitrate N 27
Components of the product, %:
(N) - 27.0
(N-NO3) - 13.5
(N-NH4) - 13.5
(Ca) - 8
Granulometric content:
1-4 mm, % min 95
<1 mm, % max 3
>6 mm, % max 2
Packing: 25-50 kg; 500-1000 kg
The recommended dose of fertilizer: 100-300 kg/ha

8) Potassium chloride
Components of the product, %:
(K2O) - 60.0
Moisture contents: max 0.5%
Granulometric content:
2-4 mm min 87 %
>4mm - max 3
to 2mm - max 8 mm
Packing: 25-50 kg; 500-1000 kg
The recommended dose of fertilizer: 150-500 kg/ha

9) NPK 15-15-15 +9S
Components of the product, %:
(N) - 15
Total (soluble in mineral acids) phosphorus (P2O5) - 15
(K2O) - 15
(S) - 9
Packing: 25-50 kg; 500-1000 kg

10) NPK 16-16-16
Components of the product, %:
(N) - 16.0
(N-NO3) - 6.4
(N-NH4) - 9.6
(P2O5) - 11.2
Phosphorus (soluble in neutral ammonium citrate) (P2O5) - 16.0
(K2O) - 16.0
Moisture contents: max 1.0 %
Granulometric content:
1-4mm - 90%, to 1 mm 2% max
Packing: 25-50 kg; 500-1000 kg
The recommended dose of fertilizer: 150-500 kg/ha

11) NPK 22-11-11
Components of the product, %:
(N) - 22.0
(P2O5) - 11
(K2O) - 11
(S) - 2.0
Moisture contents: max 1.0 %,
Granulometric content:
>4 mm max 2 %
1-4mm - min 95%, to 1 mm 3% max
Packing: 25-50 kg; 500-1000 kg
The recommended dose of fertilizer: 150-500 kg/ha

12) Superphosphate
Granular, water-soluble fertilizer for crop supply of nutrients.
Components of the product, %:
(P2O5) - 20
Phosphorus (soluble in neutral ammonium citrate) (P2O5) - 19
(CaO) - 25
(S) - 13
Packing: 25-50 kg; 500-1000 kg

Iron Ore

Used Rail

Basmati Rice

Dried Coconut Copra

Golden Sella Basmati Rice

We meet the demands of different industries by offering the finest quality Engine Gaskets. These Engine Gaskets are fitted in different models of engines and are known for their high durability. We offer Engine Gaskets for various types of diesel engines, oil engines, etc. These Engine Gaskets are mostly made of Cellulose base fibers or CAF material. Our Engine Gaskets are highly resistant to wear-and-tear and remain in use for years.
Features :
Accurate dimension
Long usable life
Wear-and-tear resistant
Resistant to high temperature and pressure

Product Name Stack and nest crate Stackable storage vegetable mesh plastic tomato crate
Material 100% virgin PP
Style Vegetable and fruits storage
Dimension 600*400*240mm 600*400*310mm 600*400*340mm
Loading 30kg
Stack load 150kg
Product description
1.Stackable The stackable crates could stack firmly to save floor space.Suggest to stack 4 - 6 pcs high
2.Nestable The nestable crate could nest during the transportation.70% space saving

High-efficiency diesel fuel designed for engines and heavy equipment, featuring a low sulfur content and clean combustion to ensure optimal engine performance.

What's the introduction of micro oval gear flow meter
Micro oval gear low flow meter is a kind of oval gear flow meter , along to positive displacement flow meter. There is thousands of manufacturers who can produce oval gear flow meter. But only several manufacturer who have technology to produce micro liquid flow meter.
Micro oval gear flow meter offer the highest accuracy and measure for various viscosity liquid. Special patent technology to measure flow from 0.1ml/min and ensure working life more 5 years.
Micro oval gear low flow meter is wildly used for various industries for precision measurement. So far it has been serviced for more 100 using condition, such as fuel oil measurement, adhesive control , hydraulic life cycle testing, electrolyte dosing, natural gas odorization.

What's the main features of micro oval gear flow meter
1) anti-dust, anti-vibration, anti-corrosive&explosion-proof.
2) max accuracy up to 0.2%
3) min flow : 0.1ml/min
4) max temperature: 200c
5) max pressure: 1000bar
6) viscosity liquid:0.3~10000cps.