Find Verified Temperature Controllers Indicators Suppliers, Manufacturers and Wholesalers

1.Large LCD screen with blue backlight
2.Setting Temperature Range: 16-35º C,Room temperature:0-50º C
3.Wiring box: 86mm*86mm
4.High grade electronic accessory
5.TX-1008 remote controller is optional(Price is differ)
6.Temperature precision:1º C
7.Locked by remote controller is optional
8.Electric parameter: AC220V±10% 50/60Hz.

1.Temperature setpoint:16º C-35º C.room temperature: 0º C-50º C
2.LCD light screen shows the running condition of valve
3.Sleeping function
4.Manual alternate of cool or heat
5.Automatically adjust the wind speed
6.Set output delay time about 0-10 minutes
7.Advanced microcomputer control wafer
8.room temperature control precision 1º C.
9.Shell Material: White ABS flameproof plastic
10.Electric parameter: AC110/220V±10% 50/60Hz
11.Two-line, three-line motorized valve
12.Two-pipe, Four-pipe cooling and heating system.

MS182 is a smart in-head transmitter module with HART® -protocol. It has measurement input for resistance Thermometers (RTD), thermocouples, resistance or millivolt signals in 2-, 3- or 4-wire connection, and converts various input signals into a standard 4 to 20 mA analog output signal after linear processing. The transmitter is programmable directly from PC or via the HART communication. Isolation is provided between the input and output. A special signal can be set in advance while the sensor burnout or short.
Primary Technical Characteristics
Programmable Use PC or the hand operator
Measuring range Set via PC or by the hand operator
Input type RTD, TC, R or Millivolt signal
Convert accuracy 0.1£¥FS
Cold junction accuracy ¡À1(TC)
Output 4¡«20mA/20¡«4mA Electrical isolation output
HART ¨CProtocol output
Max-load £¨V -13V£©/0.025A£¨Current output £©
Limit current 25mA
Response time 1s
Isolated voltage 1500V AC (input/output)
Alarm signal Programmable
Underranging linear drop to 3.8 mA
Overranging linear rise to 20.5 mA
Sensor break or short-circuit:
3.6mA or ¡Ý21.0mA
Power supply 13¡«30V DC
Temperature drift 0.01£¥ FS/1
Long-term stability 0.1 per year or 0.05 £¥per year
Ambient -40¡«+85.

MS181 is an intelligent temperature transmitter module which can be programmed through a PC with Configuration Kit. It has measurement input for resistance thermometers (RTD) ,thermocouples, resistances or millivolt signals in 2-,3- or 4-wire connection, and converts various input signals into a 4~ 20mA analog output signal after linear processing. Isolation is provided between the input and output. A special signal can be set in advance while the sensor burnout or short.
Primary Technical Characteristics
Programmable Use the MS181 programming tool
Measuring range Set via PC
PC Interface USB/RS232
Input type RTD, TC, R or Millivolt signal
Convert accuracy ¡Ü0.1£¥FS
Cold junction accuracy ¡À1(TC)
Output 4¡«20mA/20¡«4mA Electrical isolation output
Max-load £¨V -8V£©/0.025A£¨Current output £©
Limit current ¡Ü25mA
Response time 1s
Isolated voltage 1500V AC (input/output)
Alarm signal Programmable
Underranging linear drop to 3.8 mA
Overranging linear rise to 20.5 mA
Sensor break or short-circuit:
¡Ü3.6mA or¡Ý21.0mA
Power supply 8¡«30V DC
Temperature drift 0.01£¥ FS / 1
Long-term stability ¡Ü0.1 per year or 0.05£¥ per year
Ambient -40¡«+85

MS183 , a smart 2-wire in-head and dual-input transmitter module with HART® -protocol, has measurement input for resistance Thermometers (RTD), thermocouples, resistance or millivolt signals in 2-, 3- or 4-wire connection and converts various input signals into a standard 4 to 20 mA analog(high selector, average value or D-value) output signal or 2-way digtal output signals with HART® -protocol after linear processing. The transmitter is programmable directly from PC or via the HART communication. Isolation also is provided between the input and output. A special signal can be set in advance while the sensor burnout or short.
Primary Technical Characteristics
Programmable Use PC or the hand operator
Measuring range Set via PC or by the hand operator
Input type Dual-input ( RTD, TC, R or Millivolt signal)
Convert accuracy ¡Ü0.1£¥FS
Cold junction accuracy ¡À1¡æ(TC)
Output 4¡«20mA/20¡«4mA Electrical isolation output
HART ¨CProtocol output (2-way)
Max-load £¨V -16V£©/0.025A£¨Current output £©
Limit current ¡Ü25mA
Response time 1s
Isolated voltage 1500VAC (input/output)
Alarm signal Programmable
Underranging linear drop to 3.8 mA
Overranging linear rise to 20.5 mA
Sensor break or short-circuit:
¡Ü3.6mA or ¡Ý21.0mA
Automatic switching while sensor damaged
Power supply 16¡«30V DC
Temperature drift 0.01£¥ FS/1¡æ
Long-term stability ¡Ü0.1¡æ per year or 0.05 £¥per year.

• Universal PC programmable (PCP)
• 2 wire technology, 4 to 20 mA analogue output
• High accuracy in total ambient temperature range
• Configuration during measurement using configuration kit
• Customer specific measurement range setting
• Wide measurement range, according to requirement
Field of application
• PC programmable (PCP) Temperature head transmitter for converting the input signal into a standard 4 to 20 mA analog output signal
• Input: Resistance thermometer (RTD) Pt100
• Configuration using a PC with MS180 configuration kit (MS180-PC).



Appearance and Size (in mm)

NOTE: When order, please specify the measuring range, we’ll offer programming tool if needed.

MS150 Series multi-channel temperature monitor is a multi-point temperature measurement instrument. It takes the highest measured temperature in measuring loops as its output signal which is sent out in the form of a 4 to 20 mA standard current signal and the temperature is displayed by the built-in LED. If required, temperature at any measuring point can be shown by operating the keys on panel. Isolation is provided between the input and output.
It is mainly used in the applications of multi-point temperature measurement or alarm warning system. By adopting SMT technology, it offers excellent accuracy, reliability and anti-disturbance.
Primary Technical Characteristics
Measuring range 0¡«100¡æ¡¢0¡«150¡æ¡¢0¡«200¡æ
£¨according to user's demand£©
Input type Pt100,Cu50£¨TC if specially required£©
Measuring Points 2,3,4,5,6 points
Convert accuracy ¡Ü0.5£¥FS
linearity error < 0.1%
Output 4¡«20mA Electrical isolation output
Digital display LED
Display accuracy 0.5%
Voltage drop for display 3V
Isolated voltage Drop 2V
Isolate Voltage 1500V AC (Input/Output¡¢with isolator)
Max-load £¨V -14V~16V£©/0.025A£¨Current output £©
Limit current ¡Ü25mA
Response time 1s
Power supply 14~30V DC
Temperature draft 0.025% FS/ 1¡æ
Long-term stability ¡Ü0.1¡æper year or 0.05£¥ per year
Ambient -40~+85¡æ£¨Aluminium alloy .Casing£©
-25 ~+75¡æ£¨Plastic Casing£©
Protection level IP66£¨Aluminium alloy£©/IP62£¨Plastic£©
Anti-RFI >10v/m(80MHz¡­¡­1000MHz).

Cooling and heating controller.

Fan controllers
Light control / baybus
Front i/o adapters
Temperature sensors
Configurable lcd displays
Fan speed controller
Manual rpm control
Multi fan controller,
Fan rpm monitoring and control .




Cartons.

The controller is designed for aquarium controlling.It process is directly and efficiently perceived through the senses.The autocontrol including temperature, pump an lights.The customer setting can be remembered when the power shut down.For the physical desigh, we seperate the high voltage circuit from the controlling circuit.This is safe for the operating personnel.The power board print every output name , such as light, uv, .Etc.The controller is necessary for aquarium.



CARTONS

Main function: cooling, heating, ventilation, fresh air, error alarm, 3-grade air-flow adjustment, hold cooling.

Application: KINGTECH,LIUGONG Machinery, XGMA Machinery.

Power supply : 12V/24V(DC10V-DC15V)(DC20V-DC30V)
Power consumption : 0.5W
Current : Max.100mA
Input
: 1) Interior temp. sensor (25¡æ,Rb=5K£¬B=3274)
2) A/C power£¨generator£©
Output : 1) Fan grade 3(max. 2A)
2) Fan grade 2(max. 1.5A)
3) Fan grade 1(max. 1A)
4) Clutch signal (max. 1A)
Display : Marked
Ambient temperature : -30¡æ¡ª80¡æ 5£¥£­95£¥RH Non-condensing
Storage temperature : -10¡æ¡ª70¡æ 5£¥£­95£¥RH Non-condensing
Display precision : Dual digit display of set temp., accuracy 1¡æ; dual digit display of inside temp. accuracy 1¡æ
Faceplate level : IP54
EMC level : EN50081&EN50082-2
Security level : Applied to EN61010-II, Pollution degree: II
Weight : 150g.

Technical date

Code : NHT06006L01
Power supply : DV24V(DC16V-DC30V)
Power consumption : 3W
Current : BELOW 100mA
Electrical connection : Max.1m X 0.5mm
Direction of rotation : ON/OFF
Angle of rotation : 89¡ã+2¡ã
Torque : 6kgf.cm
Running time : 3.5+0.5rpm
Locked torque : 412kgf.cm
Locked current : Max.50mA
Noise level : Max.43dB(A)
Ambient temperature : -30¡ãc¡ª80¡ãc
Storage temperature : -40¡ãc¡ª85¡ãc
Life : Max.500,000 cycle
Dimensions : 112X57X72(mm)
Weight : 205g
Quality certification : TS16949/ISO9001.

Main functions: fully-automatic control, cool, heating, ventilation, fresh air, air-flow direction, memory, error alarm, voltage auto-protection, demisting, evaporator fan PWM 7-grade adjustment, LCD display ,attractive appearance.

The shift function
1) Running time check
2) Defrost temp. display (press fresh air button for no less than 3S)
3) Hold cooling (press cooling button for no less than 3S)

Application
YUXIN Automotive Air Conditioner, LIUGONG Machinery, XGM Machinery, JINGONG Machinery, KOBELCO.

Room thermostat.

AC250V 16A T125 10E4.

AC250V 16A T150 1E4.

Features:
1. Indoor temperature (¡ãF or ¡ãC).
2. Wireless outdoor temperature.
3. Wireless outdoor humidity.
4. One remote sensor WH2 included.
5. Can receive up to 3 sensors.
6. Free standing
7. Min and Max records of temperature and humidity.
8. Time and date with manual setting.
9. 12 or 24 hour digital time display.
10. Synchronized instant reception.
11. Low power consumption.

Specifications:
1. Humidity range: 20% - 95%RH (+/- 5% under 0 to 45¡ã).
2. Outdoor temperature range: -40¡ãC ~ +65¡ãC.
3. Indoor temperature range: 0¡ãC ~ +60¡ãC.
4. Temperature accuracy: +/-1.0¡ãC.


1. Base station: 113x67x27.5mm
2. Sensor WH2: 91X70X32.5mm.

Features:
1. Detail display of rainfall data in 1hour, 24hour, week, month and total since last reset (user selectable in inch or mm).
2. Indoor and outdoor temperature (¡ãF to ¡ãC).
3. Radio controlled time and date with manual setting option.
4. 12/24 hour time mode.
5. Time alarm.
6. Perpetual Calendar.
7. Time zone setting.
8. Wall hanging or free standing.

Specifications:
1. Indoor temperature range: -9.9¡ãC - +60¡ãC (32¡ãF - +140¡ãF).
2. Remote temperature range: -40¡ãC - +65¡ãC (-40¡ãF - +149¡ãF).
3. Temperature accuracy: +/-1.0¡ãC.
4. Rainfall display range: 0 - 19,999mm.


1. Receiver: 145x81x27mm
2. Sensor:76x150x60mm.

1. Solar powered transmitter.
2. UV index (0-12).
3. Illuminance for local measurements.
4. USB port for easy connection to your PC.
5. All the weather data from the base station and up to 4080 sets of weather history data with user adjustable measuring intervals can be recorded and uploaded to your PC.
6. Free PC software for transfer of weather data to PC.
7. Rainfall data (inches or mm):1-hour, 24-hour, one week, one month and total since last reset.
8. Wind chill and Dew point temperature display (¡ãF or ¡ãC)
9. All minimum and maximum values along with time and date of their recordings.
10. Wind speed (mph, m/s, km/h, knots, Beaufort).
11. Wind direction display with LCD compass.
12. Weather forecast tendency arrow.
13. Weather alarm modes for: temperature, humidity, wind chill, dew point, rainfall, windspeed, air pressure, storm warning.
14. Forecast icons based on changing barometric pressure.
15. Barometric pressure (inHg or hPa).
16. Indoor and outdoor temperature display in degrees Fahreheit or Celsius.
17. Indoor and outdoor humidity display in degrees Fahreheit or Celsius.
18. Receive and displays the radio controlled time and date (WWVB, DCF version available).
19. 12 or 24-hour time display.
20. Perpetual calendar.
21. Time zone setting.
22. Time alarm.
23. High light LED backlight.
24. Wall hanging or free standing.
25. Synchronized instant reception.


Base station: 165x148x27mm.