We put forward a high quality of assortment of Nickel which is available
in many forms including LME registered and non registered cathodes,
cut cathodes, briquettes, pellets, disks, shots, granules, foil, powder,
flakes, sheet, wire, mesh, spheres, “evaporation slugs”, and rods.
Nickel is a silvery white metal that takes on a high polish. It is hard, malleable, ductile,
somewhat ferromagnetic, and a fair conductor of heat and electricity
We are proposing about 2000tons of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag
- European Code: 19.12.01
- Basel Code: B1010
- HS Code: 2619.0020
- Quantity: 2000 tons currently available
- Monthly quantity: 500-1000 tons depending on production
- Size: 350 1200 mm
- Fe content: from 77 to 86%
- C content: above 2,5-3%
- Bulk density: 2,8-3,4 tons/m3
- Loading type: loose in 20 (26-27 tons on average)
The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact us
This Cast Iron slag is a by-product derived from the production of thermal insulating products. The byproduct is a ferrous slag which can be utilised in an electric arc furnace to produce crude steel.
Physical Description
On visual inspection, it appears to be made up of irregular shapes. Dimension: 500mm -800mm
Chemical Composition
Its chemical composition is homogeneous and stable with Fe contents in the range of 90 +/- 5% and P contents < 0.6% S around 0.15% and C% around 3.5%.
Packing: Loose in container
Loading: in 20 Container
For further information, please feel free to contact us.
Desulphurisation Slag is an iron slag derived from the desulphurisation skimming process. This material is an iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si), but has a stable chemistry with 75 -80% chemistry.
The level of Fe% in the slag has been estimated by water displacement test.
This material con offer competitive advantages respect other metal scraps:
Price;
Stable Chemistry;
The material can be loaded loose in 20 heavy duty container.
We are proposing about 1000 1200 Mt/ton monthly of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag
:
1. >85% Fe Average 600mm Max Fraction
2. >78% Fe Average 20-300mm Fraction
The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact
PHYSICAL APPEARANCE ASPECT
Agglomerate materials COLOR Gray blackish color
CHEMICAL BEHAVIOR
The basicity of the slag is normally fixed by the amount of lime and calcinated dolomite added, the silicon and aluminum levels of the hot metal and steel scrap charged as well as ferro-alloys.
Below present our general procedures for the purchase and sale of sugar of Brazilian origin:
1- Buyer issues a Letter of Intention (LOI) addressed to Seller;
2- Seller issues a Soft Corporate Offer (SCO);
3- If Buyer accepts SCO, signs and seals SCO and then sends to Seller;
4- Seller issues Full Corporate Offer (FCO);
5- Buyer signs and seals FCO and issues an Irrevocable Corporate Purchase Order (ICPO), addressed to Seller;
6- Seller issues draft of Sale and Purchase Agreement (SPA) to be discussed and commented;
7- SPA is signed by Seller and Buyer;
8- Buyer issues draft of the Payment Instrument (SBLC/DLC) for approval by Seller�´s Bank;
9- If Seller�´s Bank accepts, Buyer issues the bank guarantee (SBLC/DLC);
10- Seller issues Performance Bond (PB) 2%;
11- Seller prepares the product and export documents;
12- Buyer receives the export documents by mail;
13- Buyer makes payment 100% to Seller�´s Bank through transfer bank (Swift Message MT-103);
14- Shipping;
15- Seller sends the original export documents to Buyer;
NOTES:
The financial instrument (SBLC / DLC) must be issued by the Top 50 Bank in the world ranking.
Copper slag is a low cost expendable abrasive suited for open blast cleaning and due to its low silica content it does not pose the health hazards created by silica sand. Its sharp, hard particles can provide a fast cleaning action and an excellent surface profile. It is available in various sizes
Copper slag is abrasive blasting grit made of granulated slag from metal smelting processes (also called iron silicate). Copper slag abrasive is suitable for blast cleaning of steel and stone/concrete surfaces, removal of mill scale, rust, old paint, dirt etc. Suitable for SA-3, SA-2 and SA-2. Copper slag blasting media/grit is manufactured of the granulated slag of copper refineries, and used for blast-cleaning of metal surface. In different industries it is called different names abrasive powder, grit, copper slag grit, mineral grit, grinding grains, etc.
Application Nickel plating is used in various alloys such as new silver, Chinese silver, German silver; for coins, electronic boards, storage batteries; magnets, lightning rod tips, electrical contacts and electrodes, spark plugs, mechanical parts; catalysts for the hydrogenation of oils and other organic substances. See also Raney nickel. Manufacture of monel metal, stainless steel, heat-resistant steel, heat-resistant and corrosion-resistant alloys, nickel-chromium resistance wire; alloys for electronic and space applications. Use Nickel is used in various alloys such as German silver, monel and nickel-chromium alloys; for coins; coins, metals, etc. In storage batteries; in spark plugs; and as a hydrogenation catalyst. Preparation Nickel is obtained by processing sulfide and laterite ore concentrates using pyrometallurgical and hydrometallurgical processes. The nickel matte powder obtained by roasting and smelting is further cleaned by electrometallurgical, steam and hydrometallurgical refining methods. A portion of the matte surface is baked to obtain commercially available nickel oxide agglomerates. 99.9% pure nickel can be obtained by electrolytic refining process. The purest nickel (99.97%) is obtained by vapor metallurgy. In this process, also known as the Mond Chemicalbook process, a mixture of nickel and copper sulfide is converted into oxides and then reduced by heating with water vapor at 350â??400 �° C. The resulting active form of nickel is treated with carbon monoxide to obtain volatile nickel carbonyl [Ni (CO) 4]. The reaction of the latter is reversible. Heating produces pure nickel and carbon monoxide. Overview Nickel is a slightly yellowish silvery-white metal, hard, easy to polish, magnetic (not as good as iron and cobalt) and good plasticity. Density 8.902g/cm3, melting point 1453 �° C, boiling point 2732 �° C. The chemical properties are relatively active. It has good corrosion resistance, is difficult to oxidize in air at room temperature, is not easy to react with concentrated nitric acid, and can resist alkali corrosion. Fine nickel wire is flammable, reacts with halogens when heated, and slowly dissolves in dilute acid. It can absorb a considerable amount of hydrogen. It is mainly used to make various alloys composed of iron, copper, zinc and other metals, and is widely used in cutting-edge technology, high-temperature ceramic products, corrosion-resistant alloys, chemical equipment, electronic and electrical equipment, special utensils, glass and other industries. Adding nickel to steel can improve the toughness and corrosion resistance of steel, such as nickel steel, chrome-nickel steel, etc.
