Supplier : Hot dip galvanizing
steel structure for solar power plants,
power transmission lines and gsm poles,
polygonal lighting poles,
projector poles,
tubular poles,
flag poles,
signposts and slab posts,
advertising board poles,
highway railings and barriers,
steel structures, steel scaffolding,
machine parts manufacturing,
bridge and pedestrian railings,
steel construction products,
Established: 2004
Standards: EN ISO 1461, ISO9001, ISO14001, OHSAS 18001, TSE914
Verification Status
Contact Details:
Tursam Ulam Ve Enerji Sistemleri Imalat Ihr. Taah. San. Ve Tic. A.
Sakarya 2. Org.san.blg. 965 Ada, 2 Parsel
Hendek Vd
54300
Sakarya
Turkey
The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans.
At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.
The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.
The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.
The collected stock, is stored in open air, on cemented flooring.
Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace.
Please feel free to contact us for further details
Steel products refer to solid straight steel products with a certain section shape and size, including wire, profile and plate, which are formed by plastic processing except pipes. It can be divided into hot rolling, cold bending, cold rolling, cold drawing, extrusion, forging, hot bending, welding and special rolling according to the production method. It can be divided into railway, shipbuilding, mining, structure and construction according to its use. According to the material can be divided into carbon steel, alloy steel and stainless steel. At the same time, these steel products can be reprocessed to form semi-finished products or finished products to meet special requirements. We can according to the customer's different needs, according to the drawings or samples for reprocessing production.
Hollow Section steel Tube is the general name for the steel pipe other than thecircular steel pipe. Such as square, rectangle, oval,elliptical, cone, trapezoidal, spiral, etc. Different steel pipe can more adapt to the particularity of use conditions, save metal and improve the labor productivity of parts manufacturing. It is widely used in aviation, automobile, shipbuilding, mining machinery, agricultural machinery, construction, light textile and boiler manufacturing. The methods of producing different pipes are cold pulling, electric welding, extrusion and hot rolling, etc. Compared with the round tube, the different tubes generally have a larger moment of inertia and cross section modulus, and have a large bending resistance and torsion resistance, which can greatly reduce the structural weight and save steel.
We can supply met coal (hi and med vol) as requested, need to start with 30,000 tons per
month and can work up to 110,000 tons per month; specs as outlined below:
Tonnage-25-30k tons per month
Spec: Dry-Basis
Ash-8-9.5
Sulfur-1-1.1
BTU-13,000-14,000
Vol- 26 to 32(M-H)
FSI- 9
Tonnage-1st Month-25-30k
2ndMonth-35-40k & 40k per month for the remainder of contract.
Spec: Dry-Basis
Ash-7.5-8.5
Sulfur-0.5%
BTU-13,500-14000
Vol-32-35(H)
FSI-7-8.5
Three year contract, fixed price for first two years; adjusted to market in 3rd year, or as negotiated. This is good coal and with a two year fixed price contract it should be very attractive. Buyer can inspect coal on site and contract directly with producer if required.
Producer has 20+ years in business and sells to some of the largest US power and steel companies.
We are supplier of Steel Channels. Steel U channel, the size can be provided according to customer's requirement.
1)size: 51x25x3mm-305x80x13mm 2)material: q195, q215, q235, a36, ss400, ss540 3)packing:bundle with strips.
