Rf Transceiver Cob Module

RF Advantages:
LoRa spread spectrum modulation technology, enabling long communication distance and very strong interference immunity
Ultra-small size, surface mount design, easy to embed Support multiple modulation modes to facilitate network use Support deep custom designs and other special applications Easy to produce, free of RF debugging
Support frequency hopping communication (LoRa mode)
Support specified node communication and broadcasting communication modes to facilitate customers to
Set up the wireless network Support self cycle reset function Support module firmware upgrading

Application:
AMR Auto Meter Reading, Network Communication, Remote Control, Mine Monitoring, Industrial Control, etc.

Parameter:
Frequency: 433/470/868/915MHz (¡¡¡ì¡¨¨ 20MHz Provide for setting)
Modulation Mode: LoRa/FSK
Output Power: 2~20dBm
Sensitivity: -139dBm (Max)
Data Rate: 1.2~115.2Kbps(Provide for setting)
Tx Current: 130mA (+20dBm)
Rx Current: 20mA
Standby Current: 2|¡¡ì¬A
Frequency Deviation: 10~50kHz
Receive Bandwidth: 42~166kHz
Interface: 8N1/8E1/8O1 TTL
UART(Scalable exteriorRS232\RS485)
Communication Distance: > 5000m@LoRa
Antenna Impedance: 50|¸
Operation Temperature: -20 to +70
Power Supply Mode: DC4.5~5.5V
Module Size: 47X26X10mm

Certifications:
FCC\ETSI\RoHS

Hope Microelectronics Company
Tel: +86-4001-189-180
Fax: +86-755-82973550
Website: http://www.hoperf.com

carton

Application:
Wireless Remote Control Switch, Smart Plug, Wireless Doorbell, Vehicle
Anti-Theft Device(RKE), Weather Station, etc.

RF Advantages
Parameters flexibly configurable and modifiable with software, simple and user-friendly operations
High measured sensitivity, narrowband applications, long communication distance
Easily passing safety Blocking Test, very good immunity
Integrated DutyCycle operating mode, reducing the average operating current, ultra-low power consumption
Different frequencies can be set with software without changing the crystal, reducing peripheral components

Parameter:
Frequency: 300~960MHz (Support software settings)
Modulation Mode: OOK/(G)FSK
Data Rate: 0.5~30Kbps/0.5~100Kbps(FSK)
Sensitivity: -114 dBm(1kbps 0.1%BER)
Measured Distance: Product: > 300m, Demo Board: > 1000m
Blocking Immunity: SR=1Kbps, ¡¡¡ì¡¨¨ 1/2/10MHz, Offset: 52/74/75db
Power Supply: 1.8~3.6V
Rx Current: 4.2mA@434MHz; 4.6mA@868MHz
Duty-Cycle Rx Mode: Support software settings,
Reduce average working current
Receiver Start-up Time: DutyCycle: On 12.3ms/off 7.3ms
Receiver Wake-up Time: < 1ms
Wake On Radio Function: Provide for setting of Preamble, Syncword and other conditional wake-up
Crystal: 26MHz+/-20PPM
Program Limes: One million times
Operation Temperature: -40~+85
Communication Mode: SPI-3Wire
Chip Package: QFN-16
IC Size: 3X3X0.75mm

Certifications:
RoHS\REACH\CE, etc.

Hope Microelectronics Company
Tel: +86-4001-189-180
Fax: +86-755-82973550
Website: http://www.hoperf.com

carton

Application:
Remote controller.

RF Advantages:
Cost-effective solution of SoC Single-Chip Remote Controller
Parameters flexibly configurable and modifiable with software, simple and user-friendly operations
Maximum power output of 13dBm, adjustable
Different frequencies can be set with software without changing the crystal, reducing peripheral components

Parameter:
Frequency: 240~480MHz(Support software settings)
Modulation Mode: OOK
Data Rate: 0.5~30Kbps
Output Power: -10~+13dBm(Support software settings)
Output Power programmable with steps: 1dBm
Second Harmonics: 315\434M@+13dBm: -60dBm/-52dBm
Third Harmonics: 315\434M@+13dBm: -65dBm/-60dBm
Power Supply: 1.8~3.6V
Operating Current: 18mA (+10dBm\50% duty cycle\9.6Kbps)
Sleep Current: 1|¨¬A
Crystal: 26MHz +/-20PPM
Crystal Load Capacitance: 12~20PF(Support software settings)
PLL Lock MODE: Dynamic lock
Program Limes: One million times
Operation Temperature: -40~+85
Communication Mode: Tx with MCU
Chip Package: SOP-14
IC Size: 8.65X1.6X1.75mm

Certifications:
RoHS\REACH\CE, etc.

Hope Microelectronics Company
Tel: +86-4001-189-180
Fax: +86-755-82973550
Website: http://www.hoperf.com

carton

Features:

Lead-free
Wavelength selectable to c-band itu-t grid wavelength
No reference clock required
Cold start up wavelength compliance
Dwdm-rated eml transmitter and pin receiver
Link length: 80km
With rohs directive-compliant

NETON SFP Transceiver Module with Single LC Receptacle
Transmitter center wavelength: 1310nm, 1550nm
Data rate: 155Mbps to 1.25Gbps
QC inspection: ISO, CE, CB, UL, ROHS, FDA, etc
Power supply: single 3.3V
Distance: SR, IR1, IR2, LR1, LR2
Operating temperature: 0C to 70C or -40C to 85C.

NETON optic products, 1x9 Transceiver Module, SFP+ Transceiver Module, SFP Transceiver Module, CWDM Transceiver Module, GBIC Transceiver Module, GPON Transceiver Module, 2x5 Transceiver Module, SFF Transceiver Module and so on, with the international authorized certificates ISO, CE, CB, UL, ROHS, FDA, etc, have been sold to more than 20 countries and regions and been widely used for Ethernet, Fiber Channel, ATM, SONET/SPH, Switches, Routers, Hubs, Digital Video Transmission and other optic networking applications.

Features of NETON SFP Bi-Di Transceiver Module with Single LC Receptacle:
1.Transmitter center wavelength: 1310nm, 1550nm
2.Data rate from 155Mbps to 1.25Gbps
3.Single 3.3V power supply
4.Single LC receptacle
5.Distance SR, IR1, IR2, LR1, LR2
6.Monitoring interface compatible with SFF-8472
7.Operating temperature 0C to +70C or -40C to +85C

Applications of NETON SFP Bi-Di Transceiver Module with Single LC Receptacle:
1.Ethernet
2.Fiber Channel
3.ATM
4.SONET OC-3/SDH STM-1
5.Switches
6.Routers
7.Other optic links.

10PCS Plastic Box, 10 Boxes Per CTN.

NETON SFP Bi-Di Transceiver Module with Single SC Receptacle
Transmitter center wavelength: 1310nm, 1550nm
Data rate: 155Mbps to 1.25Gbps
QC inspection: ISO, CE, CB, UL, ROHS, FDA, etc
Power supply: single 3.3V
Distance: SR, IR1, IR2, LR1, LR2
Operating temperature: 0C to 70C or -40C to 85C.

NETON optic products, 1x9 Transceiver Module, SFP+ Transceiver Module, SFP Transceiver Module, CWDM Transceiver Module, GBIC Transceiver Module, GPON Transceiver Module, 2x5 Transceiver Module, SFF Transceiver Module and so on, with the international authorized certificates ISO, CE, CB, UL, ROHS, FDA, etc, have been sold to more than 20 countries and regions and been widely used for Ethernet, Fiber Channel, ATM, SONET/SPH, Switches, Routers, Hubs, Digital Video Transmission and other optic networking applications.

Features of SFP Bi-Di Transceiver Module with Single SC Receptacle:
1.Transmitter center wavelength: 1310nm, 1550nm
2.Data rate from 155Mbps to 1.25Gbps
3.Single 3.3V power supply
4.Single SC receptacle
5.Distance SR, IR1, IR2, LR1, LR2
6.Monitoring interface compatible with SFF-8472
7.Operating temperature 0C to +70C or -40C to +85C.

Applications of SFP Bi-Di Transceiver Module with Single SC Receptacle:
1.Ethernet
2.Fiber Channel
3.ATM
4.SONET OC-3/SDH STM-1
5.Switches
6.Routers
7.Other optic links.

10PCS Plastic Box, 10 Boxes Per CTN.

Part number:W320240C,dimension: 160x109x11mm(5.7 inch),view area:122x92mm,IC: S1D13305 or EQV

Spec:
Frequency:868/433 MHz
Modulation: FSK Supported as well as ASK
Circuit Shape: PLL
Data Rate: 3K~ 1000Kbps
Channel Spacing: 180KHz
Sensitivity: 20 dB Sinad
Operating Temperature Range: -40 ~ +85 Centi degrees
Receiving Current: 5.7mA 5V; Sleep Mode Current: 50 nA
Digital RSSI Output
Stable; Easy to Use, Low External Parts Count
Compliant with FCC, IC, ETSI, RoHS

Dimensions: 3.2 x 1.4 x 0.5 (L x W x H) in cms
Weight: 5 gms