ALUMINIUM LAMINATED FILM ROLLS, PRINTED STOCK LOT.
Post industrial. Clean.
Pack: in big bags.
Can load in 1x40HC container aprox. 26 - 28 MT net.
Ready for shipment. Photos available upon request.
If you are interested kindly contact us for more information.
You are welcome to visit our company premises and supervise our materials.
Certificate ISO: 9001, ISO: 14001, OHSAS 45001, AQSIQ and CCIC
The gearbox of a wind turbine is one of the key components in wind power generation equipment, used to transfer the kinetic energy of the rotating wind turbine to the generator, thereby generating electrical energy. It is usually composed of multiple gears, which increase the speed of the wind turbine through precise transmission ratios and convert it into a speed suitable for the operation of the generator. Usually, the speed of the wind turbine is very low and far from the required speed for the generator to generate electricity. It must be achieved through the speed increasing effect of the gearbox gear pair, so the gearbox is also called a speed increasing gearbox.
JH series gear reducers for cement kilnsare involute cylindrical gear units with parallel shafts which has four reduction stages.This series has four basic structure including over 50 types.Thanks to the standardized,series and modulated design,the reducers can be manufactured according to standard or specific requirements at customers'choice with good reliabiity and maintenance.
The latest XB series gear reducers for roller presses includes totaly 33 models with transmission powerup to 4,000kW and a torque transmission capacity up to 5300KN.m.
According to different cement production lines with transmission power up to 8400kW and ratio from 35:1 to 80:1,we can match JS JST,JD(X)and MDH series central driving mil reducers to meet needs for various cement lines of daily output 2500-10,000 tons.
The variable pitch gear box is an important part of the fan variable pitch system, its main function is to increase the torque of the variable pitch motor on the variable pitch bearing, drive the blade to change the blade pitch Angle at different wind speeds, so that the blade is in the best state of absorbing wind energy, and can drive the blade feathering brake when the wind speed exceeds the cutting wind speed, so as to ensure the machine to run efficiently and smoothly.
The variable gear box transmission mechanism is composed of multiple planetary gear trains, usually 3 stages, and the planetary transmission form is NGW type.
We are glad to propose 500 MT of stain less steel mill scale.
Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products.
At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel.
The recovery ratio after melting in furnace for the most valuable alloy elements is:
- Ni: 3.5 - 4.5%
- Cr: 6-8%
From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows:
Waste code: 10 02 10
The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers.
Chemical analysis of the material is available on request.
