We offer Ammonium Nitrate in Granular and Crystalline forms.
Ammonium Sulphate Physical State ; Powder Color : White crystalline powder Cas No. 7783-20-2 Arsenic (As) ; NMT 0.00002% Calcium (Ca) : NMT 0.001% Magnesium (Mg) : NMT 0.0005% Non-volatile substances : NMT 0.01% Active Ingredient ; (NH4)2SO4% Assay : Min 99.5% PH Value ; Min. 4.5 Chloride : NMT 0.0003% Nitrates : PNMT 0.001% Iron ; NMT 0.0002% Heavy Metals (as Pb) ; NMT 0.0002% Phosphate (PO4) ; NMT 0.0005%
The primary use of Ammonium Sulphate is as a fertilizer for alkaline soils. In the soil the ammonium ion is released and forms a small amount of acid, lowering the pH balance of the soil, while contributing essential nitrogen for plant growth. The main disadvantage to the use of Ammonium Sulphate is its low nitrogen content relative to Ammonium Nitrate, which elevates transportation costs. It is also used as an agricultural spray adjuvant for water soluble insecticides, herbicides, and fungicides.
Micro silica also known as fume, is an amorphous (non-crystalline) polymorph of silicon dioxide, silica. It is an ultrafine powder collected as a by-product of the silicon and ferrosilicon alloy production and consists of spherical particles with an average particle diameter of 150 mm. The main field of application is as pozzolanic for high performance concrete because of its extreme fineness and high silica.
Applications :
Silica is added to Portland cement concrete to improve its properties, in particular its compressive strength, bond strength, and abrasion resistance. These improvements stem from both the mechanical improvements resulting from addition of a very fine powder to the cement paste mix as well as from the pozzolanic reactions between the silica fume and free calcium hydroxide in the paste.
Advantages :
Addition of silica also reduces the permeability of concrete to chloride ions, which protects the reinforcing steel of concrete from corrosion, especially in chloride-rich environments such as coastal regions and those of humid continental roadways and runways (because of the use of deicing salts) and saltwater bridges.
Silica Sand * Silica Sand is a type of sand usually available in the form of quartz. It is a hard and crystalline form of mineral components. * Silica sand is the most abundant mineral with the purity more than 99.0%. It is the preferred choice of consumption for various industrial purposes.
Mill scale, is formed on the outer surfaces of plates, sheets or profiles when they are being produced by rolling hot iron or steel billets in rolling or steel mills.
It looks like a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in color.
Being produced during the reheating, conditioning and hot rolling operation for the production of steel articles, the mill scale initially adheres to the steel surface and protects it from atmospheric corrosion, provided no break occurs in this coating.
From the chemical and physical analysis performed on the scrap, and according to the european environmental rules, the material has been classified as a special non dangerous waste, listed in green list
In particular the mill scale can be classified as follows:
Einecs (european commission no.): 266-007-8
Waste code: 10 02 10
Basel code: b 12 30
Hs code: 2619.00
We are glad to propose 500 MT of stain less steel mill scale.
Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products.
At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel.
The recovery ratio after melting in furnace for the most valuable alloy elements is:
- Ni: 3.5 - 4.5%
- Cr: 6-8%
From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows:
Waste code: 10 02 10
The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers.
Chemical analysis of the material is available on request.
Supplier: Gypsum rocks, gypsum powder, rock salt (industrial salt and deicing salt), food grade salt, sodium bicarbonate, limestone, white limestone (marble chips), sulphur (granular, lumps)
Appearance white granule
Particle size 2-4mm
Purity 99% min
Nitrogen 15.5% min
Nitrate Nitrogen 14.1%-14.4%
Ammoniacal Nitrogen 1.1%-1.3%
Calcium 19% min
Moisture 0.8% max
Water insoluble matter 0.2% max
Nitric 0.05% max
Iron 0.005% max
PH 5.6-6.8
