Application:
AMR Auto Meter Reading, Industrial Control System, Wireless Remote Control Equipment, Mining Safety Monitoring, Smart Home, Smart Security, Internet of Things and Other Wireless Devices, etc.
RF Advantages:
High output power, very good receiver sensitivity, long communication distance
Strong interference resistance to meet wireless certification standards
Meet the requirements of mainstream wireless applications, high cost-effective
No output power reduction at a supply voltage down to 1.8V
Parameter:
Frequency: 868/915MHz
Modulation Mode: FSK/GFSK/OOK
Output Power: 20dBm
Sensitivity: -123dBm (1.2kb/s in FSK)
Data Rate: 300Kbps (FSK mode)
Tx Current: 125mA (+20dBm)
Rx Current: 9.3mA
Standby Current: 0.1|¨¬A
Interface: SPI
Communication Distance: > 1000m(1.2kb/s)
Antenna Impedance: 50|¸
Operation Temperature: -40~+85
Power Supply Mode: DC1.8~3.7V, 1.8VTransmission power
Of power supply will not fall
Module Size: 16X16mm
Certifications:
FCC\ETSI\RoHS
Hope Microelectronics Company
Tel: +86-4001-189-180
Fax: +86-755-82973550
Website: http://www.hoperf.com
RF Advantages:
LoRa spread spectrum modulation technology, enabling long communication distance and very strong interference immunity
Ultra-small size, surface mount design, easy to embed Support multiple modulation modes to facilitate network use Support deep custom designs and other special applications Easy to produce, free of RF debugging
Support frequency hopping communication (LoRa mode)
Support specified node communication and broadcasting communication modes to facilitate customers to
Set up the wireless network Support self cycle reset function Support module firmware upgrading
Application:
AMR Auto Meter Reading, Network Communication, Remote Control, Mine Monitoring, Industrial Control, etc.
Parameter:
Frequency: 433/470/868/915MHz (¡¡¡ì¡¨¨ 20MHz Provide for setting)
Modulation Mode: LoRa/FSK
Output Power: 2~20dBm
Sensitivity: -139dBm (Max)
Data Rate: 1.2~115.2Kbps(Provide for setting)
Tx Current: 130mA (+20dBm)
Rx Current: 20mA
Standby Current: 2|¡¡ì¬A
Frequency Deviation: 10~50kHz
Receive Bandwidth: 42~166kHz
Interface: 8N1/8E1/8O1 TTL
UART(Scalable exteriorRS232\RS485)
Communication Distance: > 5000m@LoRa
Antenna Impedance: 50|¸
Operation Temperature: -20 to +70
Power Supply Mode: DC4.5~5.5V
Module Size: 47X26X10mm
Certifications:
FCC\ETSI\RoHS
Hope Microelectronics Company
Tel: +86-4001-189-180
Fax: +86-755-82973550
Website: http://www.hoperf.com
Application:
Wireless Remote Control Switch, Smart Plug, Wireless Doorbell, Vehicle
Anti-Theft Device(RKE), Weather Station, etc.
RF Advantages
Parameters flexibly configurable and modifiable with software, simple and user-friendly operations
High measured sensitivity, narrowband applications, long communication distance
Easily passing safety Blocking Test, very good immunity
Integrated DutyCycle operating mode, reducing the average operating current, ultra-low power consumption
Different frequencies can be set with software without changing the crystal, reducing peripheral components
Parameter:
Frequency: 300~960MHz (Support software settings)
Modulation Mode: OOK/(G)FSK
Data Rate: 0.5~30Kbps/0.5~100Kbps(FSK)
Sensitivity: -114 dBm(1kbps 0.1%BER)
Measured Distance: Product: > 300m, Demo Board: > 1000m
Blocking Immunity: SR=1Kbps, ¡¡¡ì¡¨¨ 1/2/10MHz, Offset: 52/74/75db
Power Supply: 1.8~3.6V
Rx Current: 4.2mA@434MHz; 4.6mA@868MHz
Duty-Cycle Rx Mode: Support software settings,
Reduce average working current
Receiver Start-up Time: DutyCycle: On 12.3ms/off 7.3ms
Receiver Wake-up Time: < 1ms
Wake On Radio Function: Provide for setting of Preamble, Syncword and other conditional wake-up
Crystal: 26MHz+/-20PPM
Program Limes: One million times
Operation Temperature: -40~+85
Communication Mode: SPI-3Wire
Chip Package: QFN-16
IC Size: 3X3X0.75mm
Certifications:
RoHS\REACH\CE, etc.
Hope Microelectronics Company
Tel: +86-4001-189-180
Fax: +86-755-82973550
Website: http://www.hoperf.com
RF Advantages:
Cost-effective solution of SoC Single-Chip Remote Controller
Parameters flexibly configurable and modifiable with software, simple and user-friendly operations
Maximum power output of 13dBm, adjustable
Different frequencies can be set with software without changing the crystal, reducing peripheral components
Parameter:
Frequency: 240~480MHz(Support software settings)
Modulation Mode: OOK
Data Rate: 0.5~30Kbps
Output Power: -10~+13dBm(Support software settings)
Output Power programmable with steps: 1dBm
Second Harmonics: 315\434M@+13dBm: -60dBm/-52dBm
Third Harmonics: 315\434M@+13dBm: -65dBm/-60dBm
Power Supply: 1.8~3.6V
Operating Current: 18mA (+10dBm\50% duty cycle\9.6Kbps)
Sleep Current: 1|¨¬A
Crystal: 26MHz +/-20PPM
Crystal Load Capacitance: 12~20PF(Support software settings)
PLL Lock MODE: Dynamic lock
Program Limes: One million times
Operation Temperature: -40~+85
Communication Mode: Tx with MCU
Chip Package: SOP-14
IC Size: 8.65X1.6X1.75mm
Certifications:
RoHS\REACH\CE, etc.
Hope Microelectronics Company
Tel: +86-4001-189-180
Fax: +86-755-82973550
Website: http://www.hoperf.com
Application:
Sports Watches, Fishing Barometer, 3D Navigation, Outdoor Waterproof Equipment, etc.
Sensor Advantages:
Waterproof resistant, O-ring seal
Industry's first, high precision (1m)
Ultra-low power consumption, extreme power saving
Ceramic substrate, high temperature resistance, higher stability
24 bits ADC with DSP, direct output of pressure, altitude and temperature values
Reflow soldering allowed, enabling efficient placement
Parameter:
Output Value: Pressure\Altitude\Temperature
Pressure Range: 300mbar~1200mbar
Pressure Accuracy: +/-1.0mbar
Programmable Interrupt: Support
Altitude Resolution: 10cm
Pressure Resolution: 0.01mbar
Temperature Resolution: 0.01
Temperature Range: -40~+85
Temperature Accuracy: +/-1.0
Output Interface: I2 C
Supply Voltage: 1.8~3.6V
Standby Current: < 0.1|¨¬A
Waterproof: O-ring seal
Size: 4.5X4.5X3.5mm
Ethanol alcohol distillation column
1. It is standard 95-96% alcohol equipment. Also it can distill pure water.
2.The distillation system has  three columns  and  continuous  distillation  process.The process is the  same as industrial(large scale) alcohol equipment.
 Mash distillation  column distills  fermented  mash or light alcohol  to 50% alcohol ethanol .
It has red copper bubble cap trays, standard design. It auto continuously feeds material liquid, auto continuously produces 50% alcohol ethanol and auto continuously discharges waste, Â ethanol discharge in waste 0.05%, better than international standard requirements.
The first rectification distillation  column  increases  alcohol degree  to 70-75% ,  separates  fusel oil and high boiling point  Impurities.  It auto discharges waste water,  ethanol discharge in waste 0.05%, better than international standard requirements.
The second rectification distillation  column  increases alcohol degree to 95%,  separates low boiling point  impurities  like acetaldehyde and methanol .
3.  The rectification system uses  industrial(large scale) standard process, but the whole set alcohol equipments are installed in one frame, like integration  module, even  you can run it by a button.
Distillation column For Ethanol Alcohol Plant
1. It is standard 95-96% alcohol equipment. Also it can distill pure water.
2. The distillation system has three columns and continuous distillation process.The process is the same as industrial(large scale) alcohol equipment.
    a. Mash distillation column distills fermented mash or light alcohol to 50% alcohol ethanol .
 It has red copper bubble cap trays, standard design. It auto continuously feeds material liquid, auto continuously produces 50% alcohol ethanol and auto continuously discharges waste, ethanol discharge in waste ?¤0.05%, better than international standard requirements.
    b. The first rectification distillation column increases alcohol degree to 70-75% , separates fusel oil and high boiling point Impurities. It auto discharges waste water, ethanol discharge in waste ?¤0.05%, better than international standard requirements.
    c. The second rectification distillation column increases alcohol degree to 95%, separates low boiling point impurities like acetaldehyde and methanol .
3.  The rectification system uses  industrial(large scale) standard process, but the whole set alcohol equipments are installed in one frame, like integration module, even you can run it by a button.
Content of Choline Chloride - 60% min
Loss on drying - 4.0 max
Particle size (20 mesh sieves) - 95% min
Heavy metal (Pb) - 0.002 max
TMA - 1000 ppm max
Description of Choline Chloride
Specification: Feed grade.
Contents:50%,60%,70%,75%,98%
Choline Chloride has the formula C5H14CINO.the carrier of the powder product is Corn cob or Silica.
Corn cob base Choline Chloride is yellow brownish dry powder and Silica base Choline Chloride is white dry powder.
Function and Usage:
Uses
[1] Choline Chloride is one kind of vitamins,it is the essential component of lecithin. And it is very important for the nutrition and growth of the animals.
[2] To prevent the accumulation of fat in livers and kidneys and avoid its pathological changes.
[3] To enhance the health of animals and to improve its ability to anti-illness.
[4]To increase the growth rate and laying rate to increase the survival rate Of baby pig.
[5]to increase the growth and survival rate of fishes promote its propagation
[6] to ensure the proper functioning of the nervous system of animals .
We don't just dry and mill purple corn kernels. In order to create a great product we extract the antioxidant and anthocyanin content directly from the cob, achieving a 30:1 ratio of concentration. Its high nutritional content is reflected in the deep purple color. Being neutral in flavour, it can be easily added for a nutritional boost to any food preparation or beverage.
we may offer 3mm/3.2mm/4mm/5mm/6mm tempered solar glass ,
glass mainly used for PV module ,solar collector ,greenhouse ,
solar transmission >91.5%
AR coating max solar transmission>99%
1.220v/110v , 50hz, ac power supply
2.Compatible with all em system
3.Stable and high sensitive demagnetizer
4.Notice:remove the power when changing the fuse
