Find Verified Amplifiers Suppliers, Manufacturers and Wholesalers

High power isolators.

Waveguide circulator

Characteristics

Covering wide frequency range163;187;low phase noise163;187;good frequency strucm163;187;wide working temperature range163;187;universal sma rf out and in interface

Application
Used in microwave measuring instruments, frequency synthesizer, broad band radar recivers and ew systems

Description
Covering frequency range 8ghz161;162;8161;171;10ghz, etc163;172; low noise design contributes to the excellent low phase noise output)163;187;all the products can be offered both indenpendently and combining with special analog

Paper box, or customized.

1. FM/AM stero controlling modulation

2. Using TOSHIBA TA8127N IC

3. Without screen cover, fulfill electromagnetic compatibility demand.

4. Playback super-DVD disk, the number of single disk could be over eight
hours.

5. 3000 pcs KARAOKE song without changing disk, also support USB function without disk playback.

6. During playback MP3 disk, the system can remember the fixed MP3 playback sequence without power supplying.

7. Digital multiplication of AV to VGA mode to realizing video signal transferring completely.

8. The algorithm of combination in software and hardware to realizing one by one scan function

9. with colorful XP Chinese and English pop-ups menu, iconic design.

10. Fully support DOLBY AC-3, compatibility with HDCD and other digital video form.

11. Playback with MP3 and JPEG simultaneously.

12. Compatibility with SUPER-DVD, SVCD, VCD, DVCD, MP3,CD, HDCD and CD-R/RW disk.

13. Can imitate the output mode of concert hall, theater and athletic fieldí»s sound effect

14. Music dynamic spectrum-super-sonic function.

15. Interlock function for the controlling key.

16. Cassette has recorder and playback function.

17. With Guitar input jack.

18. Wireless microphone inside.

19. Automatic exchange for AC 220V/50HZ and DC12V34A (rechargeable battery) supply, and car power supply function.

20. The max power is 120W, continuously playback with music in 3-8 hours.

Detailedú¦
1. SMD electronic hardware,SMT technologyical maintain high quality.
2. Corrar clip transmitter,high sensitivity,prevent howling,clear timbre.
3. Quartz surge circuitry,steady frequency without disturbance.
4. 65 group VHF 180-265MHz.no disturbance in frequency,have large scope for selection.
5. Two kind of power to choose:built-in rechargeable battery,external 12V DC.
6. When use the DC sudden power off,embedded storage battery auto-work.
7. Wire and wireless microphone loadspeaker.
8. With digital reverberation.
9. Collar clip microphone and handhoid microphone for your choice.
DVD function.

Output Power:2X75W(8ª+)
2X90W (4I)
Frenquency Response:20Hz-20KHzí+3dB
Input Sensitivity:250mv
SNR:85dB
Distortion: <0.5%
Power Voltage: 220-240V/50-60Hz
Height X With X Depth: 150 X 430 X 325mm
Weight: 8kg

Output Power:2X75W(8ª+)
2X90W(4ª+)
Frenquency Response:20Hz-20KHzí+3dB
Input Sensitivity:250mv
SNR:85dB
Distortion:<0.5%
Power Voltage:220-240V/50-60Hz
HeightXWithXDepth:150X430X325mm
Weight:8kg


a gift of each or two pcs in a carton

The modules are with features of excellent linearity, extremely low noise, very excellent flatness, standard catv outline, rugged construction etc.

Wafer forward amplifier modules

GA500 mini digital amplifier

Introduction
C-mark ga500 digital mini amplifier, powered by built-in integrative digital power amplifier, features light weight, high efficiency, best sound, safe protection, incredible compatibility of electromagnetism and open choices of 110vac&220vac power supply.

Features
1. Plug & play, user-friendly, clear indication, easy manipulating for nonprofessionals.

2. The digital power amplifier features best sound, high efficiency and high reliability.

3. Complete protection from short circuit, over surge current, over heat, over voltage, power limiting, over temperature frees users from worry of malfunction.

4. The amplifier can be configured three output modes, stereo, mono and bridged. Signal input/output adopts ª)6.35 stereo interface for balance signal transmission.

5. Suitable for many applications like commercial, company, entertainment, school and army etc.

Specifications
Output power

8ª+: 300w x 2 (1khz)

4ª+: 600w x 2 (1khz)

Bridged

8ª+: 1000w (1khz)

Free power combination from 1pcs to 7pcs in a standard rack as you like, if 7 pcs combined, max power can reach 8ª+ 300w x 14=4200w;4ª+ 600w x 14=8400w;8ª+ bridged 1000w x 7 =7000w channel.
Input sensitivity: 0db

Input impedance : 20kª+ú¿ balance ú¬ 10kª+ú¿ unbalance ú¬

Frequency response : >20í½20khz @8ª+

Thd+n: 0.01% ú¿1khz, 1wú¬

S/n: 110dbú¿ a weighted ú¬

Power supply : ac110v/220vú¿ two kinds power supply ú¬

Fuse cube current : 20aú¿ac110vú¬ 10aú¿220vú¬




Net weight : 3kg

Gross weight : 3.5kg

Net dimension ú¿l*w*hú¬: 387 *155 * 57 mm

Amplifier

Mixer
Maximum output level:19dbm1khz, thd=0.5%
Residual noise: -80db
S/n:85db
Equivalent input noise:-120dbm
Headphone power:40mw1khz, thd=0.5%, 200+
Equalization: low 80hz+15db
Mid 2.5khz+15db
High 12khz+15db
Gain control:mono -55db~0db
Tape -10db~0db
Frequency response:20hz~20khz+1db
Thd+n:_0.05%1khz, 0.775v


Gift box

PHI CATV Amplifier

Amplifier
Parameters unit p-pa1200 p-pa1500 p-pa2500 p-pa3500
Output power stereo @ 8 ohm watt 2x400 2x550 2x700 2x1000
Output power stereo @ 4 ohm watt 2x600 2x800 2x1100 2x1500
Output power bridged @ 8 ohm watt 1000 1500 2000 2800
Frequency response hz 20hz-20khz; +0.1/-0.3db (1w / 8 ohm)
T.H.D db <0.1%@350w into 8+(60hz&7khz) <0.1%@550w into 8+(60hz&7khz) <0.1%@700w into 8+(60hz&7khz) <0.1%@1500w into 8+(60hz&7khz)
Voltage gain 68x standard 86x standard 97x standard 110x standard
Slew rate v/us 40v/us
Input impedance oh 20k ohm, balanced
10k ohm, unbalanced
Hum and noise db -103db
Cross talk db <60db
Indicators (per channel) temp/dc led, clip led, signal led, power led, bridge led
Protection temperature, /dc, sub/ultra -sonic, sonic, short circuit, igm, output
Connections 3-pin xlr female & 1/4÷ phone jack for input; speakon & banana plug for output
Cooling 2 variable speed dc fans
Controls 2 front pan attenuators, rear panel signal ground lift jumper

Dimension (unpacked) mm 133x483x450 133x483x450 133x483x510 133x483x510
Carton size mm 235x545x545 235x545x545 235x545x605 235x545x605
Net weight (unpacked) kg 24 25 31 34
Gross weight kg 25 26 32 35
Pcs / 20" cl pcs 400 400 359 359
Pcs / 40" cl pcs 829 829 744 744
Pcs / hq cl pcs 971 971 872

Professional sound box
Type of this modelapplication to karaoke object, ballroom, other assistant+outdoor
Frequency response 50hz-18khz(3db)
Recommendatory input power 300w
P.M.P.O 400w
Sensitivity 97db(1-1m)
Impedance 8
Speaker unit Low-15"-1 horn
other
Polar pattern 90ph-40pv
Color ruby-red /black
Amplifier at optionAk-180

N.W. 26 kgs / 57.3 lbs
G.W. 29 kgs / 63.9 lbs
L - w - h, box 16.1"-16.1"-25.6" / 410x410x650 mm
L - w - h, package 18.5"-18.5"-28.0" / 470x470x710 mm

Professional power amplifier
Frequency response20hz-20khz
Impedance47
Thd (1khz, aux 150mv input)_0.1%
Sensitivity180mv
Average power(4+)350w+350w
S/n90db

N.W.10 kgs/ 22 lbs
G.W.12 kgs / 26.4 lbs
L - w - h, box:16.9"-14.2"-5.7" / 430-360-145mm
L - w - h, package: 18.5"-15.7"-7.7" / 470-400-195mm
Colors ˜ silvery / ˜black

CATV amplifier
High-performance 550MHZ, 750MHZ, 860MHZ two-way trunk amplifier
High-performance 550MHZ, 750MHZ, 860MHZ two-way collective power supply unit
High-performance 750MHZ, 860MHZ, 1000MHZ two-way field trunk feeding splitter
High-performance 1000MHZ two-way splitter & distributor sealed with tin
High-performance three-net-in-one special customer cover
Special optical junction 60V UPS power

High Power RF Amplifier 0.1MHz ~ 20GHz VHF UHF Broadband 1W to 2500W 2G/3G/4G/5G GSM CDMA LTE RN Telecom GPS UAV antenna radio radar satellite communications phone signal amplifier repeater

UIY Inc. was established in 2003,it is a RF Microwave Componets Manufacturer.

Products: RF Circulator, RF Isolator, RF Filter, RF Amplifier, Power Divider/Splitter, Duplexer, Triplexer, Tx Comber, Rx Splitter, Tx & Rx Multicoupler, Hybrid Combiner, Coaxial Termination, Coaxial Attenuator, Directional Coupler, Waveguide to Coaxial Adapter.

Due to the diversity of specifications, it is impossible to display all products. If you have requirements for parameters such as frequency, power consumption, insertion loss, connector type and size, please visit our website, including product images, design drawings, testing machine reports, etc. In addition, in order to save your precious time, you can contact us directly to tell us the parameters and requirements of the products you want to customize. We will recommend a variety of customization schemes for you to choose according to the process and cost.

The purpose of the isolating amplifier RISH Ducer TV 808 is to electrically insulate input and output signals, respectively to amplify and / or change the signal level or type (current or voltage) of the input signals. The amplifier fulfils all the important requirements and regulations concerning electromagnetic compatibility EMC and safety (IEC 1010 resp. EN 61 010). It was developed and is manufactured and tested in strict accordance with the quality assurance standard ISO 9001. The device has two channels and provides two independent isolating amplifiers in an extremely small space. The user has a wide choice of input and output ranges and can set the desired one with the aid of soldered jumpers (coarse adjustment) and potentiometers (fine adjustment)

WSPS-2450-5000 Solid State Power Generator is specially designed for ISM application. It provides higher than 5kW RF Power, and it can work at CW(Continuous Wave) and pulse status. The features of this product are:Accurate output power adjustment from 10-5000W. Accurate output phase adjustment from 0-360 degree.Accurate duty cycle adjustment under pulse mode. PLL phase-locked technology ensure a high frequency stability Built in circulator and load enable the SSPG adapt to kinds loads that have different VSWR Reasonable protection circuit guarantee a reliable operation.