Find Verified Electronic Sensors Suppliers, Manufacturers and Wholesalers

Engine Oil Pressure Switch For " Audi & Volkswagen "
Part Number : 038919081M

Brake Booster Diaphragm Position Sensor For " Mercedes-Benz "
Part Number : A0015401517

Left/Right Wheel ABS Speed Sensor For " Land Rover & Jaguar "
Part Number : LR033457

Engine Oil Level Sensor For " Porsche "
Part Number : 95860616011

Typical vehicle detection application using magnetic sensor and earth' field are: replace loop sensor. The VDS100 has been specifically designed and engineered for use in the demanding Traffic control industry. With standard operations including: 2 Channel input ports, 2 channel ouput ports and selectable presence time options(1~60 sec)

UV Flame sensor is fire detect sensor which detecs ultraviolet rays of a flame instantly and output warning signal outside. By using emergency call equipment or adjusting the sensor connection, SKH-)$& can supervise multiple sensors at a long range.

Resistance tolerance: 15%
Independent linearity:0.1%, 0.2%, 0.3%, 0.5%, 1.0%
Theoretical electrical angle:345fp2fp
Mechanical angle:360fp
Power rating: 2W(70f),0W(125f)
temperature coefficient of resistance:f_0.04%/f
Operating temperature range:-55ff++125f

Our most advanced intelligent spot detectors, multi-criteria/multi-sensor devices use multiple sensors to detect various conditions in an environment sensing a wider range of fires with greater accuracy.

Features & Benefits:

Multi-Criteria/Multi-Sensor smoke detection
Unique ability to detect major elements of a fire
Highest nuisance alarm immunity
Advanced algorithms interpret and respond to multiple inputs

This Ultra-thin joint torque sensor is designed to selectively measure rotational torque along a single axis by distinguishing and extracting it from external forces consisting of 3-axis forces and 3-axis moments.
It is primarily used in specialized situations where only torque needs to be extracted or in motors that generate torque.
Ultra-thin Joint Torque Sensor accurately and sensitively measures torque applied to robot joints,
enabling precise collision detection and torque control in a compact design.

This Ultra-thin joint torque sensor is designed to selectively measure rotational torque along a single axis by distinguishing and extracting it from external forces consisting of 3-axis forces and 3-axis moments.
It is primarily used in specialised situations where only torque needs to be extracted or in motors that generate torque.
Ultra-thin Joint Torque Sensor accurately and sensitively measures the torque applied to robot joints,
enabling precise collision detection and torque control in a compact design.

This is suitable for mounting on the gripper's tip end to handle irregular objects
such as food, rubber, and plastic injection-molded product without causing damage.
Applicable to VR, haptic devices, and medical fields as well.

Compatible with various force torque sensors, assisting in the motion and force control of collaborative robots.

Ultra-thin Joint Torque Sensor accurately and sensitively measures torque applied to robot joints,
enabling precise collision detection and torque control in a compact design.
This Ultra-thin joint torque sensor is designed to selectively measure rotational torque along a single axis by distinguishing and extracting it from external forces consisting of 3-axis forces and 3-axis moments.
It is primarily used in specialized situations where only torque needs to be extracted or in motors that generate torque.

Compatible with various force torque sensors, assisting in the motion and force control of collaborative robots.

Price on request. LRF600H is a 905 nm direct time-of-flight ranging module specified for 0.05-600 m at 90% target reflectivity and 0.05-200 m at 10% reflectivity. Its measurement frequency switches automatically between 1 kHz and 50 Hz according to echo strength. The module provides UART communication and uses a 9-36 V DC supply. Confirm signal levels and the installation conditions for your system. Send your working distance, target surface, host interface and quantity for a sample or technical inquiry.

Model information and published datasheet:

Price on request. LRF50H is a 905 nm direct time-of-flight ranging module specified for 0.05-50 m at 90% target reflectivity and 0.05-15 m at 10% reflectivity. It provides UART communication and uses a 9-36 V DC supply. The source document specifies a default measurement frequency of 1 kHz, configurable from 20 Hz to 10 kHz. Check the model-specific pinout and confirm UART signal levels before integration. Send your working distance, target surface, host interface and quantity for a sample or technical inquiry.

System57 Control CD Catalytic/Direct Sensor Input

Product Features:
-Modular design supports gas and fire control cards (e.g., 5701, 5704, 5704F) in one system
-Flexible input compatibility with flammable/toxic gas detectors, flame/smoke/heat detectors, and manual call points
-Advanced alarm logic, including zoned, master, voted, time-delayed, and rate-of-rise alarms
-Communication outputs: RS-485 ModBus and 4-20 mA analog output for easy system integration
-Event logging & FirePic with timestamped records for incident analysis

NTC Temperature Sensor
EGN supplies NTC temperature sensors for industrial equipment, home appliances, EV battery systems, BMS, automotive electronics and medical devices. Available constructions include epoxy sensors, metal probes, threaded sensors, terminal sensors and integrated sensor assemblies.
As an NTC temperature sensor supplier, EGN supports standard products and� custom temperature sensor solutions with configurable resistance, B value, tolerance, probe, cable and connector options.
NTC Temperature Sensor Specifications
Parameter Typical Specification
R25 Resistance 1K�©â??100K�©
B Value 3380Kâ??4500K
Tolerance �±0.5%â??�±3%
Typical Operating Temperature -40�°C to +125�°C
High-Temperature Options 150�°C, 250�°C and 300�°C+ depending on model
Response Time From â?¤3s depending on sensor structure and test medium
Sensor Structure Epoxy, metal probe, threaded, terminal and custom structures
Probe Material Copper, stainless steel and application-specific materials
Cable Custom cable type, insulation and length
Connector Terminal, connector or bare-wire configurations
Customization R value, B value, tolerance, probe, cable, connector and mounting
For applications requiring a different sensing technology, see our Pt RTD sensors or browse the complete temperature sensor range.

NTC Temperature Sensor for Electric Motor Temperature Detection EG-N018
NTC Temperature Sensor for HVAC & Motor Temperature Detection
The EG-N018 NTC Temperature Sensor is designed for fast and accurate temperature detection in HVAC systems and electric motors.
With a compact epoxy-encapsulated structure and rapid thermal response, this sensor is well-suited for applications requiring real-time temperature feedback and stable control performance.
As an experienced OEM manufacturer, we provide custom NTC temperature sensor solutions� tailored for air temperature sensing, motor protection, and embedded system integration.
Key Features
Fast response (~5s) suitable for dynamic temperature environments
Compact size (4 mm) for easy integration into tight spaces
Stable resistance performance for long-term operation
Wide operating temperature range up to 150�°C
High insulation resistance for reliable electrical performance
Suitable for both air temperature sensing and surface detection
Typical Applications
The EG-N018 is optimized for air temperature sensing and motor thermal monitoring, including:
Air conditioning room temperature detection (HVAC systems)
Electric motor temperature detection and protection
Air inlet / outlet temperature sensing in HVAC equipment
Fan coil units and thermostat systems
Motor windings and surface temperature monitoring
Industrial ventilation and environmental control systems
Its fast response makes it especially suitable for� systems requiring real-time temperature feedback and rapid control adjustment.
Custom NTC Temperature Sensor Solutions
As a professional OEM supplier, we support flexible customization for different applications:
Resistance value and B constant customization
Miniaturized probe design for compact installations
Cable length, insulation material, and shielding
Connector and terminal integration
High-temperature and moisture-resistant designs
Integration into HVAC systems or motor assemblies
We support projects from� sample development to mass production, ensuring consistent performance and reliability.

Temperature Sensor Accessories are essential components that support the accurate, safe, and efficient operation of temperature sensing devices such as RTDs, thermocouples, thermistors, and digital sensors. Designed for industrial, commercial, and laboratory use, these accessories enhance sensor performance, ensure reliable signal transmission, and protect the sensor in harsh environments.

â?? Key Features:
Compatible with RTD, thermocouple (K, J, T, etc.), and digital temperature sensors
Designed for easy installation, calibration, and maintenance
Made from durable materials like brass, stainless steel, aluminum, or plastic
Withstands high temperatures, corrosive media, and vibration
Available in custom thread sizes, cable lengths, and mounting styles
Ensures signal integrity and sensor protection in field conditions

ð??§ Available Accessories Include:
Thermowells â?? Protective sleeves for sensors in high-pressure/temperature environments
Compression Fittings & Adaptors â?? Secure and leak-proof sensor mounting
Terminal Heads & Enclosures â?? Weatherproof and explosion-proof housings
Cable Glands & Bushings â?? Secure wire entries with strain relief
Mounting Brackets & Flanges â?? For stable and accurate sensor placement
Connectors & Extension Cables â?? For signal transmission and modular installation
Ceramic Beads & Insulators â?? For high-temperature applications

ð?? ï¸? Applications:
Industrial automation and process control


Power generation and utility monitoring
Chemical and pharmaceutical manufacturing
Food processing and thermal mapping
Laboratory and scientific instrumentation

Temperature Sensor

EGN is a temperature sensor manufacturer supplying NTC temperature sensors, Pt RTD sensors, digital and specialty temperature sensors for OEM equipment manufacturers worldwide.
We support temperature sensing projects for home appliances, HVAC equipment, industrial controls, EV battery systems, energy storage and medical equipment. Standard models are available alongside custom probe, cable, connector and sensor assembly configurations.
For buyers sourcing directly from a China temperature sensor manufacturer, EGN provides product selection, engineering evaluation, sampling and production support from one supplier.
Temperature Sensor Product Range
Different temperature sensing technologies suit different accuracy, temperature range, response and installation requirements.
Sensor Type Main Characteristics Typical Applications Product Range
NTC Temperature Sensor Fast response, high sensitivity, compact and cost-effective Appliances, EV batteries, BMS, HVAC and liquid sensing View NTC Sensors
Pt100 / Pt1000 RTD Sensor High accuracy, good linearity and long-term stability Industrial equipment, HVAC, laboratories and process equipment View Pt RTD Sensors
Digital Temperature Sensor Digital signal output and multi-point sensing options Power systems, fault monitoring and industrial equipment View Digital Sensors
Thermocouple Suitable for wider and higher-temperature measurement Industrial heating, fire protection and equipment monitoring View Specialty Sensors
NTC Temperature Sensors
NTC temperature sensors are suitable for applications requiring fast response, compact installation and accurate temperature control within a defined operating range.

PTC Temperature Sensor for Temperature Detection Inside the Pellet Stove, EG-P001
The EG-P001 PTC Temperature Sensor is designed for temperature detection inside pellet stoves and high-temperature furnace environments.
With a stainless steel probe structure and stable resistance characteristics, this sensor is suitable for applications requiring reliable temperature monitoring under elevated temperature conditions.
As an OEM manufacturer, we provide custom PTC temperature sensor solutions with flexible configurations to meet specific installation and system requirements.
Key Features
Suitable for high-temperature environments up to 250°C
Stable resistance characteristics for continuous temperature monitoring
304 stainless steel probe for durability and thermal conductivity
Standard platinum resistance types (PT100 / PT200 / PT1000) available
Compact probe size for installation inside heating systems
Reliable electrical insulation performance
Typical Applications
The EG-P001 is specifically designed for heating and furnace temperature monitoring, including:
Temperature detection inside pellet stoves
Pellet furnace internal temperature monitoring
Heating system temperature control
Industrial heating equipment
Solid fuel combustion systems
It is suitable for applications requiring stable sensing under continuous high-temperature conditions.
Custom PTC Temperature Sensor Solutions
As a professional OEM supplier, we offer customization based on application requirements:
Resistance type selection (PT100 / PT200 / PT1000)
Probe diameter and length adjustment
Cable type, insulation, and connection method
High-temperature resistant design optimization
Integration into heating system assemblies
We support development from sample validation to batch production, ensuring consistent quality and performance.

NTC Temperature Sensor for Temperature Detection of New Energy Control System, EG-N006
The EG-N006 NTC Temperature Sensor is designed for temperature detection and control in new energy systems, including battery packs and multi-point thermal monitoring applications.
Wth a wide operating temperature range and robust electrical insulation performance, this sensor is suitable for environments requiring reliable temperature feedback, system protection, and stable long-term operation.
As an OEM manufacturer, we provide custom NTC temperature sensor solutions tailored for integration into energy systems, control modules, and wiring assemblies.

Key Specifications
Parameter Specification
Model EG-N006
Sensor Type NTC Thermistor
Resistance @25�°C 10K�© (Customizable)
B Value (25/50) 3950K (Customizable)
Operating Temperature Range -20�°C to +200�°C
Accuracy �±1%
Response Time â?¤30s (in still air)
Terminal Material Pure Nickel Electrical Terminals
Terminal Inner Diameter Ã??5.2 mm
Withstand Voltage AC 1500V
Insulation Resistance â?¥100M�© at DC500V

Key Features

Wide temperature range up to 200�°C, suitable for high-temperature environments


Stable resistance characteristics for continuous monitoring


Pure nickel terminals for improved conductivity and durability


High electrical insulation and dielectric strength for safety-critical systems


Suitable for multi-point temperature detection and control architectures


Designed for integration into energy systems and electrical assemblies

Bag filters are used for removal of solids from liquids. Depending on pressure, flow, viscosity, nature of liquid, we can design and manufacture a suitable liquid bag filter. The housing of the filter can be Mild Steel, Stainless Steel, FRVE or any other.i

Fujikura FCX-MV Oxygen Sensor
Basic Information
Manufacturer: Fujikura Ltd., Japan
Model: FCX-MV-F / FCX-MV-F-AC
Type: Oxygen Sensor Module
Performance Specifications
Measurement Range: 0.1 - 25 % o2
Accuracy: �±1 %FS
Output Signal: Analog mV (Logarithmic output)

Output Range: 0 ~ 2669 mV
Response Time: 30 sec (to 90% of final value)
Power Supply: DC 5 V �±0.2 V
Max Power Consumption: 4 W
Operating Temperature: â??10 â?? - +50 â??
Operating Humidity: 0 ~ 85 %RH (non-condensing)
Service Life: More than 3 years in normal air
Dimension: 50 Ã?? 38 Ã?? 104 mm
Weight: Approx. 120 g
Key Features
High measurement accuracy
Long service life, no routine calibration required
No reference gas needed
Negligible pressure dependency
Excellent resistance to medium interference
No digital communication interface, analog mV output only
Applications
Oxygen concentrators
Nitrogen generators
Combustion control systems
Laboratory incubators and ovens
Welding and soldering equipment

Relative Humidity & Temperature Sensor

The RainWise Submersible Temperature Sensor may be used to measure either soil temperature or liquid temperature. The sensor is embedded in a PVC housing connected to a two-conductor cable.

The sensor SEN-TH integrate sensor elements plus signal processing in compact format and provide a fully calibrated digital output. A unique capacitive sensor element is used for measuring relative humidity while temperature is measured by a band-gap sensor. The applied CMOSens�® technology guarantees excellent reliability and long term stability. Both sensors are seamlessly coupled to a 14bit analog to digital converter and a serial interface circuit. This results in superior signal quality, a fast response time and insensitivity to external disturbances (EMC).

This temperature sensor used to monitor the temperature of Ground/Surface water, lakes, pools, aquatic ponds, Soil, Ice, Road Temperature. The temperature sensing device is potted in a stainless steel probe mounted in a plastic enclosure and are coated with a sealant to withstand outdoor moisture. It is designed specifically to monitor temperature. This sensor can be connected to data-logger, controller or to some display by means of electronic interface. If the temperature gets too high or low, the controller can then take the appropriate programmed action. The temperature can also be displayed on the console, in PC Access etc.

Product Features:
1. Small size, high power, strong ability to suppress
surge current
2. Fast reaction speed, large material constant
(B value),
Small residual resistance
3. Long life, high reliability, full range, wide
application range

DTZ-400G Series Surface Temperature Calibration System is primarily used to calibrate surface sensors of various sizes and types, such as thermistors, film sensors, surface resistance thermometers, ribbon sensors, surface thermocouples, and more. The product consists of a controller and a heater. It is easy to operate, intuitive to display, and can be heated simply by setting the temperature.The temperature rises rapidly and the multi-stage PID temperature control is accurate. The effective use range is up to 130mm in diameter and has a communication interface to communicate with the computer. This product can be used as an infrared camera calibration source if it is slightly changed.
Product Features
1.The calibration temperature can reach 400 The temperature rises and the temperature drops quickly.
DTZ-400 surface temperature calibration system has a good temperature rise and fall, from room temperature to 400, only 30 minutes, from 400 to room temperature, with a rapid cooling device only 50 minutes, greatly improving work efficiency .
2.Calibration plate diameter up to 130 mm, meeting most surface temperature sensor calibration needs
130mm and is sufficient for calibrating surface sensors of various sizes and types, such as thermistors, film sensors, surface resistance thermometers, ribbon sensors, surface mount thermocouples, etc.
3.External reference platinum resistance thermometer to reduce calibration uncertainty
In order to achieve the ultimate in calibration accuracy, the design engineer deliberately reserved a thermometer socket at the bottom of the aluminum surface. platinum resistance thermometer with a diameter of 5 mm can be inserted as a standard for comparison and calibration, which greatly improves the calibration accuracy.
4.Excellent uniformity of temperature and surface finish on the calibration plane
Surface sensors are often difficult to calibrate because it is difficult to find a flat, uniform source of surface temperature.The DTZ-400 Surface Temperature Calibration System utilizes aluminum as the surface and has a high finish that ensures that the calibrated sensor is in good contact with the surface temperature calibrator, reducing calibration uncertainty. The DTZ-400 uses a special heating material and a constant temperature structure to make the surface temperature more uniform.
5.Temperature control is accurate, stable, and overshoot temperature is small
The device provides a variety of parameter options for the user to choose, including setting the PID parameters of the high,medium and low temperature segments, the inflection point between different temperatures, and the alarm temperature.
6.Portable and easy to use
The weight of the whole machine is only 3.5kg, which is small and portable.

TADT portable humidity generator is a portable and high-precision temperature and humidity calibration instrument, which can meet the needs of measurement and calibration of conventional temperature and humidity measuring instruments such as temperature and humidity sensors, temperature and humidity transmitters, small temperature and humidity meters, etc.
Functional characteristics
* Test chamber space up to (3~5) times that of similar products, providing more efficient test conditions
* The test chamber can accommodate various types of in-put cold-mirror-viewer probes for comparison and calibration
* Composite sensor jack design, suitable for various diameter temperature and humidity sensors and transmitters
* Transparent window and lighting design of measuring room to facilitate reading of various small temperature and humidity meters
* Can be calibrated simultaneously (10~15) with small temperature and humidity probes
* Calibrate (3-5) block size digital temperature and humidity meter simultaneously
* The test chamber provides temperature uniformity within 0.1 in a full range of 5~50
* Design of external drying cylinder, desiccant replacement can be operated on-line, convenient and simple
* Design of double-zone drying cylinder, supporting both molecular sieve and discolored silica gel
* Visual display of liquid level and dryer state is beneficial to state monitoring during work
* Provide 4 channel external (0~1) Vã??(0~5) V and (4~20) mA standard signal inputs
* The instrument has built-in humidity conversion software to facilitate users to convert relative humidity, temperature and dew point temperature
* Support temperature and humidity curve display, easy for users to view temperature and humidity state trend
* 7-inch color LCD touchscreen

Specifications:

Construction: open structure
Using method: transmitter/receiver
Center frequency: 23 +/- 1.0khz
Sound pressure level: 115 db min.
Sensitivity: -67 db min.
Capacitance: 2500pf +/- 20% at 1khz
Allowable input voltage: 80 vp-p
Directivity: 50 +/- 15 degree
Detectable range: 0.2 ~ 15m
Resolution: 10mm
Housing material: aluminum

Carton lined with foam tray

Features:
*Water proof and dual use
*Compact and light weight
*High sensitivity and sound pressure
*Less power consumption
*High reliability

Electrical and Mechanical Characteristics:
Type: LSPU1448FWAH09G, dia: 14mm, H: 9mm
Using Method: Dual use
Frequency: 48 +/- 1KHz
S.P.L: >= 85dB (30cm/10Vrms)
Sensitivity: >= -90dB/V/u bar
Capacitance: 2100pF+/-25% at 1KHz
Directivity: 110 x 50 degree
Allowable input Voltage: 160 Vp-p
Housing Material: Aluminum


carton lined with foam tray

Flow Sensor

DN 10 RRH-010

DN 25 RRH-025

Product Name: Sensor IC Substrate

Material: Shengyi SI10U

Minimum width / spacing: 35 / 35um

Surface: Immersion Gold

PCB thickness: 0.25mm

Layer: 4Layers

Structure: 1L-4L,1L-2L,3L-4L

Solder mask ink: TAIYO PSR4000 AUS308

Aperture: Laser hole 0.075mm, Mechanical hole 0.1mm

Application: Sensor IC Substrate

HPD05 Infrared PM2.5 Sensor Module Product Details
1. Module List
HPD05 Module

2. Product Overview
HPD05 PM2.5 Sensor Module use principle of optical scattering to measure concentration of dust inthe air,the module built in a Infrared Transmitter and a high sensitive Photoelectric Receiving Sensor the Infrared Transmitter emits light and the light meets the dust to produce the scotch light, theintensity of the scotch light detected by Photoelectric Receiving Sensor reflects the concentration ofdust in the air, HPD05 have two ways to output current concentration data, one is PWM signal (thewidth of signal is the value, 1ms = 1ug/m3), the other is IIC signal(unit is ug/m3).

HPD05 can be used for Air Cleaner, Air Conditioner with purifying function, Fresh Air System and air quality testing equipment.

3. Detecting Principle
Detecting Principle

Per the principle of optical scattering,the Transmitter emits light, and the light meets the dust to produce the scotch light, the high sensitive Photoelectric Receiving Sensor detects the intensity of the scotch light then output intensity signal, current which is proportional to the size and quality of intensity of the scotch light, the current is amplified by amplifier and calibrated by CPU, finally output digital PWM signal or IIC data of concentration of dust.

4. Performance Parameter
1 Characteristics

Characteristics

Connector CON2 Pin Description

Connector CON2 Pin Description

2 Life

Life of Light Source: above 5 years with continuous power on.

3 Photoelectricity Characteristics

Photoelectricity Characteristics

4 Signal Output

a1. PWM signal output(Corresponding Model HPD051Axxx):

Signal Output

The relation of Low Pulse Time and Dust Concentration: 1ms = 1ug/m3

The pulse width outputted by P1 pin is the average value of Dust Concentration(Lower responding speed, small fluctuation & good stability)

The pulse width outputted by P2 pin is the insta

Parking sensor system
Main features:
Bibi alarm sound;
Digital distance display ;
Close-fitting installation;
Insert-in ultrasonic sensors;
Left-right obstruction identification;
3 colors alarm;
Display size:78.5*28*21mm
Tech. Specifications:
Rated voltage:12v
Operating voltage range:10.516v dc
Rated current:10ma150ma
Detection distance:0.21.5(m)
Ultrasonic frequency:40khz
Working temperature of display:-30+70�

20 set per caton
15 / 16 kgs,
Dimension: 44cm x 34cm x 29cm

Ultrasonic Sensor Module HC-SR04 HC-SR04 Sensor Features
Operating voltage: +5V
Theoretical Measuring Distance: 2cm to 450cm
Practical Measuring Distance: 2cm to 80cm
Accuracy: 3mm
Measuring angle covered:

I. Product introduction

The DTBH zero-temperature thermostat is a device that can provide a stable and accurate zero-degrees Celsius temperature field for the thermocouple reference end for a long time. It is an ideal substitute for the traditional ice bucket and is very suitable for the verification / calibration of thermocouples. The technical specifications of the equipment are in full compliance with the new regulations "JJF1637-2017 Low-cost Metal Thermocouple Calibration Specification".

II. Product technical indicators

Model

DTBH-01 DTBH-03

Accuracy

0±0.05 0±0.03

resolution

0.001 0.001

stability

0.02/10min

Place of Origin:
California, United States
Brand Name:
Original
Model Number:
HMS K1C1 F5.5
Usage:
HMS K1C1 F5.5
Theory:
Sensor
Output:
Sensor
Lowest price:
Pls Contact us!
Lead time:
1-2days
Condition:
100% New and Original
WhatsApp:
+8613715255627
Shipment:
DHL/FEDEX/TNT/UPS/EMS.etc
More detail:
Contact us!!

Place of Origin:
USA
Brand Name:
Melexis
Model Number:
MLX90614ESF-BCF
Usage:
Temperature Sensor
Theory:
Ultrasonic Sensor
Description:
MLX90614ESF-BCF
Product name:
MLX90614ESF-BCF
Brand:
Melexis
Place of origin:
United States
Operation temperature:
-40â?? to +85â??
Output:
Digital Sensor
Condition:
Brand-new
Warranty:
1 Year
D/C:
+19

Place of Origin:
original
Brand Name:
original
Model Number:
OTP-638D2
Usage:
Other
Theory:
Other
Output:
Other
Description:
OTP-638D2
Color:
Original Color
Shipping Term:
DHL/TNT/FEDEX
Payment:
Union.Paypal TT
Delivery time:
3 working days
Quality:
original

Product name 10TP583T
operating temperature - 20 c to + 100 cpackage / case to-18
brand semitec
mounting style through hole
detectivity d-star at 500 f 14.7e7
cm hz1/2 / welement
size1.05 mm x 1.05 mm
noise equivalent power - nep2.2 nw/hz 1/2
photo sensitivity15 v/w
height 2.85 mm
length5.6 mm
operating temperature range- 20 c to + 100 c

Supplier of walk-in environmental test chamber. Designed to perform high-temperature operations for large-sized test specimens. The multipurpose walk-in chamber is the perfect site for testing the components against humidity, temperature, and various climate conditions.

General product

A temperature sensor is a sensor that senses temperature and converts it into output signal. The temperature sensor can accurately measures the ambient temperature and is widely used in agriculture, industry, workshops, warehouses and other places. This product measures the change in ambient temperature and outputs the temperature change value in the form of RS485 digital signal through inter processing. This product provides a temperature query command and provides digital signals at the same time. This product adopts RS485 half-duplex communication interface and is compatible with terminals with RS485 communication interface on the market, which is convenient for collecting temperature signals. The product has the characteristics of simple structure and convenient installation.

Scope of application

A variety of industries that require temperature, such as the food transportation industry, the pharmaceutical transportation industry, and temperature sensitive article storage industry.

Parameter description

supply voltage:DC9-30V

supply current:

General product

A temperature sensor is a sensor that senses temperature and converts it into output signal. The temperature sensor can accurately measures the ambient temperature and is widely used in agriculture, industry, workshops, warehouses and other places. This product measures the change in ambient temperature and outputs the temperature change value in the form of RS485 digital signal through inter processing. This product provides a temperature query command and provides digital signals at the same time. This product adopts RS485 half-duplex communication interface and is compatible with terminals with RS485 communication interface on the market, which is convenient for collecting temperature signals. The product has the characteristics of simple structure and convenient installation.

Scope of application

A variety of industries that require temperature, such as the food transportation industry, the pharmaceutical transportation industry, and temperature sensitive article storage industry.

Parameter description

supply voltage:DC9-30V

supply current:

General product

A temperature sensor is a sensor that senses temperature and converts it into output signal. The temperature sensor can accurately measures the ambient temperature and is widely used in agriculture, industry, workshops, warehouses and other places. This product measures the change in ambient temperature and outputs the temperature change value in the form of RS485 digital signal through inter processing. This product provides a temperature query command and provides digital signals at the same time. This product adopts RS485 half-duplex communication interface and is compatible with terminals with RS485 communication interface on the market, which is convenient for collecting temperature signals. The product has the characteristics of simple structure and convenient installation.

Scope of application

A variety of industries that require temperature, such as the food transportation industry, the pharmaceutical transportation industry, and temperature sensitive article storage industry.

Parameter description

supply voltage:DC9-30V

supply current:

Why I need it?

High relative humidity can cause significant, possibly irreparable damage to sensitive equipment, supplies, and products. To ensure dehydration measures work, humidity indicator cards measure the relative humidity (RH) inside sealed packages to allow immediate visual inspection of whether it has sustained unsafe humidity levels.

Why I need choose your product?

Existing humidity indicator cards found in the market are impregnated with a chemical called cobalt chloride In the dry state, cobalt chloride is blue in color. After absorbing moisture cobalt chloride changes to pink color. A recent amendment made to the European CEE directive 67-548 pertaining to the Classification, Packaging and Labeling of dangerous materials, has classified cobalt chloride as a carcinogenic material. Improper handling of items containing carcinogen may cause health hazards and environment hazards, thus, goods containing cobalt chloride will not meet EU standards.
Our new range of humidity indicator cards are carcinogen-free and meet EU standards and color change can be blue to pink, yellow to azure, blown to green.

Advantage:

Reversible
Competitive price
Bright color; high recognition
Meet ROHS, EU standards, SGS
A back film to prevent chemical to reverse to your products  
Using environmentally friendly ink and moisture-sensitive chemical

Usage :

1. The humidity indicator spots will change from blue (dry condition) to pink (humidity condition) as the relative humidity changes in the volume of air surrounding the indicator.

2.Relative humidity is indicated at the lavender color.
3.Indicator spots will change within eight hours of being exposed to a change in relative humidity.
4.The humidity indicator spots are reversible, and the pink spots will change back to blue when the volume of air is dried. Humidity indicator cards with pink or lavender spots can be returned to a blue color by placing indicators in a sealed container with 33 grams (1 unit) of desiccant for four hours. However, we do not recommend reversing or using cards that have been exposed to high humidity in excess of 60 percent.
5.The highest humidity indicator spot should be blue before being put into use.
6.The humidity indicator will be at its most accurate at a temperature of 23 degrees Celsius 72 degrees Fahrenheit.
7.Avoid contact with indicator spots. Wash any irritated areas with clean water.

The US-series ultrasonic sensor uses the principle of high-frequency ultrasonic linear propagation to detect the edge position of the coil. Compared with the photoelectric sensor, it is not affected by the transparency of the materials, so it is very convenient to use without calibration.

1. Support analog/switch output, can be used with EPC-A10 or EPC-D12 correction controller
2. Suitable for opaque, transparent, ultra-transparent film edge application
3. No need to manually adjust the calibration
4. 200K ultrasonic beam
5. 1ms reaction time
6. The detection range is 5mm, the detection accuracy is 0.1mm
7. With offset display

Order Details
Item Name: US-400S/US-500 Ultrasonic Sensor
MOQ(Minimum Order Quantity): 1pc
Lead time: 1-2 days after receiving the deposit
Calculated Packing Size: 20cm*10cm*10cm,1.5kg/pc
Package: Carton/Wooden Box
Price Term: EXW,FOB, CIF, etc
Payment term: TT, L/C,Western Union
Country of Origin: China