Please click here to check who's online and chat with them.

Find Verified Printing Inks Suppliers, Manufacturers and Wholesalers

Oct-16-23
Supplier From Pelabuhan Klang, Selangor, Malaysia
 
Printing Parameters

Squeege: 60-65 SHORE
Mesh: 120/inch
Tension:� 25 N/cm2
Clean Up: Water
Strokes: 3
Rounds: 2

Printing Application

1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 - 4 hours ambient drying.
3. Heat cure at 130 -160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.

Formulation
White Print
White: 97%
Fixer: 3%
Colour Print
White: 15-20%
Clear: 70-75%
Colour Pigment: 5-7%
Fixer: 3%
Oct-16-23
Supplier From Pelabuhan Klang, Selangor, Malaysia
 
Printing Parameters

Squeege: 60-65 SHORE
Mesh: 120/inch
Tension:� 25 N/cm2
Clean Up: Water
Strokes: 3
Rounds: 2

Printing Application

1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 - 4 hours ambient drying.
3. Heat cure at 130 -160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.

Formulation
White Print
White: 97%
Fixer: 3%
Colour Print
White: 15-20%
Clear: 70-75%
Colour Pigment: 5-7%
Fixer: 3%
Oct-16-23
Supplier From Pelabuhan Klang, Selangor, Malaysia
 
Printing Parameters

Squeege: 60-65 SHORE
Mesh: 120/inch
Tension:� 25 N/cm2
Clean Up: Water
Strokes: 3
Rounds: 2

Printing Application

1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 - 4 hours ambient drying.
3. Heat cure at 130-160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.

Formulation
White Print
White: 97%
Fixer: 3%
Colour Print
White: 15-20%
Clear: 70-75%
Colour Pigment: 5-7%
Fixer: 3%
Oct-16-23
Supplier From Pelabuhan Klang, Selangor, Malaysia
 
Printing Parameters

Squeege: 60-65 SHORE
Mesh: 120/inch
Tension:� 25 N/cm2
Clean Up: Water
Strokes: 3
Rounds: 2

Printing Application

1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 â?? 4 hours ambient drying.
3. Heat cure at 130 â?? 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.

Formulation
White Print
White: 97%
Fixer: 3%
Colour Print
White: 15-20%
Clear: 70-75%
Colour Pigment: 5-7%
Fixer: 3%
Oct-16-23
Supplier From Pelabuhan Klang, Selangor, Malaysia
 
Printing Parameters

Squeege: 60-65 SHORE
Mesh: 120/inch
Tension:� 25 N/cm2
Clean Up: Water
Strokes: 3
Rounds: 2

Printing Application

1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 - 4 hours ambient drying.
3. Heat cure at 130 -160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.

Formulation
White Print
White: 97%
Fixer: 3%
Colour Print
White: 15-20%
Clear: 70-75%
Colour Pigment: 5-7%
Fixer: 3%
1404 Printing Inks Suppliers
Short on time? Let Printing Inks sellers contact you.
Oct-16-23
Supplier From Pelabuhan Klang, Selangor, Malaysia
 
Printing Parameters

Squeege: 60-65 SHORE
Mesh: 120/inch
Tension: 25 N/cm2
Clean Up: Water
Strokes: 3
Rounds: 2

Printing Application

1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 -4 hours ambient drying.
3. Heat cure at 130- 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.

Formulation
White Print
White: 97%
Fixer: 3%
Colour Print
White: 15-20%
Clear: 70-75%
Colour Pigment: 5-7%
Fixer: 3%
Oct-16-23
Supplier From Pelabuhan Klang, Selangor, Malaysia
 
Printing Parameters

Squeege: 60-65 SHORE
Mesh: 120/inch
Tension: 25 N/cm2
Clean Up: Water
Strokes: 3
Rounds: 2

Printing Application

1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 - 4 hours ambient drying.
3. Heat cure at 130- 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.

Formulation
White Print
White: 97%
Fixer: 3%
Colour Print
White: 15-20%
Clear: 70-75%
Colour Pigment: 5-7%
Fixer: 3%
Oct-16-23
Supplier From Pelabuhan Klang, Selangor, Malaysia
 
Printing Parameters

Squeege: 60-65 SHORE
Mesh: 120/inch
Tension: 25 N/cm2
Clean Up: Water
Strokes: 3
Rounds: 2

Printing Application

1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 - 4 hours ambient drying.
3. Heat cure at 130- 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.

Formulation
White Print
White: 97%
Fixer: 3%
Colour Print
White: 15-20%
Clear: 70-75%
Colour Pigment: 5-7%
Fixer: 3%
Oct-16-23
Supplier From Pelabuhan Klang, Selangor, Malaysia
 
Printing Parameters

Squeege: 60-65 SHORE
Mesh: 120/inch
Tension: 25 N/cm2
Clean Up: Water
Strokes: 3
Rounds: 2

Printing Application

1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 - 4 hours ambient drying.
3. Heat cure at 130 - 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.

Formulation
White Print
White: 97%
Fixer: 3%
Colour Print
White: 15-20%
Clear: 70-75%
Colour Pigment: 5-7%
Fixer: 3%
Oct-16-23
Supplier From Pelabuhan Klang, Selangor, Malaysia
 
Printing Parameters

Squeege: 60-65 SHORE
Mesh 120/inch
Tension: 25 N/cm2
Clean Up: Water
Strokes: 3
Rounds: 2

Printing Application

1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 -4 hours ambient drying.
3. Heat cure at 130 - 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.

Formulation
White Print
White: 97%
Fixer: 3%
Colour Print
White: 15-20%
Clear: 70-75%
Colour Pigment: 5-7%
Fixer: 3%
Oct-16-23
Supplier From Pelabuhan Klang, Selangor, Malaysia
 
Printing Parameters

Squeege: 60-65 SHORE
Mesh: 120/inch
Tension:� 25 N/cm2
Clean Up: Water
Strokes: 3
Rounds: 2

Printing Application

1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 -4 hours ambient drying.
3. Heat cure at 130 - 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.

Formulation
White Print
White: 97%
Fixer: 3%
Colour Print
White: 15-20%
Clear: 70-75%
Colour Pigment: 5-7%
Fixer: 3%
Oct-16-23
Supplier From Pelabuhan Klang, Selangor, Malaysia
 
Printing Parameters

Squeege: 60-65 SHORE
Mesh: 120/inch
Tension: 25 N/cm2
Clean Up: Water
Strokes: 3
Rounds: 2

Printing Application

1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 - 4 hours ambient drying.
3. Heat cure at 130 - 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.

Formulation
White Print
White: 97%
Fixer: 3%
Colour Print
White: 15-20%
Clear: 70-75%
Colour Pigment: 5-7%
Fixer: 3%
Oct-16-23
Supplier From Pelabuhan Klang, Selangor, Malaysia
 
Printing Parameters

Squeege: 60-65 SHORE
Oct-16-23
Supplier From Pelabuhan Klang, Selangor, Malaysia
 
Printing Parameters

Squeege: 60-65 SHORE
Mesh: 120/inch
Tension: 25 N/cm2
Clean Up: Water
Strokes: 3
Rounds: 2

Printing Application

1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 - 4 hours ambient drying.
3. Heat cure at 110 - 135oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.

Formulation
White Print
White: 97%
Fixer: 3%
Colour Print
White: 15-20%
Clear: 70-75%
Colour Pigment: 5-7%
Fixer: 3%
Oct-16-23
Supplier From Pelabuhan Klang, Selangor, Malaysia
 
Printing Parameters

Squeege: 60-65 SHORE
Mesh: 120/inch
Tension:� 25 N/cm2
Clean Up: Water
Strokes: 3
Rounds: 2

Printing Application

1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 - 4 hours ambient drying.
3. Heat cure at 130 -160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.

Formulation
White Print
White: 97%
Fixer: 3%
Colour Print
White: 15-20%
Clear: 70-75%
Colour Pigment: 5-7%
Fixer: 3%
Oct-16-23
Supplier From Pelabuhan Klang, Selangor, Malaysia
 
Printing Parameters

Squeege: 60-65 SHORE
Mesh: 120/inch
Tension: 25 N/cm2
Clean Up: Water
Strokes: 3
Rounds: 2

Printing Application

1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 - 4 hours ambient drying.
3. Heat cure at 130 - 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.

Formulation
White Print
White: 97%
Fixer: 3%
Colour Print
White: 15-20%
Clear: 70-75%
Colour Pigment: 5-7%
Fixer: 3%
Oct-16-23
Supplier From Pelabuhan Klang, Selangor, Malaysia
 
Printing Parameters

Squeege: 60-65 SHORE
Mesh: 120/inch
Tension:� 25 N/cm2
Clean Up: Water
Strokes: 3
Rounds: 2

Printing Application

1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 - 4 hours ambient drying.
3. Heat cure at 130 -160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.

Formulation
White Print
White: 97%
Fixer: 3%
Colour Print
White: 15-20%
Clear: 70-75%
Colour Pigment: 5-7%
Fixer: 3%
Oct-16-23
Supplier From Pelabuhan Klang, Selangor, Malaysia
 
Silkflex Nylon Oxal
Oct-16-23
Supplier From Pelabuhan Klang, Selangor, Malaysia
 
Silkflex Crosslinker
Oct-16-23
Supplier From Pelabuhan Klang, Selangor, Malaysia
 
Silkflex Eco Oxal
1404 Printing Inks Suppliers
Short on time? Let Printing Inks sellers contact you.
See what buyers and suppliers are discussing in Printing Inks import export community