Envisys manufacture and supply standard range of salt spray corrosion test chambers. We provide cyclic corrosion chamber in different versions, mini, mid-range, & walk-in range salt spray chamber for simulating salt mist (fog) conditions to check corrosion resistance testing of materials & surface coatings
Cyclone Dust Collector is a system used to enhance the quality of air released from industrial and commercial processes by collecting dustand other impurities from air or gas. Designed to handle high-volume dust loads, a dust collector system consists of a blower, dust filter, a filter-cleaning system, and a dust receptacle or dust removal system. It is distinguished from air purifiers, which use disposable filters to remove dust.
Multiple-cyclone separators consist of a number of small-diameter cyclones, operating in parallel and having a common gas inlet and outlet, as shown in the figure, and operate on the same principle as single cyclone separatorsâ??creating an outer downward vortex and an ascending inner vortex.
Multiple-cyclone separators remove more dust than single cyclone separators because the individual cyclones have a greater length and smaller diameter. The longer length provides longer residence time while the smaller diameter creates greater centrifugal force. These two factors result in better separation of dust particulates. The pressure drop of multiple-cyclone separators collectors is higher than that of single-cyclone separators, requiring more energy to clean the same amount of air. A single-chamber cyclone separator of the same volume is more economical, but doesn't remove as much dust.
Cyclone separators are found in all types of power and industrial applications, including pulp and paper plants, cement plants, steel mills, petroleum coke plants, metallurgical plants, saw mills and other kinds of facilities that process dust.
Thermal shock test chamber used to test the extent of the structure of materials or composite materials in an instant extremely high temperature and low temperature in a continuous environment in order to test chemical changes or physical damage in the shortest possible time caused by thermal expansion and contraction.
Main parameters:
Test method Pneumatic operated door switch 3 chambers
Inner dimension (w*d*h) 500*450*450mm
External dimension (w*d*h) 1380*1370*1980mm
Temperature range -40 ~ +80
High temperature chamber pre-heating range 60 ~ 100
Heating speed +60+100 about 10 minutes
Low temperature chamber pre-cooling range -65 ~ 0
Cooling speed Ambient -65 about 65 minutes
Temperature deviation ±3
Thermal recovery time Within 5 minutes
External material Antirust processing cold-rolled steel sheet
Internal material Sus#304 stainless steel
Thermal insulation material Polyurethane foam and fiberglass
Coolant R404a / r23
Cooling method Air cooling
Pressure 0.2 - 0.5mpa
Power supply Three phase, 380v, 50hz
Features:
1.Perfect appearance and easy to operate.
2.Japan lcd english microcomputer temperature controller, with high memory capacity, can save 100 programs, max 9999 cycles, each cycle max time 999hrs.
3.Three chamber structures, high temperature chamber, low temperature chamber and test chamber, control automatically, stay and switch time adjustable.
4.Perfect protection alarm functions: short-circuits, leakage, over temperature of work chamber; compressor over pressure, over load, short water?¦
5.Control interface will display alarm reason and provide check methods, machine has emergency stop button.
6.Cold and hot shock temperature recover within 5 minutes, which complies with mtl, iec, jis, gjb and other international standards.
7.With rs-232c communication port for connecting pc to control, record and save test report.
Activated carbon, also known as activated charcoal, is a form of carbon processed to have small, low-volume pores that increase its surface area. This increased surface area makes activated carbon highly effective for adsorptionâ??a process by which molecules and ions adhere to the surface. Here are some key points about activated carbon:
Production: Activated carbon is typically produced by heating carbonaceous materials, such as wood, peat, coconut shells, or sawdust, in the presence of a gas that does not react with the material, creating a porous structure.
Porous Structure: The activation process creates a highly porous structure with a large surface area. This structure allows activated carbon to adsorb a wide range of substances onto its surface.
Adsorption Properties: Activated carbon is widely used for adsorbing various impurities and contaminants from liquids and gases. It can effectively remove organic compounds, chemicals, odors, and even some metals.
Applications: Activated carbon finds diverse applications in various industries, including water treatment, air purification, food and beverage processing, pharmaceuticals, and environmental cleanup. It is used in water filters, air purifiers, gas masks, medical treatments, and more.
Water Purification: Activated carbon is commonly used in water treatment processes to remove impurities, chlorine, organic contaminants, and undesirable odors, improving the taste and quality of water.
Air Purification: In air purification systems, activated carbon filters can capture and remove volatile organic compounds (VOCs) and other airborne pollutants, contributing to cleaner air.
Medical Uses: Activated carbon is used in certain medical treatments and poison control efforts. It can be administered orally to absorb toxins in the gastrointestinal tract.
Gold Recovery: Activated carbon is also used in the gold mining industry for the recovery of gold from cyanide solutions.
Environmental Remediation: Activated carbon is employed in environmental cleanup efforts to adsorb pollutants from soil and water, aiding in the remediation of contaminated sites.
Reactivation: Activated carbon can sometimes be regenerated or reactivated after use by exposing it to high temperatures to remove adsorbed impurities, allowing it to be reused.
Activated carbon's versatility and adsorption capabilities make it a valuable material in numerous applications where purification and removal of contaminants are essential.
Firefighter protective Clothing: 2019 models:
Clothing outer fabric: The use of 210g arylon three anti-fabric, which not only has a permanent flame retardant, high temperature resistance, acid and alkali resistance and other properties, and its strong performance is very excellent, with high heat insulation, permanent flame retardant, high strength, anti-cutting, acid and alkali resistance, arc resistance and other characteristics, improve the overall protection performance of clothing, clothing overall main technical parameters are much higher than the industry standard and bidding technical requirements. The fire retardant performance of the firefighter\'s fire extinguishing suit: the warp and weft continuous burning time is 0s, the warp and weft damage length is less than 51mm; Breaking strength: longitude and latitude 1000N; Tear strength: longitude and latitude 120N; Moisture resistance 3, thermal stability: change rate 1.0%; Color fastness: Color resistance 4, water friction resistance 4.
Waterproof breathable heat insulation layer: aramid non-woven fabric and flame retardant PTFE film, gram weight 180g/m2. It can not only prevent the infiltration of water and other general liquid chemicals, but also discharge a large amount of hot gas generated in the body during fire rescue in time. The fabric has hydrostatic pressure & 50kPa, moisture permeability 5439g/m2/24h, oil-repellent performance 3, and thermal shrinkage 1%.
Comfort layer: The use of intermediate arylon fiber and flame retardant viscose fiber blended, gram weight 125g/m2, flame retardant performance, thermal stability and other properties are very good.
uter through the computer operation furnace free software more information see: computer control system.
Heating faster (heating rate 1 ¡æ / h to 40 ¡æ / min adjustable).
Energy saving (furnace imported fiber production and become, high temperature resistant, resistant to sudden heat quench)
Furnace body the delicate coating corrosion resistance to acid and alkali,
Furnace and furnace isolation adopt the cold furnace wall temperature close to room temperature.
Double circuit protection (over-temperature, over-pressure, super flow, section i, cut power, etc.)
Imported refractory materials, excellent heat preservation performance, high temperature resistant.
Temperature category: 1200 ¡æ 1400 ¡æ 1600 ¡æ 1700 ¡æ 1800 ¡æ
Model Dimension of working room Overall dimension Power
Lrhs-512-ps 800*800*800mm 1280*1260*1770mm 2.5kw
Lrhs-800-ps 800*1000*1000mm 1280*1460*1970mm 2.5kw
Lrhs-1000-ps 1000*1000*1000mm 1480*1460*1970mm 2.5kw
Lrhs-1500-ps 1000*1500*1000mm 1540*1960*2100mm 2.5kw
Time setting range:1~999h adjustable
Air speed:not exceed 2m/s
Lowing dust method:continous, period blowing dust time setting is optional
Sand and dust concentration:2~4kg/m3
Test dust:dry talcum powder, silicate cement, smoke ash, etc.
Dust heat:use stainless steel mica heating coil constant control to prevent dust adhesion
Vibration time:1~99h59m59s
Power supply requirement:ac380v±10%50±0.5hz
ALTITUDE TEST CHAMBER
Altitude test chambers combine temperature and altitude with optional humidity for simultaneous environment testing.
Features
External pressure type box body structure and stainless steel tank design, rational air circulation system and scientific layout of heating, refrigerating system.
Adopts international brand of imported parts for cooling system to improve operation reliability
High precision and stable performance with touch screen controller, friendly Man-Machine interface.
Multiple layers of safety device to easy maintenance.
Standards Implement and Met
GB11159-89
GB10590-89
GB15091-89
GB/T2423.25-1992
GB/T2423.26-1992
GJB150.0-86
Specifications
1. Dedicatetouch and excellent user experience
2. Unique and compact design, top grade appearance, stable performance and easy operation
3. Can simulate a wide rang of temperature and humidity environments
4. Capable of testing large components, assemblies, and finished products
5. Customized sizes and configurations available
6. One year warranties
