We are able to supply Tin in many forms including LME registered and
non registered, ingots, slabs, bars, foil, granules, powder, anodized
activated powder, shot, wire, sticks, ingots, and “mossy tin”.
Tin is a silvery-white metal, is malleable, somewhat ductile, and has a highly crystalline
structure. The element has two colours, with a cubic structure which changes at
allotropic forms. On warming it is grey, the ordinary form of the metal. When Tin is
cooled below 13.2°C, it changes slowly from white to grey or tetragonal structure. This
change is affected by impurities such as Aluminium and Zinc, and can be prevented
by small additions of Antimony or Bismuth.
Product quality
Tin is a silvery white and soft metal. It is soft and has good ductility. Its hardness is relatively low. You can cut it with a knife. At the temperature of 100 â??, it can develop into very thin tin foil, and the thickness can be less than 0.04 mm.
Pure tin can be used as coating materials, and has a very wide range of applications in food, machinery, electrical appliances, automobiles, aerospace and other industrial sectors.
Each ingot weighs 25kg+ 1kg; Bundled, each bundle weighs about 1050 kg
The impurity composition of our tin ingots:
Spruce timber - commonly also known under its latin name "Picea Abies" is widely distributed throughout continental Europe and is a timber tree of major economic importance. The large tree usually has a straight, cylindrical trunk and growns to a height of about 30 m (up to 55 m), with a large diameter of about 60 cm (up to 1,5m).
Big sizes - beams:
Thickness - from 100 up to 300 mm
Width - from 100 up to 300 mm
Length - 3000/4000/5000 mm
Small size - beams:
Thickness - from 40 up to 95 mm
Width - from 60 up to 95 mm
Length - 3000/4000/5000 mm
Boards:
Thickness - from 18 up to 50 mm
Width - from 50 up to 250 mm
Length - 3000/4000/5000 mm
Pine timber - also referred to redwood timber, commonly also known under its latin name "Pinus Sylvetris" is the most widely spread in the East European Countries. The tree is generally 30m high with a diameter of about 1m but larger trees may be found on favorable sites.
Big sizes - beams
Thickness - from 100 mm up to 300 mm
Width - from 100 mm up to 300 mm
Length - from 3000 mm up to 5400 mm
Small sizes - beams
Thickness - from 40 mm up to 95 mm
Width - from 60 mm up to 95 mm
Length - from 3000 mm up to 5400 mm
Boards
Big sizes - beams
Thickness - from 20 mm up to 50 mm
Width - from 50 mm up to 200 mm
Length - from 3000 mm up to 5400 mm
Beech timber - commonly also known under its Latin name "Fagus sylvatica" is the one most widely spread in the Romanian Carpathian Mountains, belonging thus to the only unpolluted forest area in Europe.
TASS - SUPER SHORT
Thickness - 25/32/38/50 mm
Width - from 80 mm and wider
Length - from 300 mm till 900 mm
TAS - SHORT
Thickness - 25/32/38/50 mm
Width - from 100 mm and wider
Length - from 1000 mm till 2000 mm
TAL - LONG
Thickness - 25/32/38/50 mm
Width - from 120 mm and wider
Length - from 2100 mm and longer
Export of wood SARL We are looking for serious buyers only. Hard and soft wood.
These are samples. Contact for more
Eucalyptus 20000m3
Pine 10000m3
Beech 5000m3
Spruce 5000m3
Teak 10000m3
Ayous 7000m3
Ash 10000m3
Poplar 10000m3
oak 3000m3
We supply round and sawn logs, sawn timber
We are global suppliers of quality Teakwood Logs, squares and lumbers.
Teak wood is one of the highest quality available hardwoods today. Its natural properties make it resistant to weather variations. Exposure to sun and rain do not damage teak as they would damage other types of wood.
Our teak wood, especially, comes from legal origin and high quality forest management.
Logs
They come from thinning and final cuts, sold with different specifications for the sawmills of the region and exported to the whole world.
Logs can be used in the creation of rustic outdoor and indoor furniture, pillars, veneer and even masts of ships. After to be processed in a sawmill into planks and lumber can be applied for all kind of teak uses. After all, thanks to its high resistance to moisture, teak is widely used in shipbuilding.
Lumber
Sawn lumber is produced on its own sawmill, which allows us to offer saws cuts of different specifications, according to the customerâ??s needs. It is ideal for the manufacture of furniture, floorings, decks, wooden artifacts and decorative items in general.
Squares
The squares are produced in the sawmills with an internationally recognized liability standard.
It is possible to find squares of teak being used in construction for doors, windows frames, in the composition of decks, floorings and fancy furniture. The high durability of teak wood provides an excellent cost-benefit to the final consumer.
We equally have the following species of wood available...
IROKO,SAPELLI,OKAN,AZOBE ,IROKO , TALI,FARO,MOVINGUI,BOSSE,AIELE,ZINGANA,EBENE,AYOUS,TEAK,WENGUE,KOSSIPO
