Printing Parameters
Squeege:Â 60-65 SHORE
Mesh 120/inch
Tension:Â 25 N/cm2
Clean Up: Water
Strokes:Â 3
Rounds:Â 2
Printing Application
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 -4 hours ambient drying.
3. Heat cure at 130 - 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
Formulation
White Print
White: 97%
Fixer: 3%
Colour Print
White: 15-20%
Clear: 70-75%
Colour Pigment: 5-7%
Fixer: 3%
Printing Parameters Squeege: 60-65 SHORE Mesh: 120/inch Tension:� 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 -4 hours ambient drying. 3. Heat cure at 130 - 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%
Printing Parameters Squeege:Â 60-65 SHORE Mesh:Â 120/inch Tension:Â 25 N/cm2 Clean Up:Â Water Strokes:Â 3 Rounds:Â 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 - 4 hours ambient drying. 3. Heat cure at 130 - 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%
Printing Parameters Squeege:Â 60-65 SHORE
Printing Parameters Squeege: 60-65 SHORE Mesh: 120/inch Tension:� 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 - 4 hours ambient drying. 3. Heat cure at 130 -160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%
