Radiation Frost Detectors (Sf-110)

THF is an important organic synthetic raw material and a solvent with excellent performance. It is especially suitable for dissolving PVC, polyvinylidene chloride and butyl aniline. It is widely used as a solvent for surface coatings, anticorrosive coatings, printing inks, tape and film coatings, and used in combination. As a reaction solvent, the thickness and brightness of the aluminum layer can be arbitrarily controlled when used in the aluminum electroplating solution. THF itself can be polycondensed (ring-opening and repolymerization initiated by cations) into polytetramethylene ether glycol (PTMEG), also known as tetrahydrofuran homopolyether. PTMEG and toluene diisocyanate (TDI) are made into special rubbers with abrasion resistance, oil resistance, good low temperature performance and high strength; with dimethyl terephthalate and 1,4-butanediol to make block polyether polyester elastic Material.

Potassium Sulfate fertilizer for Nutrigationâ?¢ of all crops. It combines potassium and sulfur, two nutrients essential for plant growth. Haifa SOP is a recommended source of potassium where soil pH needs to be lowered, when sulfur is required, or when N application rates should be limited (e.g. at the end of the season).

Providing concentrated nutrition, readily available for plant uptake. It enhances the plant's resistance to drought, frost, insects, and diseases, thus improving yield and quality. Haifa SOP helps gaining higher nutritional value of crops, better taste and appearance, and improved suitability for transport and storage. Haifa SOP is a crystalline product, fast-dissolving, highly soluble and virtually free of chloride.


Please note that 25kg bags are also available, you can email us for a quotation

SPECIFICATION: UREA 46% NITROGEN GRANULAR
UREA CARBAMIDE, CARBONLYDIAMIDE, AGRICULTURAL GRADE, GRANULAR, STANDARD
according to GOST 2081-92, MARK B
a. PACKING: in bulk or bags / 50 KG
b. SPECIFICATION:
SPECIFICATION UREA46% GRANULAR GOST 2081-92
Product UREA N46 agriculture grade
Nitrogen 46% minimum
Moisture 0.5 max
Free ammonia 160 PXT PPM maximum
BIURET 1.0% maximum
Harmful substances 100 % free from harmful substances
Melting point 132 degree Celsius
Granulation 1mm to 4mm 90% minimum
Color White standard or white pure
Odor Odorless
Boiling Decomposes before boiling
Radiation Non-radioactive
Physical state Solid@20�°C, 101 KPA white granules
Specific gravity Solid@20�° C-1.35 t/ms
Floatability in water Sinks and mixes
Molecular weight 60.065
Fertilizer granular 94-96%min
Prill 96% max
Fisher 0.30%

Salisbury's Self-Testing Voltage Detectors allow testing to be continuous and automatic. An intermittent flash and beep confirms the detector is functioning properly. Self-Testing Voltage Detectors are used to verify live or de-energized conductors. These testers may be used with rubber insulating gloves or hot sticks using the splined universal end fitting. Testers indicate the presence of voltage with an extra bright LED light and a distinctive audible signal. It is recommended that the tester be moved closer to the conductor until a warning is indicated, or it touches the conductor, apparatus, or elbow test point. Each tester requires three C batteries (included).

Features & Benefits: Do not assume conductors that have been tested de-energized will stay de-energized. Always install proper grounding devices before working. Failure to do so may result in serious injury or death. Dimensions in. (mm): 11 x 3.5 ( 279.4 x 89 )

Product Name: Isopropyl myristate
Synonyms: Isopropyl Myristate, 96% 25GR; IPM 100; IPM-EX; IPM-R; Radia 7730 (IPM); Isopropyl myristate Vetec(TM) reagent grade, 98%; MYRISTIC ACID ISOPROPYL ESTER MINIMU; ISO-PROPYL N-TETRADECANOATE
CAS: 110-27-0
MF: C17H34O2
MW: 270.45
EINECS: 203-751-4
Melting point ~3 �°C (lit.)
Boiling point 193 �°C/20 mmHg (lit.)
density 0.85 g/mL at 25 �°C (lit.)
vapor pressure <1 hPa (20 �°C)
FEMA 3556 | ISOPROPYL MYRISTATE
refractive index n20/D 1.434(lit.)
Fp >230 �°F
storage temp. 2-8�°C
solubility <0.05mg/l
form Liquid
Specific Gravity 0.855 (20/4�ºC)
color Clear
Odor odorless


Application

Isopropyl myristate (IPM) is a fatty acid ester which is used as solvent in water-in-oil emulsion, oils and fatty based ointments. The use of IPM is recommended in the Sterility Test chapter of the European, Japanese and United States Pharmacopoeia (EP, 2.6.13, JP, 4.06 and USP, 71) as diluent for oils and oily solutions, as well as for ointments and creams. Indeed, its solvent properties improve the filterability of these samples.
Isopropyl myristate is known as a penetration enhancer for topical preparations. It is a water clear, low viscous oily liquid with a very good spreading capacity on the skin. Isopropyl Myristate is mainly used in cosmetics as an oil component for emulsions, bath oils and as a solvent for active substances.

Acid Black 1 Acid Red 119 Acid Orange 74
Acid Black 11 Acid Red 131 Acid Orange 80
Acid Black 24 Acid Red 151 Acid Orange 142
Acid Black 26 Acid Brown 14 Acid Violet 17
Acid Black 52 Acid Brown 75 Acid Violet 49
Acid Black 173 Acid Brown 79 Acid Violet 54
Acid Black 174 Acid Brown 106 Acid Blue 7
Acid Black 194 Acid Brown 158 Acid Blue 9
Acid Black 210 Acid Brown 214 Acid Blue 15
Acid Black 234 Acid Brown 348 Acid Blue 92
Acid Red 14 Acid Brown 349 Acid Blue 113
Acid Red 17 Acid Brown 355 Acid Blue Br
Acid Red 18 Acid Yellow 11 Acid Blue N
Acid Red 33 Acid Yellow 17 Acid Blue V
Acid Red 44 Acid Yellow 23 Acid Green 1
Acid Red 52 Acid Yellow 42 Acid Green 3
Acid Red 54 Acid Yellow 73(Uranine) Acid Green 9
Acid Red 73 Acid Yellow 99 Acid Green 16
Acid Red 87(Eosine Sodium) Acid Yellow 110 Acid Green 17
Acid Red 88 Acid Yellow 194 Acid Green 20
Acid Red 89 Acid Orange 3 Acid Green 25
Acid Red 97 Acid Orange 7(Acid Orange Ii) Acid Green 111
Acid Red 99 Acid Orange 10
Acid Red 114 Acid Orange 56

R/o Salt Free Dyes For Ink Application
Acid Red 52 Acid Blue 15 Acid Violet 17
Acid Red 87 Acid Blue 25 Acid Black 1
Acid Blue 9 Acid Yellow 151

PHYSICAL PROPERTIES
Properties BC-SR Conc BC-VX Conc BC-PL Series BC-HTR Series
Specific Gravity 1.38 1.35 1.38 1.2
Average Particle Size,Microns 4 - 6 3 - 4 15 5 - 6
Softening Point Deg.C 155 - 165 130 - 140 90 - 110 125 - 135
Decomposition Point Deg.C > 200 > 200 > 290 > 300
Heat Stability Deg.C - - 240 270 - 290
Solvent Resistance Very Good Poor -
APPLICATIONS
Paper Coating Water Base R R
Solvent Base R
Textile Printing R R
Dyeing R
Paints/Inks Water Base R M
Solvent Base R
Plastics M R R
PVC Plastisols R M
Wax
Candles &
R M
Modeling Wax
Clay Colouring R R
Miscellaneous Art & Craft R R
Banners R R
R = Recommended M = May Be Used (After Trial)
BC-SR Conc. Series : Thermosetting type of high strength pigments with fine particle size,used for Solvent/Water
Based Paints,Inks,Papercoating,Textile,Plastisols,Crayons,Plastics etc. Applications.
Yellow(Y),Golden Yellow(R),Orange(Y),Orange(R),Red Orange,R.Red,Pink(B), Pink(M),Pink(S),Magenta(S),
Magenta(R), Magenta(B),Violet(B),Violet(R),Royal Blue,Peacock Blue
BC-VX Conc.Series : Brillaint,high strength series with very fine particle size used for Textile-Printing, Oil/Water
Based Paints/Papercoating etc. applications.
Shades : Saturn Yellow,Brilliant Yellow,Z.Yellow,Bright Yellow,Geneva Green,Glow Green, Glow Green(S),Deep
Green,Jet Green,Golden Yellow(Y),Golden Yellow(R),Orange(Y),Orange(R), Orange(S),Red Orange,R.Red,
Rich Orange(Y), Rich Orange(R),Arch Chrome,Pink(B),Pink(M),Pink(S),Magenta(S),Magenta(R), Magenta(B),
Violet(B),Violet(R),Royal Blue, Peacock Blue
BC-PL Series : Thermoplastic polyester based,formaldehyde free,high strength colours,with good heat resistance
which melt blend in plastics.These are Fluorescent Pigments specially made for Plastics Application
(Execpt PVC calendering).
Shades :Brilliant Yellow,Lemon Yellow,Green,Glow Green,Brill Green,Deep Green,Golden Yellow(Y), Golden
Yellow(R), Orange(R),Orange(3R),Orange(4R),Orange(Y),Red Orange,Fire Orange,Red,Pink(B),Pink(2B),Pink(3B),
Pink(4B), Pink(2R), Pink(R),Magenta(R),Magenta(S),Magenta(B),Blue,Royal Blue,Violet
BC-HTR Series : Thermoplastic polyamide based,formaldehyde free,premium high strength colours,
with excellent heat resistance,brillance & low mould plateout which meltblend in Plastics.
Shades : Lemon Yellow,Green,Golden Yellow,Orange(Y),Orange(R),Red Orange,Red,Pink(R), Pink(B),Magenta

The aqueous solution of hydrogen fluoride gas is a clear, colorless, fuming corrosive liquid with a strong pungent odor, easily soluble in water and ethanol, and slightly soluble in ether. Hydrofluoric acid is a weak acid with strong corrosiveness, which can strongly corrode metal, glass and silicon-containing objects.
It is generally produced in laboratories with fluorite (mainly composed of calcium fluoride) and concentrated sulfuric acid. It needs sealed in a plastic bottle.

The chemical industry is used to produce organic and inorganic fluorides (such as potassium fluoride, magnesium fluoride, uranium hexafluoride, calcium fluoride helium, fluororesin, fluoroplastic, fluororubber), dye synthesis, organic synthesis catalyst, and flame-retardant agent etc.
In glass processing and production, it is used for frosted bulbs and general bulb treatment, glassware polishing, glass instrument scales, glassware and mirror engraving and lettering.
As a cleaning agent for pickling of metal surfaces such as stainless steel.
Used in the atomic energy industry, for the production of elemental fluorine and fluorides, and also as catalysts and fluorinating agents.