Please click here to check who's online and chat with them.

Energy-Saving 0.5T Induction Melting Furnace

Supplier From China
Jan-23-19

Equipment type :
Device parallel resonant frequency pulse power supply 12 and two steel coreless induction melting furnace and auxiliary systems required for normal operation of the equipment.
0.5 tons of steel induction melting furnace main parameters:
in
frequency
sense
should
melt
Refining
furnace Rated Capacity t 0.5
Maximum capacity t 1
Iron temperature °C 1450~1 8 00
Melting power consumption (hot furnace, molten steel) Kwh/t 570 ± 5% in the case of pure melting .
Melting consumption (heating furnace,molten iron) Kwh/t 560 ± 5% in the case of pure melting .
Melting rate (steel steel) h/t 0.9
cold
but
water Influent flow M3/h � 40
Inlet pressure MPa 0.3
Inlet temperature °C � 32
Backwater temperature °C � 52
Tilting method   Hydraulic tilting
 
whole
flow
change
Pressure
Device Product number ZS -type
Voltage combination 10KV/380V/380V
Secondary side Î? /Y double winding, star winding midpoint extraction
Transformer capacity KVA 1000kva(two shared)
Primary voltage KV 10 ± 5% KV
Secondary voltage V 380 � 2
Phase Primary side 3 phase ; secondary side 6 phase connected to intermediate frequency power supply cabinet
frequency HZ 50
Connection group DdOY11 ( secondary side line voltage phase difference of 30° )
Short circuit impedance â?¥ 9%
cooling method ONAN,cooling medium: 25thtransformer oil
Pressure regulation method Automatic non-excitation voltage regulation ,
effectiveness â?¥ 98%,
Executive standard JB/T8636-1997 "Power Converter Transformer"
Rectifier transformer
The rectifier transformer is used to reduce the primary high voltage to the input voltage suitable for the intermediate frequency power supply. The device uses a dedicated high-impedance oil-immersed self-cooling rectifier transformer, the model is ZS series. The primary voltage of the transformer is 10KV and the secondary voltage is 380V . The rectifier transformer is equipped with a gas relay and a oil temperature relay table, which can be interlocked with the high voltage cabinet. When the transformer has gas or oil temperature exceeding the standard, the high voltage input can be automatically cut off and an alarm is issued.
 
in
frequency
Electricity
source
 
 
  rated power KW 5 00
DC voltage V 102 4
DC A 488
Number of commutating pulses pulse 12
cold
but
water Influent flow M3/h � 15
Inlet pressure MPa 0.25
Inlet temperature °C � 32
Backwater temperature °C � 42
IF voltage V 2400
IF frequency Hz 8 00 can be fine-tuned
Power factor C OSÏ? â?¥Â 0.95 for any power usage
Inverter form   Parallel inverter
noise dB 85dB
Starting success rate   100%
     
     
     
       

Price and Minimum Quantity

Price: $1
MOQ: Not Specified

Recent User Reviews

This user has not received any reviews yet!

Verification Status


 
 
Contact Supplier
Renew

More Items Similiar to: Energy-Saving 0.5T Induction Melting Furnace

GOLD Member
VERIFIED
Jul-04-03
Buyer From Navi Mumbai, Maharashtra, India
GOLD Member
Feb-18-21
 
Heat Area - 100m2
Dimension(W*H*D) - 450*975*782mm
Weight - 70kg
Air inlet pipe - 50mm
Air outlet pipe - 80mm
Auto-burning Time - 13h-27h
Fuel Consumption - 0.8-1.8kg/h
Efficiency - 90%
Hopper Capacity - 20kg
Electronic consumption - 100-400w/h
Rating voltage - 230v
GOLD Member
Mar-14-17
Supplier From Boston, MA, United States
GOLD Member
May-15-15
Supplier From Pleasanton, California, United States
GOLD Member
VERIFIED
Jan-29-25
 
Lamp Parts
GOLD Member
Jul-15-17
Supplier From Huizhou, Guangdong, China
GOLD Member
VERIFIED
Mar-30-23
Supplier From Southampton, United Kingdom
 
We are glad to propose 500 MT of stain less steel mill scale.
Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products.

At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel.

The recovery ratio after melting in furnace for the most valuable alloy elements is:
- Ni: 3.5 - 4.5%
- Cr: 6-8%


From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows:

Waste code: 10 02 10

The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers.

Chemical analysis of the material is available on request.
GOLD Member
VERIFIED
Nov-15-19
Supplier From Southampton, United Kingdom
 
Waste Specification:
European Classification: E46
EWC Code: 19.01.02
Basel Code: B10 10

The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans.

At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.

The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.

The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.

The collected stock, is stored in open air, on cemented flooring.

Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace.

Please feel free to contact us for further details
GOLD Member
VERIFIED
Jan-15-20

Plate Iron Scrap

MOQ: 200  Square Yards
Supplier From Southampton, United Kingdom
 
Plate Iron Scrap is a material that a visual inspection appears of regular shape. This by-product is formed after slag processing in electrometallurgical furnaces.

Its chemical composition is homogeneous and stable with about Fe 90% and P around 1.4%, S 0.8% and C 1.4%.

The max weight of each pieces is up to 1 ton.

The material can be loaded loose in 20 heavy duty container.

For further details feel free to contact us.
GOLD Member
VERIFIED
Jan-09-21

Cast Iron Slag

$230
MOQ: 150  Metric Tonnes
Supplier From Southampton, United Kingdom
 
This Cast Iron slag is a by-product derived from the production of thermal insulating products. The byproduct is a ferrous slag which can be utilised in an electric arc furnace to produce crude steel.

Physical Description
On visual inspection, it appears to be made up of irregular shapes. Dimension: 500mm -800mm

Chemical Composition
Its chemical composition is homogeneous and stable with Fe contents in the range of 90 +/- 5% and P contents < 0.6% S around 0.15% and C% around 3.5%.

Packing: Loose in container

Loading: in 20 Container

For further information, please feel free to contact us.

Verification Status