GORVIA Spray PU foam is a one component polyurethane foam used to seal gaps and crevices. The foam that dispenses from the aerosol can is moisture cured and draws humidity from the air for cure. PU foam is widely used in sealing around doors, windows, pipes, indoor fittings or any other application in construction. Provides an excellent bond to lumber, plywood, concrete, metals, masonry and other substrates.
Akfix 805 is a single-component, moisture-curing and self-expanding aerosol polyurethane foam. It is designed for easy dispensing through the straw adapter included with each can. It does not contain any propellant gases that are harmful to the ozone layer.
Excellent adhesion & filling capacity and high thermal & acoustical insulation value.
Excellent mounting capacity and stability.
Adheres to almost all building materials with the exception of surfaces such as polyethylene, Teflon, silicone and surfaces contaminated with oils and greases, mold release agents and similar materials.
Mould-proof, water-proof, over paintable.
Cured foam dries rigid and can be trimmed, shaped and sanded.
Premium quality Polyurethane Foam. It has excellent bonding strength, that adheres to the wide range of surfaces. Building insulation that can fill and enclose spares between roof tiles, concrete slabs, wall cavities, drilled holes, frame construction, gaps around windows and other substrates. It is a single component material; has moisture resistance and self-expanding properties.
Thermcoat Thermal & Acoustic Insulation Pu Spray Foam (Gun Use)
A PU Foam for top quality heat and sound insulation at buildings and houses. Provides a unique, monolithic thermal insulation application without junctures, seams and gaps. An innovative alternative to traditional building insulation methods such as polystyrene heat insulation boards, glass wool and rock wool. Single-component product used with an applicator gun. It does not contain any propellant gases which are harmful to the ozone layer.
Excellent adhesion to all kind of building materials,
Can be applied easily to uneven, hard to reach surfaces where it is not possible to use traditional insulation materials,
Excellent thermal insulation value (0.025 W/(m.K),
Elimination of thermal bridges,
Elimination of the dew point,
Yield up to 3meter with 1.5cm thickness for one layer if applied from a distance of ~40cm with normal application speed,
No need to use mechanical fastening elements after use,
Over paintable,
High PU Foam Adhesive is a one-component, ready to use multi-purpose Polyurethane Foam. It is fitted with head for use with a foam application gun. The foam will expand and cure by moisture in the air. It is used for a wide range of building applications. It is very good for filling and sealing with excellent mouthing capacities, high thermal and acoustical insulation. High adhesive rate than normal PU Foam.
PRODUCT FEATURES
1.Strong initial viscosity and adhesive force. 2.Easy to use, high efficiency of construction. 3.Low cost of construction, easy operation.
4.Application temperature is between - 5 to +40. 5.Temperature resistance is between -30 to +80. 6.It is CFC-free and HCFC-free.
APPLICATIONS AREAS
1.Be suitable for bonding of insulation board of exterior wall. 2.Be suitable for rapid bricklaying of decorated wall.
3.Bonding of interior decorative articles. 4.Bonding of wood boards or gypsum boards.
5.Waterproof .insulation and sealing to wall, roof and shield.
