NETON SFP Transceiver Module with Single LC Receptacle
Transmitter center wavelength: 1310nm, 1550nm
Data rate: 155Mbps to 1.25Gbps
QC inspection: ISO, CE, CB, UL, ROHS, FDA, etc
Power supply: single 3.3V
Distance: SR, IR1, IR2, LR1, LR2
Operating temperature: 0C to 70C or -40C to 85C.
NETON optic products, 1x9 Transceiver Module, SFP+ Transceiver Module, SFP Transceiver Module, CWDM Transceiver Module, GBIC Transceiver Module, GPON Transceiver Module, 2x5 Transceiver Module, SFF Transceiver Module and so on, with the international authorized certificates ISO, CE, CB, UL, ROHS, FDA, etc, have been sold to more than 20 countries and regions and been widely used for Ethernet, Fiber Channel, ATM, SONET/SPH, Switches, Routers, Hubs, Digital Video Transmission and other optic networking applications.
Features of NETON SFP Bi-Di Transceiver Module with Single LC Receptacle:
1.Transmitter center wavelength: 1310nm, 1550nm
2.Data rate from 155Mbps to 1.25Gbps
3.Single 3.3V power supply
4.Single LC receptacle
5.Distance SR, IR1, IR2, LR1, LR2
6.Monitoring interface compatible with SFF-8472
7.Operating temperature 0C to +70C or -40C to +85C
Applications of NETON SFP Bi-Di Transceiver Module with Single LC Receptacle:
1.Ethernet
2.Fiber Channel
3.ATM
4.SONET OC-3/SDH STM-1
5.Switches
6.Routers
7.Other optic links.
NETON SFP Bi-Di Transceiver Module with Single SC Receptacle
Transmitter center wavelength: 1310nm, 1550nm
Data rate: 155Mbps to 1.25Gbps
QC inspection: ISO, CE, CB, UL, ROHS, FDA, etc
Power supply: single 3.3V
Distance: SR, IR1, IR2, LR1, LR2
Operating temperature: 0C to 70C or -40C to 85C.
NETON optic products, 1x9 Transceiver Module, SFP+ Transceiver Module, SFP Transceiver Module, CWDM Transceiver Module, GBIC Transceiver Module, GPON Transceiver Module, 2x5 Transceiver Module, SFF Transceiver Module and so on, with the international authorized certificates ISO, CE, CB, UL, ROHS, FDA, etc, have been sold to more than 20 countries and regions and been widely used for Ethernet, Fiber Channel, ATM, SONET/SPH, Switches, Routers, Hubs, Digital Video Transmission and other optic networking applications.
Features of SFP Bi-Di Transceiver Module with Single SC Receptacle:
1.Transmitter center wavelength: 1310nm, 1550nm
2.Data rate from 155Mbps to 1.25Gbps
3.Single 3.3V power supply
4.Single SC receptacle
5.Distance SR, IR1, IR2, LR1, LR2
6.Monitoring interface compatible with SFF-8472
7.Operating temperature 0C to +70C or -40C to +85C.
Applications of SFP Bi-Di Transceiver Module with Single SC Receptacle:
1.Ethernet
2.Fiber Channel
3.ATM
4.SONET OC-3/SDH STM-1
5.Switches
6.Routers
7.Other optic links.
NETON SFP Transceiver Module
Transmitter center wavelength: 1310nm, 1550nm;
Data rate: 155Mbps to 2.5Gbps;
QC inspection: ISO, CE, CB, UL, ROHS, FDA, etc;
Power supply: single 3.3V;
Distance: SR, IR1, IR2, LR1, LR2;
Operating temperature: 0C to +70C or -40C to 85C.
NETON optic products, SFP+ Transceiver Module, SFP Transceiver Module, CWDM Transceiver Module, GBIC Transceiver Module, GPON Transceiver Module, 1x9 Transceiver Module, 2x5 Transceiver Module, SFF Transceiver Module and so on, with the international authorized certificates ISO, CE, CB, UL, ROHS, FDA, etc, have been sold to more than 20 countries and regions and been widely used for Ethernet, Fiber Channel, ATM, SONET/SPH, Switches, Routers, Hubs, Digital Video Transmission and other optic networking applications.
Features of NETON SFP Transceiver Module:
1. Dual fiber SFP transceiver;
2. Transmitter center wavelength: 1310nm, 1550nm;
3. Data rate from 155Mbps to 2.5Gbps;
4. Single 3.3V power supply;
5. Distance SR, IR1, IR2, LR1, LR2;
6. Monitoring interface compatible with SFF-8472;
7. Operating temperature 0C to +70C or -40C to 85C
Applications of NETON SFP Transceiver Module:
1. Fast Ethernet;
2. Fiber Channel;
3. ATM;
4. SONET OC-3/SDH STM-1
5. Other optic links.
Lead-free
Wavelength selectable to c-band itu-t grid wavelength
No reference clock required
Cold start up wavelength compliance
Dwdm-rated eml transmitter and pin receiver
Link length: 80km
With rohs directive-compliant
RF Advantages:
LoRa spread spectrum modulation technology, enabling long communication distance and very strong interference immunity
Ultra-small size, surface mount design, easy to embed Support multiple modulation modes to facilitate network use Support deep custom designs and other special applications Easy to produce, free of RF debugging
Support frequency hopping communication (LoRa mode)
Support specified node communication and broadcasting communication modes to facilitate customers to
Set up the wireless network Support self cycle reset function Support module firmware upgrading
Application:
AMR Auto Meter Reading, Network Communication, Remote Control, Mine Monitoring, Industrial Control, etc.
Parameter:
Frequency: 433/470/868/915MHz (¡¡¡ì¡¨¨ 20MHz Provide for setting)
Modulation Mode: LoRa/FSK
Output Power: 2~20dBm
Sensitivity: -139dBm (Max)
Data Rate: 1.2~115.2Kbps(Provide for setting)
Tx Current: 130mA (+20dBm)
Rx Current: 20mA
Standby Current: 2|¡¡ì¬A
Frequency Deviation: 10~50kHz
Receive Bandwidth: 42~166kHz
Interface: 8N1/8E1/8O1 TTL
UART(Scalable exteriorRS232\RS485)
Communication Distance: > 5000m@LoRa
Antenna Impedance: 50|¸
Operation Temperature: -20 to +70
Power Supply Mode: DC4.5~5.5V
Module Size: 47X26X10mm
Certifications:
FCC\ETSI\RoHS
Hope Microelectronics Company
Tel: +86-4001-189-180
Fax: +86-755-82973550
Website: http://www.hoperf.com
Application:
AMR Auto Meter Reading, Industrial Control System, Wireless Remote Control Equipment, Mining Safety Monitoring, Smart Home, Smart Security, Internet of Things and Other Wireless Devices, etc.
RF Advantages:
High output power, very good receiver sensitivity, long communication distance
Strong interference resistance to meet wireless certification standards
Meet the requirements of mainstream wireless applications, high cost-effective
No output power reduction at a supply voltage down to 1.8V
Parameter:
Frequency: 868/915MHz
Modulation Mode: FSK/GFSK/OOK
Output Power: 20dBm
Sensitivity: -123dBm (1.2kb/s in FSK)
Data Rate: 300Kbps (FSK mode)
Tx Current: 125mA (+20dBm)
Rx Current: 9.3mA
Standby Current: 0.1|¨¬A
Interface: SPI
Communication Distance: > 1000m(1.2kb/s)
Antenna Impedance: 50|¸
Operation Temperature: -40~+85
Power Supply Mode: DC1.8~3.7V, 1.8VTransmission power
Of power supply will not fall
Module Size: 16X16mm
Certifications:
FCC\ETSI\RoHS
Hope Microelectronics Company
Tel: +86-4001-189-180
Fax: +86-755-82973550
Website: http://www.hoperf.com
Hot-pluggable, duplex lc connector
Single +3.3v power supply
Lvpecl data interface
850/1310/1550nm vcsel/fp/dfb, sm/mm fiber optional
Eye safety, designed to meet laser class1
Compliant with telcordia (bellcore) gr-468-core
Transmitter center wavelength:850nm, 1310nm
Single +3.3v or +5v power supply
Lvpecl / pecl data interface, dc coupling
1x9 package
Compliant with telcordia (bellcore) gr-468-core
Eye safety, meet laser class 1, compliant with iec60825-1
Isolation >30db, cross talk <-45db
Operating temperature: -40f¦ to +85f¦
sfp+ 6g optical transceiver
brand new and 100%genuine
advantage price
100% real shooting
1 year warranty
rohs compliant
Features
data-rate of 6.144 gbps
compliant with sfp msa and sff-8472 with duplex lc receptacle
digital diagnostic monitoring: internal calibration or external calibration
compatible with rohs
+3.3v single power supply
Applications
cpri and obsai
bbu to rru interface
other optical transmission systems
Part no. Package Wavelength Data rate Reach Output power(dbm) Sens(dbm) Connector Voltage
Hpp316g-02d Sfp+ 1310nm 6.144g 2km -8¡¨¹pout¡¨¹-1 ¡¨¹-14 Lc 3.3v
Hpp316g-l2d Sfp+ 1310nm 6.144g 20km -4¡¨¹pout¡¨¹1 ¡¨¹-14 Lc 3.3v
Lead time
For some parts, we have the stock and ship immediately.For the parts which need to produce, it will take 1-2 weeks to get the shippment ready. And if need to make by the required specification, it will take longer.This will be decided by the kind of the products.
